SIMULTANEOUS DETERMINATION OF MULTICOMPONENT IN MIXED ACIDS BY MATHEMATICAL METHOD

A new method for the determination of components in mixed acids has been developed.The mathematical model is obtained from samples of known composition and is then used to predict the concentrations of components in unknown sample.The practical utility of this method is demonstrated for simultaneous determination of two systems of ternary mixed acids and the results are satisfactory.

Rapid Determination of Cd in Squilla by Mixed Acid Leaching-flame Atomic Absorption Method

[Objective] This study was conducted to find a method for rapid determi-nation of Cd in squil a. [Method] Cd in squil a was determined by mixed acid leach-ing-flame atomic absorption method by digesting samples with HNO3-HSO4 （5：1） and determining Cd in the samples by a flame atomic absorption spectrophotometer. [Results] The Cd contents in squil a were 1.0-2.0 mg/kg, and the recoveries of Cd were 86%-109%, and the relative standard deviations were 0-6%. [Conclusion] The method is simple and rapid with strong operability, good reproducibility and high ac-curacy.

Anodising of 2024-T3 aluminium alloy in electrolyte of sulphuric-boric-phosphoric mixed acid containing cerium salt as corrosion inhibitor

The effect of cerium salt as an inhibitor in anodising of the2024-T3aluminium alloy was studied.Scanning electronmicroscopy equipped with energy dispersive X-ray spectroscopy was used to study the surface composition of the alloy before andafter surface preparation.A mixed electrolyte of10%sulphuric acid,5%boric acid and2%phosphoric acid containing0.1mol/Lcerium sulphate salt was used as the anodising electrolyte.Sealing treatment was also done in boiling water and molten stearic acid.Electrochemical impedance spectroscopy and salt spray techniques were performed in order to investigate the corrosion behaviourand durability of the oxide films,respectively.It was concluded that the presence of cerium ions in anodising electrolyte resulted inthe increase in homogeneity,the rate of oxide film growth and also the thickness of the oxide layer,owing to the high oxidisingpower of cerium ion.

Microencapsulated essential oils combined with organic acids improves immune antioxidant capacity and intestinal barrier function as well as modulates the hindgut microbial community in piglets

Background:The objective of this experiment was to evaluate the effect of a combination of microencapsulated essential oils and organic acids(MOA)on growth performance,immuno-antioxidant status,intestinal barrier function and microbial structure of the hindgut in piglets.A total of 120 piglets(Duroc×[Landrace×Yorkshire];weighted 7.66±1.79 kg,weaned at d 28)were randomly selected and allocated to 3 treatments with 4 replicates per group and 10 piglets per replicate according to the initial body weight and gender.The dietary treatments were as follows:1)basal diet(Ctrl);2)Ctrl+chlortetracycline(75 mg/kg)(AGP);3)Ctrl+MOA(1500 mg/kg).The experiment period was lasted for 21 d.Results:Compared to the Ctrl group,dietary supplemented MOA alleviated(P<0.05)the diarrhea rate from d 12 to 21,enhanced(P<0.05)the concentration of serum interlukin-10 and glutathione peroxidase in piglets on d 11 after weaning and serum superoxide dismutase in 21-day piglets.The MOA group also improved(P<0.05)the apparent digestibility of dry matter(DM),organic matter(OM)and gross energy(GE),up-regulated(P<0.05)the mRNA expression level of occludin,claudin-1 and mucin-2 in ileum and increased(P<0.05)the contents of propionic and butyric acids in the cecum of piglets.The MOA group modulated the cecal and colonic microbial community structure and increased(P<0.05)the abundance of Faecalibacterium and Muribaculaceae in cecum and Streptococcus and Weissella in colon.Additionally,AGP group decreased(P<0.05)apparent digestibility of DM,OM and GE as well as down-regulated(P<0.05)relative gene expression level of claudin-1 in duodenum and jejunum,ZO-1 and mucin-1 in jejunum of piglets.Conclusion:In summary,dietary supplemented MOA alleviated diarrhea and improved nutrient apparent digestibility in piglets via enhancing immuno-antioxidant properties,increasing digestive enzyme activity,upregulating the expression of intestinal barrier-related genes,and modifying the microbial community structure of the cecum and colon.Therefore,dietary supplementation with MOA as an alternative to antibiotics was feasible to improve intestinal health of piglets in practical production.

Effects of Lactobacillus plantarum and fibrolytic enzyme on the fermentation quality and in vitro digestibility of total mixed rations silage including rape straw

The aim of the current study was to investigate the effects of a lactic acid bacteria inoculant（Lactobacillus plantarum, LP）, fibrolytic enzyme（EN）, combination of LP and EN（LP＋EN） on fermentation quality, nutritive characteristics and in vitro digestibility of total mixed ration（TMR） silages containing 0, 7.5 and 15.0%（on dry matter basis） of rape（Brassica campestris L.） straw（RS）（denoted as CTMR, LTMR and MTMR, respectively）. After ensiling for 60 days, TMR silages without additives were well preserved, but MTMR had higher p H than CTMR and LTMR. There were no differences in other parameters of fermentation quality, microbial composition, nutrition and in vitro digestibility between CTMR and LTMR except for yeast and mold number and crude protein（CP） content. CTMR and LTMR silage had higher CP content, in vitro neutral detergent fiber digestibility（IVNDFD） and in vitro acid detergent fiber digestibility（IVADFD）, lower acid detergent fiber（ADF） content than MTMR silage. LP and EN decreased p H and increased dry matter（DM） recovery of TMR silages. LP＋EN improved the fermentation quality, nutritive characteristics and in vitro digestibility of TMR silages, showed by lower p H, ADF content, higher lactic acid content, in vitro dry matter digestibility（IVDMD） and IVNDFD. Therefore, It was suggested that TMR silage contained 7.5% RS on a DM basis and treated with LP＋EN can be as a useful feed for ruminant.

Syntheses,Structures and Properties of Lanthanide Coordination Polymers Constructed from Mixed Acid

Two new coordination polymers,[Ln（oba）（ox）0.5（H2O）2]n（Ln = Ho（1）,Eu（2）;H2oba = 4,4？-oxybis（benzoic acid）,H2ox = oxalic acid） have been synthesized under hydrothermal conditions.According to single-crystal X-ray diffraction analyses,complex 1 crystallizes in the monoclinic system,space group P21/c with a = 13.783（2）,b =10.0120（15）,c = 12.1974（18） ,β = 105.217（2）°,V = 1624.2（4） 3,C15H12O9Ho,Mr = 501.18,Z = 4,Dc = 2.050 g/cm3,F（000） = 964,μ = 4.919 mm-1,λ（MoKα） = 0.71073 ？,GOOF = 1.124,the final R = 0.0239 and wR = 0.0570 for 3310 independent reflections with Rint = 0.0298.Complexes 2 and 1 are isostructural.Oba and ox ligands bridge the Ln（III） ions into 2D layers with（4,4） topology,which are further interlinked into a 3D supramolecular network by hydrogen bonds.TG curves of the two complexes are studied to examine their thermal stabilities.Additionally,complex 2 shows red fluorescence in the solid state at room temperature.

Rapid determination of wastewater COD using Mn（H2PO4）2 as catalyst

A new rapid determination method of wastewater COD in mixed acid solution H_2SO_4-H_3PO_4,with Mn(H_2PO_4)_2 as catalyst,has been proposed in this paper. Through orthogonal experiment, the optimal test conditions have been determined: Mn(H_2PO_4)_2:0. 3g,H_2SO_4:H_3PO_4=6:1(V/V),reflux time:5 minutes. The results were similar to that of the standard method, but the test time was only 1/24 of that and the test cost decreased 85%.

Efficient recovery of tungsten from scheelite concentrates using a sulfur-phosphorus mixed acid leaching system

In recent years,a new process for leaching scheelite concentrates with sulfur-phosphorus mixed acid has been successfully industrialized.This process suffers from the elimination of the retarding effect of calcium sulfate,the selective extraction of tungsten from the H_(3)PW_(12)O_(40)-H_(2)SO_(4)-H_(3)PO_(4)mixture solution,and the removal of introduced phosphorus.Therefore,in this paper,we investigated the inhibition measures of a calcium sulfate-blocking membrane,the selective extraction of tungsten by ion exchange,and the removal of phosphorus by the magnesium ammonium salt method.The results showed that the addition of calcium sulfate whisker seeds and a higher H_(3)PO_(4)concentration inhibited spontaneous diffuse nucleation,promoted crystal growth,and avoided the formation of a dense blocking film.About 98 wt.%of the scheelite concentrate was digested by H_(2)SO_(4)-H_(3)PO_(4).The selective adsorption of PW_(12)O_(40)^(3-)was realized using D301 resin,and the extraction efficiency of tungsten exceeded 99.9%.After desorption with ammonia water,PW_(12)O_(40)^(3-)was depolymerized into WO_(4)^(2-)and PO_(4)^(3-).99.9 wt.%of phosphorus was removed in the form of MgNH_(4)PO_(4)by the magnesium ammonium salt method,and the residual phosphorus concentration in the solution was lower than 10 mg·L^(-1).After purification,the highest-grade ammonium paratungstate product was prepared by evaporative crystallization.

A mixed acid methodology to produce thermally stable cellulose nanocrystal at high yield using phosphoric acid

Cellulose nanocrystal(CNC)with distinctive shape-morphology,enhanced thermal stability and dispersibility is essential for overcoming the challenges in processing polymer/CNC nanocom-posites through melt compounding at elevated temperatures.This study shows a mixed acid hy-drolysis method to produce CNC with improved thermal stability and high productivity.The use of phosphoric acid(H_(3)PO_(4)),as a mild acid,in combination with a strong acid either sulphuric acid(H_(2)SO_(4))or hydrochloric acid(HCl)leads to reduced use of strong acids and low impact on our environment.The influences of acid combination and sequence of addition on the production yield were investigated by retaining the proportion of H_(3)PO_(4)to corrosive acid(H_(2)SO_(4)and HCl)4 to 1,and solid to liquid ratio 1꞉75.This methodology has enabled to isolate CNC with higher thermal stability,dispersibility and productivity in terms of amount acid used 1 g of CNC,as compared with single acid hydrolysis.The CNC produced using the combination of H_(3)PO_(4)and HCl exhibits high thermal stability,dispersibility and rod-like shape morphology with length and width of(424±86)and(22±3)nm,respectively.Moreover,this approach has reduced H_(3)PO_(4)consumption by 54%as compared with single acid hydrolysis method for the production of same amount of CNC.