Experimental Study on Ammonia Co-Firing with Coal for Carbon Reduction in the Boiler of a 300-MW Coal-Fired Power Station

To reduce CO_(2) emissions from coal-fired power plants,the development of low-carbon or carbon-free fuel combustion technologies has become urgent.As a new zero-carbon fuel,ammonia(NH_(3))can be used to address the storage and transportation issues of hydrogen energy.Since it is not feasible to completely replace coal with ammonia in the short term,the development of ammonia-coal co-combustion technology at the current stage is a fast and feasible approach to reduce CO_(2) emissions from coal-fired power plants.This study focuses on modifying the boiler and installing two layers of eight pure-ammonia burners in a 300-MW coal-fired power plant to achieve ammonia-coal co-combustion at proportions ranging from 20%to 10%(by heat ratio)at loads of 180-to 300-MW,respectively.The results show that,during ammonia-coal co-combustion in a 300-MW coal-fired power plant,there was a more significant change in NO_(x) emissions at the furnace outlet compared with that under pure-coal combustion as the boiler oxygen levels varied.Moreover,ammonia burners located in the middle part of the main combustion zone exhibited a better high-temperature reduction performance than those located in the upper part of the main combustion zone.Under all ammonia co-combustion conditions,the NH_(3) concentration at the furnace outlet remained below 1 parts per million(ppm).Compared with that under pure-coal conditions,the thermal efficiency of the boiler slightly decreased(by 0.12%-0.38%)under different loads when ammonia co-combustion reached 15 t·h^(-1).Ammonia co-combustion in coal-fired power plants is a potentially feasible technology route for carbon reduction.

Study on Direct Reduction Characteristics of Iron Ore Coal Mixed Pellets

In order to get DRI iron ore coal mixed pellets are reduced isothermally. The mechanisms of reduction desulphurization, iron oxide reduction and the structure regenesis of the coal mixed pellets during reduction have been studied. The effect of various processing factors on the quality of DRI and economy technological indices including compression strength, desulphurization rate, recovery rate, reaction fraction, carbon content and metallization are also researched.

Study on the Evaporation Kinetics of Zinc and Lead in Zn-Pb-Bearing Dust Pellets Mixed with Coal Powder

The study on the evaporation kinetics of zinc and lead in the pellets made of ZnPbbearing dust mixed with carbon ,in nitrogen atmosphere at the temperature range between 1 100 and 1 300 , shows that the reduction temperature has a significant effect on the evaporation rates of zinc and lead and that both the particle size of coal powder and the extra carbon content have no effect on the evaporation rates . The obtained activation energies for the evaporation of zinc and lead are 7942 kJ/mol and 8874kJ/mol respectively. The evaporation rate of zinc is controlled by the reaction between zinc oxide and CO while that of lead is controlled by lead volatilization and the diffusion of gaseous lead through gas boundary layer covering the surface of liquid lead.

A study on mixed coal simulation soft layer of gas adsorption

Based on the single coal adsorption gas, hard coal and soft coal of intake airway in Shanxi Heshun Tianchi Coal Mine were chosen to simulate the soft coal seams in coalbed as those in different qualities are mixed with delamination. Experiments on characteristics of adsorption gas of hard coal and soft coal in different quality ratios were done according to the Langmuir single molecule layer absorption theory. Gas constant mensuration instrument WY-98B was used during the experiments. Isothermal adsorption curves, adsorption constants a and b of the mixed coal samples in different quality ratios were established for qualitative and quantitative analysis. The relationship curves of adsorption quantity with changing pressure and variation equation of adsorption constants a, b with changing thickness ratio shows that the thickness of soft layer and hard coal approximately equal, thus resulting in outburst at greatest risk, then a theoretical base for the mechanism of coal and gas outburst has been put forward and a technical support scheme for engineering control of gas outburst is laid out.

Guidance method to use mixed coal in blending for coking

Based on the principle that the adaptation can be reflected by the overlap of reflectance distribution peaks,the effect of various types mixed coal for coking is analyzed.Based on the action of the vitrinite of different reflectance range and the adaptation,a new method for guidance blending coal is established.Through simulation,blending coal using the software of HD automatic microscope photometer,makes the synthetic blending coal reflectance distribution map to nothing notch wide single peak flat-shaped symmetrical distribution,blending coal random reflectance meets 1.1 - 1.2,the standard deviation meets 0.35 - 0.4.It is based on the conditions that active component in the blending is excessive.Using this method,the mixed coal can be used as much as possible and play a positive role.The problem about implementation process is discussed.