Application of Generalized Predictive Adaptive Control Algorithm in the Design of Missile Control System

To study the application of the generalized predictive adaptive control algorithm in missile control system, the algorithm is presented based on the recursive least square estimation, and a controller of the pitch channel of a missile is designed by using this algorithm. The simulations verify that the designed controller can meet the demands of the task well.

Adaptive Control of MIMO Mechanical Systems with Unknown Actuator Nonlinearities Based on the Nussbaum Gain Approach

This paper investigates MIMO mechanical systems with unknown actuator nonlinearities. A novel Nussbaum analysis tool for MIMO systems is established such that unknown time-varying control coefficients are tackled. In contrast to existing literatures on continuous-time systems, the newly-developed Nussbaum tool focuses on extending the traditional Nussbaum result from one dimensional case to the multiple one. Specifically, not only the multiple unknown input coefficients are extended to the time-varying, but also the limitation of the prior knowledge of coefficients' upper and lower bounds is removed. Furthermore, an adaptive robust controller associated with the proposed tool is presented. The asymptotic tracking of MIMO mechanical systems is guaranteed with the help of the Lyapunov Theorem. Finally, a simulation example is provided to examine the validity of the proposed scheme. © 2014 Chinese Association of Automation.

Observer-based adaptive control of uncertain time-delay switched systems with stuck actuator faults

This paper concerns the observer-based adaptive control problem of uncertain time-delay switched systems with stuck actuator faults. Under the case where the original controller cannot stabilize the faulty system, multiple adaptive controllers are designed and a suitable switching logic is incorporated to ensure the closed-loop system stability and state tracking. New delay-independent sufficient conditions for asymptotic stability are obtained in terms of linear matrix inequalities based on piecewise Lyapunov stability theory. On the other hand, adaptive laws for on-line updating of some of the controller parameters are also designed to compensate the effect of stuck failures. Finally, simulation results for reference [1] model show that the design is feasible and efficient.

Adaptive Control of Active Balancing System for a Fast Speed-varying Jeffcott Rotor with Actuator Time Delay

Due to actuator time delay existing in an adaptive control of the active balancing system for a fast speed-varying Jeffcott rotor, if an unsynchronized control force (correction imbalance) is applied to the system, it may lead to degradation in control efficiency and instability of the control system. In order to avoid these shortcomings, a simple adaptive controller was designed for a strictly positive real rotor system with actuator time delay, then a Lyapunov-Krasovskii functional was constructed after an appropriate transform of this sys-tem model, the stability conditions of this adaptive control system with actuator time delay were derived. After adding a filter function, the active balancing system for the fast speed-varying Jeffcott rotor with actuator time delay can easily be converted to a strictly positive real system, and thus it can use the above adaptive controller satisfying the stability conditions. Finally, numerical simulations show that the adaptive controller proposed works very well to perform the active balancing for the fast speed-varying Jeffcott rotor with actuator time delay.

Adaptive control of anti-aircraft missile launcher mounted on a mobile base

This paper presents the problem of control of anti-aircraft missile launcher mounted on a moving carrier-vehicle. Direct excitations on the vehicle from the road cause adverse vibrations of the launcher. In order to increase the precision of the guiding system in the conditions of self-propelled movement of the setup on a bumpy road, the adaptive control algorithm was proposed. Some research results of computer simulation are presented in a graphical form.

Precision Motion Control of Hydraulic Actuator Using Adaptive Back-Stepping Sliding Mode Controller

Hydraulic actuators are highly nonlinear when they are subjected to different types of model uncertainties and dynamic disturbances.These unfavorable factors adversely affect the control performance of the hydraulic actuator.Although various control methods have been employed to improve the tracking precision of the dynamic system,optimizing and adjusting control gain to mitigate the hydraulic actuator model uncertainties remains elusive.This study presents an adaptive back-stepping sliding mode controller(ABSMC)to enhance the trajectory tracking precision,where the virtual control law is constructed to replace the position error.The adaptive control theory is introduced in back-stepping controller design to compensate for the model uncertainties and time-varying disturbances.Based on Lyapunov theory,the finite-time convergence of the position tracking errors is proved.Furthermore,the effectiveness of the developed control scheme is conducted via extensive comparative experiments.

Fuzzy Proportional Integral Derivative control of a voice coil actuator system for adaptive deformable mirrors

Research on adaptive deformable mirror technology for voice coil actuators(VCAs)is an important trend in the development of large ground-based telescopes.A voice coil adaptive deformable mirror contains a large number of actuators,and there are problems with structural coupling and large temperature increases in their internal coils.Additionally,parameters of the traditional proportional integral derivative(PID)control cannot be adjusted in real-time to adapt to system changes.These problems can be addressed by introducing fuzzy control methods.A table lookup method is adopted to replace real-time calculations of the regular fuzzy controller during the control process,and a prototype platform has been established to verify the effectiveness and robustness of this process.Experimental tests compare the control performance of traditional and fuzzy proportional integral derivative(Fuzzy-PID)controllers,showing that,in system step response tests,the fuzzy control system reduces rise time by 20.25%,decreases overshoot by 78.24%,and shortens settling time by 67.59%.In disturbance rejection experiments,fuzzy control achieves a 46.09%reduction in the maximum deviation,indicating stronger robustness.The Fuzzy-PID controller,based on table lookup,outperforms the standard controller significantly,showing excellent potential for enhancing the dynamic performance and disturbance rejection capability of the voice coil motor actuator system.

Application of a Robust Model Reference Adaptive Control Algorithm to a Nonlinear Automotive Actuator

Model reference adaptive control is a viable control method to impose the demanded dynamics on plants whose parameters are affected by large uncertainty. In this paper, we show by means of experiments that robust adaptive methods can effectively face nonlinearities that are common to many automotive electromechanical devices. We consider here, as a representative case study, the control of a strongly nonlinear automotive actuator. The experimental results confirm the effectiveness of the method to cope with unmodeled nonlinear terms and unknown parameters. In addition, the engineering performance indexes computed on experimental data clearly show that the robust adaptive strategy provides better performance compared with those given by a classical model-based control solution with fixed gains.

Design of a Kind of Model Reference Adaptive Missile Control System

Aim To present an adaptive missile control system adaped to the external disturbance and the mobility of target movement. Methods Model reference adaptive control (MRAC) was applied and modified in the light of the traits of the anti tank missile. Results Simulation results demonstrated this control system satisfied the requirement of anti tank missile of dive overhead attack. Conclusion It is successful to use MRAC in missile control system design, the quality is better than that designed by classical control theory.

Adaptive Dynamic Surface Control for Integrated Missile Guidance and Autopilot

Integrated guidance and control for homing missiles utilizing adaptive dynamic surface control approach is considered based on the three channels independence design idea. A time-varying integrated guidance and control model with unmatched uncertainties is first formulated for the pitch channel, and an adaptive dynamic surface control algorithm is further developed to deal with these unmatched uncertainties. It is proved that the proposed feedback controller can ensure not only the accuracy of target interception, but also the stability of the missile dynamics. Then, the same control approach is further applied to the control design of the yaw and roll channels. The 6-degree-of-freedom （6-DOF） nonlinear missile simulation results demonstrate the feasibility and advantage of the proposed integrated guidance and control design scheme.

Backstepping adaptive fuzzy control of uncertain nonlinear systems against actuator faults

A class of unknown nonlinear systems subject to uncertain actuator faults and external disturbances will be studied in this paper with the help of fuzzy approximation theory. Using backstepping technique, a novel adaptive fuzzy control approach is proposed to accommodate the uncertain actuator faults during operation and deal with the external disturbances though the systems cannot be linearized by feedback. The considered faults are modeled as both loss of effectiveness and lock-in-place （stuck at some unknown place）. It is proved that the proposed control scheme can guarantee all signals of the closed-loop system to be semi-globally uniformly ultimately bounded and the tracking error between the system output and the reference signal converge to a small neighborhood of zero, though the nonlinear functions of the controlled system as well as the actuator faults and the external disturbances are all unknown. Simulation results demonstrate the effectiveness of the control approach.

Adaptive RBF neural network control of robot with actuator nonlinearities

In this paper, an adaptive neural network control scheme for robot manipulators with actuator nonlinearities is presented. The control scheme consists of an adaptive neural network controller and an actuator nonlinearities compensator. Since the actuator nonlinearities are usually included in the robot driving motor, a compensator using radial basis function (RBF) network is proposed to estimate the actuator nonlinearities and eliminate their effects. Subsequently, an adaptive neural network controller that neither requires the evaluation of inverse dynamical model nor the time-consuming training process is given. In addition, GL matrix and its product operator are introduced to help prove the stability of the closed control system. Considering the adaptive neural network controller and the RBF network compensator as the whole control scheme, the closed-loop system is proved to be uniformly ultimately bounded (UUB). The whole scheme provides a general procedure to control the robot manipulators with actuator nonlinearities. Simulation results verify the effectiveness of the designed scheme and the theoretical discussion.

Adaptive fault-tolerant control of linear time-invariant systems in the presence of actuator saturation

This paper studies the problem of designing adaptive fault-tolerant controllers for linear tirne-invariant systems with actuator saturation. New methods for designing indirect adaptive fault-tolerant controllers via state feedback are presented for actuator fault compensations. Based on the on-line estimation of eventual faults, the adaptive fault-tolerant controller parameters are updating automatically to compensate the fault effects on systems. The designs are developed in the framework of linear matrix inequality （LMI） approach, which can enlarge the domain of attraction of closed-loop systems in the cases of actuator saturation and actuator failures. Two examples are given to illustrate the effectiveness of the design method.

Adaptive fault-tolerant control of linear systems with actuator saturation and L_2-disturbances

This paper studies the problem of designing adaptive fault-tolerant H-infinity controllers for linear timeinvariant systems with actuator saturation. The disturbance tolerance ability of the closed-loop system is measured by an optimal index. The notion of an adaptive H-infinity performance index is proposed to describe the disturbance attenuation performances of closed-loop systems. New methods for designing indirect adaptive fault-tolerant controllers via state feedback are presented for actuator fault compensations. Based on the on-line estimation of eventual faults, the adaptive fault-tolerant controller parameters are updated automatically to compensate for the fault effects on systems. The designs are developed in the framework of the linear matrix inequality （LMI） approach, which can guarantee the disturbance tolerance ability and adaptive H-infinity performances of closed-loop systems in the cases of actuator saturation and actuator failures. An example is given to illustrate the efficiency of the design method.

Robust adaptive control for uncertain nonlinear systems with unknown control directions and actuator nonlinearity

A robust adaptive control scheme is proposed for a class of uncertain nonlinear systems in strict feedback form with both unknown control directions and non-symmetric dead-zone nonlinearity based on backstepping design. The conditions that the dead-zone slopes and the boundaries are equal and symmetric are removed by simplifying nonlinear dead-zone input model, the assumption that the priori knowledge of the control directions to be known is eliminated by utilizing Nussbaum-type gain technique and neural networks （NN） approximation capability. The possible controller singularity problem and the effect of dead-zone input nonlinearity are avoided perfectly by combining integral Lyapunov design with sliding mode control strategy. All the signals in the closed-loop system are guaranteed to be semi-globally uniformly ultimately bounded and the tracking error of the system is proven to be converged to a small neighborhood of the origin. Simulation results demonstrate the effectiveness of the proposed control scheme.

Adaptive high precision position control of servo actuator with friction compensation using LuGre model

Adaptive control of servo actuator with nonlinear friction compensation is addressed. LuGre dynamic friction model is adopted to characterize the nonlinear friction and a new kind of slid ing mode observer is designed to estimate the internal immeasurable state of LuGre model. Based on the estimated friction state, adaptive laws are designed to identify the unknown model parameters and the external disturbances, and the system stability and asymptotic trajectory tracking perform ance are guaranteed by Lyapunov function. The position tracking performance is verified by the ex perimental results.

A parameter estimation based adaptive actuator failure compensation control scheme

An adaptive actuator failure compensation control scheme is developed using an indirect adaptive control method,by calculating the controller parameters from adaptive estimates of system parameters and actuator failure parameters.A key technical issue is how to deal with the actuator failure uncertainties such as failure pattern,time and values.A complete parametrization covering all possible failures is used to solve this issue for adaptive parameter estimation.A simultaneous mapping from the estimated system/failure parameters to the controller parameters is employed to make the control system capable of ensuring the desired system performance under failures,which is verified by simulation results.

A finite-time fuzzy adaptive output-feedback fault-tolerant control for underactuated wheeled mobile robots systems

This paper investigates the adaptive fuzzy finite-time output-feedback fault-tolerant control (FTC) problemfor a class of nonlinear underactuated wheeled mobile robots (UWMRs) system with intermittent actuatorfaults. The UWMR system includes unknown nonlinear dynamics and immeasurable states. Fuzzy logic systems(FLSs) are utilized to work out immeasurable functions. Furthermore, with the support of the backsteppingcontrol technique and adaptive fuzzy state observer, a fuzzy adaptive finite-time output-feedback FTC scheme isdeveloped under the intermittent actuator faults. It is testifying the scheme can ensure the controlled nonlinearUWMRs is stable and the estimation errors are convergent. Finally, the comparison results and simulationvalidate the effectiveness of the proposed fuzzy adaptive finite-time FTC approach.

Practical prescribed-time fuzzy tracking control for uncertain nonlinear systems with time-varying actuators faults

The paper investigates the practical prescribed-time fuzzy tracking control problem for a category of nonlinear system subject to time-varying actuator faults.The presence of unknown nonlinear dynamics and actuator faults makes achieving tracking control within a prescribed-time challenging.To tackle this issue,we propose a novel practical prescribed-time fuzzy tracking control strategy,which is independent of the initial state of the system and does not rely on precise modeling of the system and actuators.We apply the approximation capabilities of fuzzy logic systems to handle the unknown nonlinear functions and unidentified actuator faults in the system.The piecewise controller and adaptive law constructed based on piecewise prescribed time-varying function and backstepping technique method establish the theoretical framework of practical prescribed-time tracking control,and extend the range of prescribed-time tracking control to infinity.Regardless of the initial conditions,the proposed control strategy can guarantee that all signals remain uniformly bounded within the practical prescribed time in the presence of unknown nonlinear item and time-varying actuator faults.Simulation example is presented to demonstrate the effectiveness of the proposed control strategy.

A model reference adaptive control based method for actuator delay estimation in real-time testing

Real-time testing provides a viable experimental technique to evaluate the performance of structural systems subjected to dynamic loading.Servo-hydraulic actuators are often utilized to apply calculated displacements from an integration algorithm to the experimental structures in a real-time manner.The compensation of actuator delay is therefore critical to achieve stable and reliable experimental results.The advances in compensation methods based on adaptive control theory enable researchers to accommodate variable actuator delay and achieve good actuator control for real-time tests.However,these adaptive methods all require time duration for actuator delay adaptation.Experiments show that a good actuator delay estimate can help optimize the performance of the adaptive compensation methods.The rate of adaptation also requires that a good actuator delay estimate be acquired especially for the tests where the peak structural response might occur at the beginning of the tests.This paper presents a model reference adaptive control based method to identify the parameter of a simplified discrete model for servo-hydraulic dynamics and the resulting compensation method.Simulations are conducted using both numerical analysis and experimental results to evaluate the effectiveness of the proposed estimation method.