ZTE's CDMA 2000 1x Mobile Communication System

With the operation of the CUC(China Unicom CorporationLtd.)“New Horizon”CD-MA network, the Chinesemobile communication market hasentered a new stage of development.GSM and CDMA have joined handsto work fully and efficiently. The to-

All-IP Based CDMA2000 1xEV-D0 Mobile Communication System

CDMA2000 1×EV-DO is an advancedtechnology optimized for high ratewireless data services that arecharacterized by burstness, high speed,asymmetric uplink and downlink data rateand insensitiveness to time delay. It has thefollowing advantages:(1)Data OptimizationCDMA2000 1×EV-DO, a data-optimizedversion of CDMA2000, delivers a forward peakdata rate of up to 2.4576 Mb/s within a 1.25

A Power Line-delivered and Lamp-based Broadband Mobile Communication System

A new mobile communications network architecture is proposed to solve four existing bottlenecks that restrict the rapid development of mobile communications,as well as to meet the development demands of future broadband mobile communications. The architecture introduces the Information Lamp (IL),a novel device carrying out transceiver function,as the access point,besides providing light. It fulfills information interaction between the access points and radio access network through the power line (or fiber). The new system,supported by core technologies such as multi-antenna based distributed space-time signal processing and distributed radio resource management,integrates the wired and wireless networks to provide high-speed and high-quality mobile communication services.

Analysis of reflected signal of quad rotor UAV based on model fitting in mobile communication system

In view of the many scenes of unmanned aerial vehicle(UAV)detection,a third-party signal source is used to design a receiver to monitor the UAV.It is of great significance to understand the reflection of the signal illuminating the UAV.Taking the communication base station(BS)signal as the third-party signal source,and considering the complete transmission link,reflection changes and loss fading of the communication signal,this study conducts model fitting for irregular UAV targets,simplifying complex targets into a combination of simple targets.Furthermore,the influence of the dielectric constant of the target surface and the signal irradiation angle on the signal reflection is analyzed.The analysis shows that the simulation results of this model fitting method are consistent with the results of other literature,which provides theoretical support for the detection of low and slow small targets such as UAVs.

Study of Communication Protocol and Link Establishing Mode of Mine Managing Mobile Communication System of Minute Areas

This paper studies the communication protocol and link establishing mode of the mine managing mobile communication system consisted of minute areas. The communication protocol suitable for the system is proposed and designed.

Locating Global System for Mobile Communication(GSM)Base Stations Using Geographic Information System(GIS)

The global system for mobile communication(GSM)is planned to meet the needs of the whole subscribers.The number of subscribers increased as the population increased due to the acceptance of GSM services by the subscribers.Thus,there should be a way to monitor base stations that will meet the increasing demand of subscribers in any area as a population surge will lead to more subscriptions.This will allow GSM network operators to serve their subscribers better and ease network congestion.This work presents a review of mobile evolution from the first generation to the fifth generation.A review of global positioning system(GPS)technology and its applications to geographic information systems(GIS)was done.The coordinates of these base stations were taken using a GPS device.These base station coordinates were then exported to QGIS for the design of the map.Thereafter,the output map was then integrated into the website.The discussions on the results followed and some useful suggestions given will go a long way to help the operators of GSM in Nigeria and in general.If the propositions given are adhered to,it will go a long way to help the operators reduce congestion on their network and thereby increase the satisfaction of the subscribers.

System Integration of Terrestrial Mobile Communication and Satellite Communication——The Trends, Challenges and Key Technologies in B5G and 6G

Mobile communication standards have been developed into a new era of B5G and 6G.In recent years,low earth orbit(LEO)satellites and space Internet have become hot topics.The integrated satellite and terrestrial systems have been widely discussed by industries and academics,and even are expected to be applied in those huge constellations in construction.This paper points out the trends of two stages towards system integration of the terrestrial mobile communication and the satellite communications:to be compatible with 5G,and to be integrated within 6G.Based on analysis of the challenges of both stages,key technologies are thereafter analyzed in detail,covering both air interface currently discussed in 3GPP for B5G and also novel network architecture and related transmission technologies toward future 6G.

Predictive Tracking Implementation for Mobile Communication Using Programmable Metasurface

The programmable metasurface(PM)is an antenna array architecture that realizes flexible beam steering.This functionality is achieved by controlling the unit cells designed with micro components such as positive-intrinsic-negative(PIN)diodes,which offers potential cost reductions in the next generation wireless communication systems.Although PM has been a popular topic in antenna design,its implementations in real-time systems accompanied by signal processing algorithms are challenging.In this paper,novel predictive tracking algorithms for mobile communication scenarios using a PM are created and implemented in a real-time system operating at 28 GHz.An angular speed prediction(ASP)algorithm is proposed to compute the position of user equipment(UE)based on the previously recorded beam directions.As another solution,an angle correction(AC)algorithm is proposed to further improve the prediction and tracking accuracy.As a benchmark,the comparisons to a previous PM tracking algorithm without prediction are presented.Both simulation and measurement results show that the prediction algorithms successfully improve the tracking performance,which also prove the feasibilities of PM-based systems to solve complex real-time signal processing problems.

A Real-time EMF Measuring System for Mobile Communication Towers in Sri Lanka

Telecommunications Regulatory Commission of Sri Lanka is the governing body which is responsible for the frequency allocation and monitoring the unauthorized Electromagnetic frequency(EMF)signal transmitting violations.However,in Sri Lanka,currently there is not any proper mechanism to monitor the radiation hazard level and its impact to the people living in the vicinity of mobile communication towers.There are approximately 7000 mobile transmitting towers in Sri Lanka to date and the used frequency range lies between 900 MHz to 3 GHz for mobile communication.Over the last few decades,many of the health hazard conditions were reported due to the radiation of those harmful EMFs.To cater this problem,a portable real time EMF signal strength measuring system with a radiation hazard level indicator was developed to monitor the EMF level and its impact.The proposed system operates with three intermediate frequency bands(i.e.900 MHz,1800 MHz and 2400 MHz)and it’s capable of measuring the power density and the radiation hazard level at that particular point which is being measured.Moreover,the corresponding radiation hazard level is indicated with reference to the standard power density levels published by the International Commission on Non-Ionizing Radiation Protection(ICNIRP^(*)).The system works with the overall accuracy of 88%in terms of identifying the power densities and its corresponding radiation hazard levels.

Research Framework of B3G Mobile Communications Systems

Compared with the services in 3G, services in Beyond 3G (B3G) have some distinctive characteristics such as the packet data services being the majority, more service types, larger scale of services, higher peak transmission rate, enlarged range of transmission rates, more spatial and temporal distribution differences, and more service transmission requests occurring in fast moving vehicles. In order to meet the requirements of B3G services, the B3G systems must have great improvement in network architecture, air interface scheme, radio resource allocation strategy, frequency bands, and Radio Frequency (RF) technology etc. Therefore, the research of the B3G systems should focus on the theory of generalized cellular communications networks, theory of the Multiple Input Multiple Output (MIMO) wireless transmission system, matching of radio resources to new-type air interfaces, new iterative detection and adaptive link methods, and new-type antenna and RF technologies.

Mobile Edge Communications, Computing, and Caching(MEC3) Technology in the Maritime Communication Network

With the increasing maritime activities and the rapidly developing maritime economy, the fifth-generation(5G) mobile communication system is expected to be deployed at the ocean. New technologies need to be explored to meet the requirements of ultra-reliable and low latency communications(URLLC) in the maritime communication network(MCN). Mobile edge computing(MEC) can achieve high energy efficiency in MCN at the cost of suffering from high control plane latency and low reliability. In terms of this issue, the mobile edge communications, computing, and caching(MEC3) technology is proposed to sink mobile computing, network control, and storage to the edge of the network. New methods that enable resource-efficient configurations and reduce redundant data transmissions can enable the reliable implementation of computing-intension and latency-sensitive applications. The key technologies of MEC3 to enable URLLC are analyzed and optimized in MCN. The best response-based offloading algorithm(BROA) is adopted to optimize task offloading. The simulation results show that the task latency can be decreased by 26.5’ ms, and the energy consumption in terminal users can be reduced to 66.6%.

ENERGY-EFFICIENT MICROWAVE COMPONENTS FOR MOBILE COMMUNICATION

In the coexisted world of 3G,4G,5G and many other specialized wireless communication systems,billions of connections could be existing for various information transmission types.Unluckily,data show that the increase of network capacity is heavily more than the increase of the network energy efficiency in recent years,which could lead to more energy consumption per transmitted bit in the future network.As basic units in mobile communication systems,microwave/RF components and modules play key roles

5G Green Mobile Communication Networks

With the popularization of wireless multimedia communications,the wireless traffic is predicated to be increased more than 1000time in the next decade.Some new technologies,e.g.,massive multi.input multi.output antennas,millimeter wave and small

A Novel 28 GHz Phased Array Antenna for 5G Mobile Communications

A novel phased array antenna consisting of 256 elements is presented and experimentally verified for 5G millimeter-wave wireless communications.The antenna integrated with a wave control circuit can perform real-time beam scanning by reconfiguring the phase of an antenna unit.The unit,designed at 28 GHz using a simple patch structure with one PIN diode,can be electronically controlled to generate 1 bit phase quantization.A prototype of the antenna is fabricated and measured to demonstrate the feasibility of this approach.The measurement results indicate that the antenna achieves high gain and fast beam-steering,with the scan beams within±60°range and the maximum gain up to 21.7 dBi.Furthermore,it is also tested for wireless video transmission.In ZTE Shanghai,the antenna was used for the 5G New Radio(NR)test.The error vector magnitude(EVM)is less than 3%and the adjacent channel leakage ratio(ACLR)less than−35 dBc,which can meet 5G system requirements.Compared with the conventional phased array antenna,the proposed phased array has the advantages of low power consumption,low cost and conformal geometry.Due to these characteristics,the antenna is promising for wide applications in 5G millimeter-wave communication systems.

A NOVEL MODULATION FOR MOBILE SATELLITE COMMUNICATIONS

It is a challenging problem to design a high performance modulation for mobile satellite communications due to the limited power and bandwidth resource.The paper improves Feher patented Quadrature Phase Shift Keying(FQPSK) by redefining the waveform.The novel FQPSK,with con-stant envelope,can be used to improve the power efficiency and frequency efficiency of mobile satellite communication.The study shows that the improved FQPSK outperforms conventional FQPSK over AWGN and is immune to the non-linearity of high power amplifier.At last,the impact of flat fading and multi-path fading of channel on the BER performance of improved modulation is analyzed.

Research on Site Planning of Mobile Communication Network

With the development of 5G technology, network communication has become the most commonly used tool in People’s Daily life and production. Due to the huge user base, the problem of site selection of communication network has become more and more complex. This paper mainly studies the problem of mobile communication network site planning, using 0 - 1 planning knapsack model, heuristic algorithm, simulated annealing algorithm and other methods, combined with MATLAB software to effectively solve the location of site coordinates and the type of base station selection, give the optimal results of site selection. It has certain guiding significance to mobile communication network site planning.

Unmanned aerial vehicle based intelligent triage system in mass-casualty incidents using 5G and artificial intelligence

BACKGROUND:Rapid on-site triage is critical after mass-casualty incidents(MCIs)and other mass injury events.Unmanned aerial vehicles(UAVs)have been used in MCIs to search and rescue wounded individuals,but they mainly depend on the UAV operator’s experience.We used UAVs and artificial intelligence(AI)to provide a new technique for the triage of MCIs and more efficient solutions for emergency rescue.METHODS:This was a preliminary experimental study.We developed an intelligent triage system based on two AI algorithms,namely OpenPose and YOLO.Volunteers were recruited to simulate the MCI scene and triage,combined with UAV and Fifth Generation(5G)Mobile Communication Technology real-time transmission technique,to achieve triage in the simulated MCI scene.RESULTS:Seven postures were designed and recognized to achieve brief but meaningful triage in MCIs.Eight volunteers participated in the MCI simulation scenario.The results of simulation scenarios showed that the proposed method was feasible in tasks of triage for MCIs.CONCLUSION:The proposed technique may provide an alternative technique for the triage of MCIs and is an innovative method in emergency rescue.

Design Framework of Unsourced Multiple Access for 6G Massive IoT

In this paper,ambient IoT is used as a typical use case of massive connections for the sixth generation(6G)mobile communications where we derive the performance requirements to facilitate the evaluation of technical solutions.A rather complete design of unsourced multiple access is proposed in which two key parts:a compressed sensing module for active user detection,and a sparse interleaver-division multiple access(SIDMA)module are simulated side by side on a same platform at balanced signal to noise ratio(SNR)operating points.With a proper combination of compressed sensing matrix,a convolutional encoder,receiver algorithms,the simulated performance results appear superior to the state-of-the-art benchmark,yet with relatively less complicated processing.

5G High Mobility Wireless Communications: Challenges and Solutions

The fifth generation(5G) network is expected to support significantly large amount of mobile data traffic and huge number of wireless connections,to achieve better spectrum- and energy-efficiency,as well as quality of service(QoS) in terms of delay,reliability and security.Furthermore,the 5G network shall also incorporate high mobility requirements as an integral part,providing satisfactory service to users travelling at a speed up to 500 km/h.This paper provides a survey of potential high mobility wireless communication(HMWC) techniques for 5G network.After discussing the typical requirements and challenges of HMWC,key techniques to cope with the challenges are reviewed,including transmission techniques under the fast timevarying channels,network architecture with mobility support,and mobility management.Finally,future research directions on 5G high mobility communications are given.

Mobile Network Computer Can Better Describe The Future of Information Society

In the paper, we illustrate the importance of the concept of mobile network computer from a technological perspective. Because of the usefulness of mobile network computers, with the growth of the Internet of things, mobile network computers may include not only TV box audio-visual equipment, wireless household appliances, and mobile communication equipment, but may also include devices such as intelligent foot rings, smart watches, smart glasses, smart shoes and smart coats. Considering the different types of networks, e.g. IP multimedia Subsystem(IMS), we explain why some network elements are inaccurate and misleading from a technological perspective. We aim to popularize the concept of mobile network computers for its accuracy and importance, which better define modern mobile terminals and reflects the nature of multiple mobile terminals based on the structure of their integrated computers and the capabilities of processing multimedia. In the computer and Internet age, network computers and mobile network computers are the main terminals of fixed and mobile networks, respectively. Therefore, based on the concept of mobile network computers, we discuss the future of information society.