Mechanism,prevention,and control of mining-induced dynamic disasters in underground metal mines in China:Challenges and solutions

Metal mineral resources play an indispensable role in the development of the national economy.Dynamic disasters in underground metal mines seriously threaten mining safety,which are major scientific and technological problems to be solved urgently.In this article,the occurrence status and grand challenges of some typical dynamic disasters involving roof falling,spalling,collapse,large deformation,rockburst,surface subsidence,and water inrush in metal mines in China are systematically presented,the characteristics of mining-induced dynamic disasters are analyzed,the examples of dynamic disasters occurring in some metal mines in China are summarized,the occurrence mechanism,monitoring and early warning methods,and prevention and control techniques of these disasters are highlighted,and some new opinions,suggestions,and solutions are proposed simultaneously.Moreover,some shortcomings in current disaster research are pointed out,and the direction of efforts to improve the prevention and control level of dynamic disasters in China’s metal mines in the future is prospected.The integration of forward-looking key innovative theories and technologies in the abovementioned aspects will greatly enhance the cognitive level of disaster prevention and mitigation in China’s metal mining industry and achieve a significant shift from passive disaster relief to active disaster prevention.

Training of Infection Prevention and Control to Healthcare Workers of Mining Health Facilities: A Shared Responsibility for Improving Safety of Mining Communities

Introduction: Without appropriately trained healthcare workers (HCWs), infection prevention and control (IPC) cannot be implemented according to set standards. Although training is crucial, authorities rarely consider those working in health facilities owned by the mining. We describe the training which was conducted in North Mara in Mara region mining health facilities. Methods: This was descriptive study on the training of IPC to HCWs of mining health facilities. The training was conducted to North Mara Gold Mine Limited on April 2024. We targeted the HCWs and supporting staff working in the health facilities of the mining communities. The duration of the training was five days. The sessions started with pre-training test to evaluate what participants understood before training and followed with training itself. The training was carried out using mixed adult learning methods like: illustrated lectures, demonstrations, brainstorming, small group activities, group discussions, role plays, case studies and simulations. The training was finalized with posttest. Results: A total of ten HCWs were trained out of 13 of the facility. In that training six were males and four were females. Also, out of the ten trained three were clinicians, four nurses, one lab technician, one pharmaceutical technician, one support staff. The average score of the results of the pretest was 70.7% with a range of 16% (minimum 64% and maximum 80%) and that of the posttest was 79.8% with a range of 12% (min 74% and max 88%). Conclusions: If HCWs are well trained to comply with IPC standards and transmission-based precautions, they have the ability to deliver safe health services and protect themselves, patients, environment and the community. Training of HCWs working at the mining, therefore, can be adapted in all mines to improve the quality of mining healthcare and respond to the need to improve the safety of mining communities.

OPTIMUM CONTROL ON MINING RATE OF MINERAL RESOURCES

Several model are built to search optimum mining rate by rising optimum control theory Sor various purpose, A numerical method is extracted to assist both planer and decision maker of mining in their planing or scheduling work.

Method for prevention and control of spontaneous combustion of coal seam and its application in mining field

Spontaneous combustion of coal seam has been and continues to be a big problem in coal mines. It could pose great threat to the safety of the whole mine and all miners, especially when it occurs in or nearby coal mines. Besides, environment of area surrounded mines during combustion can be threatened where large amount of toxic gases including CO_2, CO, SO_2 and H_2S can be leased by fire in mine. Hence, it is important and significant for scholars to study the controlling and preventing of the coal seam fire. In this paper, the complicated reasons for the occurrence and development of spontaneous combustion in coal seam are analysed and different models under various air leakage situations are built as well. Based on the model and approximately calculation, the difficulty of fire extinguishment in coal seam is pointed out as the difficulty and poor effect to remove the large amount of heat released. Detailed measurements about backfilling and case analyses are also provided on the basis of the recent ten years' practice of controlling spontaneous combustion in coal seams in China. A technical fire prevention and control method has been concluded as five steps including detection, prevention, sealing, injection and pressure adjustment. However, various backfill materials require different application and environmental factors, so in this paper, analyses and discussion about the effect and engineering application of prevention of spontaneous combustion are provided according to different backfilling technologies and methods. Once the aforementioned fire prevention can be widely applied and regulated in mines, green mining will be achievable concerning mine fire prevention and control.

Undersea safety mining of the large gold deposit in Xinli District of Sanshandao Gold Mine

The exploration of undersea resources becomes popular as land resources decrease. Researches were conducted with emphasis on the safety and efficiency of undersea mining of the large gold deposit in Xinli District of Sanshandao Gold Mine. A series of tests for the physical and mechanical characteristics of rock mass were carried out, and the three-dimensional geo-stress distribution was tested in the mining area. Further, a similar experimental simulation platform, which revealed the mechanism of water inrush and ascertained the reason- able thickness of the safety isolate layer, was established for the undersea mining. Meanwhile, the feasibility of cancelling the ore pillars and the safety conditions was checked by numerical simulation. The simulation results show that it is safe to exploit the ore body below the -85 m level （presently, the exploitation level is below -160 m in Xinli District）, and the ore pillars can be cancelled below the -560 m level. Fur- thermore, a novel backfill method was designed to reduce the rock strata disturbance and settlement, and the settlement of roof strata was monitored during the mining process. Engineering practice shows that the settlement of roof strata was small and that no disaster happened. This indicates that the undersea safety mining technology of the large gold deposit is achieved in Xinli District.

Production Characteristics and the Control Factors of Surface Wells for Relieved Methane Drainage in the Huainan Mining Area

Based on the production data of a large number of surface drainage wells in the Huainan mining area,the present study shows that four types of typical production characteristics for relieved methane wells are recognized,of which the stable type for production and gas concentration is the most dominate,as determined by a comprehensive study on the volume and concentration of drained gases, as well as the stress changes of rocks influenced by mining.Some influence factors for the productive differences of the drainage wells were also been discussed.The results indicate that protective coal-seam mining has a significant effect on overlying strata,which promotes the development of pores and fractures of coal reservoirs for methane desorption and migration;however,the production and the stability of drainage wells are affected by deformation and damage of the overlying strata.The second distribution of strata stress is caused by mining engineering,and if the stress load is larger than the carrying capacity of the extraction well,the gas production would be influenced by the drainage well that has been damaged by rock movement.Furthermore,the case damage occurs first in the weak, lithologic interface by its special mechanical properties.The stability of drainage wells and the production status are also influenced by the different drilling techniques,uneven distribution of gas concentration,and combination of gob gas and methane from the protected layer.

Roof filling control technology and application to mine roadway damage in small pit goaf

To recover coal resources that have been damaged by traditional mining methods and ensure stability of the lower roadway in a small pit goaf,the goaf area must be filled and reinforced.In this research,the 1202 working face of the Hanzui mine is considered as an example for classifying the roof of the mining tunnel under the small kiln destruction zone,the effect of the goaf on the roadway is determined based on the radio tunnel penetration method,a mechanical model to determine the roof filling control mechanism was established,and the duct foaming system and roof filling process were designed.The results show that the scope and degree of influence of the goaf on the mining lane are large,but safe tunneling can be ensured through the use of a steel shed and advanced grouting techniques.When the roof conditions are not similar,materials with different filling heights and filling strengths can be used to control the roof filling of the roadway.By combining field experience and laboratory tests,it was determined that a high-foaming material with a water-cement ratio of 1:0.6,a suitable high-foaming additive,and a water volume ratio of 1:30 is cost-efficient for filling and meets the filling strength requirements.Finally,the reliability of the proposed technology was verified by field experiments,which provide a reference for filling operations in similar mines.

Double-directional control bolt support technology and engineering application at large span Y-type intersections in deep coal mines

Under deep and complex geological conditions,severe deformation occurs at intersection points of Y-type roadways with large cross sections during engineering projects in coal mines,especially at junction arches.Based on in-situ investigations and theoretical studies,we have summarized typical forms of destruction and identified high stress and unrestricted support at both sides of junction arch as its main causes.In this study,we also presented double-directional control bolt support technology for a large Y-type span intersection,applied to deep intersection engineering in the Jiahe Coal Mine,which has proved effective.

Mining subsidence control by solid backfilling under buildings

Solid backfilling mining can reduce the buildings' damage caused by mining greatly. The reduction of subsidence value, the slow advancing speed and the subsidence caused by backfilling body compaction are the main reasons that solid backfilling mining velocity decreases significantly. Based on the research of mechanism, some principles on subsidence control of solid backfilling mining under buildings were proposed. The equivalent mining height was designed according to the fortification criteria of buildings and their attachment structures, which enables the ground movement and deformation caused by mining to be less than the corresponding fortification criteria.

DEVELOPMENT OF A DATA MINING METHOD FOR LAND CONTROL

Land resources are facing crises of being misused,especially for an intersection area between town and country,and land control has to be enforced.This paper presents a development of data mining method for land control.A vector_match method for the prerequisite of data mining i.e., data cleaning is proposed,which deals with both character and numeric data via vectorizing character_string and matching number.A minimal decision algorithm of rough set is used to discover the knowledge hidden in the data warehouse.In order to monitor land use dynamically and accurately,it is suggested to set up a real_time land control system based on GPS,digital photogrammetry and online data mining.Finally,the means is applied in the intersection area between town and country of Wuhan city,and a set of knowledge about land control is discovered.

Characteristics of rockburst and its mining technology in mines

In order to resolve how to mine under the condition of high stress with rockburst, this paper analyzes the law of rockburst, and considers that most of the rockbursts occur in the high stress area of stope. A method of rockburst forecast and its steps are given, and three different stages of rockburst are identified. Furthermore, this paper considers that blasting energy can effectively control rockburst by changing the characteristics of rock mass, which decreases the probability of rockburst happening. According to characteristics of rockburst, two feasible mining techniques under rockburst conditions are put forward, that is stoping and filling method, and sublevel caving method of mining without any sills in hanging wall.

Geotechnical characterization of red shale and its indication for ground control in deep underground mining

Geotechnical properties of red shale encountered in deep underground mining were characterized on both laboratory and field scale to reveal its unfavorably in geoenvironment.Its constituents,microstructure,strength properties and water-weakening properties were investigated.In situ stress environment and mining-induced fractured damage zone after excavation were studied to reveal the instability mechanism.The results show that red shale contains swelling and loose clayey minerals as interstitial filling material,producing low shear strength of microstructure and making it vulnerable to water.Macroscopically,a U-shaped curve of uniaxial compressive strength(UCS)exists with the increase of the angle between macro weakness plane and the horizon.However,its tensile strength reduced monotonically with this angle.While immersed in water for72h,its UCS reduced by91.9%comparing to the natural state.Field sonic tests reveal that an asymmetrical geometrical profile of fractured damage zone of gateroad was identified due to geological bedding plane and detailed gateroad layout with regards to the direction of major principle stress.Therefore,red shale is a kind of engineering soft rock.For ground control in underground mining or similar applications,water inflow within several hours of excavation must strictly be prevented and energy adsorbing rock bolt is recommended,especially in large deformation part of gateroad.

Control strategy for multi-pump emulsion power station in coal mine face

Shearer and hydraulic support are matching equipments. To increase the operating speed of the shearer, the following speed of hydraulic support must be increased. This means increasing the volume of flow from emulsion power station. Analyzing the operating characteristics of hydraulic supports, the number of simultaneously operating supports is obtained by means of pressure parameter and time history at a certain time, which is a theory base for development of control system to multi-pump emulsion power station.

Controlling mine pressure by subjecting high-level hard rock strata to ground fracturing

When mining extra-thick coal seams,the main cause of strong ground pressure are the high-level thick and hard strata,but as yet there is no active and effective control technology.This paper proposes the method of subjecting hard roofs to ground fracturing,and physical simulation is used to study the control effect of ground fracturing on the strata structure and energy release.The results show that ground fracturing changes the structural characteristics of the strata and reduces the energy release intensity and the spatial extent of overburden movement,thereby exerting significant control on the ground pressure.The Datong mining area in China is selected as the engineering background.An engineering test was conducted on site by ground horizontal well fracturing,and a 20-m-thick hard rock layer located 110 m vertically above the coal seam was targeted as the fracturing layer.On-site microseismic monitoring shows that the crack propagation length is up to 216 m and the height is up to 50 m.On-site mine pressure monitoring shows that(1)the roadway deformation is reduced to 100 mm,(2)the periodic weighting characteristics of the hydraulic supports are not obvious,and(3)the ground pressure in the working face is controlled significantly,thereby showing that the ground fracturing is successful.Ground fracturing changed the breaking characteristics of the high-level hard strata,thereby helping to ameliorate the stress concentration in the stope and providing an effective control approach for hard rock.

Study of “3-Step Mining” Subsidence Control in Coal Mining Under Buildings

Mining subsidence damage is the main factor of restricting coal mining under buildings. To control or ease effectively the degree of mining subsidence and deformation is essential to resolve this problem. Through analyzing both advantages and disadvantages of some technologies such as mining with stowing, partial extraction and grouting in separated beds of overburden, we used the principle of load replacement and propose a “3-step mining” method, a new pattern of controlling mining subsidence, which consists of： strip mining, i.e. grouting to fill and consolidate the caving zone and retained strip pillar mining. The mechanism of controlling mining subsidence by using the “3-step mining” pattern is analyzed. The effect of the control is numerically simulated. The preliminary analysis shows that the “3-step mining” can effectively control ground subsidence and deformation. By using this method, the ground subsidence factor can be controlled to a value of about 0.25. Coal recovery can reach 80%-90%. Coal mining without removing surface buildins can be realized and the economic loss resultin from round subsidence can be greatly reduced.

Integrated controlling technique of ecological environment in Shendong Mining Area

To enclose the interactive relation between the underground mining with suitable protection for surface ecological environments and surface prevention of ecological environments adapting to mining disturbing was researched and developed core of this technique. There are three aspects of controlling ecological environments, to dispose and renew before exploitation, to protect surface ecological environments in the exploitative process and to repair and build up after exploitation. Based on the moving law of overburden strata in shallow seam, the surface subsidence law and the growth law of vegetation in subsidence mine area, the integrated controlling technique has been developed synthetically by methods of theoretic analysis, laboratory simulation, numerical calculation, commercial test etc.. It includes the key techniques of aquifer-protective mining, filtering and purging of mine water through goaf, preventing and extinguishing fire in shallow seam no-rock roadway layout and waste disposal in underground, frame-building ecological functional sphere before exploitation, frame-building the ecological cycle using system after mining and so on.

Subsidence control method by inversely-inclined slicing and upward mining for ultra-thick steep seams

Ultra-thick steep coal seam mining will inevitably lead to the increase of greater and violent ground subsidence and deformation.A subsidence control method by inversely-inclined slicing and upward mining is proposed in this paper.By this method,the sequence of collapse of overlying strata and the direction of propagation of strata movement are changed,the extent of roof-side deformation thereby is lessened,and boundary angle of roof-side subsidence is reduced by 5°-10°.The mechanism of this mining method for control of strata movement has been evidenced by numerical simulation and experiments with similarity materials.A subsidence prediction model based on the variation of mining influence propagation angle can be used to evaluate the surface movement and deformation of the mining method.The application of the method in No.3 Mine in Yaojie mining area has yielded the expected result.

De-stressed mining of multi-seams:Surrounding rock control during the mining of a roadway in the overlying protected seam

Surrounding rock control in the overlying protective coal seam is a challenging topic for de-stressed mining of multi-seamed coal.Current research findings on roadway control were used in the design of a physical model of a complex textured roof having a varying thickness.The model was used to study roadway instability and collapse caused by dynamic pressure.The results show that when the thickness of the roof exceeds the bolted depth the roadway security is least and the roof has the greatest possibility for collapse.Numerical simulations were also carried out to study stress redistribution before and after roadway excavation during underlying protective seam mining.The evolution of roadway displacement and fracture,as affected by support methods,has been well studied.A series of support principles and technologies for mining affected roadways has been proposed after demonstration of successful practical application in the Huainan Mines.These principles and technologies are of extended value to deep coal mining support in China.

Prediction and control of rock burst of coal seam contacting gas in deep mining

By analyzing the characteristics and the production mechanism of rock burstthat goes with abnormal gas emission in deep coal seams,the essential method of eliminatingabnormal gas emission by eliminating the occurrence of rock burst or depressingthe magnitude of rock burst was considered.The No.237 working face was selected asthe typical working face contacting gas in deep mining;aimed at this working face,a systemof rock burst prediction and control for coal seam contacting gas in deep mining wasestablished.This system includes three parts:① regional prediction of rock burst hazardbefore mining,② local prediction of rock burst hazard during mining,and ③ rock burstcontrol.

Failure mechanism and control technology of longwall coalface in large-cutting-height mining method

The stability control of longwall coalface is the key technology of large-cutting-height mining method.Therefore,a systematic study of the factors that affect coalface stability and its control technology is required in the development of large-cutting-height mining method in China. After the practical field observation and years of study,it was found that the more than 95% of failures in coalface are shear failure. The shear failure analysis model of coalface has been established,that can perform systematic study among factors such as mining height,coal mass strength,roof load,support resistance,and face flipper protecting plate horizontal force. Meanwhile,sensitivity analysis of factors influencing coalface stability showed that improving support capacity,cohesion of coal mass and decreasing roof load of coalface are the key to improve coalface stability. Numerical simulation of the factors affecting coalface stability has been performed using UDEC software and the results are consistent with the theoretical analysis. The coalface reinforcement technology of large-cutting-height mining method using the grouting combined with coir rope is presented. Laboratory tests have been carried out to verify its reinforcement effect and practical application has been implemented in several coal mines with good results.It has now become the main technology to reduce longwall coalface failure of large-cutting-height mining method.