Manganese (Mn) is an essential element for human body. However, elevated concentration of manganese causes severe problem and disease. Acid mine drainage (AMD), wastewater generated due to open-pit mining, commonly co...Manganese (Mn) is an essential element for human body. However, elevated concentration of manganese causes severe problem and disease. Acid mine drainage (AMD), wastewater generated due to open-pit mining, commonly contains Mn with exceeded concentration. This study is to investigate the improvement of ball-milling modified Indonesian natural bentonite (INB) for manganese (Mn) removal from AMD and to increase the pH through batch and column sorption test as a passive treatment system approach. The batch sorption test result showed the maximum Mn adsorbed (Qm) on INB from the Langmuir model increased from 4.69 to 17.12 mg/g after milling. The column sorption test result also showed the amount of Mn adsorbed on INB until breakthrough time (qu) and until saturation time (q) increased after milling. The qu increased from 1.27 to 10.06 mg/g, and the q increased from 4.55 to 12.91 mg/g. The mass transfer zone (MTZ) became significantly shorter after milling from 0.22 to 0.07 cm. The Thomas model exhibited the equilibrium uptake of Mn (q0) increased after milling from 3.91 to 13.72 mg/g. In equilibrium condition, both unmilled and milled INB showed the pH increased from ≈3 to 8.展开更多
Underground mining always create voids.These voids can cause subsidence of surface.So it is always a demand to fill the void in such a manner that the effect of underground mining can be minimized.Void filling using m...Underground mining always create voids.These voids can cause subsidence of surface.So it is always a demand to fill the void in such a manner that the effect of underground mining can be minimized.Void filling using mill tailings especially in metal mining is one of the best techniques.The tailings produced in milling process have traditionally been disposed in tailing ponds creating a waste disposal and environmental problems in terms of land degradation,air and water pollution,etc.This disposal practice is more acute in the metal milling industry where the fine grinding,required for value liberation,results in the production of very fine tailings in large percentage.This paper includes discussions on the effectiveness of different paste mixes with varying cement contents in paste backfilling operations.The results revealed that material composition and use of super plasticizer strongly influenced the strength of cemented backfill.展开更多
Based on a case study on uranium mine No.765 of China National Nuclear Corporation (CNNC), the paper briefly describes disposal program and effect of decommissioning uranium mine/mill facilities and quantitatively...Based on a case study on uranium mine No.765 of China National Nuclear Corporation (CNNC), the paper briefly describes disposal program and effect of decommissioning uranium mine/mill facilities and quantitatively evaluates radon fluxes and doses to man of gaseous airborne pathway from mill tailings and mining debris before and after decommissioning, including annual individual effective dose to critical groups and annual collective effective dose to the population within 80 km region of the facilities.展开更多
文摘Manganese (Mn) is an essential element for human body. However, elevated concentration of manganese causes severe problem and disease. Acid mine drainage (AMD), wastewater generated due to open-pit mining, commonly contains Mn with exceeded concentration. This study is to investigate the improvement of ball-milling modified Indonesian natural bentonite (INB) for manganese (Mn) removal from AMD and to increase the pH through batch and column sorption test as a passive treatment system approach. The batch sorption test result showed the maximum Mn adsorbed (Qm) on INB from the Langmuir model increased from 4.69 to 17.12 mg/g after milling. The column sorption test result also showed the amount of Mn adsorbed on INB until breakthrough time (qu) and until saturation time (q) increased after milling. The qu increased from 1.27 to 10.06 mg/g, and the q increased from 4.55 to 12.91 mg/g. The mass transfer zone (MTZ) became significantly shorter after milling from 0.22 to 0.07 cm. The Thomas model exhibited the equilibrium uptake of Mn (q0) increased after milling from 3.91 to 13.72 mg/g. In equilibrium condition, both unmilled and milled INB showed the pH increased from ≈3 to 8.
文摘Underground mining always create voids.These voids can cause subsidence of surface.So it is always a demand to fill the void in such a manner that the effect of underground mining can be minimized.Void filling using mill tailings especially in metal mining is one of the best techniques.The tailings produced in milling process have traditionally been disposed in tailing ponds creating a waste disposal and environmental problems in terms of land degradation,air and water pollution,etc.This disposal practice is more acute in the metal milling industry where the fine grinding,required for value liberation,results in the production of very fine tailings in large percentage.This paper includes discussions on the effectiveness of different paste mixes with varying cement contents in paste backfilling operations.The results revealed that material composition and use of super plasticizer strongly influenced the strength of cemented backfill.
文摘Based on a case study on uranium mine No.765 of China National Nuclear Corporation (CNNC), the paper briefly describes disposal program and effect of decommissioning uranium mine/mill facilities and quantitatively evaluates radon fluxes and doses to man of gaseous airborne pathway from mill tailings and mining debris before and after decommissioning, including annual individual effective dose to critical groups and annual collective effective dose to the population within 80 km region of the facilities.
