This pilot study intended to investigate the application of Mixing Zone Guidelines in northern Sweden. The EC （European Commission）-Mixing Zone Guidelines were applied to seven effluent discharges. The effluents wer...This pilot study intended to investigate the application of Mixing Zone Guidelines in northern Sweden. The EC （European Commission）-Mixing Zone Guidelines were applied to seven effluent discharges. The effluents were from industrial processes used in the Ronnskar smelter, in northern Sweden. Each outlet in the smelter area discharges water into the Bothnian bay of the Baltic Sea. Cadmium （Cd）, mercury （Hg）, nickel （Ni） and lead （Pb） were the primary substances present in the effluents. A ＂Tiered Approach＂ was followed for mixing zone assessments in each of the discharge points. Discharge Test was used at Tier 2 and CORMIX （Cornell Mixing Zone Expert System model）, version 7, at Tier 3. At each discharge point, the AA-EQS （annual average-environmental quality standard） for each metal was met within a distance of 500 m from the outfalls. This distance was exceeded to meet the MAC-EQS （maximum allowable concentration-environmental quality standard） criteria at points 1 and 3 for total Hg concentrations. However, for the proper application of Mixing Zone Guidelines, a version of the Discharge Test for coastal waters should be developed and used. The decision at which tier the dissolved metal concentration should be compared with EQS values could depend on the effluent characteristics. For Swedish coastal waters, some consideration should be given to the background concentration of metals.展开更多
Al_(2)O_(3)-MgO and Al_(2)O_(3)-spinel low cement castables(LCC-AM and LCC-AS)have been extensively used in steel ladles as working linings.Nevertheless,the use of alumina-magnesia gunning mixes has been mainly kept f...Al_(2)O_(3)-MgO and Al_(2)O_(3)-spinel low cement castables(LCC-AM and LCC-AS)have been extensively used in steel ladles as working linings.Nevertheless,the use of alumina-magnesia gunning mixes has been mainly kept for maintaining these castable linings,because of high rebound loss,poor green strength,high porosity and short life-span.Thanks to a high BET alumina(MC-G),it is now possible to develop a series of high-performance no-cement or low-cement Al_(2)O_(3)-MgO gunning mixes(NCG-AM or LCG-AM).The paper focuses on the BOF slag resistance of NCG-AM,LCG-AM,LCC-AM and LCC-AS.The corrosion mechanisms of rotary slag samples were studied by scanning electron microscopy(SEM/EDS).The results reveal different microstructures around MgO particles,depending on the four used compositions.Continuous and thicker spinel phases were formed in NCG-AM,which was proved to have the best corrosion resistance after the dynamic slag test.MC-G can provide a high diffusion flux of Al^(3+)in terms of kinetics and hence inhibits Kirkendall porosity around MgO particles.In addition,a continuous spinel phase acts like a pinning nail to reinforce the matrix and thus decreases erosion by slag.In contrast to NCG-AM,the porous spinel phase was found around unreacted MgO particles and some particles were carried away near the interface of LCC-AM and slag.The NCG-AM containing MC-G had been tested in two steel plants,and it extended the service life of the ladles up to 50%.In addition,this study suggests the potential application of NCG-AM as steel ladle linings.展开更多
AIM: To determine whether normal genetically immunocompetent rodent hosts could be manipulated to accept human hepatocyte transplants with long term survival without immunosuppression. METHODS: Tolerance towards human...AIM: To determine whether normal genetically immunocompetent rodent hosts could be manipulated to accept human hepatocyte transplants with long term survival without immunosuppression. METHODS: Tolerance towards human hepatocytes was established by injection of primary human hepatocytes or Huh7 human hepatoma cells into the peritoneal cavities of fetal rats. Corresponding cells were subsequently transplanted into newborn rats via intrasplenic injection within 24h after birth. RESULTS: Mixed lymphocyte assays showed that spleen cells from non-tolerized rats were stimulated to proliferate when exposed to human hepatocytes, while cells from tolerized rats were not. Injections made between 15 d and 17 d of gestation produced optimal tolerization. Transplanted human hepatocytes in rat livers were visualized by immunohistochemical staining of human albumin. By dot blotting of genomic DNA in livers of tolerized rats 16 weeks after hepatocyte transplantation, it was found that approximately 2.5 X 10(5) human hepatocytes survived per rat liver. Human albumin mRNA was detected in rat livers by RT-PCR for 15 wk, and human albumin protein was also detectable in rat serum. CONCLUSION: Tolerization of an immuno-competent rat can permit transplantation, and survival of functional human hepatocytes.展开更多
文摘This pilot study intended to investigate the application of Mixing Zone Guidelines in northern Sweden. The EC （European Commission）-Mixing Zone Guidelines were applied to seven effluent discharges. The effluents were from industrial processes used in the Ronnskar smelter, in northern Sweden. Each outlet in the smelter area discharges water into the Bothnian bay of the Baltic Sea. Cadmium （Cd）, mercury （Hg）, nickel （Ni） and lead （Pb） were the primary substances present in the effluents. A ＂Tiered Approach＂ was followed for mixing zone assessments in each of the discharge points. Discharge Test was used at Tier 2 and CORMIX （Cornell Mixing Zone Expert System model）, version 7, at Tier 3. At each discharge point, the AA-EQS （annual average-environmental quality standard） for each metal was met within a distance of 500 m from the outfalls. This distance was exceeded to meet the MAC-EQS （maximum allowable concentration-environmental quality standard） criteria at points 1 and 3 for total Hg concentrations. However, for the proper application of Mixing Zone Guidelines, a version of the Discharge Test for coastal waters should be developed and used. The decision at which tier the dissolved metal concentration should be compared with EQS values could depend on the effluent characteristics. For Swedish coastal waters, some consideration should be given to the background concentration of metals.
文摘Al_(2)O_(3)-MgO and Al_(2)O_(3)-spinel low cement castables(LCC-AM and LCC-AS)have been extensively used in steel ladles as working linings.Nevertheless,the use of alumina-magnesia gunning mixes has been mainly kept for maintaining these castable linings,because of high rebound loss,poor green strength,high porosity and short life-span.Thanks to a high BET alumina(MC-G),it is now possible to develop a series of high-performance no-cement or low-cement Al_(2)O_(3)-MgO gunning mixes(NCG-AM or LCG-AM).The paper focuses on the BOF slag resistance of NCG-AM,LCG-AM,LCC-AM and LCC-AS.The corrosion mechanisms of rotary slag samples were studied by scanning electron microscopy(SEM/EDS).The results reveal different microstructures around MgO particles,depending on the four used compositions.Continuous and thicker spinel phases were formed in NCG-AM,which was proved to have the best corrosion resistance after the dynamic slag test.MC-G can provide a high diffusion flux of Al^(3+)in terms of kinetics and hence inhibits Kirkendall porosity around MgO particles.In addition,a continuous spinel phase acts like a pinning nail to reinforce the matrix and thus decreases erosion by slag.In contrast to NCG-AM,the porous spinel phase was found around unreacted MgO particles and some particles were carried away near the interface of LCC-AM and slag.The NCG-AM containing MC-G had been tested in two steel plants,and it extended the service life of the ladles up to 50%.In addition,this study suggests the potential application of NCG-AM as steel ladle linings.
文摘AIM: To determine whether normal genetically immunocompetent rodent hosts could be manipulated to accept human hepatocyte transplants with long term survival without immunosuppression. METHODS: Tolerance towards human hepatocytes was established by injection of primary human hepatocytes or Huh7 human hepatoma cells into the peritoneal cavities of fetal rats. Corresponding cells were subsequently transplanted into newborn rats via intrasplenic injection within 24h after birth. RESULTS: Mixed lymphocyte assays showed that spleen cells from non-tolerized rats were stimulated to proliferate when exposed to human hepatocytes, while cells from tolerized rats were not. Injections made between 15 d and 17 d of gestation produced optimal tolerization. Transplanted human hepatocytes in rat livers were visualized by immunohistochemical staining of human albumin. By dot blotting of genomic DNA in livers of tolerized rats 16 weeks after hepatocyte transplantation, it was found that approximately 2.5 X 10(5) human hepatocytes survived per rat liver. Human albumin mRNA was detected in rat livers by RT-PCR for 15 wk, and human albumin protein was also detectable in rat serum. CONCLUSION: Tolerization of an immuno-competent rat can permit transplantation, and survival of functional human hepatocytes.
