Intelligent Reflecting Surface Assisted Transmission Optimization Strategies in Wireless Networks

Wireless Power Transfer(WPT)technology can provide real-time power for many terminal devices in Internet of Things(IoT)through millimeterWave(mmWave)to support applications with large capacity and low latency.Although the intelligent reflecting surface(IRS)can be adopted to create effective virtual links to address the mmWave blockage problem,the conventional solutions only adopt IRS in the downlink from the Base Station(BS)to the users to enhance the received signal strength.In practice,the reflection of IRS is also applicable to the uplink to improve the spectral efficiency.It is a challenging to jointly optimize IRS beamforming and system resource allocation for wireless energy acquisition and information transmission.In this paper,we first design a Low-Energy Adaptive Clustering Hierarchy(LEACH)clustering protocol for clustering and data collection.Then,the problem of maximizing the minimum system spectral efficiency is constructed by jointly optimizing the transmit power of sensor devices,the uplink and downlink transmission times,the active beamforming at the BS,and the IRS dynamic beamforming.To solve this non-convex optimization problem,we propose an alternating optimization(AO)-based joint solution algorithm.Simulation results show that the use of IRS dynamic beamforming can significantly improve the spectral efficiency of the system,and ensure the reliability of equipment communication and the sustainability of energy supply under NLOS link.

Reliable Data Collection Model and Transmission Framework in Large-Scale Wireless Medical Sensor Networks

Large-scale wireless sensor networks(WSNs)play a critical role in monitoring dangerous scenarios and responding to medical emergencies.However,the inherent instability and error-prone nature of wireless links present significant challenges,necessitating efficient data collection and reliable transmission services.This paper addresses the limitations of existing data transmission and recovery protocols by proposing a systematic end-to-end design tailored for medical event-driven cluster-based large-scale WSNs.The primary goal is to enhance the reliability of data collection and transmission services,ensuring a comprehensive and practical approach.Our approach focuses on refining the hop-count-based routing scheme to achieve fairness in forwarding reliability.Additionally,it emphasizes reliable data collection within clusters and establishes robust data transmission over multiple hops.These systematic improvements are designed to optimize the overall performance of the WSN in real-world scenarios.Simulation results of the proposed protocol validate its exceptional performance compared to other prominent data transmission schemes.The evaluation spans varying sensor densities,wireless channel conditions,and packet transmission rates,showcasing the protocol’s superiority in ensuring reliable and efficient data transfer.Our systematic end-to-end design successfully addresses the challenges posed by the instability of wireless links in large-scaleWSNs.By prioritizing fairness,reliability,and efficiency,the proposed protocol demonstrates its efficacy in enhancing data collection and transmission services,thereby offering a valuable contribution to the field of medical event-drivenWSNs.

Enabling Efficient Data Transmission in Wireless Sensor Networks-Based IoT Application

The use of the Internet of Things(IoT)is expanding at an unprecedented scale in many critical applications due to the ability to interconnect and utilize a plethora of wide range of devices.In critical infrastructure domains like oil and gas supply,intelligent transportation,power grids,and autonomous agriculture,it is essential to guarantee the confidentiality,integrity,and authenticity of data collected and exchanged.However,the limited resources coupled with the heterogeneity of IoT devices make it inefficient or sometimes infeasible to achieve secure data transmission using traditional cryptographic techniques.Consequently,designing a lightweight secure data transmission scheme is becoming essential.In this article,we propose lightweight secure data transmission(LSDT)scheme for IoT environments.LSDT consists of three phases and utilizes an effective combination of symmetric keys and the Elliptic Curve Menezes-Qu-Vanstone asymmetric key agreement protocol.We design the simulation environment and experiments to evaluate the performance of the LSDT scheme in terms of communication and computation costs.Security and performance analysis indicates that the LSDT scheme is secure,suitable for IoT applications,and performs better in comparison to other related security schemes.

On Differentiation Among Pilot Signals of Multiple Mobile Targets in Retro-Reflective Beamforming for Wireless Power Transmission

An experimental study is conducted on several retro-reflective beamforming schemes for wireless power transmission to multiple wireless power receivers(referred to herein as“targets”).The experimental results demonstrate that,when multiple targets broadcast continuous-wave pilot signals at respective frequencies,a retro-reflective wireless power transmitter is capable of generating multiple wireless power beams aiming at the respective targets as long as the multiple pilot signals are explicitly separated from one another by the wireless power transmitter.However,various practical complications are identified when the pilot signals of multiple targets are not appropriately differentiated from each other by the wireless power transmitter.Specifically,when multiple pilot signals are considered to be carried by the same frequency,the wireless power transmission performance becomes heavily dependent on the interaction among the pilot signals,which is highly undesirable in practice.In conclusion,it is essential for a retro-reflective wireless power transmitter to explicitly discriminate multiple targets’pilot signals among each other.

Transmission Performance of the Optical Millimeter-wave Up-conversion Link Using a Phase Modulator

Numerically analyzed is the transmission performance of the optical millimeter （mm）-wave generated by frequency up-conversion via a phase modulator along the dispersive fiber. 60 GHz ram-wave subcarrier（SC） signals can be obtained after fiber transmission, simultaneously, the phase-modulated signals can be converted to the intensity-modulated ones. The numerical results show that the optical ram-wave at fading loops has better performance, and the eye diagram still keeps open when optical mm-wave signal is transmitted over 98 km.

Network Coding-based Reliable Broadcast Transmission in Wireless Networks

Recently, network coding has been applied to the loss recovery of reliable broadcast transmission in wireless networks. Since it was proved that fi nding the optimal set of lost packets for XOR-ing is a complex NP-complete problem, the available time-based retransmission scheme and its enhanced retransmission scheme have exponential computational complexity and thus are not scalable to large networks. In this paper, we present an efficient heuristic scheme based on hypergraph coloring and also its enhanced heuristic scheme to improve the transmission efficiency. Basically, our proposed schemes fi rst create a hypergraph according to the packet-loss matrix. Then our schemes solve the problem of generating XORed packets by coloring the edges of hypergraph. Extensive simulation results demonstrate that, the heuristic scheme based on hypergraph coloring and its enhanced scheme can achieve almost the same transmission efficiency as the available ones, but have much lower computational complexity, which is very important for the wireless devices without high computation capacity.

Power Line Monitoring Data Transmission Using Wireless Sensor Network

The WSN used in power line monitoring is long chain structure, and the bottleneck near the Sink node is more obvious. In view of this, A Sink nodes’ cooperation mechanism is presented. The Sink nodes from different WSNs are adjacently deployed. Adopting multimode and spatial multiplexing network technology, the network is constructed into multi-mode-level to achieve different levels of data streaming. The network loads are shunted and the network resources are rationally utilized. Through the multi-sink nodes cooperation, the bottlenecks at the Sink node and its near several jump nodes are solved and process the competition of communication between nodes by channel adjustment. Finally, the paper analyzed the method and provided simulation experiment results. Simulation results show that the method can solve the funnel effect of the sink node, and get a good QoS.

Tracking Galloping Profile of Transmission Lines Using Wireless Inertial Measurement Units

Galloping of power transmission lines might bring about huge damage such as massive power outage and collapse of the transmission towers. To realize forecast of the galloping and provide data for study on the galloping mechanism, this paper proposes an online monitoring system for tracking galloping profile of power transmission lines based on wireless inertial measurement units (WIMUs). The system is composed of three modules: wireless inertial measurement nodes, monitoring base station, and remote monitoring station. After detailing the hardware system, the corresponding software which positions and displays galloping profile of the transmission line in real-time is outlined. The feasibility of the proposed on-line monitoring system is demonstrated through a series of experiments at the State Grid Key Laboratory of Power Overhead Transmission Line Galloping (Zhengzhou, China) by taking into account different vibration patterns.

OFDM Wireless Downhole Transmission Systems and Proposed SLM Method for PAPR Reduction

At present, mud pulse transmission systems are widely used in downhole data transmission. But the systems are very low in transmission efficiency, only 5-10 bits/s, with very large anti-inter-symbol-interference (ISI). It cannot meet high requirements for high-speed transmission of modern logging system. The development of communication technology has laid some foundation for this requirement. For this purpose, the Orthogonal Frequency Division Multiplexing (OFDM) Wireless Downhole Transmission Systems are proposed for the first time because of their high transmission rate, anti-inter-symbol-interference (ISI), and high spectral efficiency, etc. Due to non-linear power amplifier (PA) of logging systems with limited dynamic range, the drawbacks of high peak-average power ratio (PAPR) may outweigh all the potential benefits of OFDM wireless downhole transmission systems. Selective mapping (SLM) method can reduce the PAPR of OFDM logging signals without distortion. But at the receiver, the conventional SLM method needs exact bits of side information (SI) to recover the data signal. The probability of erroneous SI detection has a significant influence on the error performance of the system. And individual transmissions of SI result in the reduction of bandwidth efficiency. To restore the exact data signal, our scheme codes the SI bits by linear block codes (LBC), and is easily decoded by syndrome decoding. And then the coding SI bits are superimposed onto the logging signals to omit SI bits transmission. The theory and simulation results show that the proposed method has better performance than the conventional one. Accordingly, the OFDM wireless downhole transmission systems can tackle the high PAPR problem, and highten the transmission rate of logging signals.

Autonomous UAV 3D trajectory optimization and transmission scheduling for sensor data collection on uneven terrains

This paper considers a time-constrained data collection problem from a network of ground sensors located on uneven terrain by an Unmanned Aerial Vehicle(UAV),a typical Unmanned Aerial System(UAS).The ground sensors harvest renewable energy and are equipped with batteries and data buffers.The ground sensor model takes into account sensor data buffer and battery limitations.An asymptotically globally optimal method of joint UAV 3D trajectory optimization and data transmission schedule is developed.The developed method maximizes the amount of data transmitted to the UAV without losses and too long delays and minimizes the propulsion energy of the UAV.The developed algorithm of optimal trajectory optimization and transmission scheduling is based on dynamic programming.Computer simulations demonstrate the effectiveness of the proposed algorithm.

Towards Converged Millimeter-Wave/Terahertz Wireless Communication and Radar Sensing

Converged communication and radar sensing systems have attained increasing attention in recent years.The development of converged radar-data systems is reviewed,with a special focus on millimeter/terahertz systems as a promising trend.Firstly,we present historical development and convergence technology concept for communication-radar systems,and highlight some emerging technologies in this area.We then provide an updated and comprehensive survey of several converged systems operating in different microwave and millimeter frequency bands,by providing some selective typical communication and radar sensing systems.In this part,we also summarize and compare the system performance in terms of maximum range/range resolution for radar mode and Bit Error Rate(BER)/wireless distance for communication mode.In the last section,the convergence of millimeter/terahertz communication-radar system is concluded by analyzing the prospect of millimeter-wave/terahertz technologies in providing ultrafast data rates and high resolution for our smart future.

Bidirectional secondary transmissions with energy harvesting in cognitive wireless sensor networks

To the existing spectrum sharing schemes in wireless-powered cognitive wireless sensor networks,the protocols are limited to either separate the primary and the secondary transmission or allow the secondary user to transmit signals in a time slot when it forwards the primary signal.In order to address this limitation,a novel cooperative spectrum sharing scheme is proposed,where the secondary transmission is multiplexed with both the primary transmission and the relay transmission.Specifically,the process of transmission is on a three-phase time-switching relaying basis.In the first phase,a cognitive sensor node SU1 scavenges energy from the primary transmission.In the second phase,another sensor node SU2 and primary transmitter simultaneously transmit signals to the SU1.In the third phase,the node SU1 can assist the primary transmission to acquire the opportunity of spectrum sharing.Joint decoding and interference cancellation technique is adopted at the receivers to retrieve the desired signals.We further derive the closed-form expressions for the outage probabilities of both the primary and secondary systems.Moreover,we address optimization of energy harvesting duration and power allocation coefficient strategy under performance criteria.An effective algorithm is then presented to solve the optimization problem.Simulation results demonstrate that with the optimized solutions,the sensor nodes with the proposed cooperative spectrum sharing scheme can utilize the spectrum in a more efficient manner without deteriorating the performance of the primary transmission,as compared with the existing one-directional scheme in the literature.

Design of intelligent detecting system based on wireless transmission

An intelligent detecting system based on wireless transmission is designed. Its hardware includes the card reading module, the wireless digital transmission module, the LCD module, the random password keyboard module and a 16×16 lattice word database based on e-Flash MM36SB020. Its software is a communication protocol between the central control computer and the entrance management base station. To resolve the conflicting problems occurred during the data transmission, a method of delaying time at random is proposed.

A New Method to Improve Performance of Cooperative Underwater Acoustic Wireless Sensor Networks via Frequency Controlled Transmission Based on Length of Data Links

In this paper a new method to improve performance of cooperative underwater acoustic (UWA) sensor networks will be introduced. The method is based on controlling and optimizing carrier frequencies which are used in data links between network nods. In UWA channels Pathloss and noise power spectrum density (psd) are related to carrier frequency. Therefore, unlike radio communications, in UWA Communications signal to noise ratio (SNR) is related to frequency besides propagation link length. In such channels an optimum frequency in whole frequency band and link lengths cannot be found. In Cooperative transmission, transmitter sends one copy of transmitted data packets to relay node. Then relay depending on cooperation scheme, amplifies or decodes each data packet and retransmit it to destination. Receiver uses and combines both received signals to estimate transmitted data. This paper wants to propose a new method to decrease network power consumptions by controlling and sub-optimizing transmission frequency based on link length. For this purpose, underwater channel parameters is simulated and analyzed in 1km to 10km lengths (midrange channel). Then link lengths sub categorized and in each category, optimum frequency is computed. With these sub optimum frequencies, sensors and base station can adaptively control their carrier frequencies based on link length and decrease network’s power consumptions. Finally Different Cooperative transmission schemes “Decode and Forward (DF)” and “Amplify and Forward (AF)”, are simulated in UWA wireless Sensor network with and without the new method. In receiver maximum ratio combiner (MRC) is used to combining received signals and making data estimations. Simulations show that the new method, called AFC cooperative UWA communication, can improve performance of underwater acoustic wireless sensor networks up to 40.14%.

Gradient based restoration of coal mine images obtained by underground wireless transmissions

Curvature-driven diffusion (CDD) principles were used to develop a novel gradient based image restora- tion algorithm. The algorithm fills in blocks of missing data in a wireless image after transmission through the network. When images are transmitted over fading channels, especially in the severe circum- stances of a coal mine, blocks of the image may be destroyed by the effects of noise. Instead of using com- mon retransmission query protocols the lost data is reconstructed by using the adaptive curvature-driven diffusion (ACDD) image restoration algorithm in the gradient domain of the destroyed image. Missing blocks are restored by the method in two steps: In step one, the missing blocks are filled in the gradient domain by the ACDD algorithm; in step two, and the image is reconstructed from the reformed gradients by solving a Poisson equation. The proposed method eliminates the staircase effect and accelerates the convergence rate. This is demonstrated by experimental results.

Design and Optimization of Inductive Wireless Power Transmission System

The inductive wireless power transmission system is actually applied to the principle of magnetic field coupling, com- bined with the flexibility of the electrical equipment to achieve flexible and safe power supply. In the realization process of wird^ power transmission, the key point lies in the transmission efficiency and power transmission capability. However, wireless trans-mission still has some disadvantages in these two aspects. In this case, there is an air gap between the transmitting winding and the receiving winding. If it is too large and the coupling coefficient is too low, in view of this situation, it is necessary to carry out re-search from aspects such as raising the coupling coefficient and controlling the air gap. The article firstly describes the development ofwireless power transmission technology and transmission principles, etc. Secondly, it analyzes the output control ofwireless power fransmission systems. Uird,it conducts simulation analysis using loosely coupling transfomers and proposes an optimized solution. The simulation design and inspection process were proposed. The main purpose of this paper is to analyze the current wireless energy transmission system and clarify the direction in which it should be strengthened. The significance of this study is to provide a feasible direction for the further optimization of the wireless energy transmission system.

Battery Charger for Electric Vehicles based on a Wireless Power Transmission

In this paper,the case of a battery charger for electric vehicles based on a wireless power transmission is addressed.The specificity of every stage of the overall system is presented.Based on calculated and measured results,relevant capacitive compensations of the transformer and models are suggested and discussed in order to best match the operating mode and aiming at simplifying as much as possible the control and the electronics of the charger.

Secure Transmission Scheme Based on Dual-Thresholds for Simultaneous Wireless Information and Power Transfer

This paper studies a simultaneous wireless information and power transfer system with multiple external eavesdroppers and internal curious users.We model the random network by Poisson cluster process in consideration of the case where eavesdroppers hide around certain targets.Focusing on the users that work in harvesting-transmitting mode with time switching receivers,we establish communication model via time division multiple access.On this basis,we propose a lightweight secure transmission scheme based on dual-thresholds for physical-layer security enhancement,which consists of two protocols applied to the downlink(DL) and uplink(UL) transmission respectively.In the DL,we design a dynamic information-power switching transmission protocol based on signal-to-noise ratio threshold,which provides an opportunistic approach to reform the fixed period allocation of information and power transfer;in the UL,an energy threshold is proposed for users to control the transmission,which is called a user-led on-off transmission protocol.Furthermore,we give a comprehensive performance analysis for the proposed scheme in terms of delay,reliability,security and secrecy throughput.Based on the analysis results,we optimize the two thresholds and the DL-UL allocationcoefficient to maximize the secrecy throughput.Simulation results show the proposed scheme can bring about a substantial secrecy gain.

Best-retransmission count selection for environment optimization over wireless heterogeneous networks

This paper proposes an environment-aware best- retransmission count selected optimization control scheme over IEEE 802.11 multi-hop wireless networks. The proposed scheme predicts the wireless resources by using statistical channel state and provides maximum retransmission count optimization based on wireless channel environment state to improve the packet delivery success ratio. The media access control （MAC） layer selects the best-retransmission count by perceiving the types of packet loss in wireless link and using the wireless channel charac- teristics and environment information, and adjusts the packet for- warding adaptively aiming at improving the packet retransmission probability. Simulation results show that the best-retransmission count selected scheme achieves a higher packet successful delivery percentage and a lower packet collision probability than the corresponding traditional MAC transmission control protocols.

Theoretical Design of Energy Harvesting Module or Wireless Power Transmission Receiver Using Magnetic Field of 0.2 mT at 60 Hz

This paper presents a theoretical design method for a magnetic energy harvesting module. This module consists of an air-core coil and resonant capacitor. With a simple RLC circuit model, it can derive an equation of harvesting energy as a function of coil size. In order to demonstrate the magnetic field, a uniform magnetic field is generated by the developed coil system. From the experimented results, it is successfully demonstrated 100 mW of energy harvesting from a magnetic field of 0.09 mT at 60 Hz. This value is in good agreement with the estimated results. Harvested energy is proportional to the square of the magnetic flux density. However, ICNIRP2010 provides a guideline that an acceptable level for human health in a public space is 0.2 mT at power-line frequency. This paper also discuss the possibilities of several applications related with both magnetic energy harvesting and wireless power transmission.