Modeling and Performance Analysis of UAV-Aided Millimeter Wave Cellular Networks with Stochastic Geometry

UAV-aided cellular networks,millimeter wave(mm-wave)communications and multi-antenna techniques are viewed as promising components of the solution for beyond-5G(B5G)and even 6G communications.By leveraging the power of stochastic geometry,this paper aims at providing an effective framework for modeling and analyzing a UAV-aided heterogeneous cellular network,where the terrestrial base stations(TBSs)and the UAV base stations(UBSs)coexist,and the UBSs are provided with mm-wave and multi-antenna techniques.By modeling the TBSs as a PPP and the UBSs as a Matern hard-core point pro-´cess of type II(MPH-II),approximated but accurate analytical results for the average rate of the typical user of both tiers are derived through an approximation method based on the mean interference-to-signal ratio(MISR)gain.The influence of some relevant parameters is discussed in detail,and some insights into the network deployment and optimization are revealed.Numerical results show that some trade-offs are worthy of being considered,such as the antenna array size,the altitude of the UAVs and the power control factor of the UBSs.

Off-Grid Compressed Channel Estimation with Parallel Interference Cancellation for Millimeter Wave Massive MIMO

Millimeter wave(mmWave)massive multiple-input multiple-output(MIMO)plays an important role in the fifth-generation(5G)mobile communications and beyond wireless communication systems owing to its potential of high capacity.However,channel estimation has become very challenging due to the use of massive MIMO antenna array.Fortunately,the mmWave channel has strong sparsity in the spatial angle domain,and the compressed sensing technology can be used to convert the original channel matrix into the sparse matrix of discrete angle grid.Thus the high-dimensional channel matrix estimation is transformed into a sparse recovery problem with greatly reduced computational complexity.However,the path angle in the actual scene appears randomly and is unlikely to be completely located on the quantization angle grid,thus leading to the problem of power leakage.Moreover,multiple paths with the random distribution of angles will bring about serious interpath interference and further deteriorate the performance of channel estimation.To address these off-grid issues,we propose a parallel interference cancellation assisted multi-grid matching pursuit(PIC-MGMP)algorithm in this paper.The proposed algorithm consists of three stages,including coarse estimation,refined estimation,and inter-path cyclic iterative inter-ference cancellation.More specifically,the angular resolution can be improved by locally refining the grid to reduce power leakage,while the inter-path interference is eliminated by parallel interference cancellation(PIC),and the two together improve the estimation accuracy.Simulation results show that compared with the traditional orthogonal matching pursuit(OMP)algorithm,the normalized mean square error(NMSE)of the proposed algorithm decreases by over 14dB in the case of 2 paths.

Millimeter-wave PA design techniques in ISSCC 2024

Millimeter-wave systems with high integration level have been rapidly developed to enable modern wireless communication,sensing,and imaging.The millimeter-wave power amplifier(PA)is one of the most challenging and critical components in a millimeter-wave transceiver,it is the last active stage in a transmitter amplifying spectrally efficient complex modulation signal for radiation with high output power.

High-Accuracy NLOS Identification Based on Random Forest and High-Precision Positioning on 60 GHz Millimeter Wave

60 GHz millimeter wave(mmWave)system provides extremely high time resolution and multipath components(MPC)separation and has great potential to achieve high precision in the indoor positioning.However,the ranging data is often contaminated by non-line-of-sight(NLOS)transmission.First,six features of 60GHz mm Wave signal under LOS and NLOS conditions are evaluated.Next,a classifier constructed by random forest(RF)algorithm is used to identify line-of-sight(LOS)or NLOS channel.The identification mechanism has excellent generalization performance and the classification accuracy is over 97%.Finally,based on the identification results,a residual weighted least squares positioning method is proposed.All ranging information including that under NLOS channels is fully utilized,positioning failure caused by insufficient LOS links can be avoided.Compared with the conventional least squares approach,the positioning error of the proposed algorithm is reduced by 49%.

An ISGW Filtering Antenna with Spurious Modes and Surface Wave Suppression for Millimeter Wave Communications

In this paper,an integrated substrate gap waveguide(ISGW)filtering antenna is proposed at millimeter wave band,whose surface wave and spurious modes are simultaneously suppressed.A secondorder filtering response is obtained through a coupling feeding scheme using one uniform impedance resonator(UIR)and two stepped-impedance resonators(SIRs).To increase the stopband width of the antenna,the spurious modes are suppressed by selecting the appropriate sizes of the ISGW unit cell.Furthermore,the ISGW is implemented to improve the radiation performance of the antenna by alleviating the propagation of surface wave.And an equivalent circuit is investigated to reveal the working principle of ISGW.To demonstrate this methodology,an ISGW filtering antenna operating at a center frequency of 25 GHz is designed,fabricated,and measured.The results show that the antenna achieves a stopband width of 1.6f0(center frequency),an out-of-band suppression level of 21 dB,and a peak realized gain of 8.5 dBi.

Cubature Kalman Filter Based Millimeter Wave Beam Tracking for OTFS Systems

In this paper,a Millimeter wave(mmWave)beam tracking problem is studied in orthogonal time frequency space(OTFS)systems.Considering the nonlinearity of beamforming and the constraints of existing Kalman-filtering based beam tracking schemes,we propose a novel Cubature Kalman Filter(CKF)framework tracking the channel state information(CSI)to manage the challenge of highspeed channel variation in single-user moving scene for OTFS systems.Aiming for low complexity for mobile settings,this paper trains only one beam pair to track a path to maintain the reliable communication link in the analog beamforming architecture.Simulation results show that our proposed method has better tracking performance to improve the accuracy of the estimated beam angle compared with prior work.

Erratum to “A robust beam tracking scheme for millimeter wave HetNets” [Digit. Commun. Network. 8 (6) (2022) 1115–1121]

The Editorial office regrets that a note about the affiliation of the first author Qing Xue was omitted in the initially published version of this paper.The note is that Qing Xue was co-first affiliated with the UESTC and CQUPT for the work of this paper.

Compressive near-field millimeter wave imaging algorithm based on Gini index and total variation mixed regularization

A compressive near-field millimeter wave(MMW)imaging algorithm is proposed.From the compressed sensing(CS)theory,the compressive near-field MMW imaging process can be considered to reconstruct an image from the under-sampled sparse data.The Gini index(GI)has been founded that it is the only sparsity measure that has all sparsity attributes that are called Robin Hood,Scaling,Rising Tide,Cloning,Bill Gates,and Babies.By combining the total variation(TV)operator,the GI-TV mixed regularization introduced compressive near-field MMW imaging model is proposed.In addition,the corresponding algorithm based on a primal-dual framework is also proposed.Experimental results demonstrate that the proposed GI-TV mixed regularization algorithm has superior convergence and stability performance compared with the widely used l1-TV mixed regularization algorithm.

Scalable Electrophysiology of Millimeter-Scale Animals with Electrode Devices

Millimeter-scale animals such as Caenorhabditis elegans,Drosophila larvae,zebrafish,and bees serve as powerful model organisms in the fields of neurobiology and neuroethology.Various methods exist for recording large-scale electrophysiological signals from these animals.Existing approaches often lack,however,real-time,uninterrupted investigations due to their rigid constructs,geometric constraints,and mechanical mismatch in integration with soft organisms.The recent research establishes the foundations for 3-dimensional flexible bioelectronic interfaces that incorporate microfabricated components and nanoelectronic function with adjustable mechanical properties and multidimensional variability,offering unique capabilities for chronic,stable interrogation and stimulation of millimeter-scale animals and miniature tissue constructs.This review summarizes the most advanced technologies for electrophysiological studies,based on methods of 3-dimensional flexible bioelectronics.A concluding section addresses the challenges of these devices in achieving freestanding,robust,and multifunctional biointerfaces.

Maintenance of Millimeter-level Geodetic Reference Framework

The high-precision terrestrial reference frame,as the spatial benchmark for geodesy,is an important national infrastructure.However,due to the influence of nonlinear factors related to geophysical phenomena,the overall maintenance accuracy of the ITRF framework is still at the centimeter level.Therefore,accurately characterizing the true trajectories of linear motion,nonlinear motion,and geocentric motion of the reference station is the key to achieve the construction and maintenance technology of a millimeter level terrestrial reference framework.Based on long-term global and regional GNSS observation data,more Chinese geodesy scientists devoted much efforts to the maintenance of millimeter-level geodetic reference framework.The main contributions of this work included the followings:①Dynamic maintenance of millimeter-level terrestrial reference frame;②Research progress on the method of maintenance of regional reference frame based on GNSS;③The progress of CGCS2000 frame maintenance in millimeter level accuracy;④Reprocessing and reanalysis of two-decade GNSS observation in continental China;⑤Research on current GNSS velocity field model and deformation in Chinese mainland;⑥The preliminary realization and evaluation of CTRF2020.

Non-intrusive soil carbon content quantification methods using machine learning algorithms:A comparison of microwave and millimeter wave radar sensors

Agricultural and forestry biomass can be converted to biochar through pyrolysis gasification,making it a significant carbon source for soil.Applying biochar to soil is a carbon-negative process that helps combat climate change,sustain soil biodiversity,and regulate water cycling.However,quantifying soil carbon content conventionally is time-consuming,labor-intensive,imprecise,and expensive,making it difficult to accurately measure in-field soil carbon’s effect on storage water and nutrients.To address this challenge,this paper for the first time,reports on extensive lab tests demonstrating non-intrusive methods for sensing soil carbon and related smart biochar applications,such as differentiating between biochar types from various biomass feedstock species,monitoring soil moisture,and biochar water retention capacity using portable microwave and millimeter wave sensors,and machine learning.These methods can be scaled up by deploying the sensor in-field on a mobility platform,either ground or aerial.The paper provides details on the materials,methods,machine learning workflow,and results of our investigations.The significance of this work lays the foundation for assessing carbon-negative technology applications,such as soil carbon content accounting.We validated our quantification method using supervised machine learning algorithms by collecting real soil mixed with known biochar contents in the field.The results show that the millimeter wave sensor achieves high sensing accuracy(up to 100%)with proper classifiers selected and outperforms the microwave sensor by approximately 10%–15%accuracy in sensing soil carbon content.

Submillimeter wave communication versus millimeter wave communication

This paper studies the performance of a submillimeter wave antenna operating between frequencies 0.1 THz and 10 THz with a 4-cyano-4-pentylbiphenyl[5CB]substrate.Since the size and shape of the antenna impact its gain/directivity,resonant frequency,bandwidth,and efficiency,the two antenna types considered in this paper are:(a)Rectangular Patch Antenna(RPA),and(b)Cylindrical Dielectric Resonator Antenna(CDRA).Here a submillimeter wave antenna is compared with a millimeter wave(a few GHz to 100 GHz)antenna.These popular mmwave antennas are chosen for the submillimeter wave antenna in order to understand changes in their performance as the result of changes in their geometrical shape.FEldberechnung bei Korpern mit beliebiger Oberflache(FEKO)software is used for the design and calculation of the Three-Dimensional(3D)ElectroMagnetic(EM)patterns.This paper also concentrates on the design and analysis of a massive submillimeter wave Multiple-Input Multiple-Output(MIMO)(8 by 8)RPA and CDRA.

Sub-Millimeter-Wave Transmission of Silk Fabric

Millimeter wave technology is one of the technologies developed rapidly in recent years. The research was mainly to study the transmission of millimeter wave through textile material named silk fabric. We observed the phenomenon of sub-millimeter-wave transmission and reflection of the silk fabric, and concluded that with the number of silk fabric layers increasing, effect of scattering and absorption of the millimeter wave enhanced. The conclusion could be further employed in millimeter wave and THz imaging, dangerous goods inspection and other security application.

Low Complexity Joint Hybrid Precoding for Millimeter Wave MIMO Systems

In millimeter wave(mmWave) multiple-input multiple-output(MIMO) systems, hybrid precoding has been widely used to overcome the severe propagation loss. In order to improve the spectrum efficiency with low complexity, we propose a joint hybrid precoding algorithm for single-user mmWave MIMO systems in this paper. By using the concept of equivalent channel, the proposed algorithm skillfully utilizes the idea of alternating optimization to complete the design of RF precoder and combiner. Then, the baseband precoder and combiner are computed by calculating the singular value decomposition of the equivalent channel. Simulation results demonstrate that the proposed algorithm can achieve satisfactory performance with quite low complexity. Moreover, we investigate the effects of quantization on the analog components and find that the proposed scheme is effective even with coarse quantization.

Radio Propagation and Wireless Coverage of LSAA-Based 5G Millimeter-Wave Mobile Communication Systems

Millimeter-wave(mm Wave) communications will be used in fifth-generation(5G) mobile communication systems, but they experience severe path loss and have high sensitivity to physical objects, leading to smaller cell radii and complicated network architectures. A coverage extension scheme using large-scale antenna arrays(LSAAs) has been suggested and theoretically proven to be cost-efficient in combination with ultradense small cell networks. To analyze and optimize the LSAA-based network deployments, a comprehensive survey of recent advances in statistical mmWave channel modeling is first presented in terms of channel parameter estimation, large-scale path loss models, and small-scale cluster models. Next, the measurement and modeling results at two 5G candidate mmWave bands(e.g., 28 GHz and 39 GHz) are reviewed and compared in several outdoor scenarios of interest, where the propagation characteristics make crucial contributions to wireless network designs. Finally, the coverage behaviors of systems employing a large number of antenna arrays are discussed, as well as some implications on future mmWave cellular network designs.

User Assisted Cooperative Relaying in Beamspace Massive MIMO NOMA Based Systems for Millimeter Wave Communications

A novel scheme‘user assisted cooperative relaying in beamspace massive multiple input multiple output(M-MIMO)non-orthogonal multiple access(NOMA)system’has been proposed to improve coverage area,spectrum and energy efficiency for millimeter wave(mmWave)communications.A downlink system for M users,where base station(BS)is equipped with beamforming lens antenna structure having NRF radio frequency(RF)chains,has been considered.A dynamic cluster of users is formed within a beam and the intermediate users(in that cluster)between beam source and destination(user)act as relaying stations.By the use of successive interference cancellation(SIC)technique of NOMA within a cluster,the relaying stations relay the symbols with improved power to the destination.For maximizing achievable sum rate,transmit precoding and dynamic power allocation for both intra and inter beam power optimization are implemented.Simulations for performance evaluation are carried out to validate that the proposed system outperforms the conventional beamspace M-MIMO NOMA system for mmWave communications in terms of spectrum and energy efficiency.

Assessment of FY-4A and Himawari-8 Cloud Top Height Retrieval through Comparison with Ground-Based Millimeter Radar at Sites in Tibet and Beijing

The accuracy of passive satellite cloud top height (CTH) retrieval shows regional dependence. This paper assesses the CTH derived from the FY-4A and Himawari-8 satellites through comparison with those from the ground-based millimeter radar at two sites: Yangbajing, Tibet, China (YBJ), and the Institute of Atmospheric Physics (IAP), Beijing, China. The comparison shows that Himawari-8 missed more CTHs at night than FY-4A, especially at YBJ. It is found that the CTH difference (CTHD;radar CTH minus satellite CTH) for FY-4A and Himawari-8 is 0.06 ± 1.90 km and −0.02 ± 2.40 km at YBJ respectively, and that is 0.93 ± 2.24 km and 0.99 ± 2.37 km at IAP respectively. The discrepancy between the satellites and radar at IAP is larger than that at YBJ. Both satellites show better performance for mid-level and low-level clouds than for high-level clouds at the two sites. The retrievals from FY-4A agree well with those from Himawari-8, with a mean difference of 0.08 km at YBJ and 0.06 km at IAP. It is found that the CTHD decreases as the cloud depth increases at both sites. However, the CTHD has no obvious dependence on cloud layers and fractions. Investigations show that aerosol concentration has little impact on the CTHD. For high and thin clouds, the CTHD increases gradually with the increase of the surface temperature, which might be a key factor causing the regional discrepancy between IAP and YBJ.

Quantized Hybrid Precoding Design for Millimeter-Wave Large-Scale MIMO Systems

Millimeter wave(mmWave) and large-scale multiple input multiple output(MIMO) are two emerging technologies in fifth-generation wireless communication systems. The power consumption and hardware cost of radio frequency(RF) chains increase exponentially with the bit resolution of analog-to-digital converters(ADCs) and digital-to-analog converters(DACs). One promising solution is to employ few RF chains with low-bit ADCs and DACs. In this paper, we consider mmWave large-scale MIMO systems with low bits DACs and ADCs. Leveraging on the Bussgang theorem and the additive quantization noise model(AQNM), a closed-form expression of the achievable rate is derived to show the effect of the ADCs? and DACs? resolution. Moreover, an orthogonal matching pursuit(OMP) based hybrid precoding algorithm is proposed to increase the achievable rate. Our results show that the impact of DACs is more pronounced than the impact of ADCs. Furthermore, 5-bit ADCs and DACs are sufficient at the transceiver to operate without a significant performance loss.

Study on the Technique of Passive Millimeter Wave Detector

In order to initiate the flight immediately when it reaches the top of the pedrail vehicle, technical parameters of radiometer have been designed and speedy effective signal processing method has been adopted. After analyzing the difference of signal characteristic between the main jam and the target, a method of identifying target in time domain is given. The target distinguishing rules are set up by extracting the magnitude, the slope and the width of the signal, combining with distinguishing the dimension of the target. The result of the theoretic analysis shows that the detecting scheme adopted can ensure the detector to identify and orientate the pedrail vehi cle＇s top armour, as well as control the detonation precisely.

A Low Power,High Sensitivity SiGe HBT Static Frequency Divider up to 90 GHz for Millimeter-Wave Application

A layout and connection optimization for static frequency divider is presented. The layout optimization provides a new circle topology transistors placement and reasonable connection structure, which reduces the parasitic effectively and enables self-oscillation frequency enhancement. Besides, bandwidth enhancement techniques based on a center-tap capacitor in input balun design and inductive peaking in latch design are adopted to improve further high frequency performance with low power consumption. As a proof of concept, design of a divide-by-2 static frequency divider in 0.13 μm SiGe BiCMOS technology is reported. With single-ended input clock signal, the divider is measured to be operated from 40 to 90 GHz. Phase noise measurements of a 90 GHz input clock signal indicate ideal behavior with no measurable noise contribution from the divider. The divider followed by a buffer that can deliver more than-10 dBm output power, which is sufficient to drive succeeding stage. To the author's knowledge, the divider exhibits a competitive power dissipation and the highest FOM among silicon based frequency dividers that operating higher than 70 GHz.