Traditionally the deformation resistance in creep is characterized by the minimum creep rate εmin and its sensitivity to stress (stress exponent n) and temperature (activation energy Q). Various values of constan...Traditionally the deformation resistance in creep is characterized by the minimum creep rate εmin and its sensitivity to stress (stress exponent n) and temperature (activation energy Q). Various values of constant n have been reported in the literature and interpreted in terms of specific mechanisms. The present case study of coarse-grained Cu at 573 K yields a stress exponent n = 9 for εmin. in tension and a relatively low activation energy. The evolution of the deformation resistance with strain at constant tensile creep load and comparison with creep in compression without fracture indicates that the tensile εmin. result from transition from uniform deformation to strain localization during fracture. This is confirmed by the results of creep in compression where fracture is suppressed. Both the tensile εmin, and the compressive creep rate at strains around 0.3 can be described using existing equations for quasi-stationary deformation containing the subgrain boundary misorientation θ as structure parameter. While in the latter case constant θ leads to monotonic increase of n with stress, the tensile nine-power-law results from variable θ, and has no simple meaning. The result of this case study means that uncritical interpretation of minimum tensile creep rates as stationary ones bears a high risk of systematic errors in the determination of creep parameters and identification of creep mechanisms.展开更多
According to more recent work,the Wilshire equations have shown good prediction accuracy in a wide range of materials and stress-temperature conditions,particularly in extrapolation of short term results to long term ...According to more recent work,the Wilshire equations have shown good prediction accuracy in a wide range of materials and stress-temperature conditions,particularly in extrapolation of short term results to long term predictions.In the current paper,this methodology was further developed for modeling anisotropic creep characteristics(i.e.minimum creep strain εmin ,stress rupture life tf and time to a specified strain tε)of four typical Ni-based directionally solidified(DS)and single crystal(SC)superalloys,where a simple orientation factor related to the ultimate tensile strength(UTS)was introduced.The application of these simplistic approaches showed that the anisotropic creep characteristics in a wide range of stress-temperature conditions can be accurately simulated.Meanwhile,during the application of the modified Wilshire equations,break points occurring at the specified stress levels agree well with the transition of creep deformation mechanisms occurring in different stress regions,which provides confidence for using this method.展开更多
基金supported by the project CZ.1.05/1.1.00/02.0068 granted by the European Regional Development Fund
文摘Traditionally the deformation resistance in creep is characterized by the minimum creep rate εmin and its sensitivity to stress (stress exponent n) and temperature (activation energy Q). Various values of constant n have been reported in the literature and interpreted in terms of specific mechanisms. The present case study of coarse-grained Cu at 573 K yields a stress exponent n = 9 for εmin. in tension and a relatively low activation energy. The evolution of the deformation resistance with strain at constant tensile creep load and comparison with creep in compression without fracture indicates that the tensile εmin. result from transition from uniform deformation to strain localization during fracture. This is confirmed by the results of creep in compression where fracture is suppressed. Both the tensile εmin, and the compressive creep rate at strains around 0.3 can be described using existing equations for quasi-stationary deformation containing the subgrain boundary misorientation θ as structure parameter. While in the latter case constant θ leads to monotonic increase of n with stress, the tensile nine-power-law results from variable θ, and has no simple meaning. The result of this case study means that uncritical interpretation of minimum tensile creep rates as stationary ones bears a high risk of systematic errors in the determination of creep parameters and identification of creep mechanisms.
基金supported by the National Natural Science Foundation of China(Grand No.NSFC 51275023)the Innovation Foundation of BUAA for PhD Graduates(Grand No.YWF-14-YJSY-49)
文摘According to more recent work,the Wilshire equations have shown good prediction accuracy in a wide range of materials and stress-temperature conditions,particularly in extrapolation of short term results to long term predictions.In the current paper,this methodology was further developed for modeling anisotropic creep characteristics(i.e.minimum creep strain εmin ,stress rupture life tf and time to a specified strain tε)of four typical Ni-based directionally solidified(DS)and single crystal(SC)superalloys,where a simple orientation factor related to the ultimate tensile strength(UTS)was introduced.The application of these simplistic approaches showed that the anisotropic creep characteristics in a wide range of stress-temperature conditions can be accurately simulated.Meanwhile,during the application of the modified Wilshire equations,break points occurring at the specified stress levels agree well with the transition of creep deformation mechanisms occurring in different stress regions,which provides confidence for using this method.