Residual stress modeling of mitigated fused silica damage sites with CO_(2)laser annealing

A numerical model based on measured fictive temperature distributions is explored to evaluate the residual stress fields of CO_(2)laser-annealed mitigated fused silica damage sites.The proposed model extracts the residual strain from the differences in thermoelastic contraction of fused silica with different fictive temperatures from the initial frozen-in temperatures to ambient temperature.The residual stress fields of mitigated damage sites for the CO_(2)laser-annealed case are obtained by a finite element analysis of equilibrium equations and constitutive equations.The simulated results indicate that the proposed model can accurately evaluate the residual stress fields of laser-annealed mitigated damage sites with a complex thermal history.The calculated maximum hoop stress is in good agreement with the reported experimental result.The estimated optical retardance profiles from the calculated radial and hoop stress fields are consistent with the photoelastic measurements.These results provide sufficient evidence to demonstrate the suitability of the proposed model for describing the residual stresses of mitigated fused silica damage sites after CO_(2)laser annealing.

Circulating Neutrophil Counts Decrease in Response to Mitigated Air Quality in Stable COPD Patients

This three-year study, based on the Guangzhou Institute of Respiratory Disease （GRID）, chronic obstructive pulmonary disease （COPD） Biobank, was conducted in 36 COPD patients to estimate whether changes in levels of leukocytes, erythrocytes, hemoglobin, and platelets were related to changes in air pollutant concentration. Daily NO2 levels exhibited significant differences between baseline years and the 2010 Asian Game period. We observed significant reductions in leukocyte and neutrophils counts levels, by 15.51% and 23.01%, from pre-Asian Games to during-Asian Games, respectively. In the post-Asian Game period, most pollutants approximated pre-Asian Game period levels, and similar effects were demonstrated in leukocyte and neutrophil counts. For both items, we identified significant increases resulting from elevated NO2 at lag days 0-2/5-6. We concluded that reductions in pollutants during the intervention period were associated with inactivation of hematological events in COPD.

Bone loss from Wnt inhibition mitigated by concurrent alendronate therapy

Dysregulated Wnt signaling is associated with the pathogenesis of cancers, fibrosis, and vascular diseases. Inhibition of Wnt signaling has shown efficacy in various pre-clinical models of these disorders. One of the key challenges in developing targeted anti-cancer drugs is to balance efficacy with on-target toxicity. Given the crucial role Wnts play in the differentiation of osteoblasts and osteoclasts, acute inhibition of Wnt signaling is likely to affect bone homeostasis. In this study, we evaluated the skeletal effect of small molecule inhibitor of an o-acyl transferase porcupine（PORCN） that prevents Wnt signaling by blocking the secretion of all Wnts. Micro-computed tomography and histomorphometric evaluation revealed that the bones of mice treated with two structurally distinct PORCN inhibitors LGK974 and ETC-1922159（ETC-159） had loss-of-bone volume and density within 4 weeks of exposure. This decreased bone mass was associated with a significant increase in adipocytes within the bone marrow. Notably,simultaneous administration of a clinically approved anti-resorptive, alendronate, a member of the bisphosphonate family,mitigated loss-of-bone mass seen upon ETC-159 treatment by regulating activity of osteoclasts and blocking accumulation of bone marrow adipocytes. Our results support the addition of bone protective agents when treating patients with PORCN inhibitors.Mitigation of bone toxicity can extend the therapeutic utility of Wnt pathway inhibitors.

Human Effects on Tabounsou’s Coastal Ecosystem and the Matoto-Conakry Case Study of Sustainable Management Practices

Humans have always engaged with their surroundings and the ecology in which they live.However,during the industrial age,this contact has been more intense and has had a substantial impact on environment and ecosystems.For example,overexploitation of natural resources,mining,pollution,and deforestation are all elements that negatively affect biodiversity and natural resources.Few studies have been conducted to evaluate the damage caused,despite the significant uncontrolled pressure from human activity.However,maintaining its environment is essential to the survival of coastal fishing.Goal:This study’s goal was to evaluate how human activity affected Tabounsou’s coastal ecology in order to suggest remedial actions for sustainable management.The following was the methodological approach used:executive consultation and archival analysis;stakeholder survey(locals,farmers,salt producers,fishers,and loggers);inventory of species;anthropogenic activity inventory;evaluation of how human activity affects aquatic life in the research region;suggestion and action for sustainable management;Outcome:Executive consultation indicated that the main issues are:construction projects that reduce the estuary’s surface area;agricultural practices such as woodcutting and salt farming;the rise in resource exploitation;noncompliance with fisheries laws;and the catching of young fish.Eighty-three percent of fisherman ditch their nets on the coast after using them,but only seventeen percent burn them.With a 75%frequency rate,the same survey indicates that most fisherman fish around the coast.In the Tabounsou area,according to loggers’survey,68%of the wood cut is Rhizophora,24%is Avicennia,and 8%is Laguncularia.Three fish stocks,representing nine families and nine species,were identified by the species inventory.At 18%and 15%,respectively,the actors most frequently capture the species Pseudotolithus elongatus and Arius parkii.According to a poll of 30 farmers,90%of them apply fertilizer to their soil,while only 10%do not.During the dry season,salt is grown.According to two actors,Bougna Toro Toro produces 100 kg of salt per day,followed by Khoumawadé,which produces 80 kg,and Toumbibougni,which produces 70 kg.

An Unmitigated Disaster: Shifting from Response and Recovery to Mitigation for an Insurable Future

Australian households are increasingly vulnerable to natural hazard-related disasters. To manage disaster risk, government commissioned inquiries have called for greater investment in mitigation. This article critically examines the call for a shift in funding priority towards pre-disaster mitigation measures, in the context of growing concerns around the ability of households to access and afford insurance. It examines mitigation measures in the context of three prominent Australian disasters: the Black Saturday bushfires(Victoria, 2009), the Queensland floods(2010–2011), and Cyclone Yasi(Queensland, 2011). We argue that as a mode of disaster security, mitigation operates as a complex assemblage of logics and practices of protection, preparedness, and resilience, which problematizes simplistic protection/resilience binaries. On the one hand, mitigation serves as a mode of protection, which underscores the dominant maladaptive rationality of insurance. It promises a collective solution to uninsurability that is limited by government fiscal constraints and growing employment of risk-reflective insurance pricing.On the other hand, there is evidence of an emergent rationality of household insurance as a path to resilience and preparedness—for example, in the development of insurance systems that price household retrofitting technologies and in the development of policyholder education campaigns. This resilience rationality holds the promise of securing individuals previously excluded from insurance.However, for householders lacking the necessary physical,cognitive, and financial capacities to make themselves and their properties resilient, the transition to a pre-disaster mitigation mode of security will likely do little to alleviate disadvantage and marginalization.

Self-discharge mitigated supercapacitors via hybrid CuO-nickel sulfide heterostructure for energy efficient, wireless data storage application

With the surge of demand for instant high power in miniaturized electronic and mechanical systems,supercapacitors(SCs)are considered as one of the viable candidates to fulfill the requirements.Thus,long-term resilience and superior energy density associated with self-discharge in SCs are obviously critical,but securing electrode materials,which can meet both benefits of SCs and persist charged potential for a comparatively prolonged duration,are still elusive.Herein,hierarchically refined nickel-sulfide heterostructure(CuO-NS)on CuO(CO)scaffold is achieved through optimized film formation,exhibiting a threefold improvement in the essential electrochemical characteristics and outstanding capacitance retention(∼5%loss).Self-discharge behavior and its mechanism are systematically investigated via morphological control and nanostructural evolution.Furthermore,significant mitigation of self-discharge owing to an increase in surface area and refined nanostructure is displayed.Remarkably,CuO-NS2(20 cycle overcoating)based SC can retain over 60%of the charged potential for a complete voltage holding and a self-discharge test for 16 h.An appealing demonstration of wireless power transmission in burst mode is demonstrated for secure digital(SD)card data writing,powered by SCs,which substantiates that it can be readily leveraged in power management systems.This enables us to realize one of the envisioned applications soon.

Alloy design for laser powder bed fusion additive manufacturing:a critical review

Metal additive manufacturing(AM)has been extensively studied in recent decades.Despite the significant progress achieved in manufacturing complex shapes and structures,challenges such as severe cracking when using existing alloys for laser powder bed fusion(L-PBF)AM have persisted.These challenges arise because commercial alloys are primarily designed for conventional casting or forging processes,overlooking the fast cooling rates,steep temperature gradients and multiple thermal cycles of L-PBF.To address this,there is an urgent need to develop novel alloys specifically tailored for L-PBF technologies.This review provides a comprehensive summary of the strategies employed in alloy design for L-PBF.It aims to guide future research on designing novel alloys dedicated to L-PBF instead of adapting existing alloys.The review begins by discussing the features of the L-PBF processes,focusing on rapid solidification and intrinsic heat treatment.Next,the printability of the four main existing alloys(Fe-,Ni-,Al-and Ti-based alloys)is critically assessed,with a comparison of their conventional weldability.It was found that the weldability criteria are not always applicable in estimating printability.Furthermore,the review presents recent advances in alloy development and associated strategies,categorizing them into crack mitigation-oriented,microstructure manipulation-oriented and machine learning-assisted approaches.Lastly,an outlook and suggestions are given to highlight the issues that need to be addressed in future work.

Using cemented paste backfill to tackle the phosphogypsum stockpile in China:A down-to-earth technology with new vitalities in pollutant retention and CO_(2) abatement

Phosphogypsum(PG),a hard-to-dissipate by-product of the phosphorus fertilizer production industry,places strain on the biogeochemical cycles and ecosystem functions of storage sites.This pervasive problem is already widespread worldwide and requires careful stewardship.In this study,we review the presence of potentially toxic elements(PTEs)in PG and describe their associations with soil properties,anthropogenic activities,and surrounding organisms.Then,we review different ex-/in-situ solutions for promoting the sustainable management of PG,with an emphasis on in-situ cemented paste backfill,which offers a cost-effective and highly scalable opportunity to advance the value-added recovery of PG.However,concerns related to the PTEs'retention capacity and long-term effectiveness limit the implementation of this strategy.Furthermore,given that the large-scale demand for ordinary Portland cement from this conventional option has resulted in significant CO_(2) emissions,the technology has recently undergone additional scrutiny to meet the climate mitigation ambition of the Paris Agreement and China's Carbon Neutrality Economy.Therefore,we discuss the ways by which we can integrate innovative strategies,including supplementary cementitious materials,alternative binder solutions,CO_(2) mineralization,CO_(2) curing,and optimization of the supply chain for the profitability and sustainability of PG remediation.However,to maximize the co-benefits in environmental,social,and economic,future research must bridge the gap between the feasibility of expanding these advanced pathways and the multidisciplinary needs.

Towards carbon neutrality of calcium carbide-based acetylene production with sustainable biomass resources

Acetylene is produced from the reaction between calcium carbide(CaC_(2))and water,while the production of CaC_(2) generates significant amount of carbon dioxide not only because it is an energy-intensive process but also the raw material for CaC_(2) synthesis is from coal.Here,a comprehensive biomass-to-acetylene process was constructed that integrated several units including biomass pyrolysis,oxygen-thermal CaC_(2) fabrication and calcium looping.For comparison,a coal-to-acetylene process was also established by using coal as feedstock.The carbon efficiency,energy efficiency and environmental impacts of the bio-based calcium carbide acetylene(BCCA)and coal-based calcium carbide acetylene(CCCA)processes were systematically analyzed.Moreover,the environmental impacts were further evaluated by applying thermal integration at system level and energy substitution in CaC_(2) furnace.Even though the BCCA process showed lower carbon efficiency and energy efficiency than that of the CCCA process,life cycle assessment demonstrated the BCCA(1.873 kgCO_(2eq) kg-prod^(-1))a lower carbon footprint process which is 0.366 kgCO_(2eq) kg-prod^(-1) lower compared to the CCCA process.With sustainable energy(biomass power)substitution in CaC_(2) furnace,an even lower GWP value of 1.377 kgCO_(2eq) kg-prod^(-1) can be achieved in BCCA process.This work performed a systematic analysis on integrating biomass into industrial acetylene production,and revealed the positive role of biomass as raw material(carbon)and energy supplier.

Cooperative Anti-Jamming and Interference Mitigation for UAV Networks: A Local Altruistic Game Approach

To improve the anti-jamming and interference mitigation ability of the UAV-aided communication systems, this paper investigates the channel selection optimization problem in face of both internal mutual interference and external malicious jamming. A cooperative anti-jamming and interference mitigation method based on local altruistic is proposed to optimize UAVs’ channel selection. Specifically, a Stackelberg game is modeled to formulate the confrontation relationship between UAVs and the jammer. A local altruistic game is modeled with each UAV considering the utilities of both itself and other UAVs. A distributed cooperative anti-jamming and interference mitigation algorithm is proposed to obtain the Stackelberg equilibrium. Finally, the convergence of the proposed algorithm and the impact of the transmission power on the system loss value are analyzed, and the anti-jamming performance of the proposed algorithm can be improved by around 64% compared with the existing algorithms.

Carbon sequestration in a bamboo plantation:a case study in a Mediterranean area

In the Mediterranean region,despite bamboo being an alien species that can seriously alter plant and ani-mal biocoenosis,the area occupied by bamboo plantations continues to increase,especially for the purpose to seques-ter carbon(C).However,the C dynamics in the soil-plant system when bamboo is grown outside its native area are poorly understood.Here we investigated the C mitigation potential of the fast-growing Moso bamboo(Phyllostachys edulis)introduced in Italy for climate-change mitigation.We analyzed aboveground(AGB)and belowground(as root/shoot ratio)biomass,litter and soil organic C(SOC)at O-15-and 15-30-cm depths in a 4-year-old bamboo plantation in comparison with the former annual cropland on which the bamboo was established.To have an idea of the maximum C stored at an ecosystem level,a natural forest adjacent the two sites was also considered.In the plantation,C accumulation as AGB was stimulated,with 14.8±3.1 Mg C ha^(-1) stored in 3 years;because thinning was done to remove culms from the first year,the mean sequestration rate was 4.9 Mg C ha^(-1) a^(-1).The sequestration rates were high but comparable to other fast-growing tree species in Italy(e.g.,Pinus nigra).SOC was significantly higher in the bamboo plantation than in the cropland only at the 0-15 cm depth,but SOC stock did not differ.Possibly 4 years were not enough time for a clear increase in SOC,or the high nutrient uptake by bamboos might have depleted the soil nutrients,thus inhibiting the soil organic matter formation by bacteria.In comparison,the natural forest had significantly higher C levels in all the pools.For C dynamics at an ecosystem level,the bamboo plantation on the former annual cropland led to substantial C removal from the atmosphere(about 12 Mg C ha^(-1) a^(-1)).However,despite the promising C sequestration rates by bamboo,its introduction should be carefully considered due to potential ecological problems caused by this species in overexploited environments such as the Mediterranean area.

A review of methane leakage from abandoned oil and gas wells:A case study in Lubbock,Texas,within the Permian Basin

In the pursuit of global net zero carbon emissions and climate change mitigation,ongoing research into sustainable energy sources and emission control is paramount.This review examines methane leakage from abandoned oil and gas(AOG)wells,focusing particularly on Lubbock,a geographic area situated within the larger region known as the Permian Basin in West Texas,United States.The objective is to assess the extent and environmental implications of methane leakage from these wells.The analysis integrates pertinent literature,governmental and industry data,and prior Lubbock reports.Factors affecting methane leakage,including well integrity,geological characteristics,and human activities,are explored.Our research estimates 1781 drilled wells in Lubbock,forming a foundation for targeted assessments and monitoring due to historical drilling trends.The hierarchy of well statuses in Lubbock highlights the prevalence of“active oil wells,”trailed by“plugged and abandoned oil wells”and“inactive oil wells.”Methane leakage potential aligns with these well types,underscoring the importance of strategic monitoring and mitigation.The analysis notes a zenith in“drilled and completed”wells during 1980-1990.While our study's case analysis and literature review reiterate the critical significance of assessing and mitigating methane emissions from AOG wells,it's important to clarify that the research does not directly provide methane leakage data.Instead,it contextualizes the issue's magnitude and emphasizes the well type and status analysis's role in targeted mitigation efforts.In summary,our research deepens our understanding of methane leakage,aiding informed decision-making and policy formulation for environmental preservation.By clarifying well type implications and historical drilling patterns,we aim to contribute to effective strategies in mitigating methane emissions from AOG wells.

Experimental investigation on weak shock wave mitigation characteristics of flexible polyurethane foam and polyurea

In recent years,explosion shock wave has been considered as a signature injury of the current military conflicts.Although strong shock wave is lethal to the human body,weak shock wave can cause many more lasting consequences.To investigate the protection ability and characteristics of flexible materials and structures under weak shock wave loading,the blast wave produced by TNT explosive is loaded on the polyurethane foam with the density of 200.0 kg/m3(F-200)and 400.0 kg/m3(F-400),polyurea with the density of 1100.0 kg/m^(3)(P-1100)and structures composed of the two materials,which are intended for individual protection.Experimental results indicate that the shock wave is attenuated to weak pressure disturbance after interacting with the flexible materials which are not damaged.The shock wave protective capability of single-layer materials is dependent on their thickness,density and microscopic characteristics.The overpressure,maximum pressure rise rate and impulse of transmitted wave decrease exponentially with increase in sample thickness.For the same thickness,F-400 provides better protective capability than F-200 while P-1100 shows the best protective capability among the three materials.In this study,as the materials are not destroyed,F-200 with a thickness more than10.0 mm,F-400 with a thickness more than 4.0 mm,and P-1100 with a thickness more than 1.0 mm can attenuate the overpressure amplitude more than 90.0%.Further,multi-layer flexible composites are designed.Different layer layouts of designed structures and layer thickness of the single-layer materials can affect the protective performance.Within the research range,the structure in which polyurea is placed on the impact side shows the optimal shock wave protective performance,and the thicknesses of polyurea and polyurethane foam are 1.0 mm and 4.0 mm respectively.The overpressure attenuation rate reached maximum value of 93.3%and impulse attenuation capacity of this structure are better than those of single-layer polyurea and polyurethane foam with higher areal density.

Determining the surface fault-rupture hazard zone for the Pazarcık segment of the East Anatolian fault zone through comprehensive analysis of surface rupture from the February 6,2023,Earthquake(Mw 7.7)

Following surface rupture observations in populated areas affected by the KahramanmaraşEarthquake(Mw 7.7)on February 6th,2023,along the Pazarcık segment of the East Anatolian Fault Zone(EAFZ),this study presents novel insights into physical criteria for delineating surface fault-rupture hazard zones(SRHZs)along ruptured strike-slip faults.To achieve this objective,three trench studies across the surface rupture were conducted on the Pazarcık segment of the EAFZ to collect field data,and earthquake recurrence intervals were interpreted using Bayesian statistics from previously conducted paleoseismological trenchings.The results of the proposed model indicate that the Pazarcık segment produced five significant surface-rupturing earthquakes in the last∼11 kyr:E1:11.13±1.74 kyr,E2:7.62±1.20 kyr,E3:5.34±1.05 kyr,E4:1.82±0.93 kyr,and E5:0.35±0.11 kyr.In addition,the recurrence intervals of destructive earthquakes on the subject in question range from 0.6 kyr to 4.8 kyr.Considering that the last significant earthquake occurred in 1513,the longest time since the most recent surface fault rupturing earthquake on this particular segment was 511 years.These results indicate that,in terms of the theoretical recurrence interval of earthquakes that can create surface ruptures on the Pazarcık segment,the period in which the February 6,2023,earthquake occurred was within the end of the expected return period.As a result,the potential for a devastating earthquake in the near future is not foreseen on the same fault.Finally,the SRHZ proposed for the Pazarcık section of Gölbaşıvillage was calculated as a 61-meter-wide offset on the fault lineament to reduce the negativities that may occur in the ruptured area in the future.It is recommended to take into account this width in the settlement of this area and nearby areas.

Rumen microbial degradation of bromoform from red seaweed(Asparagopsis taxiformis)and the impact on rumen fermentation and methanogenic archaea

Background The red macroalgae Asparagopsis is an effective methanogenesis inhibitor due to the presence of halogenated methane(CH_(4))analogues,primarily bromoform(CHBr_(3)).This study aimed to investigate the degradation process of CHBr3 from A taxiformis in the rumen and whether this process is diet-dependent.An in vitro batch culture system was used according to a 2×2 factorial design,assessing two A taxiformis inclusion rates[0(CTL)and 2%DM diet(AT)]and two diets[high-concentrate(HC)and high-forage diet(HF)].Incubations lasted for 72 h and samples of headspace and fermentation liquid were taken at 0,0.5,1,3,6,8,12,16,24,48 and 72 h to assess the pattern of degradation of CHBr_(3) into dibromomethane(CH_(2)Br_(2))and fermentation parameters.Additionally,an in vitro experiment with pure cultures of seven methanogens strains(Methanobrevibacter smithii,Methanobrevibacter ruminantium,Methanosphaera stadtmanae,Methanosarcina barkeri,Methanobrevibacter millerae,Methanorhermobacter wolfei and Methanobacterium mobile)was conducted to test the effects of increasing concentrations of CHBr3(0.4,2,10and 50μmol/L).Results The addition of AT significantly decreased CH_(4) production(P=0.002)and the acetate:propionate ratio(P=0.003)during a 72-h incubation.The concentrations of CHBr_(3) showed a rapid decrease with nearly 90%degraded within the first 3 h of incubation.On the contrary,CH_(2)Br_(2) concentration quickly increased during the first 6 h and then gradually decreased towards the end of the incubation.Neither CHBr_(3) degradation nor CH_(2)Br_(2) synthesis were affected by the type of diet used as substrate,suggesting that the fermentation rate is not a driving factor involved in CHBr_(3)degradation.The in vitro culture of methanogens showed a dose-response effect of CHBr3 by inhibiting the growth of M.smithii,M.ruminantium,M.stadtmanae,M.barkeri,M.millerae,M.wolfei,and M.mobile.Conclusions The present work demonstrated that CHBr_(3) from A.taxiformis is quickly degraded to CH_(2)Br_(2)in the rumen and that the fermentation rate promoted by different diets is not a driving factor involved in CHBr_(3)degradation.

Staphylococcus aureus and biofilms:transmission, threats, and promising strategies in animal husbandry

Staphylococcus aureus(S. aureus) is a common pathogenic bacterium in animal husbandry that can cause diseases such as mastitis, skin infections, arthritis, and other ailments. The formation of biofilms threatens and exacerbates S. aureus infection by allowing the bacteria to adhere to pathological areas and livestock product surfaces, thus triggering animal health crises and safety issues with livestock products. To solve this problem, in this review, we provide a brief overview of the harm caused by S. aureus and its biofilms on livestock and animal byproducts(meat and dairy products). We also describe the ways in which S. aureus spreads in animals and the threats it poses to the livestock industry. The processes and molecular mechanisms involved in biofilm formation are then explained. Finally, we discuss strategies for the removal and eradication of S. aureus and biofilms in animal husbandry, including the use of antimicrobial peptides, plant extracts, nanoparticles, phages, and antibodies. These strategies to reduce the spread of S. aureus in animal husbandry help maintain livestock health and improve productivity to ensure the ecologically sustainable development of animal husbandry and the safety of livestock products.

How far have we come?Review of main public policies to reduce landslide impacts in Brazil

During the rainy season in Brazil,landslides can have catastrophic consequences,including loss of life,damage to urban infrastructure and significant economic impacts.Now,more than eight million people in Brazil live in disaster-prone areas.The objective of this article is to present a chronological review of the principal policies and programmes at the national,state,and municipal levels,with an emphasis on their key actions aimed at mitigating the impact of disasters related to natural hazards,particularly landslides.Our analysis was based on official records of public policies from the national,state,and municipal governments.The results show that several initiatives were initially developed at the local and regional level.However,it was not until the late 1980s that a comprehensive organisation of civil protection at the national level emerged as a response measure.It is possible to highlight three phases(understanding,coexistence,and prevention)of institutional action focused on risk management in the face of disasters.Despite the growing knowledge of risk scenarios,disasters continue to occur in Brazil on an annual basis,revealing several obstacles to reducing their impact,particularly given the social and economic disparities between Brazilian regions and the applicability of public policies that must overcome the limitations of each municipality.

Enhancing CO_(2)mitigation potential and mechanical properties of shotcrete in underground mining utilizing microbially induced calcium carbonate precipitation

Achieving low-carbon development in the mining sector is fundamental for global carbon emissions abatement,especially considering the growing demand for mineral resources.Currently,the energy foot-print of mines emerges as the main carbon contributor.While cleaner energy sources have the potential for reducing emissions,transitioning to these sources remains challenging.This study presents a practical CO_(2)mitigation strategy for underground mining by integrating bacteria into shotcrete to enhance exca-vation.The findings demonstrate that bacteria can capture CO_(2)from the atmosphere,thereby increasing the carbonation reactions.X-ray diffraction(XRD),scanning electron microscope(SEM)and energy dis-persive spectrometer(EDS)analysis shows the captured CO_(2)present in the forms of calcite,vaterite,and aragonite.The formed carbonates intermingled with the precipitated calcium-silicate-hydrate(C-S-H)at relatively low bacteria additions,densifying the cementitious matrix and improving the mechan-ical properties.However,high bacteria concentrations lead to excess carbonates that consume C-S-H pre-cipitation,counteracting the benefits of carbonation and reducing mechanical strength.Optimal results were achieved with 0.3%bacteria by mass fraction,potentially mitigating 0.34 kg/m^(2)of CO_(2),which is approximately equivalent 567 g of CO_(2)absorbed by 1 g of bacteria based on the effectiveness demon-strated in this study.These findings are crucial for advancing emissions control in mining and supporting climate goals outlined in the Paris Agreement.

Nanoparticles and their crosstalk with stress mitigators:A novel approach towards abiotic stress tolerance in agricultural systems

Plants are exposed to adverse environmental conditions,including cold,drought,heat,salinity,and heavy metals,which negatively impact plant growth and productivity of edible crops worldwide.Although the previous literature summarized the nanoparticle's involvement in abiotic stress mitigation,the interaction of nanoparticles with other stress mitigators to overcome abiotic stress from plants remains unclear.Currently,nanotechnology is considered a growing new field in agriculture for understanding plants'adapted stress tolerance mechanisms.Recent research has shown that nanoparticles can effectively mitigate abiotic stress by interacting synergistically with plant growth regulators.To address this,we comprehensively demonstrated the combined positive potential of nanoparticles in combination with plant growth regulators(signaling molecules,phytohormones,nanoparticles-nanoparticles interaction,fungi,plant growth promoting rhizobacteria and other metal salts)to improve plant growth and mitigate abiotic stresses.Their co-applications augment the plant's growth,nutrient uptake,antioxidant defense system,water absorption,cell viability,water use efficiency,and photosynthetic and biochemical attributes by reducing oxidative stressors under various abiotic stresses in different plant species.This review provides a comprehensive overview of the combined applications of nanoparticles and plant growth regulators,a novel strategy to reduce the harmful effects of abiotic stress on plants.It identifies research gaps and recommends future studies to overcome their phytotoxicity worldwide.

Socio-scientific quantification of the comprehensive benefits of debris flow mitigation measures for villages in western Sichuan, China

Debris flow hazards seriously threaten thesafety and sustainable development of mountainousareas. Numerous debris flow mitigation measures havebeen implemented worldwide;however, acomprehensive assessment of the specific disasterreduction effects of these measures and their economic,social and ecological benefits is yet to be performed.The western region of Sichuan Province frequentlysuffers from geohazards such as debris flow, and thegovernment has adopted many mitigation measures.This study assessed the benefits of debris flowmitigation measures and identified the key influencingfactors via a field-based study conducted in 81 villagesin western Sichuan province, China. A framework forthe evaluation of the benefits of rural debris flowmitigation measures was constructed andquantitatively evaluated using a survey. Snowballsampling was performed to recruit 81 village leadersand 468 farmers. The results showed that managementand engineering measures were the main methodsused to mitigate debris flow;ecological measures wereauxiliary. The average satisfaction scores of farmers forthese three types of measures were 4.07, 3.90, and 3.56,respectively (as measured on a five-point Likert scale).In contrast, in terms of the benefits of these mitigationmeasures, only a small proportion of villages (11.11%)obtained a high level of comprehensive benefits fromthe debris flow mitigation measures, while the majority(88.89%) received medium to low-level benefits. Toimprove this situation, we further studied and foundthat the main factors that restricted villages fromachieving high-level comprehensive benefits were theunpredictable nature of debris flows, labour forceoutflow and remoteness. Effective control measures, agood economic environment and strong governmentassistance were reported as crucial factors forimproving these comprehensive benefits. This studyprovides socio-scientific references for decisionmakingon rural debris flow mitigation measures while keeping villages at the centre of economic development.