The effect of dopant valence on oxygen desorption and oxygen permeability of SrCo0.4Fe0.5M0.1O3-δ （M = Ni, Al and Zr） mixed-conducting oxides were investigated in detail by O2-TPD and oxygen permeation measurement....The effect of dopant valence on oxygen desorption and oxygen permeability of SrCo0.4Fe0.5M0.1O3-δ （M = Ni, Al and Zr） mixed-conducting oxides were investigated in detail by O2-TPD and oxygen permeation measurement. The SrCo0.4Fe0.5M0.1O3-δ for M = Fe, Ni, Al and Zr were denoted as SCF, SCFN, SCFA and SCFZ, respectively. O2-TPD analysis revealed that the amount of α oxygen desorption decreased with increasing the valance of doped metal elements （SCFN 〉 SCFA SCF 〉 SCFZ）. The oxygen permeation flux at the temperature ≈igher than 1148 K decreased in the order of SCFN 〉 SCF 〉 SCFZ 〉 SCFA. Single activation for oxygen permeation was observed for SCFZ oxide and the activation energies of SCF and SCFA change at around 1073 K, while the change temoerature of SCFN was about 1173 K.展开更多
Industry decarbonization requires the development of highly efficient and flexible technologies relying on renewable energy resources,especially biomass and solar/wind electricity.In the case of pure oxygen production...Industry decarbonization requires the development of highly efficient and flexible technologies relying on renewable energy resources,especially biomass and solar/wind electricity.In the case of pure oxygen production,oxygen transport membranes(OTMs)appear as an alternative technology for the cryogenic distillation of air,the industrially-established process of producing oxygen.Moreover,OTMs could provide oxygen from different sources(air,water,CO_(2),etc.),and they are more flexible in adapting to current processes,producing oxygen at 700^(-1)000℃.Furthermore,OTMs can be integrated into catalytic membrane reactors,providing new pathways for different processes.The first part of this study was focused on electrification on a traditional OTM material(Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3-δ)),imposing different electric currents/voltages along a capillary membrane.Thanks to the emerging Joule effect,the membrane-surface temperature and the associated O_(2) permeation flux could be adjusted.Here,the OTM is electrically and locally heated and reaches 900℃on the surface,whereas the surrounding of the membrane was maintained at 650℃.The O_(2)permeation flux reached for the electrified membranes was~3.7 NmL min^(-1)cm^(-2),corresponding to the flux obtained with an OTM non-electrified at 900℃.The influence of depositing a porous Ce_(0.8)Tb_(0.2)O_(2-δ) catalytic/protective layer on the outer membrane surface revealed that lower surface temperatures(830℃)were detected at the same imposed electric power.Finally,the electrification concept was demonstrated in a catalytic membrane reactor(CMR)where the oxidative dehydrogenation of ethane(ODHE)was carried out.ODHE reaction is very sensitive to temperature,and here,we demonstrate an improvement of the ethylene yield by reaching moderate temperatures in the reaction chamber while the O_(2) injection into the reaction can be easily fine-tuned.展开更多
Ionic, electronic and mixed (ionic-electronic) conductivities of blends of poly(2-vinyl pyridine) (P2VP) and poly(ethylene oxide) (PEO) with high molecular weight after doped with LiClO4, TCNQ or LiClO4 and TCNQ were ...Ionic, electronic and mixed (ionic-electronic) conductivities of blends of poly(2-vinyl pyridine) (P2VP) and poly(ethylene oxide) (PEO) with high molecular weight after doped with LiClO4, TCNQ or LiClO4 and TCNQ were investigated. Effects of LiClO4 and TCNQ concentrations on the conductivity of PEO/P2VP/LiClO4 or TCNQ blend were studied. The ionic conductivity of PEO/P2VP/LiClO4 blend increases with increasing PEO content. At a Li/ethylene bride molar ratio of 0.10 and a TCNQ/2-vinyl pyridine molar ratio of 0.5, the mixed conductivity of PEO/P2VP/LiClO4/TCNQ is higher than the total of ionic conductivity of PEO/P2VP/LiClO4 and electronic conductivity of PEO/P2VP/TCNQ when the weight ratio of PEO and P2VP is 6/4 or 5/5. Scanning electron microscopy (SEM) on the broken cross-section of the PEO/P2VP/LiClO4 blend and differential scanning calorimetry (DSC) results show that LiClO4 could act as a compatibilizer in the blend.展开更多
Mixed-conducting oxygen permeable membranes represent a class of novel ceramic membranes, which exhibit mixed oxygen ionic and electronic conductivities. At high temperatures, oxygen can permeate through the membrane ...Mixed-conducting oxygen permeable membranes represent a class of novel ceramic membranes, which exhibit mixed oxygen ionic and electronic conductivities. At high temperatures, oxygen can permeate through the membrane from the high to low oxygen pressure side under an oxygen concentration gradient. Theoretically, the permselectivity of oxygen is 100%. Recently, anovel mixed-conducting membrane-Ba0.5Sr0.5Coo.8Feo.2O3-δ has been developed, which showsextremely high oxygen permeability and promising stability. Furthermore, the reactor made with such membranes was successfully applied to the partial oxidation of methane to syngas reaction using air as the oxygen source, which realized the coupling of the separation of oxygen from air and the partial oxidation of membrane reaction in one process. At 850℃, methane conversion 】 88%, CO selectivity 】97% and oxygen permeation rate of about 7.8 mL/(cm2 ·min) were obtained.展开更多
基金This work is sponsored by the National Basic Research Program of China （No. 2003CB615702）；National Natural Science Foundation of China （No. 20576051, 20636020）；Special Research Foundation for Doctoral Discipline of Higher Education （No. 20060291003）.
文摘The effect of dopant valence on oxygen desorption and oxygen permeability of SrCo0.4Fe0.5M0.1O3-δ （M = Ni, Al and Zr） mixed-conducting oxides were investigated in detail by O2-TPD and oxygen permeation measurement. The SrCo0.4Fe0.5M0.1O3-δ for M = Fe, Ni, Al and Zr were denoted as SCF, SCFN, SCFA and SCFZ, respectively. O2-TPD analysis revealed that the amount of α oxygen desorption decreased with increasing the valance of doped metal elements （SCFN 〉 SCFA SCF 〉 SCFZ）. The oxygen permeation flux at the temperature ≈igher than 1148 K decreased in the order of SCFN 〉 SCF 〉 SCFZ 〉 SCFA. Single activation for oxygen permeation was observed for SCFZ oxide and the activation energies of SCF and SCFA change at around 1073 K, while the change temoerature of SCFN was about 1173 K.
基金Financial support by the Spanish Ministry of Science(PID2022139663OB-I00 and CEX2021-001230-S grant funded by MCIN/AE I/10.13039/501100011033)with funding from Next Generation EU(PRTR-C17.I1)within the Planes Complementarios con CCAA(Area of Green Hydrogen and Energy)+2 种基金carried out in the CSIC Interdisciplinary Thematic Platform(PTI+)Transición Energética Sostenible+(PTI-TRANSENER+)the Universitat Politècnica de València(UPV)the support of the Servicio de Microscopía Elcectronica of the UPV。
文摘Industry decarbonization requires the development of highly efficient and flexible technologies relying on renewable energy resources,especially biomass and solar/wind electricity.In the case of pure oxygen production,oxygen transport membranes(OTMs)appear as an alternative technology for the cryogenic distillation of air,the industrially-established process of producing oxygen.Moreover,OTMs could provide oxygen from different sources(air,water,CO_(2),etc.),and they are more flexible in adapting to current processes,producing oxygen at 700^(-1)000℃.Furthermore,OTMs can be integrated into catalytic membrane reactors,providing new pathways for different processes.The first part of this study was focused on electrification on a traditional OTM material(Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3-δ)),imposing different electric currents/voltages along a capillary membrane.Thanks to the emerging Joule effect,the membrane-surface temperature and the associated O_(2) permeation flux could be adjusted.Here,the OTM is electrically and locally heated and reaches 900℃on the surface,whereas the surrounding of the membrane was maintained at 650℃.The O_(2)permeation flux reached for the electrified membranes was~3.7 NmL min^(-1)cm^(-2),corresponding to the flux obtained with an OTM non-electrified at 900℃.The influence of depositing a porous Ce_(0.8)Tb_(0.2)O_(2-δ) catalytic/protective layer on the outer membrane surface revealed that lower surface temperatures(830℃)were detected at the same imposed electric power.Finally,the electrification concept was demonstrated in a catalytic membrane reactor(CMR)where the oxidative dehydrogenation of ethane(ODHE)was carried out.ODHE reaction is very sensitive to temperature,and here,we demonstrate an improvement of the ethylene yield by reaching moderate temperatures in the reaction chamber while the O_(2) injection into the reaction can be easily fine-tuned.
基金Project supported by the National Natural Science Foundation of China.
文摘Ionic, electronic and mixed (ionic-electronic) conductivities of blends of poly(2-vinyl pyridine) (P2VP) and poly(ethylene oxide) (PEO) with high molecular weight after doped with LiClO4, TCNQ or LiClO4 and TCNQ were investigated. Effects of LiClO4 and TCNQ concentrations on the conductivity of PEO/P2VP/LiClO4 or TCNQ blend were studied. The ionic conductivity of PEO/P2VP/LiClO4 blend increases with increasing PEO content. At a Li/ethylene bride molar ratio of 0.10 and a TCNQ/2-vinyl pyridine molar ratio of 0.5, the mixed conductivity of PEO/P2VP/LiClO4/TCNQ is higher than the total of ionic conductivity of PEO/P2VP/LiClO4 and electronic conductivity of PEO/P2VP/TCNQ when the weight ratio of PEO and P2VP is 6/4 or 5/5. Scanning electron microscopy (SEM) on the broken cross-section of the PEO/P2VP/LiClO4 blend and differential scanning calorimetry (DSC) results show that LiClO4 could act as a compatibilizer in the blend.
文摘Mixed-conducting oxygen permeable membranes represent a class of novel ceramic membranes, which exhibit mixed oxygen ionic and electronic conductivities. At high temperatures, oxygen can permeate through the membrane from the high to low oxygen pressure side under an oxygen concentration gradient. Theoretically, the permselectivity of oxygen is 100%. Recently, anovel mixed-conducting membrane-Ba0.5Sr0.5Coo.8Feo.2O3-δ has been developed, which showsextremely high oxygen permeability and promising stability. Furthermore, the reactor made with such membranes was successfully applied to the partial oxidation of methane to syngas reaction using air as the oxygen source, which realized the coupling of the separation of oxygen from air and the partial oxidation of membrane reaction in one process. At 850℃, methane conversion 】 88%, CO selectivity 】97% and oxygen permeation rate of about 7.8 mL/(cm2 ·min) were obtained.
