The miscibility of flue gas and different types of light oils is investigated through slender-tube miscible displacement experiment at high temperature and high pressure.Under the conditions of high temperature and hi...The miscibility of flue gas and different types of light oils is investigated through slender-tube miscible displacement experiment at high temperature and high pressure.Under the conditions of high temperature and high pressure,the miscible displacement of flue gas and light oil is possible.At the same temperature,there is a linear relationship between oil displacement efficiency and pressure.At the same pressure,the oil displacement efficiency increases gently and then rapidly to more than 90% to achieve miscible displacement with the increase of temperature.The rapid increase of oil displacement efficiency is closely related to the process that the light components of oil transit in phase state due to distillation with the rise of temperature.Moreover,at the same pressure,the lighter the oil,the lower the minimum miscibility temperature between flue gas and oil,which allows easier miscibility and ultimately better performance of thermal miscible flooding by air injection.The miscibility between flue gas and light oil at high temperature and high pressure is more typically characterized by phase transition at high temperature in supercritical state,and it is different from the contact extraction miscibility of CO_(2) under conventional high pressure conditions.展开更多
Trap-assisted charge recombination is one of the primary limitationsof restricting the performance of organic solar cells. However, effectivelyreducing the presence of traps in the photoactive layer remains challengin...Trap-assisted charge recombination is one of the primary limitationsof restricting the performance of organic solar cells. However, effectivelyreducing the presence of traps in the photoactive layer remains challenging.Herein, wide bandgap polymer donor PTzBI-dF is demonstrated as an effectivemodulator for enhancing the crystallinity of the bulk heterojunction active layerscomposed of D18 derivatives blended with Y6, leading to dense and orderedmolecular packings, and thus, improves photoluminescence quenching properties.As a result, the photovoltaic devices exhibit reduced trap-assisted charge recombinationlosses, achieving an optimized power conversion efficiency of over 19%.Besides the efficiency enhancement, the devices comprised of PTzBI-dF as athird component simultaneously attain decreased current leakage, improved chargecarrier mobilities, and suppressed bimolecular charge recombination, leading toreduced energy losses. The advanced crystalline structures induced by PTzBI-dFand its characteristics, such as well-aligned energy level, and complementaryabsorption spectra, are ascribed to the promising performance improvements.Our findings suggest that donor phase engineering is a feasible approach to tuning the molecular packings in the active layer, providingguidelines for designing effective morphology modulators for high-performance organic solar cells.展开更多
In this work,we provide a comprehensive review on the formation,evolution,properties,and effects of supercritical geofluid.In Earth's interior,enhanced miscibility between H_(2)O and silicate by the addition of sp...In this work,we provide a comprehensive review on the formation,evolution,properties,and effects of supercritical geofluid.In Earth's interior,enhanced miscibility between H_(2)O and silicate by the addition of special components or by the increase of pressure and temperature gives rise to supercritical geofluid with a significant amount of both H_(2)O and silicate solute.The formation of supercritical geofluid in magmatic-hydrothermal systems,typified by pegmatite system,is governed by meltfluid critical curve.The formation of supercritical geofluid in metamorphic systems,typified by subducted slab,is governed by the second critical end point.Experimental results suggest that the presence of boron and fluorine in pegmatite system makes it possible to form supercritical geofluid at crustal depths,but the release of supercritical geofluid from subducted slab is withheld until almost 100 km depth.A major presence of both H_(2)O and depolymerized structural units(monomers,dimers,etc.)endows supercritical geofluid with unique physical properties including low density,low elastic moduli,low viscosity,high diffusivity,and high electrical conductivity.Supercritical geofluid can effectively mobilize a variety of elements even including high field strength elements and heavy rare earth elements.The chemical signatures of supercritical geofluid can be inherited by metasomatized mantle and mantle-derived melts,and this could give an explanation of the oxidation of arc magmas.Phase separation of supercritical geofluid through the mechanism of spinodal decomposition leads to formation of a melt network.Multiphase fluid inclusions recovered from subduction zone rocks and pegmatites are possible relics of supercritical geofluid.Supercritical geofluid can cause electrical anomaly and low seismic velocity near the top of subducted slab,and can be linked with intermediate-focus earthquakes.Supercritical geofluid may have played a crucial role in the formation of pegmatites and associated ore deposits.展开更多
The miscibility and crystallization of solution casting biodegradable poly（3-hydroxybuty- rate）/poly（ethylene succinate） （PHB/PES） blends was investigated by differential scanning calorimetry, rheology, and opti...The miscibility and crystallization of solution casting biodegradable poly（3-hydroxybuty- rate）/poly（ethylene succinate） （PHB/PES） blends was investigated by differential scanning calorimetry, rheology, and optical microscopy. The blends showed two glass transition temperatures and a depression of melting temperature of PHB with compositions in phase diagram, which indicated that the blend was partially miscible. The morphology observation supported this result. It was found that the PHB and PES can crystallize simultaneously or upon stepwise depending on the crystallization temperatures and compositions. The spherulite growth rate of PHB increased with increasing of PES content. The influence of compositions on the spherulitic growth rate for the partially miscible polymer blends was discussed.展开更多
In this paper, melt blends of poly（propylene carbonate） （PPC） with poly（butylene succinate） （PBS） were characterized by dynamic mechanical analysis （DMA）, differential scanning calorimetry （DSC）, tensile t...In this paper, melt blends of poly（propylene carbonate） （PPC） with poly（butylene succinate） （PBS） were characterized by dynamic mechanical analysis （DMA）, differential scanning calorimetry （DSC）, tensile testing, wide-angle X-ray diffraction （WAXD）, polarized optical microscopy and thermogravimetric analysis （TGA）. The results indicated that the glass transition temperature of PPC in the 90/10 PPC/PBS blend was decreased by about 11 K comparing with that of pure PPC. The presence of 10% PBS was partially miscible with PPC. The 90/10 PPC/PBS blend had better impact and tensile strength than those of the other PPC/PBS blends. The glass transition temperature of PPC in the 80/20, 70/30, and 60/40 PPC/PBS blends was improved by about 4.9 K, 4.2 K, and 13 K comparing with that of pure PPC, respectively; which indicated the immiscibility between PPC and PBS. The DSC results indicated that the crystallization of PBS became more difficult when the PPC content increased. The matrix of PPC hindered the crystallization process of PBS. While the content of PBS was above 20%, significant crystallization-induced phase separation was observed by polarized optical microscopy. It was found from the WAXD analysis that the crystal structure of PBS did not change, and the degree of crystallinity increased with increasing PBS content in the PPC/PBS blends.展开更多
Liquid crystalline polymer-polyamide 66 (LCP/PA66) blends were compounded by using a Brabender mixing followed by compression moulding. The LCP employed was a semi-flexible liquid crystalline copolyesteramide based o...Liquid crystalline polymer-polyamide 66 (LCP/PA66) blends were compounded by using a Brabender mixing followed by compression moulding. The LCP employed was a semi-flexible liquid crystalline copolyesteramide based on 30% (molar fraction ) of p-amino benzoic acid (ABA ) and 70% (molar fraction) of poly (ethylene terephthalate) (PET). The LCP/PA66 blends were investigated in terms of the thermal and dynamic mechanical properties. It was found that PA66 and LCP components of the blends are miscible in the molten state, but are partially miscible in the solid state. The inclusion of the semi-flexible LCP into PA66 retards the crystallization rate of PA66. Furthermore, the melting temperature and the degree of crystallinity of PA66 are reduced considerably due to the LCP addition.展开更多
An effective parameter in the miscible-CO_2 enhanced oil recovery procedure is the minimum miscibility pressure(MMP)defined as the lowest pressure that the oil in place and the injected gas into reservoir achieve misc...An effective parameter in the miscible-CO_2 enhanced oil recovery procedure is the minimum miscibility pressure(MMP)defined as the lowest pressure that the oil in place and the injected gas into reservoir achieve miscibility at a given temperature. Flue gases released from power plants can provide an available source of CO_2,which would otherwise be emitted to the atmosphere, for injection into a reservoir. However, the costs related to gas extraction from flue gases is potentially high. Hence, greater understanding the role of impurities in miscibility characteristics between CO_2 and reservoir fluids helps to establish which impurities are tolerable and which are not. In this study, we simulate the effects of the impurities nitrogen(N_2), methane(C_1), ethane(C_2) and propane(C_3) on CO_2 MMP. The simulation results reveal that,as an impurity, nitrogen increases CO_2–oil MMP more so than methane. On the other hand, increasing the propane(C_3)content can lead to a significant decrease in CO_2 MMP, whereas varying the concentrations of ethane(C_2) does not have a significant effect on the minimum miscibility pressure of reservoir crude oil and CO_2 gas. The novel relationships established are particularly valuable in circumstances where MMP experimental data are not available.展开更多
A model has been developed to describe the microstructure evolution in the atomized droplets of Cu-Fe alloy during cooling through the metastable miscibility gap. Calculations have been performed for Cu85Fe15 alloy to...A model has been developed to describe the microstructure evolution in the atomized droplets of Cu-Fe alloy during cooling through the metastable miscibility gap. Calculations have been performed for Cu85Fe15 alloy to investigate the process of liquid-liquid phase transformation. The numerical results indicate that the minority phase droplets are nucleated in a temperature region around the peak of the supersaturation. The average radius of the Fe-rlch droplets decreases and the number density of the minority phase droplets increases with decreasing the atomized droplet size. The simulated results were compared with the experimental ones. The kinetic process of the liquid-liquid phase transformation was discussed in detail.展开更多
Positron annihilation spectroscopy (PAS) was utilized to investigate the relationship between the free-volume hole properties and miscibility of dynamically vulcanized EPDM/PP blend. The results showed that the noncry...Positron annihilation spectroscopy (PAS) was utilized to investigate the relationship between the free-volume hole properties and miscibility of dynamically vulcanized EPDM/PP blend. The results showed that the noncrystalline region of PP and EPDM in the blend was partially miscible and the miscibility of the blend became worse when the weight percent of EPDM was <50%. This was also demonstrated by DMTA and mechanical properties of the blends with various compositions.展开更多
Poly(hydroxybutyrate)/poly(vinyl alcohol)(PHB/PVA)blends plasticized with glycerol were prepared by melt blending of PHB and glycerol plasticized PVA.The PHB/PVA-glycerol compositions were 90:10,75:25 and 50:50 w/w,be...Poly(hydroxybutyrate)/poly(vinyl alcohol)(PHB/PVA)blends plasticized with glycerol were prepared by melt blending of PHB and glycerol plasticized PVA.The PHB/PVA-glycerol compositions were 90:10,75:25 and 50:50 w/w,being the concentration of glycerol in the PVA mixture of 10 wt%.The blends were characterized by infrared spectroscopy,dynamic-mechanical thermal analysis,and scanning electron microscope of the fragile fractured surface.The results showed one single phase blend,indicating miscibility corroborated by the presence of a single glass transition temperature.The blending method proved to be an efficient way to tune PHB properties keeping its biodegradable nature since both PVA and glycerol are fully biodegradable materials.展开更多
In this paper the miscibility of poly (ε-caprolactone) (PCL) and aliphatic polycarbonate (APC) is studied by using DSC. The results show that PCL and APC are miscible in all ranges of composition. The interaction par...In this paper the miscibility of poly (ε-caprolactone) (PCL) and aliphatic polycarbonate (APC) is studied by using DSC. The results show that PCL and APC are miscible in all ranges of composition. The interaction parameter between the polymers is calculated from the melting point depression data. Using optical microscope, the shapes of the PCL spherulites in the blends are observed.展开更多
The miscibility and phase behavior of the blends of polyoxymethylene (POM)/Novolak were investigated by the cloud point method, which showed that the POM/Novolak blends exhibited a lower critical solution temperature....The miscibility and phase behavior of the blends of polyoxymethylene (POM)/Novolak were investigated by the cloud point method, which showed that the POM/Novolak blends exhibited a lower critical solution temperature. The melting point of POM decreased when diluted with Novolak. From the melting temperature depression of POM, a negative interaction parameter (x) between POM and Novolak was obtained. The IR spectrum revealed that the miscibility between POM and Novolak was caused by the specific interaction between the OH groups of Novolak and the ether oxygen atoms of POM. The morphology of the blends investigated by polarized light microscopy showed that the size of spherulites of POM was sharply decreased by its mixing with Novolak. This suggests that Novolak be used as a compatibilizer for POM.展开更多
Two kinds of experimental methods were tried in the present work:(i)the powder metallurgy method combined with differential thermal analysis(DTA)to determine the metastable liquidus miscibility gap for a Fe–Cu binary...Two kinds of experimental methods were tried in the present work:(i)the powder metallurgy method combined with differential thermal analysis(DTA)to determine the metastable liquidus miscibility gap for a Fe–Cu binary system and(ii)the high-temperature melting method combined with isothermal treatment to determine the stable liquidus miscibility gap for a Fe–Sn binary system.The experimental method was adopted according to the characteristics of the liquidus miscibility gap of the specific system.Using the powder metallurgy method,a uniform microstructure morphology and chemical composition was obtained in the DTA specimen,and the phase-separation temperature of the supercooled metastable liquid was measured.The isothermal treatment was applied for the samples inside the stable liquidus miscibility gap;here,equilibrated compositions were reached,and a layered morphology was formed after rapid cooling.The liquid miscibility gaps of the Fe–Cu and Fe–Sn binary systems were measured,and the peak temperatures of the corresponding miscibility gaps were determined to be about 1417°C at x(Cu)=0.465 at%and 1350°C at x(Sn)=0.487 at%,respectively.On the basis of the experimental results,both the Fe–Cu and the Fe–Sn binary systems were thermodynamically assessed.展开更多
Miscibility and crystallization have been studied for polypropylene-polyethylene and polyethylene-polyethyleneblends. In the case of the polypropylene blends the composition of interest is 20% polypropylene. At this c...Miscibility and crystallization have been studied for polypropylene-polyethylene and polyethylene-polyethyleneblends. In the case of the polypropylene blends the composition of interest is 20% polypropylene. At this composition thepolypropylene has been found to be soluble in linear low density polyethylene but insoluble in high, low and very lowdensity polyethylenes. The miscibility has been concluded from the crystallization kinetics and polarised optical microscopywith a hot stage. Polyethylene-polyethylene blends have been formed from polymers with similar average branching contentbut where they have different melting temperatures. Important consequences are to introduce long branches into apolyethylene that only has short branches, and to modify the morphology of a polyethylenes so that haze, gloss and strainhardening are improved. Polyethylene blends must be developed after careful consideration of the branch content anddistribution within each of the constituents. It is not sufficient to simply blend polyethylenes, with the desired range ofproperties, without regard to the miscibility of the blend composition.展开更多
基金Supported by the PetroChina Science and Technology Project(2023ZG18).
文摘The miscibility of flue gas and different types of light oils is investigated through slender-tube miscible displacement experiment at high temperature and high pressure.Under the conditions of high temperature and high pressure,the miscible displacement of flue gas and light oil is possible.At the same temperature,there is a linear relationship between oil displacement efficiency and pressure.At the same pressure,the oil displacement efficiency increases gently and then rapidly to more than 90% to achieve miscible displacement with the increase of temperature.The rapid increase of oil displacement efficiency is closely related to the process that the light components of oil transit in phase state due to distillation with the rise of temperature.Moreover,at the same pressure,the lighter the oil,the lower the minimum miscibility temperature between flue gas and oil,which allows easier miscibility and ultimately better performance of thermal miscible flooding by air injection.The miscibility between flue gas and light oil at high temperature and high pressure is more typically characterized by phase transition at high temperature in supercritical state,and it is different from the contact extraction miscibility of CO_(2) under conventional high pressure conditions.
基金support from the National Natural Science Foundation of China(62275057)the Guangxi Natural Science Foundation(2023GXNSFFA026004 and 2022GXNSFDA035066)+2 种基金the Innovation Project of Guangxi Graduate Education(YCBZ2024034)Natural Science Foundation of Ningbo under grant(2022J149)Natural Science Foundation of Ningbo under grant(2022A-230-G)
文摘Trap-assisted charge recombination is one of the primary limitationsof restricting the performance of organic solar cells. However, effectivelyreducing the presence of traps in the photoactive layer remains challenging.Herein, wide bandgap polymer donor PTzBI-dF is demonstrated as an effectivemodulator for enhancing the crystallinity of the bulk heterojunction active layerscomposed of D18 derivatives blended with Y6, leading to dense and orderedmolecular packings, and thus, improves photoluminescence quenching properties.As a result, the photovoltaic devices exhibit reduced trap-assisted charge recombinationlosses, achieving an optimized power conversion efficiency of over 19%.Besides the efficiency enhancement, the devices comprised of PTzBI-dF as athird component simultaneously attain decreased current leakage, improved chargecarrier mobilities, and suppressed bimolecular charge recombination, leading toreduced energy losses. The advanced crystalline structures induced by PTzBI-dFand its characteristics, such as well-aligned energy level, and complementaryabsorption spectra, are ascribed to the promising performance improvements.Our findings suggest that donor phase engineering is a feasible approach to tuning the molecular packings in the active layer, providingguidelines for designing effective morphology modulators for high-performance organic solar cells.
基金supported by the National Key R&D Program of China(Grant No.2018YFA0702700)the National Natural Science Foundation of China(Grant Nos.42330301,42488101)the Fundamental Research Funds for the Central Universities of China(Grant No.WK3410000019)。
文摘In this work,we provide a comprehensive review on the formation,evolution,properties,and effects of supercritical geofluid.In Earth's interior,enhanced miscibility between H_(2)O and silicate by the addition of special components or by the increase of pressure and temperature gives rise to supercritical geofluid with a significant amount of both H_(2)O and silicate solute.The formation of supercritical geofluid in magmatic-hydrothermal systems,typified by pegmatite system,is governed by meltfluid critical curve.The formation of supercritical geofluid in metamorphic systems,typified by subducted slab,is governed by the second critical end point.Experimental results suggest that the presence of boron and fluorine in pegmatite system makes it possible to form supercritical geofluid at crustal depths,but the release of supercritical geofluid from subducted slab is withheld until almost 100 km depth.A major presence of both H_(2)O and depolymerized structural units(monomers,dimers,etc.)endows supercritical geofluid with unique physical properties including low density,low elastic moduli,low viscosity,high diffusivity,and high electrical conductivity.Supercritical geofluid can effectively mobilize a variety of elements even including high field strength elements and heavy rare earth elements.The chemical signatures of supercritical geofluid can be inherited by metasomatized mantle and mantle-derived melts,and this could give an explanation of the oxidation of arc magmas.Phase separation of supercritical geofluid through the mechanism of spinodal decomposition leads to formation of a melt network.Multiphase fluid inclusions recovered from subduction zone rocks and pegmatites are possible relics of supercritical geofluid.Supercritical geofluid can cause electrical anomaly and low seismic velocity near the top of subducted slab,and can be linked with intermediate-focus earthquakes.Supercritical geofluid may have played a crucial role in the formation of pegmatites and associated ore deposits.
基金ACKNOWLEDGMENT This work was supported by the Key Science Foundation of Education Ministry of China and the Anhui Science Foundation.
文摘The miscibility and crystallization of solution casting biodegradable poly（3-hydroxybuty- rate）/poly（ethylene succinate） （PHB/PES） blends was investigated by differential scanning calorimetry, rheology, and optical microscopy. The blends showed two glass transition temperatures and a depression of melting temperature of PHB with compositions in phase diagram, which indicated that the blend was partially miscible. The morphology observation supported this result. It was found that the PHB and PES can crystallize simultaneously or upon stepwise depending on the crystallization temperatures and compositions. The spherulite growth rate of PHB increased with increasing of PES content. The influence of compositions on the spherulitic growth rate for the partially miscible polymer blends was discussed.
基金This work was supported by the National Natural Science Foundation of China(Nos.270274049 and 220374051).
文摘In this paper, melt blends of poly（propylene carbonate） （PPC） with poly（butylene succinate） （PBS） were characterized by dynamic mechanical analysis （DMA）, differential scanning calorimetry （DSC）, tensile testing, wide-angle X-ray diffraction （WAXD）, polarized optical microscopy and thermogravimetric analysis （TGA）. The results indicated that the glass transition temperature of PPC in the 90/10 PPC/PBS blend was decreased by about 11 K comparing with that of pure PPC. The presence of 10% PBS was partially miscible with PPC. The 90/10 PPC/PBS blend had better impact and tensile strength than those of the other PPC/PBS blends. The glass transition temperature of PPC in the 80/20, 70/30, and 60/40 PPC/PBS blends was improved by about 4.9 K, 4.2 K, and 13 K comparing with that of pure PPC, respectively; which indicated the immiscibility between PPC and PBS. The DSC results indicated that the crystallization of PBS became more difficult when the PPC content increased. The matrix of PPC hindered the crystallization process of PBS. While the content of PBS was above 20%, significant crystallization-induced phase separation was observed by polarized optical microscopy. It was found from the WAXD analysis that the crystal structure of PBS did not change, and the degree of crystallinity increased with increasing PBS content in the PPC/PBS blends.
基金Supported by the National Natural Science Foundation of China.
文摘Liquid crystalline polymer-polyamide 66 (LCP/PA66) blends were compounded by using a Brabender mixing followed by compression moulding. The LCP employed was a semi-flexible liquid crystalline copolyesteramide based on 30% (molar fraction ) of p-amino benzoic acid (ABA ) and 70% (molar fraction) of poly (ethylene terephthalate) (PET). The LCP/PA66 blends were investigated in terms of the thermal and dynamic mechanical properties. It was found that PA66 and LCP components of the blends are miscible in the molten state, but are partially miscible in the solid state. The inclusion of the semi-flexible LCP into PA66 retards the crystallization rate of PA66. Furthermore, the melting temperature and the degree of crystallinity of PA66 are reduced considerably due to the LCP addition.
文摘An effective parameter in the miscible-CO_2 enhanced oil recovery procedure is the minimum miscibility pressure(MMP)defined as the lowest pressure that the oil in place and the injected gas into reservoir achieve miscibility at a given temperature. Flue gases released from power plants can provide an available source of CO_2,which would otherwise be emitted to the atmosphere, for injection into a reservoir. However, the costs related to gas extraction from flue gases is potentially high. Hence, greater understanding the role of impurities in miscibility characteristics between CO_2 and reservoir fluids helps to establish which impurities are tolerable and which are not. In this study, we simulate the effects of the impurities nitrogen(N_2), methane(C_1), ethane(C_2) and propane(C_3) on CO_2 MMP. The simulation results reveal that,as an impurity, nitrogen increases CO_2–oil MMP more so than methane. On the other hand, increasing the propane(C_3)content can lead to a significant decrease in CO_2 MMP, whereas varying the concentrations of ethane(C_2) does not have a significant effect on the minimum miscibility pressure of reservoir crude oil and CO_2 gas. The novel relationships established are particularly valuable in circumstances where MMP experimental data are not available.
基金the finan cial supports from the National Natural Science Foundation of China(Grant Nos.50271076,50371092 , 50395104)the Sino-Germany Science Foundation(GZ032/1) the Natural Science Foundation of Liaoning Province of China.
文摘A model has been developed to describe the microstructure evolution in the atomized droplets of Cu-Fe alloy during cooling through the metastable miscibility gap. Calculations have been performed for Cu85Fe15 alloy to investigate the process of liquid-liquid phase transformation. The numerical results indicate that the minority phase droplets are nucleated in a temperature region around the peak of the supersaturation. The average radius of the Fe-rlch droplets decreases and the number density of the minority phase droplets increases with decreasing the atomized droplet size. The simulated results were compared with the experimental ones. The kinetic process of the liquid-liquid phase transformation was discussed in detail.
基金This work was financially supported by 863 Programme of China No.863-715-012-0160
文摘Positron annihilation spectroscopy (PAS) was utilized to investigate the relationship between the free-volume hole properties and miscibility of dynamically vulcanized EPDM/PP blend. The results showed that the noncrystalline region of PP and EPDM in the blend was partially miscible and the miscibility of the blend became worse when the weight percent of EPDM was <50%. This was also demonstrated by DMTA and mechanical properties of the blends with various compositions.
文摘Poly(hydroxybutyrate)/poly(vinyl alcohol)(PHB/PVA)blends plasticized with glycerol were prepared by melt blending of PHB and glycerol plasticized PVA.The PHB/PVA-glycerol compositions were 90:10,75:25 and 50:50 w/w,being the concentration of glycerol in the PVA mixture of 10 wt%.The blends were characterized by infrared spectroscopy,dynamic-mechanical thermal analysis,and scanning electron microscope of the fragile fractured surface.The results showed one single phase blend,indicating miscibility corroborated by the presence of a single glass transition temperature.The blending method proved to be an efficient way to tune PHB properties keeping its biodegradable nature since both PVA and glycerol are fully biodegradable materials.
基金The subject supported by National Natural Science Foundation of China
文摘In this paper the miscibility of poly (ε-caprolactone) (PCL) and aliphatic polycarbonate (APC) is studied by using DSC. The results show that PCL and APC are miscible in all ranges of composition. The interaction parameter between the polymers is calculated from the melting point depression data. Using optical microscope, the shapes of the PCL spherulites in the blends are observed.
文摘The miscibility and phase behavior of the blends of polyoxymethylene (POM)/Novolak were investigated by the cloud point method, which showed that the POM/Novolak blends exhibited a lower critical solution temperature. The melting point of POM decreased when diluted with Novolak. From the melting temperature depression of POM, a negative interaction parameter (x) between POM and Novolak was obtained. The IR spectrum revealed that the miscibility between POM and Novolak was caused by the specific interaction between the OH groups of Novolak and the ether oxygen atoms of POM. The morphology of the blends investigated by polarized light microscopy showed that the size of spherulites of POM was sharply decreased by its mixing with Novolak. This suggests that Novolak be used as a compatibilizer for POM.
基金supported by National Key Research and Development Program of China (No. 2016YFB0701201)National Natural Science Foundation of China (No. 51271027)
文摘Two kinds of experimental methods were tried in the present work:(i)the powder metallurgy method combined with differential thermal analysis(DTA)to determine the metastable liquidus miscibility gap for a Fe–Cu binary system and(ii)the high-temperature melting method combined with isothermal treatment to determine the stable liquidus miscibility gap for a Fe–Sn binary system.The experimental method was adopted according to the characteristics of the liquidus miscibility gap of the specific system.Using the powder metallurgy method,a uniform microstructure morphology and chemical composition was obtained in the DTA specimen,and the phase-separation temperature of the supercooled metastable liquid was measured.The isothermal treatment was applied for the samples inside the stable liquidus miscibility gap;here,equilibrated compositions were reached,and a layered morphology was formed after rapid cooling.The liquid miscibility gaps of the Fe–Cu and Fe–Sn binary systems were measured,and the peak temperatures of the corresponding miscibility gaps were determined to be about 1417°C at x(Cu)=0.465 at%and 1350°C at x(Sn)=0.487 at%,respectively.On the basis of the experimental results,both the Fe–Cu and the Fe–Sn binary systems were thermodynamically assessed.
文摘Miscibility and crystallization have been studied for polypropylene-polyethylene and polyethylene-polyethyleneblends. In the case of the polypropylene blends the composition of interest is 20% polypropylene. At this composition thepolypropylene has been found to be soluble in linear low density polyethylene but insoluble in high, low and very lowdensity polyethylenes. The miscibility has been concluded from the crystallization kinetics and polarised optical microscopywith a hot stage. Polyethylene-polyethylene blends have been formed from polymers with similar average branching contentbut where they have different melting temperatures. Important consequences are to introduce long branches into apolyethylene that only has short branches, and to modify the morphology of a polyethylenes so that haze, gloss and strainhardening are improved. Polyethylene blends must be developed after careful consideration of the branch content anddistribution within each of the constituents. It is not sufficient to simply blend polyethylenes, with the desired range ofproperties, without regard to the miscibility of the blend composition.
