An intelligent control method based on artificial neural network for numerical flight simulation of the basic finner projectile with pitching maneuver

In this paper,an intelligent control method applying on numerical virtual flight is proposed.The proposed algorithm is verified and evaluated by combining with the case of the basic finner projectile model and shows a good application prospect.Firstly,a numerical virtual flight simulation model based on overlapping dynamic mesh technology is constructed.In order to verify the accuracy of the dynamic grid technology and the calculation of unsteady flow,a numerical simulation of the basic finner projectile without control is carried out.The simulation results are in good agreement with the experiment data which shows that the algorithm used in this paper can also be used in the design and evaluation of the intelligent controller in the numerical virtual flight simulation.Secondly,combined with the real-time control requirements of aerodynamic,attitude and displacement parameters of the projectile during the flight process,the numerical simulations of the basic finner projectile’s pitch channel are carried out under the traditional PID(Proportional-Integral-Derivative)control strategy and the intelligent PID control strategy respectively.The intelligent PID controller based on BP(Back Propagation)neural network can realize online learning and self-optimization of control parameters according to the acquired real-time flight parameters.Compared with the traditional PID controller,the concerned control variable overshoot,rise time,transition time and steady state error and other performance indicators have been greatly improved,and the higher the learning efficiency or the inertia coefficient,the faster the system,the larger the overshoot,and the smaller the stability error.The intelligent control method applying on numerical virtual flight is capable of solving the complicated unsteady motion and flow with the intelligent PID control strategy and has a strong promotion to engineering application.

KEY TECHNOLOGY IN INTELLIGENT CONTROL FOR SHEET METAL DEEP DRAWING

Intellectualization of sheet metal in deep drawing is a new combined technology, which is concerned with control science and computer science and sheet metal forming theory. The intelligent control system for sheet metal deep drawing consists of four fundamental factors: real time measurement, identification, prediction and control. Real time identification of material properties and friction coefficient is the most important factor in the whole system. An artificial neural network model for identification of the material properties and friction coefficient was established according to deep drawing characteristics and more automation. The identification of the material properties and friction coefficient was realized.

High Precision Motion Control of Hybrid Five-Bar Mechanism with an Intelligent Control

Hybrid mechanism is a new type of planar controllable mechanism. Position control accuracy of system determines the output accuracy of the mechanism. In order to achieve the desired high accuracy,nonlinear factors as friction must be accurately compensated in the real-time servo control algorithm. In this paper,the model of a hybrid five-bar mechanism is introduced. In terms of the characteristics of the hybrid mechanism,a hybrid intelligent control algorithm based on proportional-integral-derivative (PID) control and cerebellar model articulation control techniques was presented and used to perform control of hybrid five-bar mechanism for the first time. The simulation results show that the hybrid control method can improve the control effect remarkably,compared with the traditional PID control strategy.

Recent Progress in Reinforcement Learning and Adaptive Dynamic Programming for Advanced Control Applications

Reinforcement learning(RL) has roots in dynamic programming and it is called adaptive/approximate dynamic programming(ADP) within the control community. This paper reviews recent developments in ADP along with RL and its applications to various advanced control fields. First, the background of the development of ADP is described, emphasizing the significance of regulation and tracking control problems. Some effective offline and online algorithms for ADP/adaptive critic control are displayed, where the main results towards discrete-time systems and continuous-time systems are surveyed, respectively.Then, the research progress on adaptive critic control based on the event-triggered framework and under uncertain environment is discussed, respectively, where event-based design, robust stabilization, and game design are reviewed. Moreover, the extensions of ADP for addressing control problems under complex environment attract enormous attention. The ADP architecture is revisited under the perspective of data-driven and RL frameworks,showing how they promote ADP formulation significantly.Finally, several typical control applications with respect to RL and ADP are summarized, particularly in the fields of wastewater treatment processes and power systems, followed by some general prospects for future research. Overall, the comprehensive survey on ADP and RL for advanced control applications has d emonstrated its remarkable potential within the artificial intelligence era. In addition, it also plays a vital role in promoting environmental protection and industrial intelligence.

Advanced nitrogen removal using pilot-scale SBR with intelligent control system built on three layer network

Since eutrophication has become increasingly severe in China,nitrogen and phosphorous have been the concern of wastewater treatment,especially nitrogen remov-al.The stabilization of the intelligent control system and nitrogen removal efficiency were investigated in a pilot-scale aerobic-anoxic sequencing batch reactor(SBR)with a treat-ment capacity of 60 m3/d.Characteristic points on the profiles of dissolved oxygen(DO),pH,and oxidation reduction potential(ORP)could exactly reflect the process of nitrifica-tion and denitrification.Using the intelligent control system not only could save energy,but also could achieve advanced nitrogen removal.Applying the control strategy water quality of the effluent could stably meet the national first discharge standard during experiment of 10 months.Even at low tem-perature(t=13°C),chemical oxygen demand(COD)and total nitrogen(TN)in the effluent were under 50 and 5 mg/L,respectively.

Hierarchical CNNPID Based Active Steering Control Method for Intelligent Vehicle Facing Emergency Lane-Changing

To resolve the response delay and overshoot problems of intelligent vehicles facing emergency lane-changing due to proportional-integral-differential(PID)parameter variation,an active steering control method based on Convolutional Neural Network and PID(CNNPID)algorithm is constructed.First,a steering control model based on normal distribution probability function,steady constant radius steering,and instantaneous lane-change-based active for straight and curved roads is established.Second,based on the active steering control model,a three-dimensional constraint-based fifth-order polynomial equation lane-change path is designed to address the stability problem with supersaturation and sideslip due to emergency lane changing.In addition,a hierarchical CNNPID Controller is constructed which includes two layers to avoid collisions facing emergency lane changing,namely,the lane change path tracking PID control layer and the CNN control performance optimization layer.The scaled conjugate gradient backpropagation-based forward propagation control law is designed to optimize the PID control performance based on input parameters,and the elastic backpropagation-based module is adopted for weight correction.Finally,comparison studies and simulation/real vehicle test results are presented to demonstrate the effectiveness,significance,and advantages of the proposed controller.

Congestion Control Using In-Network Telemetry for Lossless Datacenters

In the Ethernet lossless Data Center Networks (DCNs) deployedwith Priority-based Flow Control (PFC), the head-of-line blocking problemis still difficult to prevent due to PFC triggering under burst trafficscenarios even with the existing congestion control solutions. To addressthe head-of-line blocking problem of PFC, we propose a new congestioncontrol mechanism. The key point of Congestion Control Using In-NetworkTelemetry for Lossless Datacenters (ICC) is to use In-Network Telemetry(INT) technology to obtain comprehensive congestion information, which isthen fed back to the sender to adjust the sending rate timely and accurately.It is possible to control congestion in time, converge to the target rate quickly,and maintain a near-zero queue length at the switch when using ICC. Weconducted Network Simulator-3 (NS-3) simulation experiments to test theICC’s performance. When compared to Congestion Control for Large-ScaleRDMA Deployments (DCQCN), TIMELY: RTT-based Congestion Controlfor the Datacenter (TIMELY), and Re-architecting Congestion Managementin Lossless Ethernet (PCN), ICC effectively reduces PFC pause messages andFlow Completion Time (FCT) by 47%, 56%, 34%, and 15.3×, 14.8×, and11.2×, respectively.

Non-Minimum Phase Nonlinear System Predictive Control Based on Local Recurrent Neural Networks

After a recursive multi-step-ahead predictor for nonlinear systems based on local recurrent neural networks is introduced, an intelligent FID controller is adopted to correct the errors including identified model errors and accumulated errors produced in the recursive process. Characterized by predictive control, this method can achieve a good control accuracy and has good robustness. A simulation study shows that this control algorithm is very effective.

Intelligent vehicle lateral controller design based on genetic algorithmand T-S fuzzy-neural network

Non-linearity and parameter time-variety are inherent properties of lateral motions of a vehicle. How to effectively control intelligent vehicle (IV) lateral motions is a challenging task. Controller design can be regarded as a process of searching optimal structure from controller structure space and searching optimal parameters from parameter space. Based on this view, an intelligent vehicle lateral motions controller was designed. The controller structure was constructed by T-S fuzzy-neural network (FNN). Its parameters were searched and selected with genetic algorithm (GA). The simulation results indicate that the controller designed has strong robustness, high precision and good ride quality, and it can effectively resolve IV lateral motion non-linearity and time-variant parameters problem.

Controller Design of Intelligent Lighting Network

Studied are the controller design and basic principles of intelligent lighting network. TI’s MSP430F123 is used as a main controller. By using the ZigBee modules(Xbee/Xbee-PRO) and the GSM module(SIM300C) for wireless communications, the lighting control is enabled to access wireless network. This system uses a mobile phone to achieve light on-off directly, which can accomplish wireless control of intelligent lighting in families.

Nonlinear system compound inverse control method

A compound neural network is utilized to identify the dynamic nonlinear system. This network is composed of two parts： one is a linear neural network, and the other is a recurrent neural network. Based on the inverse theory a compound inverse control method is proposed. The controller has also two parts： a linear controller and a nonlinear neural network controller. The stability condition of the closed-loop neural network-based compound inverse control system is demonstrated .based on the Lyapunov theory. Simulation studies have shown that this scheme is simple and has good control accuracy and robustness.

Fuzzy controller design for networked control system with time-variant delays

Networked control system is new hot-point in control engineering. A new delayed model for networked control systems is presented, based on which an LQR controller is designed. A method of delays estimation online is also given. For the difficulty on implementation of LQR in NCSs with time-variant delays, the Mamdani intelligent logic with LQR controller is addressed. The stability of the networked control system is also given. Simulation results prove that the novel controller can make the system stable and robustly preserve the performance in terms of time-variant delays.

Multivariable Intelligent Decoupling Control System and its Application

Many industrial processes have compositive complexities including multivariable, strong coupling, nonlinearity, time-variant and operating condition variations. Combining multivariable adaptive decoupling control with neural networks, this paper presents a multivariable neural networkbased decoupling control algorithm. This control algorithm is integrated with distributed control technique and intelligent control technique, and a three-leveled intelligent decoupling control system consisting of basic control level, coordinating control level, and management and decision level is developed. The configuration and function of the control system are discussed in detail. This system has been successfully applied in ball mill pulverizing systems of 200MW power units, and remarkable benefits have been obtained.

Ethernet Implementation of Fault Tolerant Train Network for Entertainment and Mixed Control Traffic

This paper studies the integration of the control system and entertainment on board of train wagons. Both the control and entertainment loads are implemented on top of Gigabit Ethernet, each with a dedicated controller/server. The control load has mixed sampling periods. It is proven that this system can tolerate the failure of one controller in one wagon. In a two wagon scenario, fault tolerance at the controller level is studied, and simulation results show that the system can tolerate the failure of 3 controllers. The system is successful in meeting the packet end-to-end delay with zero packet loss in all OPNET simulated scenarios. The maximum permissible entertainment load is determined for the fault tolerant scenarios.

Fuzzy-GA PID controller with incomplete derivation and its application to intelligent bionic artificial leg

An optimal PID controller with incomplete derivation is proposed based on fuzzy inference and the geneticalgorithm, which is called the fuzzy-GA PID controller with incomplete derivation. It consists of the off-line part andthe on-line part. In the off-line part, by taking the overshoot, rise time, and settling time of system unit step re-sponse as the performance indexes and by using the genetic algorithm, a group of optimal PID parameters K*p , Ti* ,and Tj are obtained, which are used as the initial values for the on-line tuning of PID parameters. In the on-linepart, based on K; , Ti* , and T*d and according to the current system error e and its time derivative, a dedicatedprogram is written, which is used to optimize and adjust the PID parameters on line through a fuzzy inference mech-anism to ensure that the system response has optimal dynamic and steady-state performance. The controller has beenused to control the D. C. motor of the intelligent bionic artificial leg designed by the authors. The result of computersimulation shows that this kind of optimal PID controller has excellent control performance and robust performance.

Stabilization of Networked Control Systems Using a Mixed-Mode Based Switched Delay System Method

The phenomenon of mixed-mode is one of the most important characteristics of switched delay systems. If a networked control system(NCS) with network induced delays and packet dropouts(NIDs & PDs) is recast as a switched delay system, it is imperative to consider the effects of mixed-modes in the stability analysis for an NCS. In this paper, with the help of the interpolatory quadrature formula and the average dwell time method, stabilization of NCSs using a mixed-mode based switched delay system method is investigated based on a novel constructed Lyapunov-Krasovskii functional. With the Finsler's lemma, new exponential stabilizability conditions with less conservativeness are given for the NCS. Finally, an illustrative example is provided to verify the effectiveness of the developed results.

A Review: Artificial Neural Networks as Tool for Control Food Industry Process

In the last year, interest in using Artificial Neural networks as a modeling tool in food technology is increasing because they have found extensive utilization in solving many complex real world problems. Due to this and as previous step at development of some project, this paper intends to introduce the reader inside neural networks: general characteristics of the ANN, their architectures, their rules of learning, types of networks and ANN’s create process. Also this paper presents a comprehensive review of food industrial applications of artificial neural networks in the last year. ANN industrial applications are grouped and tabulated by their main functions and what they actually performed on the referenced papers with except the applications in the olive oil industry that are described with special emphasis.

Self-learning fuzzy neural network control for backside width of weld pool in pulsed GTAW with wire filler

The weld pool shape control by intelligent strategy was studied. In order to improve the ability of self-learning and self-adaptation of the ordinary fuzzy control, a self-learning fuzzy neural network controller (FNNC) for backside width of weld pool in pulsed gas tungsten arc welding (GTAW) with wire filler was designed. In FNNC, the fuzzy system was expressed by an equivalence neural network, the membership functions and inference rulers were decided through the learning of the neural network. Then, the FNNC control arithmetic was analyzed, simulating experiment was done, and the validating experiments on varied heat sink workpiece and varied gap workpiece were implemented. The maximum error between the real value and the given one was 0.39mm, the mean error was 0.014mm, and the root-mean-square was 0.14mm. The real backside width was maintained around the given value. The results show that the self-learning fuzzy neural network control strategy can achieve a perfect control effect under different set values and conditions, and is suitable for the welding process with the varied structure and coefficients of control model.

Semantics Interaction Control for Constructing Intelligent Ecology of Internet of Things and Critical Component Research

Intelligent equipment is a kind of device that is characterized by intelligent sensor interconnections, big data processing, new types of displays, human-machine interaction and so on for the new generation of information technology. For this purpose, in this paper, first, we present a type of novel intelligent deep hybrid neural network algorithm based on a deep bidirectional recurrent neural network integrated with a deep backward propagation neural network. It has realized acoustic analysis, speech recognition and natural language understanding for jointly constituting human-machine voice interactions. Second, we design a voice control motherboard using an embedded chip from the ARM series as the core, and the onboard components include ZigBee, RFID, WIFI, GPRS, a RS232 serial port, USB interfaces and so on. Third, we take advantage of algorithms, software and hardware to make machines “understand” human speech and “think” and “comprehend” human intentions to structure critical components for intelligent vehicles, intelligent offices, intelligent service robots, intelligent industries and so on, which furthers the structure of the intelligent ecology of the Internet of Things. At last, the experimental results denote that the study of the semantics interaction controls based on an embedding has a very good effect, fast speed and high accuracy, consequently realizing the intelligent ecology construction of the Internet of Things.