The dynamic competitive adsorption behaviors of different binary organic vapor mixtures on ACF-Ps under different operation conditions were investigated by gas chromatography in this paper. The studied mixtures includ...The dynamic competitive adsorption behaviors of different binary organic vapor mixtures on ACF-Ps under different operation conditions were investigated by gas chromatography in this paper. The studied mixtures included benzene/toluene, toluene/xylene, benzene/isopropylbenzene, ethyl acetate/toluene and benzene/ethyl acetate. Experimental results show that various ACF-Ps, as with ACF-W, can remove both vapors in binary vapor mixtures with over 99% of removal efficiency before the breakthrough point of the more weakly adsorbed vapor. In dynamic competitive adsorption, the more weakly adsorbed vapor not only penetrates early, but also will be displaced and desorbed consequently by stronger adsorbate and therefore produces a rolling up in the breakthrough curve. The ACF-Ps prepared at different temperatures have somewhat different adsorption selectivity. The feed concentration ratio of vapors, the length/diameter ratio and the thick of bed have effect on competitive adsorption. The competitive adsorption ability of a vapor is mainly related to its boiling point. Usually, the higher the boiling point, the stronger the vapor adsorbed on ACF-P.展开更多
In the industrial process of producing the strong phosphoric acid(SPA),clarification of the solution is essential to the ultimate product.However,the large viscosity of sediment and the induced interface interaction r...In the industrial process of producing the strong phosphoric acid(SPA),clarification of the solution is essential to the ultimate product.However,the large viscosity of sediment and the induced interface interaction result in difficulties when the SPA is clarified.CFD numerical methodology was applied to simulate internal flow field and performance of the low speed scraper based on Mixture solidliquid two-phase flow model.Sediment deposition was generated by loading solid particles at the bottom of clarifying vessel.The moving mesh and RNG k-εmodel were used to simulate the rotational turbulent flow in clarifying tank.Variables studied,amongst others,were the scraper rotation speed and the mounting height,which could affect the solid suspension height.Features of flow field and solid volume fraction distribution in computational domain were presented and analyzed.The numerical reports of the scraper torque and velocities of inlet and outlet filed were obtained.It seems the torque value of rotatio-nal axis and particle suspending height augment with an increasing rotating speed.Meanwhile,a high revolving speed is good for the deposition discharge.The particle fraction distribution in meridional surface and horizontal surface at fixed rotation speed were analyzed to determine the corresponding optimal installation height.The simulating results reflect the flow field is marginally stirred by the scraper and proper working parameters are obtained,in which case the comprehensive properties of the scraper and the clarifying tank are superior.展开更多
Most of the phosphorite deposits in the world contain isomorphism rare earths （RE） which are considerably difficult to be leached into solution in the wet phos- phoric acid process. In this work, a systematic study ...Most of the phosphorite deposits in the world contain isomorphism rare earths （RE） which are considerably difficult to be leached into solution in the wet phos- phoric acid process. In this work, a systematic study of leaching RE using sulfuric acid, phosphoric acid, mixed acid and two-step leaching of phosphoric acid and sulfuric acid was performed. The aims are to illuminate the main factors that inhibit RE leaching and to provide insights into the further enrichment of RE in the wet phosphoric acid solution. The results indicate that H2SO4 is not an effective acid for leaching isomorphism RE from phosphorite ore. The low RE leaching efficiency attributes to the RE cocrystallized and encapsulated by phosphogypsum （PG） as well as the precipitation of RE by RE sulfates or phosphates. High concentration of H3PO4 can enhance the dissolution and diffusion of RE ions. Hence, the optimized leaching mode of improving RE leaching efficiency is to adequately dissolve phosphorite ores in high concentration of H3PO4 solution and then add H2SO4 to crystallize PG. The effect of corystallization or encapsulation of PG on RE can be decreased due to the crystallizing mode of PG in the bulk solution instead of on the interface of solid reactants. RE leaching efficiency can be high up to 65% by the optimized leaching mode.展开更多
基金supported by Major Natural Science Foundation of Guangdong Provincethe Trans-century Training Programmed Foundation for the Talents of the State Education Ministry of Chinaand the Foundation for the Key Teachers in Chinese University
文摘The dynamic competitive adsorption behaviors of different binary organic vapor mixtures on ACF-Ps under different operation conditions were investigated by gas chromatography in this paper. The studied mixtures included benzene/toluene, toluene/xylene, benzene/isopropylbenzene, ethyl acetate/toluene and benzene/ethyl acetate. Experimental results show that various ACF-Ps, as with ACF-W, can remove both vapors in binary vapor mixtures with over 99% of removal efficiency before the breakthrough point of the more weakly adsorbed vapor. In dynamic competitive adsorption, the more weakly adsorbed vapor not only penetrates early, but also will be displaced and desorbed consequently by stronger adsorbate and therefore produces a rolling up in the breakthrough curve. The ACF-Ps prepared at different temperatures have somewhat different adsorption selectivity. The feed concentration ratio of vapors, the length/diameter ratio and the thick of bed have effect on competitive adsorption. The competitive adsorption ability of a vapor is mainly related to its boiling point. Usually, the higher the boiling point, the stronger the vapor adsorbed on ACF-P.
基金Graduate Research and Innovation Program in Jiangsu Province(KYZZ16_0286)
文摘In the industrial process of producing the strong phosphoric acid(SPA),clarification of the solution is essential to the ultimate product.However,the large viscosity of sediment and the induced interface interaction result in difficulties when the SPA is clarified.CFD numerical methodology was applied to simulate internal flow field and performance of the low speed scraper based on Mixture solidliquid two-phase flow model.Sediment deposition was generated by loading solid particles at the bottom of clarifying vessel.The moving mesh and RNG k-εmodel were used to simulate the rotational turbulent flow in clarifying tank.Variables studied,amongst others,were the scraper rotation speed and the mounting height,which could affect the solid suspension height.Features of flow field and solid volume fraction distribution in computational domain were presented and analyzed.The numerical reports of the scraper torque and velocities of inlet and outlet filed were obtained.It seems the torque value of rotatio-nal axis and particle suspending height augment with an increasing rotating speed.Meanwhile,a high revolving speed is good for the deposition discharge.The particle fraction distribution in meridional surface and horizontal surface at fixed rotation speed were analyzed to determine the corresponding optimal installation height.The simulating results reflect the flow field is marginally stirred by the scraper and proper working parameters are obtained,in which case the comprehensive properties of the scraper and the clarifying tank are superior.
基金financially supported by the National Natural Science Foundation of China (Nos. 51364005, 51564003 and 51574094)
文摘Most of the phosphorite deposits in the world contain isomorphism rare earths （RE） which are considerably difficult to be leached into solution in the wet phos- phoric acid process. In this work, a systematic study of leaching RE using sulfuric acid, phosphoric acid, mixed acid and two-step leaching of phosphoric acid and sulfuric acid was performed. The aims are to illuminate the main factors that inhibit RE leaching and to provide insights into the further enrichment of RE in the wet phosphoric acid solution. The results indicate that H2SO4 is not an effective acid for leaching isomorphism RE from phosphorite ore. The low RE leaching efficiency attributes to the RE cocrystallized and encapsulated by phosphogypsum （PG） as well as the precipitation of RE by RE sulfates or phosphates. High concentration of H3PO4 can enhance the dissolution and diffusion of RE ions. Hence, the optimized leaching mode of improving RE leaching efficiency is to adequately dissolve phosphorite ores in high concentration of H3PO4 solution and then add H2SO4 to crystallize PG. The effect of corystallization or encapsulation of PG on RE can be decreased due to the crystallizing mode of PG in the bulk solution instead of on the interface of solid reactants. RE leaching efficiency can be high up to 65% by the optimized leaching mode.
