InSAR-derived surface deformation characteristics and mining subsidence parameters in mountain coal mines

Mining-induced surface deformation disrupts ecological balance and impedes economic progress.This study employs SBAS-InSAR with 107-view of ascending and descending SAR data from Sentinel-1,spanning February 2017 to September 2020,to monitor surface deformation in the Fa’er Coal Mine,Guizhou Province.Analysis on the surface deformation time series reveals the relationship between underground mining and surface shifts.Considering geological conditions,mining activities,duration,and ranges,the study determines surface movement parameters for the coal mine.It asserts that mining depth significantly influences surface movement parameters in mountainous mining areas.Increasing mining depth elevates the strike movement angle on the deeper side of the burial depth by 22.84°,while decreasing by 7.74°on the shallower side.Uphill movement angles decrease by 4.06°,while downhill movement angles increase by 15.71°.This emphasizes the technology's suitability for local mining design,which lays the groundwork for resource development,disaster prevention,and ecological protection in analogous contexts.

Method of Monitoring Three-dimensional Mining Surface Deformation Based on InSAR

In order to solve the problems of small monitoring range,long time and high cost of existing sedimentation observation methods,based on two-view sentinel No.1 radar images of Guqiao mining area in Huainan City from November 4,2017 to November 28,2017,surface change information was obtained in combination with D-InSAR,and the three-dimensional surface deformation was monitored by two-pass method and single line of sight D-InSAR method.The results show that during the research period of 24 d,the maximum deformation of the mining area reached 71 mm,and the southern subsidence was the most obvious,which was in line with the mining subsidence law.The maximum displacement from the north to the south was about 250 mm,while the maximum displacement from the east to the west was about 80 mm,and the maximum subsidence in the center was 110 mm.It is concluded that D-InSAR technique has a good effect on the inversion of the mining subsidence,and this method is suitable for three-dimensional surface monitoring in areas with similar geological conditions.The monitoring results have certain reference value.

Identified the hydrochemical and the sulfur cycle process in subsidence area of Pingyu mining area using multi-isotopes combined with hydrochemistry methods

Groundwater serves as an important water source for residents in and around mining areas.To achieve scientific planning and efficient utilization of water resources in mining areas,it is essential to figure out the chemical formation process and the ground water sulfur cycle that transpire after the coal mining activities.Based on studies of hydrochemistry and D,^(18)O-H_(2)O,^(34)S-SO_(4)isotopes,this study applied principal component analysis,ion ratio and other methods in its attempts to reveal the hydrogeochemical action and sulfur cycle in the subsidence area of Pingyu mining area.The study discovered that,in the studied area,precipitation provides the major supply of groundwater and the main water chemistry effects are dominated by oxidation dissolution of sulfide minerals as well as the dissolution of carbonate and silicate rocks.The sulfate in groundwater primarily originates from oxidation and dissolution of sulfide minerals in coal-bearing strata and human activities.The mixed sulfate formed by the oxidation of sulfide minerals and by human activities continuously recharges the groundwater,promoting the dissolution of carbonate rock and silicate rock in the process.

A model for extracting large deformation mining subsidence using D-InSAR technique and probability integral method

Due to the difficulties in obtaining large deformation mining subsidence using differential Interferometric Synthetic Aperture Radar （D-InSAR） alone, a new algorithm was proposed to extract large deformation mining subsidence using D-InSAR technique and probability integral method. The details of the algorithm are as follows：the control points set, containing correct phase unwrapping points on the subsidence basin edge generated by D-InSAR and several observation points （near the maximum subsidence and inflection points）, was established at first; genetic algorithm （GA） was then used to optimize the parameters of probability integral method; at last, the surface subsidence was deduced according to the optimum parameters. The results of the experiment in Huaibei mining area, China, show that the presented method can generate the correct mining subsidence basin with a few surface observations, and the relative error of maximum subsidence point is about 8.3%, which is much better than that of conventional D-InSAR （relative error is 68.0%）.

Subsidence prediction method based on equivalent mining height theory for solid backfilling mining

Based on the characteristics of strata movement of solid backfilling mining technology, the surface subsidence prediction method based on the equivalent mining height theory was proposed, and the parameters selection guideline of this method was also described. While comparing the parameters of caving mining with equivalent height, the subsidence efficient can be calculated according to the mining height and bulk factor of sagging zone and fracture zone, the tangent of main influence angle of solid backfilling mining is reduced by 0.2-0.5（while it cannot be less than 1.0）. For sake of safety, offset of the inflection point is set to zero, and other parameters, such as horizontal movement coefficient and main propagation angle are equal to the corresponding parameters of caving mining with equivalent height. In the last part, a case study of solid backfilling mining subsidence prediction was described. The results show the applicability of this method and the difference of the maximum subsidence point between the prediction and the observation is less than 5%.

Monitoring large-area mining subsidence by GNSS based on IGS stations

In order to monitor large-area mining subsidence accurately, a high-precision global navigation satellite system （GNSS） monitoring network was established based on the nearby international GNSS service （IGS） stations taken as reference points. Given the non-linear motions of IGS stations, the robust Kalman filtering （RKF） model was presented to determine the datum of multi-period monitoring network considering the velocity and weekly solution of IGS stations. The theory proposed was applied to monitoring mining subsidence in northern Anhui coal mine in China. According to the case study, the RKF model to establish monitoring datum is better than the prediction method and the weekly solution from IGS analysis centers （ACs）, and the corresponding precision of deformation can reach up to millimeter level with 4 h observation. The research provides an efficient and accurate approach for monitoring large-area mining subsidence.

Concurrent mining and reclamation for underground coal mining subsidence impacts in China

Large scale underground mining of coal resources in China using longwall mining has resulted in ecological and environment problems, including surface subsidence that is considered serious due to competing interests of prime agricultural lands, food security, and regional economic development. The subsided lands must be rehabilitated soon after mining to be agriculturally productive to minimize loss of farmland. Similarly, precious water resources must also be managed during and after mining to protect this natural resource. Toward these goals, the concept of ＂Concurrent mining and subsidence reclamation （CMR）＂ was proposed by Professor Hu of the China University of Mining and Technology, Beijing （CUMTB）. Over the last two decades CMR concepts have evolved and successfully applied in the field in different parts of China. This innovative technology has increased available farmland during the mining process, and provided better land protection and food security in mining areas even with high groundwater table. The technology has been used in 5 of the 14 large coal bases in China. This paper describes the technology concepts, design and guiding principles for planning with two case studies from different regions to enhance its application both in China and in other countries.

Comprehensive study on ecological restoration and land exploitation of mining subsidence in suburbs of Chinese mining cities

China has nearly a hundred mining cities derived from mining development.While mining development has brought about immense achievements in a city’s economic construction,it has also resulted in different levels of damage to the eco-environment of the mining city,leaving behind a lot of subsided wasteland and heavily confining the sustainable development and transformation there.How to restore and exploit the land and eco-environment disrupted by mining development in an effective way,therefore,has become a pressing challenge that Chinese mining cities are facing.In this paper,the planning and construction of Nanhu Eco-city in the suburb of Tangshan City is analyzed as an example.After characterizing the coal-mining subsided lands in Kailuan Tangshan Mine originated in different periods and under different geological mining conditions and evaluating their safety level,the authors try to demonstrate how eco-restoration and comprehensive land exploitation should be implemented by making the best use of available local resources to achieve "economy-society-environment" sustainability and coexistence in a mining city.

Changes of Precipitation Infiltration Recharge in the Circumstances of Coal Mining Subsidence in the Shen-Dong Coal Field,China

Coal mining subsidence is a universal environmental-geological problem in mining areas. By selecting the Shen-Dong coal mining subsidence area as the research field, this paper studies the changes in precipitation infiltration recharge in the circumstances of coal mining subsidence by means of field geological investigation and laboratory simulation experiments, which is expected to provide a scientific basis for eco-environmental restoration in the mining area. The results indicate that at the unstable stage of subsidence, three types of subsidence in the Shen-Dong mining area have positive effects on the precipitation infiltration recharge, and the type of full-thickness bedrock subsidence has the greatest influence. In the stable stage of subsidence, the precipitation infiltration process after long- term drought and the moisture migration in the aeration zone undergo three different stages： evaporation-infiltration before precipitation, infiltration-upward infiltration-infiltration during precipitation and evaporation-infiltration after precipitation. During a heavy rainfall infiltration process, the wetting front movement in fine sand, coarse sand and dualistic structure of fine-coarse sand consists of two stages： the stage of wetting front movement during precipitation, in which the wetting front movement distance has linear relationship with the depth, and the stage of wetting front movement after precipitation, in which the wetting front movement distance has the power function relationship with the depth. The wetting front movement velocity is influenced by the rainfall amount and the lithology in the aeration zone. However, as the depth increases, the movement velocity will decay exponentially.

Analysis of factors and countermeasures of mining subsidence in Kaiyang Phosphorus Mine

Ground crack and subsidence were investigated in Kaiyang Phosphorus Mine as an example. Contribution factors to cause ground crack and mining subsidence were studied, including mining method, mining depth and ore thickness and stope size, dip angle of orebody, geological structure, nature of overburden and water contents, and roof supports, etc. Countermeasures against cracks and subsidence were put forward. The uniaxial compressive strength of compounded phosphorus gypsum after 28 d of curing period was tested to be more than 1 MPa. Phosphorus gypsum can be used as materials for the backfill of stope. By comparison and numerical simulation, cut and fill mining method with middle-deep drilling holes and ore transportation by blasting force was selected as the optimum mining method in Kaiyang Phosphorus Mine.

SVM model for estimating the parameters of the probability-integral method of predicting mining subsidence

A new mathematical model to estimate the parameters of the probability-integral method for mining subsidence prediction is proposed.Based on least squares support vector machine(LS-SVM) theory, it is capable of improving the precision and reliability of mining subsidence prediction.Many of the geological and mining factors involved are related in a nonlinear way.The new model is based on statistical theory(SLT) and empirical risk minimization(ERM) principles.Typical data collected from observation stations were used for the learning and training samples.The calculated results from the LS-SVM model were compared with the prediction results of a back propagation neural network(BPNN) model.The results show that the parameters were more precisely predicted by the LS-SVM model than by the BPNN model.The LS-SVM model was faster in computation and had better generalized performance.It provides a highly effective method for calculating the predicting parameters of the probability-integral method.

Quantitative prediction of mining subsidence and its impact on the environment

This study is focused on the prediction of mining subsidence and its impact on the environment in the Hongqi mining area. The study was carried out by means of a probability integral model based, in first instance based on field surveys and the analysis of data collected from this area. Isolines of mining sub- sidence were then drawn and the impact caused by mining subsidence on the environment was analyzed quantitatively by spatial analysis with Geographic Information System （GIS）. The results indicate that the subsidence area of the first working-mine can be as large as 2.54 km2, the maximum subsidence is 3440 mrn which will cause 1524 houses to be relocated. The entire subsidence area of the mine can reach 8.09 km2, with a maximum subsidence of 3590 ram. Under these circumstances the value of the loss of ecosystem services Will reach 5.371 million Yuan and the cost of relocating buildings will increase to 6.858 million Yuan.

Quantitative evaluation of soil erosion of land subsided by coal mining using RUSLE

Based on a RUSLE model, we identified the key factors of the impact on soil erosion induced by coal min- ing subsidence. We designed a method for predicting/.S factors of a mining subsidence basin, using ana- lytical GIS spatial technology. Using the Huainan mining area as an example, we calculated the modulus of erosion, its volume and classified the grade of soil erosion for both the original area and the subsidence basin. The results show that the maximum modulus of erosion and the volume of erosion of the subsi- dence basin without water logging would increase by 78% and 23% respectively compared with the ori- ginal situation. The edge of the subsidence basin, where the land subsidence was uneven, is subject to the greatest acceleration in soil erosion. In the situation of water logging after subsidence, the maximum modulus of erosion would decrease if the accumulated slope length were reduced. This maximum mod- ulus around the water logged area within the subsidence basin is equal to that without water logging, while the total volume of erosion decreases. Therefore, mining subsidence aggravates soil erosion espe- cially at the edge of basins where water and soil conservation measures should be taken.

Role of the different planting age of seabuckthorn forests to soil amelioration in coal mining subsidence land

To investigate the effects of seabuckthorn(Hippophae rhamnoides)on soil amelioration,using the space replacement method,soil physical and chemical indexes as well as the microorganism quantity and soil enzyme activities were analyzed.The results showed that:the soil bulk density of surface soil decreased and soil porosity and field capacity increased after afforestation with seabuckthorn.The plant was found to effectively reduce the soil pH,increase the soil conductivity,soil organic matters and available nutrients.Soil microorganism quantity,soil enzyme activities were both higher in 0-20 cm layer than in 20-40 cm layer.With the increase years of remediation with seabuckthorn,the quantity of soil microorganism and enzyme activities were increasing to a higher level 5 to 8 years later.Our study indicates that seabuckthorn can effectively improve soil physical and chemical properties,increase the quantity of soil microorganisms and enzyme activities,which is of great significance for the ecosystem restoration in mining areas.

Time series ground subsidence inversion in mining area based on CRInSAR and PSInSAR integration

The subsidence of the mining area was monitored by analyzing the phase of permanent scatters （PS） which maintained high coherence in magnitude of SAR images.A hew method of spatial unwrapping was presented which used the subsidence rates calculated on comer reflector （CR） points as constraints for PS network to perform the spatial unwrapping using the parametric adjustment method.The algorithm achieved the integration of CR data and PSInSAR algorithm.The colliery dense distributed area around Baisha reservoir was chosen as the study area in the experiment.The time series of subsidence from February in 2007 to February in 2010 is successfully inversed by using the periodic function to simulate the linear and nonlinear components of the deformation.The simulation results show that the accuracy can be ± 2.1 mm with the leveling data being used as the external validation data.

Investigation and characterization of mining subsidence in Kaiyang Phosphorus Mine

In Kaiyang Phosphorus Mine, serious environmental and safety problems are caused by large scale mining activities in the past 40 years. These problems include mining subsidence, low recovery ratio, too much dead ore in pillars, and pollution of phosphorus gypsum. Mining subsidence falls into four categories: curved ground and mesa, ground cracks and collapse hole, spalling and eboulement, slope slide and creeping. Measures to treat the mining subsidence were put forward: finding out and managing abandoned stopes, optimizing mining method (cut and fill mining method), selecting proper backfilling materials (phosphogypsum mixtures), avoiding disorder mining operation, and treating highway slopes. These investigations and engineering treatment methods are believed to be able to contribute to the safety extraction of ore and sustainable development in Kaiyang Phosphorus Mine.

Limits to foundation displacement of an extra high voltage transmission tower in a mining subsidence area

Given the background of a transmission tower erected on a particular mining subsidence area,we used finite element modeling to analyze the anti-deformation performance of transmission towers under a number of different load conditions,including horizontal foundation displacement,uneven vertical downward displacement,wind loads and icing conditions.The results show that the failure in stability of a single steel angle iron represents the limit of the tower given ground deformation.We calculated the corresponding limits of foundation displacements.The results indicate that compression displacement of the foundation is more dangerous than tension displacement.Under complex foundation displacement conditions,horizontal foundation displacement is a key factor leading to failure in the stability of towers.Under conditions of compression or tension displacement of the foundation,wind load becomes the key factor.Towers do not fail when foundation displacements are smaller than 1% (under tension) or 0.5% (under horizontal compression or single foundation subsidence) of the distance between two supports.

Extracting mining subsidence land from remote sensing images based on domain knowledge

Extracting mining subsidence land from RS images is one of important research contents for environment monitoring in mining area. The accuracy of traditional extracting models based on spectral features is low. In order to extract subsidence land from RS images with high accuracy, some domain knowledge should be imported and new models should be proposed. This paper, in terms of the disadvantage of traditional extracting models, imports domain knowledge from practice and experience, converts semantic knowledge into digital information, and proposes a new model for the specific task. By selecting Luan mining area as study area, this new model is tested based on GIS and related knowledge. The result shows that the proposed method is more pre- cise than traditional methods and can satisfy the demands of land subsidence monitoring in mining area.

Water quality variation of mining-subsidence lake during the initial stage： cases study of Zhangji and Guqiao Mines

Four quarters＇ water collecting and monitoring samples were done in the mining subsidence lakes of different water storing periods （ 2 to 7 years）, considering the water storing time and pollution sources state of the subsidence lakes. The following indexes were discussed such as organic indexes （TOC, CODM,, BOD, COD）, nutrient salts （TN, NH4^＋, NO3, NO,, Kjeldahl Nitrogen, TP, PO4^3- ）, etc. It is shown that water quality of the mining subsidence lake during the initial stage （ 2 years to 7 years） can stay relatively stable with a fluctuation during different quarters in a year, which can reach class Ill or IV of the Surthcc Water Environmental Quality Standard.

EXPERIMENTAL RESEARCH ON EFFECTS OF INITIAL JOINTS ON SURFACE DISPLACEMENT DUE TO COAL MINING

Surface displacement caused by underground coal mining is influenced by many factors such as the depth and thickness of the coal seam and joints in overburben rocks. Extensive efforts have been devoted to the ground surface displacement. Nevertheless, the joints have not been taken into consideration for a long time. In fact, there exist numerous joints and cracks in rocks.As a result, the joints in overburden rocks have to be taken into account. The joints in rocks can be treated as initial damage theoretically. In this paper, two kinds of physical model, one containing no initial joints and anotber containing some initial joints, are employed to systematically investigate effecs of initial joints on surface subsidence. Moreover, within the framework of damage mechanics, the statistical relationships between the characteristic value for surface displacement and damage variable are obtained.