A Mixed Host Emitting Interlayer Based on CBP:TPBi in Green Phosphorescent Organic Light-Emitting Diodes

A series of green phosphorescent organic light-emitting diodes based on bipolar-transporting material 4,4Lbis- （carbazol-9-yl） biphenyl （CBP） are prepared. We insert a mixed host emitting interlayer （CBPx： electron- transporting material 1,3,＆tris （N-phenylbenzimidazole-2yl） （TPBi）1-X） in the middle of the emitting layer, and the best performance appears when x is 2/3. The position of this interlayer can also affect the performanee of phosphorescent organic light-emitting diodes. When this interlayer is close to the side of the electron transporting layer, the maximum value of luminance, the current efficiency and the power efficiency are 34090cd/m2 at 12 V, 60. 6 cd/A and 56.6 lm/W, respectively.

Translocation and distribution of mercury in biomasses from subtropical forest ecosystems:evidence from stable mercury isotopes

To understand its source,distribution,storage,and translocation in the subtropical forest ecosystems,mercury(Hg)concentrations and stable isotopes in forest biomass tissues(foliage,branch,bark,and trunk)were investigated at Ailao Mountain National Nature Reserve,Southwest China.The total Hg(THg)concentrations in the samples show the following trend:mature foliage(57±19 ng g-1)>bark(11±4.0 ng g-1)>branch(5.4±2.5 ng g-1)>trunk(1.6±0.7 ng g-1).Using the measured THg concentrations and the quantity of respective biomasses,the Hg pools in the forest are:wood(60±26μg m-2)>bark(51±18μg m-2)>foliage(41±11μg m-2)>branch(26±8.3μg m-2).The tree biomasses displayed negativeδ202Hg(-1.83‰to-3.84‰)andΔ199Hg(-0.18‰to-0.62‰).The observedΔ200Hg(-0.08‰to 0.04‰)is not significantly from zero.AΔ199Hg/Δ201Hg ratio of 1.05 was found in tree biomasses,suggesting that mercury has undergone Hg(Ⅱ)photoreduction processes.A Hg-isotope based binary mixing model suggests that Hg in the tree biomasses mainly originated from foliage uptake of atmospheric Hg0,constituting 67%,80%,and 77%of Hg in wood,branch,and bark,respectively.Our study sheds new light on the transportation and sources of Hg in the subtropical forest ecosystems.

Effect of Rice Bran Quality and Protein Supplement, Base Mix, and/or Soybean Meal on Growing Pig Performance in Cambodia

The objective of this study was to evaluate the effect of rice bran quality and dietary supplement source on growing pig performance. A total of 60 castrated male pigs (Yorkshire × Duroc, initially 16.1 kg) were used for 52-day trial. Pigs were allotted to pens in a completely randomized design (4 pigs per pen) and assigned to four dietary treatments in a 2 × 2 factorial with factors being rice bran source (high or low-quality) and source of protein, vitamins, and minerals (supplement or soybean meal and base mix). Analyzed protein and fat level for the high- and low-quality rice bran was 11.07% and 5.86% and 11.20% and 4.50%, respectively. Crude fiber content for high- and low-quality rice bran was 13.44% and 27.79%. Diets were formulated in two phases (phase 1: 16 to 27 and phase 2: 27 to 48 kg) to adjust to the pig’s nutrient requirements. There was no evidence for an interaction (P > 0.05) between rice bran quality × supplement type or main effect of supplement type (soybean meal + base mix vs protein supplement) for final body weight, average daily gain (ADG), average daily feed intake (ADFI), and feed efficiency (F/G). However, pigs fed high-quality rice bran had improved (P < 0.001) ADG and F/G and lower ADFI compared to pigs fed low protein rice bran. In conclusion, rice bran quality as measured by protein, crude fiber, and fat influenced growing pig performance, while the type of dietary protein supplement did not. Additionally, rice bran with high protein, fat, and low fiber improved ADG and F/G.

Effect of Dietary Supplement, Base Mix, and/or Soybean Meal on Growing Pig Performance

A total of 60 crossbred pigs (Yorkshire × Duroc, initially 56.5 kg) were used in a 42-day trial to evaluate the effect of replacing a commercial high protein supplement with soybean meal and/or a base mix in rice bran-based diets on pig growth performance. Pigs were allotted to pens by body weight and pens were randomly assigned to dietary treatments in completely randomized design. There were 4 dietary treatments with 3 or 4 replicate pens per treatment and 4 pigs per pen. Dietary treatments were: 1) 80% rice bran with 20% high protein supplement (RBS20), 2) 95% rice bran with 5% high protein supplement (RBS5), 3) 97.5% rice bran with 2.5% base mix (RBB2.5), and 4) 92.5% rice bran with 5% soybean meal and 2.5% base mix (RBSBB). The base mix included vitamins, macro and trace minerals, L-Lysine, L-Threonine, and DL-Methionine. Overall (d 0 to 42) average daily gain was greater (P < 0.001) for pigs fed RBSBB and RBS20 diets than pigs fed the RBS5 or RBB2.5 diets. Pigs fed the RBS5 diet had reduced (P < 0.004) average daily feed intake compared to all other treatments. Similarly, feed efficiency (feed/gain) was improved (P < 0.004) for pigs fed RBSBB and RBS20 diets compared with pigs fed RBS5 or RBB2.5. For economics, income over feed cost was the greatest (P < 0.01) for the diet containing soybean meal and base mix compared to pigs fed the RBS20 diet, SBS5, and RBB2.5. In conclusion, feeding pigs a rice bran diet with base mix and soybean meal had similar growth performance and increased economic return compared to feeding a rice bran diet with high protein supplement. Use of soybean meal and base mix provides an opportunity for increased economic return for pig farmers.

Effect of SiO2 Micropowder Addition on Properties of Alumina-magnesia Based Wet Gunning Mix for Working Layer

The magnesia - alumina based wet gunning mix was prepared using tabular corundum aggregates,fused mag- nesia aggregates, tabular corundum micropowder, silica mieropowder and pure calcium ahuninate cement as the main starting materials. Effects of silica micropowder ad- ditions （0, 0. 2% , 0. 5% , 1.0% , 1.5% , 2. 0% , and 2.5%, by mass, the same hewinafier） on properties oJ the gunning mix were researched. The results show that when ttze silica micropowder addition is i. 0% -2. 0% , the gunning mix has good .flou,ability and pumpability. Adding 2.5% silica micropowder, the nepheline forms at 1 600 ℃, which will reduce the high. temperature proper- ties of ntagnesia -ahtmina wet gunning mix. The intro- duction qf silica micropowder has obvious effects on cold mechanical properties of the gunning mix. For the speci- tnens dried at 110 ℃ , the strength increases slightly with the silica micropowder addition increasing. For the specimens heat-treated at 1 600 ℃ for 3 h, the strength in- creases nutrkedlv with the silica micropowder addition in- creasing. When keeping the water addition and particle size di, stribution constant, the residual linear expansion rate qf the specimen with 1.5% of silica micropowder is the lowest, ltot modulus tf rupture at 1 450 ℃ .for 0. 5 h oJ the specimens decreases gradually with the increase of silica fame addition. A small amount of silica micropow- der is beneficial for the slag penetration resistance.

Enhanced thermal stability of Ce_(0.33)Zr_(0.55)(LaNdY)_(0.12)O_(2) mixed oxides prepared by sulfate-aided coprecipitation method

Ceria-zirconia based mixed oxides(CZs)have been applied in three-way catalysts(TWCs)for their high surface area and oxygen storage capacity(OSC).In this work,enhanced thermal stability of Ce_(0.33)Zr_(0.55)(LaNdY)_(0.12)O_(2)mixed oxides was realized via a facile and scalable approach,namely,sulfateaided coprecipitation method was labelled as CZ-S.Sulfate ion(SO_(4)^(2-))was added into raw solution in the form of sulfuric acid and acted as coordination agent.The control sample was prepared by conventional coprecipitation method without sulfuric acid added and labelled as CZ.The promotion effect of sulfate ion was analyzed systematically by X-ray diffraction(XRD),transmission electron microscopy(TEM),scanning electron microscopy(SEM),N_(2)adsorption-desorption,Fourier transform infrared spectroscopy(FT-IR),X-ray photoelectron spectroscopy(XPS),OSC and hydrogen temperatureprogrammed reduction(H_(2)-TPR)analysis.XRD and high resolution TEM results reveal that CZ-S have homogeneous distributions of elements.TEM and SEM images show that fresh samples of CZ-S have narrower distributions of grain sizes and larger pore sizes than those of CZ.Through cross analysis of structure and morphology of CZ and CZ-S,we find that the introduction of sulfate ions results in uniform distributions of elements,narrows distributions of grain sizes,and enables the formation of secondary loose packing of sub-particles,which lead to enhanced thermal stability of the samples of CZ-S upon aging process at high temperature.After aging treatment at 1100℃for 10 h,aged samples of CZ-S present larger specific surface areas and pore volumes than the aged sample prepared by conventional coprecipitation method without sulfate ions added.Furthermore,the aged sample of CZ-S2(SO_(4)^(2-)/Zr=1)possesses the highest specific surface area of 21.9 m2/g and the biggest pore volume of 0.035 mL/g among all aged samples.

Effect of hydration on the surface basicity and catalytic activity of Mg-rare earth mixed oxides for aldol condensation

Magnesium and rare earth mixed oxides（Mg3 REOx（RE=La, Y. Ce）） were prepared and characterized by Xray diffraction（XRD）, N_2 adsorption-desorption, infrared spectra and microcalorimetry of CO_2. The results reveal that the Mg_3 CeO_x catalyst is present in the form of Mg-Ce-O solid solution,while the Mg3 LaOx and Mg_3 YO_x catalysts are probably rare earth oxides dispersed on MgO surface. As a result, among the calcined Mg_3 REO_x catalysts, the Mg_3 CeO_x catalyst presents the highest rate constant for acetone aldolization, which is well correlated to its more homogeneous distribution of basic sites. In contrary, the Mg_3 YO_x catalyst exhibit the lowest catalytic activity for acetone aldolization. Upon hydration pre-treatment, the basic properties on the surface of the Mg_3 REO_x catalysts were changed markedly. The Mg_3 YO_x catalyst after hydration treatment shows the highest amount of basic sites on catalyst surface, and then exhibits the highest activity among the hydrated Mg_3 REO_x catalysts. These results make it possible to fine-tune basic sites for acetone aldolization.

Multicolored sideband generation based on cascaded four-wave mixing with the assistance of spectral broadening in multiple thin plates

The generation of multicolored sidebands with the spectrum from 377 to 970 nm in a 0.5-mm-thick N-WG280 Schott glass based on a cascaded four-wave mixing(CFWM) process is demonstrated. The experimental setup is compact and economical. A pulse with a broadened spectrum from 670 to 900 nm is generated by utilizing two 0.18-mm-thick fused silica glass plates and is used to provide two input beams for the CFWM process.The new frequency components generated from the self-phase modulation effect in the two thin glass plates contribute to the broadening of the total spectral range of the generated multicolored sidebands.

Performance Optimization of Dispersion-Managed WDM Systems Based on Four-Wave Mixing

We systemically investigate the interchannel four-wave mixing (FWM) in dispersion-managed WDM systems with arbitrary launch position. We optimize the number of fiber sections, and the dispersion ratio for the system performance.