To improve localization accuracy, the spherical microphone arrays are used to capture high-order wavefield in- formation. For the far field sound sources, the array signal model is constructed based on plane wave deco...To improve localization accuracy, the spherical microphone arrays are used to capture high-order wavefield in- formation. For the far field sound sources, the array signal model is constructed based on plane wave decomposition. The spatial spectrum function is calculated by minimum variance distortionless response （MVDR） to scan the three-dimensional space. The peak values of the spectrum function correspond to the directions of multiple sound sources. A diagonal loading method is adopted to solve the ill-conditioned cross spectrum matrix of the received signals. The loading level depends on the alleviation of the ill-condition of the matrix and the accuracy of the inverse calculation. Compared with plane wave decomposition method, our proposed localization algorithm can acquire high spatial resolution and better estimation for multiple sound source directions, especially in low signal to noise ratio （SNR）.展开更多
针对频控阵(frequency diverse array,FDA)在对与目标位置相近的平台外干扰进行抑制时,传统FDA与非线性频偏结合不能实现距离-角度去耦合、对数递增FDA主瓣展宽较大和汉明窗加权FDA距离维旁瓣过高的问题,在充分研究汉明窗加权的线性FDA(...针对频控阵(frequency diverse array,FDA)在对与目标位置相近的平台外干扰进行抑制时,传统FDA与非线性频偏结合不能实现距离-角度去耦合、对数递增FDA主瓣展宽较大和汉明窗加权FDA距离维旁瓣过高的问题,在充分研究汉明窗加权的线性FDA(Hamming linear FDA,HL-FDA)方案的基础上,对4种频偏方案的性能进行了分析,提出采用FDA多输入多输出结构代替传统的一维均匀线性FDA结构,通过结合最小方差无失真响应(minimum variance distortion free respinse,MVDR)准则,将HL-FDA应用到MVDR自适应波束形成层面,对平台外干扰进行抑制。仿真验证了HL-FDA在结合MVDR自适应波束形成算法后能有效地对抗距离-角度二维平台外干扰。展开更多
The noncontact blade tip timing(BTT)measurement has been an attractive technology for blade health monitoring(BHM).However,the severe undersampled BTT signal causes a significant challenge for blade vibration paramete...The noncontact blade tip timing(BTT)measurement has been an attractive technology for blade health monitoring(BHM).However,the severe undersampled BTT signal causes a significant challenge for blade vibration parameter identification and fault feature extraction.This study proposes a novel method based on the minimum variance distortionless response(MVDR)of the direction of arrival(DoA)estimation for blade natural frequency estimation from the non-uniformly undersampled BTT signals.First,based on the similarity between the general data acquisition model for BTT and the antenna array model in DoA estimation,the circumferentially arranged probes on the casing can be regarded as a non-uniform linear array.Thus,BTT signal reconstruction is converted into the DoA estimation problem of the non-uniform linear array signal.Second,MVDR is employed to address the severe undersampling issue and recover the BTT undersampled signal.In particular,spatial smoothing is innovatively utilized to enhance the estimation of covariance matrix of the BTT signal to avoid ill-condition or singularity,while improving efficiency and robustness.Lastly,numerical simulation and experimental testing are employed to verify the validity of the proposed method.Monte Carlo simulation results suggest that the proposed method behaves better than conventional methods,especially under a lower signal-to-noise ratio condition.Experimental results indicate that the proposed method can effectively overcome the severe undersampling problem of BTT signal induced by physical limitations,and has a strong potential in the field of BHM.展开更多
This paper presents a hardware architecture using mixed pipeline and parallel processing for complex division based on dichotomous coordinate descent(DCD) iterations. The objective of the proposed work is to achieve l...This paper presents a hardware architecture using mixed pipeline and parallel processing for complex division based on dichotomous coordinate descent(DCD) iterations. The objective of the proposed work is to achieve low-latency and resource optimized complex divider architecture in adaptive weight computation stage of minimum variance distortionless response(MVDR)algorithm. In this work, computation of complex division is modeled as a 2×2 linear equation solution problem and the DCD algorithm allows linear systems of equations to be solved with high degree of computational efficiency. The operations in the existing DCD algorithm are suitably parallel pipelined and the performance is optimized to 2 clock cycles per iteration. To improve the degree of parallelism, a parallel column vector read architecture is devised.The proposed work is implemented on the field programmable gate array(FPGA) platform and the results are compared with state-of-art literature. It concludes that the proposed architecture is suitable for complex division in adaptive weight computation stage of MVDR beamformer. We demonstrate the performance of the proposed architecture for MVDR beamformer employed in medical ultrasound imaging applications.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant No.61001160)the Doctoral Foundation of Ministry of Education (Grant No.20093108120018)the Shanghai Leading Academic Discipline Project (Grant No.S30108)
文摘To improve localization accuracy, the spherical microphone arrays are used to capture high-order wavefield in- formation. For the far field sound sources, the array signal model is constructed based on plane wave decomposition. The spatial spectrum function is calculated by minimum variance distortionless response （MVDR） to scan the three-dimensional space. The peak values of the spectrum function correspond to the directions of multiple sound sources. A diagonal loading method is adopted to solve the ill-conditioned cross spectrum matrix of the received signals. The loading level depends on the alleviation of the ill-condition of the matrix and the accuracy of the inverse calculation. Compared with plane wave decomposition method, our proposed localization algorithm can acquire high spatial resolution and better estimation for multiple sound source directions, especially in low signal to noise ratio （SNR）.
文摘针对频控阵(frequency diverse array,FDA)在对与目标位置相近的平台外干扰进行抑制时,传统FDA与非线性频偏结合不能实现距离-角度去耦合、对数递增FDA主瓣展宽较大和汉明窗加权FDA距离维旁瓣过高的问题,在充分研究汉明窗加权的线性FDA(Hamming linear FDA,HL-FDA)方案的基础上,对4种频偏方案的性能进行了分析,提出采用FDA多输入多输出结构代替传统的一维均匀线性FDA结构,通过结合最小方差无失真响应(minimum variance distortion free respinse,MVDR)准则,将HL-FDA应用到MVDR自适应波束形成层面,对平台外干扰进行抑制。仿真验证了HL-FDA在结合MVDR自适应波束形成算法后能有效地对抗距离-角度二维平台外干扰。
基金the National Natural Science Foundation of China(Grant Nos.52105117 and 51875433)the Funds for Distinguished Young Talent of Shaanxi Province,China(Grant No.2019JC-04).
文摘The noncontact blade tip timing(BTT)measurement has been an attractive technology for blade health monitoring(BHM).However,the severe undersampled BTT signal causes a significant challenge for blade vibration parameter identification and fault feature extraction.This study proposes a novel method based on the minimum variance distortionless response(MVDR)of the direction of arrival(DoA)estimation for blade natural frequency estimation from the non-uniformly undersampled BTT signals.First,based on the similarity between the general data acquisition model for BTT and the antenna array model in DoA estimation,the circumferentially arranged probes on the casing can be regarded as a non-uniform linear array.Thus,BTT signal reconstruction is converted into the DoA estimation problem of the non-uniform linear array signal.Second,MVDR is employed to address the severe undersampling issue and recover the BTT undersampled signal.In particular,spatial smoothing is innovatively utilized to enhance the estimation of covariance matrix of the BTT signal to avoid ill-condition or singularity,while improving efficiency and robustness.Lastly,numerical simulation and experimental testing are employed to verify the validity of the proposed method.Monte Carlo simulation results suggest that the proposed method behaves better than conventional methods,especially under a lower signal-to-noise ratio condition.Experimental results indicate that the proposed method can effectively overcome the severe undersampling problem of BTT signal induced by physical limitations,and has a strong potential in the field of BHM.
基金supported by Microelectronics Division of the Ministry of Electronics and Information Technology,Government of India,under SMDP-C2SD Project(9(1)/2014–MDD)
文摘This paper presents a hardware architecture using mixed pipeline and parallel processing for complex division based on dichotomous coordinate descent(DCD) iterations. The objective of the proposed work is to achieve low-latency and resource optimized complex divider architecture in adaptive weight computation stage of minimum variance distortionless response(MVDR)algorithm. In this work, computation of complex division is modeled as a 2×2 linear equation solution problem and the DCD algorithm allows linear systems of equations to be solved with high degree of computational efficiency. The operations in the existing DCD algorithm are suitably parallel pipelined and the performance is optimized to 2 clock cycles per iteration. To improve the degree of parallelism, a parallel column vector read architecture is devised.The proposed work is implemented on the field programmable gate array(FPGA) platform and the results are compared with state-of-art literature. It concludes that the proposed architecture is suitable for complex division in adaptive weight computation stage of MVDR beamformer. We demonstrate the performance of the proposed architecture for MVDR beamformer employed in medical ultrasound imaging applications.
