Better Initial Placement Algorithm for Large-Scale Mixed-Mode Detailed Placement

An algorithm is presented for better legal solution in detailed placement of large scale mixed macros and standard cells IC design.Due to the limitation of computing complexity,an effective and efficient initial placement is very important for detailed placement.Novelty of this algorithm lies in a better solution at initial stage by using network flow method to satisfy row capacity constraint and the thought of linear placement problem(LPP) to resolve overlaps.Moreover,divide and conquer strategy and other simplified methods are adopted to minimize complexity.Experimental results show that the algorithm can get an average of 16% wire length improvement on PAFLO in reasonable CPU time.

Application of a Current and Voltage Mixed Control Mode for the New Fast Control Power Supply at EAST

A feedback control system is needed to restrain plasma vertical displacement in EAST （Experimental Advanced Superconducting Toknmak）. A fast control power supply excites active feedback coils, which produces a magnetic field to control the plasma＇s displacement. With the development of EAST, new demands on the new fast control power supply have led to an enhanced ability of fast response and output current, as well as a new control mode. The structure of cascaded and paralleled H-bridges can meet the demand of extended capacity, and digital control can reMize current and voltage mixed control mode. The validity of the proposed scheme is confirmed by experiments.

MECHANISM ANALYSIS OF THICKNESS EFFECT ON MIXED MODE Ⅰ/Ⅱ FRACTURE OF LC4-CS ALUMINUM ALLOY

Mixed mode Ⅰ/Ⅱ fracture erperiments of LC4-CS aluminum alloy were conductedby using tension--shear specimens with thicknesses of 2, 4, 8 and 14mm. Fracturemechanisms of thickness effect on mixed mode Ⅰ/Ⅱ fracture were first examined fromfracture surface morphology to correlate with the macroscopic fracture behavior andstress state. It is found that specimen thickness has a strong influence on mixed modefracture. As thickness varies from thin to thick the macroscopic fracture surfacesappear the characteristics of plane stress state (2mm, 4mm--thick specimen), three--dimensional stress state (8mm--thick specimens), and plane strain state (14mm--thickspecimens), respectively. The specimens of all kinds of thicknesses are typical of ten-sile type failure under mode Ⅰ loading condition and shear type failure under mode Ⅱloading condition. Two distinct features coexist on the fracture surfaces under mixedmode loading conditions, and the corresponding proportion varies with loading mix-ity. Void--growth processes are the failure mechanism in both predominately tensile-and shears--type fractures. The size and depth of dimples on the fracture surface varygreatly with thickness. Therefore, it is extraordinary necessary to take into accountthe thickness effect when a mixed mode fracture criterion is being established.

A MIXED MODE FRACTURE CRITERION BASED ON THE MAXIMUM TANGENTIAL STRESS IN BRITTLE INCLUSION

A closed-form solution for predicting the tangential stress of an inclusion located in mixed mode Ⅰ and Ⅱ crack tip field was developed based on the Eshelby equivalent inclusion theory. Then a mixed mode fracture criterion, including the fracture direction and the critical load, was established based on the maximum tangential stress in the inclusion for brittle inclusioninduced fracture materials. The proposed fracture criterion is a function of the inclusion fracture stress, its size and volume fraction, as well as the elastic constants of the inclusion and the matrix material. The present criterion will reduce to the conventional one as the inclusion having the same elastic behavior as the matrix material. The proposed solutions are in good agreement with detailed finite element analysis and measurement.

Markov Chain Modelling of Reliability Analysis and Prediction under Mixed Mode Loading

The reliability assessment for an automobile crankshaft provides an important understanding in dealing with the design life of the component in order to eliminate or reduce the likelihood of failure and safety risks.The failures of the crankshafts are considered as a catastrophic failure that leads towards a severe failure of the engine block and its other connecting subcomponents.The reliability of an automotive crankshaft under mixed mode loading using the Markov Chain Model is studied.The Markov Chain is modelled by using a two-state condition to represent the bending and torsion loads that would occur on the crankshaft.The automotive crankshaft represents a good case study of a component under mixed mode loading due to the rotating bending and torsion stresses.An estimation of the Weibull shape parameter is used to obtain the probability density function,cumulative distribution function,hazard and reliability rate functions,the bathtub curve and the mean time to failure.The various properties of the shape parameter is used to model the failure characteristic through the bathtub curve is shown.Likewise,an understanding of the patterns posed by the hazard rate onto the component can be used to improve the design and increase the life cycle based on the reliability and dependability of the component.The proposed reliability assessment provides an accurate,efficient,fast and cost effective reliability analysis in contrast to costly and lengthy experimental techniques.

Elastic-viscoplastic field at mixed-mode interface crack-tip under compression and shear

For a compression-shear mixed mode interface crack, it is difficult to solve the stress and strain fields considering the material viscosity, the crack-tip singularity, the frictional effect, and the mixed loading level. In this paper, a mechanical model of the dynamic propagation interface crack for the compression-shear mixed mode is proposed using an elastic-viscoplastic constitutive model. The governing equations of propagation crack interface at the crack-tip are given. The numerical analysis is performed for the interface crack of the compression-shear mixed mode by introducing a displacement function and some boundary conditions. The distributed regularities of stress field of the interface crack-tip are discussed with several special parameters. The final results show that the viscosity effect and the frictional contact effect on the crack surface and the mixed-load parameter are important factors in studying the mixed mode interface crack- tip fields. These fields are controlled by the viscosity coefficient, the Mach number, and the singularity exponent.

Observation on the Application of“Online+Offline”Mixed Teaching Mode in Clinical Nursing Teaching

Objective:To observe the application effect of“online+offline”mixed teaching mode in clinical nursing teaching.Methods:A total of 72 clinical nursing workers,who work in PLA General Hospital and participated in the experiment from March 2019 to March 2021,were selected as the subjects of this study.According to the odd numbers assigned to the participants’names,the participants were divided into two groups:the experimental group and the control group,with 36 cases in each group.The experimental group received“online+offline”hybrid teaching,whereas the control group received traditional offline teaching.In order to evaluate the efficacy and safety of the two groups of nursing workers,their assessment scores,teaching satisfaction scores,and teaching evaluation indicators were observed.Results:The experimental group was significantly better than the control group in terms of assessment scores,teaching satisfaction scores,and teaching evaluation indicators(P<0.05).Conclusion:In clinical nursing teaching,the“online+offline”mixed teaching mode plays a unique role in improving students’scores and teaching quality;thus,it should be promoted.

MIXED MODE SCC OF 18-8 STAINLESS STEEL IN BOILING 42% MgCl_2 SOLUTION

A series of mixed mode tests were carried out on 18-8 stainless steel in boiling 42% MgCl_2 solution.The results show that for any K_Ⅱ/K_Ⅰ ratio,the SCC direction coin- cides well with the crack tip maximum normal stress plane,while the SCC resistance of the material reduces as the ratio of K_Ⅱ/K_Ⅰ increases.The experimental results were discussed in the light of anode dissolving mechanism and the effect of mixed mode loading on crack tip stress and strain.It is concluded that for fracture analysis if mixed mode cracks were simply taken into account as mode Ⅰ cracks,and only mode Ⅰ testing results as mode Ⅰ fracture criter- ion were employed,it may not be safe.

Computational Fracture Analysis of an AFM-Specimen under Mixed Mode Loading Conditions

Fracture processes in ship-building structures are in many cases of a 3-D character. A finite element （FE） model of an all fracture mode （AFM） specimen was built for the study of 3-D mixed mode crack fracture behavior including modes Ⅰ,Ⅱ, and Ⅲ. The stress intensity factors （SIFs） were calculated by the modified virtual crack closure integral （MVCCI） method, and the crack initiation angle assessment was based on a recently developed 3-D fracture criterion--the Richard criterion. It was shown that the FE model of the AFM-specimen is applicable for investigations under general mixed mode loading conditions, and the computational results of crack initiation angles are in agreement with some available experimental findings. Thus, the applicability of the FE model of the AFM-specimen for mixed mode loading conditions and the validity of the Richard criterion can be demonstrated.

(Ⅰ+Ⅱ)MIXED MODE HYDROGEN INDUCED CRACKING

Hydrogen induced cracking(HIC)of 0.3% C,1% Cr,1% Mn,1% Si high strength steel has been studied under simple mode Ⅰ,mode Ⅱ and(Ⅰ+Ⅱ)mixed mode loading conditions.Af- ter being hydrogen-charged in IN H_2SO_4 solution,the material behaved hydrogen embrittlement in all the cases studied.The threshold K_(ⅡH)/K_(ⅡX) of HIC under mode Ⅱ load- ing was 0.27,which was nearly the same as that K(ⅠH)/K_(ⅠX)=0.29 under mode Ⅰ loading. While the thresholds of-HIC under(Ⅰ+Ⅱ)mixed mode loading were 0.36,0.41 and 0.37 cor- responding to the K_Ⅱ/K_Ⅰ ratio of 0.27,0.4 and O.81.The results show that simple mode Ⅰ or mode Ⅱ loading is more susceptible to hydrogen embrittlement than(Ⅰ+Ⅱ)mixed mode. For explaining the experimental results,the effects of triaxial stress as well as plastic deformation ahead of crack tip has been discussed.

Research on Innovative Learning Based on Mixed Teaching Model of Data Structures

Under the premise of building an innovative country and cultivating innovative talents,teaching innovative learning,cultivating students’innovative thinking and improving the teaching mode and curriculum form have already become one of the main directions of deepening the reform of higher education.Data Structure is essential part in the undergraduate program.It is crucial for student to carry out research and project.In the actual teaching activities,the problems of content updating,practice ability for research projects of data structures are to be improved.Therefore,the course reform is imperative.This paper analyzed the main problems of the current data structures course,explored the solution of the problems,and proposed a new mixed teaching mode and evaluation method.

Experiment on Mode Ⅰ/Ⅱ Mixed Interfacial Fracture Characterization of Foam Core Sandwich Materials at Elevated Temperatures

Foam-cored sandwich materials have been widely used in the civil engineering due to their advantages such as lightweight,high strength,and excellent anti-corrosion ability. However,the interfacial bonding strength of foamcored sandwich materials is weakened at elevated temperatures. In practice,the effect of high temperature cannot be ignored,because the composites and foams are sensitive to the change of temperature in the environment. In this study,a series of single-leg bending beams were tested at different temperatures to evaluate the influences of high temperatures on Mode Ⅰ/Ⅱ mixed interfacial fracture of foam core sandwich materials. The temperature was from29 ℃ to 90 ℃,covered the glass transition temperature of composites and foam core,respectively. The Mode Ⅰ/Ⅱ mixed interfacial crack prorogation and its corresponding interfacial strain energy release rate were summarized.

A THEORETICAL MODEL OF MATRIX CRACKING IN COMPOSITE LAMINATES UNDER THERMOMECHANICAL LOADING

A theoretical approach is presented for analyzing the ply crackingin general symmetric lami- nates subjected to any combination ofin-plane mechanical loading and uniform temperature changes. Theequivalent constraint model proposed by the authors in a previouswork is used to account for the cracking in- teraction betweenlaminae in the laminates. By using a superposition schemce and thestress field solutions the energy release rate for a ply cracking isexplicitly as a function of stiffness reduction parameters of thelaminates. The ratio of mode Ⅰ to mode Ⅱ is introduced formconstruction of the fracture criterion. The effects of the laminateparameters and the crack spacing on the energy release rate and themode mixity are illustrated. Finally, the model is used to predictthe thermomechanical load for the first-ply-cracking.

Microscopic characteristics of different fracture modes of brittle rock

Three types of rock specimens, three-point bending specimen, anti-symmetric four-point bending specimen and direct shearing specimen, were used to achieve Mode I, Mode II and mixed mode I–II fracture, respectively. Microscopic characteristics of the three fracture modes of brittle rock were studied by SEM technique in order to analyze fracture behaviors and better understand fracture mechanisms of different fracture modes of brittle rock. Test results show that the microscopic characteristics of different fracture modes correspond to different fracture mechanisms. The surface of Mode I fracture has a great number of sparse and steep slip-steps with few tearing ridges and shows strong brittleness. In the surface of Mode II fracture there exist many tearing ridges and densely distributed parallel slip-steps and it is attributed to the action of shear stress. The co-action of tensile and shear stresses results in brittle cleavage planes mixed with streamline patterns and tearing ridges in the surface of mixed mode I–II fracture. The measured Mode II fracture toughness K II C and mixed mode I–II fracture toughness K mC are larger than Mode I fracture toughness K I C · K II C is about 3.5 times K I C, and KmC is about 1.2 times K I C.

IMPROVED COHESIVE ZONE MODEL AND ITS APPLICATION IN INTERFACE CONTACT ANALYSIS

An improved interface cohesive zone model is developed for the simulation of interface contact, under mixed-mode loading. A new debonding initiation criterion and propagation of debonding law, taking into account the pressure stress influence on contact shear strength, is proposed. The model is implemented in a finite-element program using subroutine VUINTER of ABAQUS Explicit. An edge-notch four-point bending process and laminated vibration damping steel sheet punch forming test are simulated with the improved model in ABAQUS Explicit. The numerical predictions agree satisfactorily with the corresponding experimental results.

Modelling and mechanical characteristics of PDC cutter-rock interaction by combining mixed fragmentation modes with dynamic rock strength

Polycrystalline diamond compact(PDC)bit is one of the most widely used drill bits for improving the rate of penetration in deep oil and gas well and geothermal well.However,the dynamic rock fragmentation mechanics characteristics of PDC bits are still unclearly.A coupled fragmentation mechanics model of PDC cutter-rock interaction is established by combining the mixed fragmentation modes with dynamic strength.The coupling influence laws of cutter angle,cutting depth,dynamic strength ratio,breaking modes on the horizontal force coefficient(HFC),vertical force coefficient(VFC)and specific energy are analyzed.The model of this paper can optimize cutter inclination angle,cutting depth and minimum specific energy.With the increase of the cutter inclination angle,the dynamic VFC changes into two modes.The definition of the dynamic modes depends on the dynamic strength ratio.As the cutting angle increases,the cutting force increases.The cutting force increases nonlinearly with increasing cutting depth.The specific energy of rock fragmentation increases nonlinearly with increasing cutting depth.With the increase of dynamic strength,the specific energy of rock fragmentation increases nonlinearly.When the input-energy increases,the rate of penetration response is divided into three stages.The results have important guiding significance for the PDC bit design and drilling parameters optimization to increase the rate of penetration and the efficiency of exploration and development.

An alternative 2D ICEEMDAN-based denoising method and its application in processing magnetic anomaly data

Due to environmental noise and human factors,magnetic data collected in the field often contain various noises and interferences that significantly affect the subsequent data processing and interpretation.Empirical Mode Decomposition(EMD),an adaptive multiscale analysis method for nonlinear and non-stationary signals,is widely used in geophysical and geodetic data processing.Compared with traditional EMD,Improved Complete Ensemble EMD with Adaptive Noise(ICEEMDAN)is more effective in addressing the problem of mode mixing.Based on the principles of 1D ICEEMDAN,this paper presents an alternative algorithm for 2D ICEEMDAN,extending its application to two-dimensional scenarios.The effectiveness of the proposed approach is demonstrated through synthetic signal experiments,which show that the 2D ICEEMDAN exhibits a weaker mode mixing effect compared to the traditional bidimensional EMD(BEMD)method.Furthermore,to improve the performance of the denoising method based on 2D ICEEMDAN and preserve useful signals in high-frequency components,an improved soft thresholding technique is introduced.Synthetic magnetic anomaly data testing indicates that our denoising method effectively preserves signal continuity and outperforms traditional soft thresholding methods.To validate the practical application of this improved threshold denoising method based on 2D ICEEMDAN,it is applied to ground magnetic survey data in the Yandun area of Xinjiang.The results demonstrate the effectiveness of the method in removing noise while retaining essential information from practical magnetic anomaly data.In particular,practical applications suggest that 2D ICEEMDAN can extract trend signals more accurately than the BEMD.In conclusion,as a potential tool for multi-scale decomposition,the 2D ICEEMDAN is versatile in processing and analyzing 2D geophysical and geodetic data.

Evaluation of stress intensity factors for bi-material interface cracks using displacement jump methods

The aim of the present work is to investigate the numerical modeling of interfacial cracks that may appear at the interface between two isotropic elastic materials. The extended finite element method is employed to analyze brittle and bi-material interfacial fatigue crack growth by computing the mixed mode stress intensity factors(SIF). Three different approaches are introduced to compute the SIFs. In the first one, mixed mode SIF is deduced from the computation of the contour integral as per the classical J-integral method,whereas a displacement method is used to evaluate the SIF by using either one or two displacement jumps located along the crack path in the second and third approaches. The displacement jump method is rather classical for mono-materials,but has to our knowledge not been used up to now for a bimaterial. Hence, use of displacement jump for characterizing bi-material cracks constitutes the main contribution of the present study. Several benchmark tests including parametric studies are performed to show the effectiveness of these computational methodologies for SIF considering static and fatigue problems of bi-material structures. It is found that results based on the displacement jump methods are in a very good agreement with those of exact solutions, such as for the J-integral method, but with a larger domain of applicability and a better numerical efficiency(less time consuming and less spurious boundary effect).

Mechanisms of hydraulic fracturing in cohesive soil

Hydraulic fracturing in the soil core of earth-rockfill dams is a common problem affecting the safety of the dams. Based on fracture tests, a new criterion for hydraulic fracturing in cohesive soil was suggested. Using this criterion, the mechanisms of hydraulic fracturing in cubic soil specimens were investigated. The results indicate that the propagation of the crack in a cubic specimen under water pressure occurs in a mixed mode I-II if the crack face is not perpendicular to any of the principal stresses, and the crack most likely to propagate is the one that is perpendicular to the minor principal stress and propagates in mode I.

Tensile and tear-type fracture toughness of gypsum material:Direct and indirect testing methods

In this context,four specimens,i.e.(i)circumferentially notched cylindrical torsion(CNCT),(ii)circum-ferentially notched cylindrical direct tension(CNCDT),(iii)edge notch disc bend(ENDB)and(iv)three-point bend beam(3PBB),were utilized to measure the modesⅠandⅢfracture toughness values of gypsum.While the CNCT specimen provides pure modeⅢloading in a direct manner,this pure mode condition is indirectly produced by the ENDB specimen.The ENDB specimen provided lower KⅢc and a non-coplanar(i.e.twisted)fracture surface compared with the CNCT specimen,which showed a planar modeⅢfracture surface.The ENDB specimen is also employed for conducting pure modeⅠ(with different crack depths)and mixed modeⅠ/Ⅲtests.KIc value was independent of the notch depth,and it was consistent with the RILEM and ASTM standard methods.But the modeⅢfracture results were highly sensitive to the notch depth.While the fracture resistance against modeⅢwas significantly lower than that of modeⅠ,the greater work of fracture under modeⅢwas noticeable.