Time-domain characteristics of overlying strata failure under condition of longwall ascending mining

Ascending mining is one of the most effective ways to solve problems of water inrush, gas outburst and rock burst in coal seams mining. In order to reveal the law of motion and spatiotemporal relationship of overlaying strata, field measurement has been done in a mine. Long distance drillings were constructed from 4# coal seam to 6# coal seam at several certain typical positions, and movement and failure law of overlying strata after mining was analyzed by drilling video and observing the fluid leakage. Besides, we also analyzed the spatiotemporal development law of overlying strata failure with different mining heights and time intervals in the lower coal seam. The results show that: ascending mining is significantly affected by time-domain characteristics of overlaying strata failure after the lower coal seam's mining, height equations of caving zone and fractured zone are given in this paper, and the feasibility of ascending mining was compartmentalized concretely according to the spatiotemporal relationship. Research methods and conclusions of this paper have certain referential significance for the study of ascending mining, mining under water, mining under building, mining under railway and stress-relief mining.

A probe into“mining technique in the condition of floor failure”for coal seam above longwall goafs

Targeting at the coal seam with useful value discarded above goafs,attempted to explore the feasibility of'mining technique in the condition of floor failure' from theoretical point of view,and predicted.It indicated that mining technique in the condition of floor failure used above Longwall Goafs in Baijiazhuang Mining is totally feasible.At law,the deformation of the floor in the mining technique by means of probability-integral method.And it is discov- ered that deformed basin can emerge in the footwall of No.6 coal seam and its maximum subsidence was possibly 1 633 mm or so and its maximum positive curvature is 61.74/10^(-3). At last,it therefore suggests appropriate ground pressure control measures as strengthening observation of ground pressure and adopting false slope for exploitation and strengthening support for reasonable push and slide based on the adverse ground pressure behaviors possibly occurring in the mining technique.This serves to gather data and lay sturdy founda- tion for further probe into the mining technique,and offers theoretical and technical grounds for concrete implementation of the mining technique.

Failure characteristics of surface vertical wells for relieved coal gas and their influencing factors in Huainan mining area

Based on data from through-hole and logging,we studied the failure characteristics of surface drainage wells for relieved coal gas in Huainan mining area and its influencing factors.The results show that the damaged positions of drainage wells are mainly located at the thick clay layer in the low alluvium and the lithological interface in the upper section of bedrock in west mining area.The failure depth of casing is 244-670 m and concentrates at about 270-460 m deep.These damaged positions are mainly located in the bending zone according to three zones of rock layers in the vertical section above the roof divided. Generally,the casing begins to deform or damage before the face line about 30-150 m.Special formation structure and rock mass properties are the direct causes of the casing failure,high mining height and fast advancing speed are fundamental reasons for rock mass damage.However,the borehole configuration and spacing to the casing failure are not very clear.