The milling-head machine tool is a sophisticated and high-quality machine tool of which the spindle system is made up of special multi-element structure. Two special mechanical configurations make the cutting performa...The milling-head machine tool is a sophisticated and high-quality machine tool of which the spindle system is made up of special multi-element structure. Two special mechanical configurations make the cutting performance of the machine tool decline. One is the milling head spindle supported on two sets of complex bearings. The mechanical dynamic rigidity of milling head structure is researched on designed digital prototype with finite element analysis（FEA） and modal synthesis analysis （ MSA ） for identifying the weak structures. The other is the ram structure hanging on milling head. The structure is researched to get dynamic performance on cutting at different ram extending positions. The analysis results on spindle and ram are used to improve the mechanical configurations and structure in design. The machine tool is built up with modified structure and gets better dynamic rigidity than it was before.展开更多
The effects of moisture content （8%, 10%and 12%）, variety （Tarom and Fajr） and parboiling on milling quality of rice as a function of milling recovery （MR）, head rice yield （HRY）, degree of milling （DOM） and...The effects of moisture content （8%, 10%and 12%）, variety （Tarom and Fajr） and parboiling on milling quality of rice as a function of milling recovery （MR）, head rice yield （HRY）, degree of milling （DOM） and whiteness were investigated. The parboiled grains was prepared with three soaking temperatures of 25 oC, 50 oC and 75 oC and three steaming times of 10, 15 and 20 min. As a result of parboiling, the increasing rates of MR and HRY values were 7.8%and 14.3%for Tarom and 9.8%and 10.0%for Fajr, respectively, and the decreasing rates for DOM and whiteness were 6.6%and 10.8%for Tarom and 6.8% and 10.5% for Fajr, respectively. Moreover, decreasing moisture content to 8%maximized MR （75.8% for Tarom and 74.3% for Fajr） and HRY （65.8% for Tarom and 57.0% for Fajr） while increasing that to 12%revealed maximum values of DOM （6.1%for Tarom and 6.2%for Fajr） and whiteness （24.8%for Tarom and 28.2%for Fajr）.展开更多
Theoretical investigation has shown a simple reaction water turbine would perform better when it spins faster. And for the simple reaction turbine water turbine to spin faster under constant water head, its diameter s...Theoretical investigation has shown a simple reaction water turbine would perform better when it spins faster. And for the simple reaction turbine water turbine to spin faster under constant water head, its diameter should be smaller. This paper reports on a performance analysis based on the experimental data collected from different performance tests carried on two simple reaction water turbine prototypes. Two new designs of simple reaction water turbines and their manufacturing methods are reported. The two turbines under investigation have different rotor diameters Φ 0.243 m and Φ 0.122 m. In case of the simple reaction water turbine the water enters into the turbine axially and exits tangentially through nozzles located on the outer periphery of the turbine. Further this paper will discuss the performance characteristics of stationary turbine i.e. zero power produced and performance characteristics of turbine producing power. It was found that rotor diameter affects the maximum rotational speed of the simple reaction turbine for constant supply head. It was also found that faster the turbine spins its performance improves. The two turbines were tested between supply head range of 1 m to 4 m.展开更多
基金supported by Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Municipality,China.
文摘The milling-head machine tool is a sophisticated and high-quality machine tool of which the spindle system is made up of special multi-element structure. Two special mechanical configurations make the cutting performance of the machine tool decline. One is the milling head spindle supported on two sets of complex bearings. The mechanical dynamic rigidity of milling head structure is researched on designed digital prototype with finite element analysis（FEA） and modal synthesis analysis （ MSA ） for identifying the weak structures. The other is the ram structure hanging on milling head. The structure is researched to get dynamic performance on cutting at different ram extending positions. The analysis results on spindle and ram are used to improve the mechanical configurations and structure in design. The machine tool is built up with modified structure and gets better dynamic rigidity than it was before.
基金Ferdowsi Universityof Mashhad,Iran for providing the laboratory facilitiesand financial support(Grant No.15226)
文摘The effects of moisture content （8%, 10%and 12%）, variety （Tarom and Fajr） and parboiling on milling quality of rice as a function of milling recovery （MR）, head rice yield （HRY）, degree of milling （DOM） and whiteness were investigated. The parboiled grains was prepared with three soaking temperatures of 25 oC, 50 oC and 75 oC and three steaming times of 10, 15 and 20 min. As a result of parboiling, the increasing rates of MR and HRY values were 7.8%and 14.3%for Tarom and 9.8%and 10.0%for Fajr, respectively, and the decreasing rates for DOM and whiteness were 6.6%and 10.8%for Tarom and 6.8% and 10.5% for Fajr, respectively. Moreover, decreasing moisture content to 8%maximized MR （75.8% for Tarom and 74.3% for Fajr） and HRY （65.8% for Tarom and 57.0% for Fajr） while increasing that to 12%revealed maximum values of DOM （6.1%for Tarom and 6.2%for Fajr） and whiteness （24.8%for Tarom and 28.2%for Fajr）.
文摘Theoretical investigation has shown a simple reaction water turbine would perform better when it spins faster. And for the simple reaction turbine water turbine to spin faster under constant water head, its diameter should be smaller. This paper reports on a performance analysis based on the experimental data collected from different performance tests carried on two simple reaction water turbine prototypes. Two new designs of simple reaction water turbines and their manufacturing methods are reported. The two turbines under investigation have different rotor diameters Φ 0.243 m and Φ 0.122 m. In case of the simple reaction water turbine the water enters into the turbine axially and exits tangentially through nozzles located on the outer periphery of the turbine. Further this paper will discuss the performance characteristics of stationary turbine i.e. zero power produced and performance characteristics of turbine producing power. It was found that rotor diameter affects the maximum rotational speed of the simple reaction turbine for constant supply head. It was also found that faster the turbine spins its performance improves. The two turbines were tested between supply head range of 1 m to 4 m.
