This paper proposes a numerical methodology for the prediction of the first three modes of vibration of an electric motor fixed on a rigid base. A deep literature review supported the production of four ad hoc prototy...This paper proposes a numerical methodology for the prediction of the first three modes of vibration of an electric motor fixed on a rigid base. A deep literature review supported the production of four ad hoc prototypes that aided the development of the proposed approach. Tests carried out with the prototypes led to the procurement of the modal parameters be used to calibrate the numerical models, as well as the FRF （frequency response function） curves be used to validate the numerical solution. The validated model allowed structural changes to be then promoted on the prototypes, in order to make them more robust to variations in manufacturing and assembling processes. The mentioned adjustments and structural changes were accomplished by means of a process of structural optimization using Genetic Algorithm. The solution was developed based on the commercial finite element code ANSYS. The practical results obtained in this study show that a numerical model for modal analysis of an electric motor fixed on a rigid base with errors less than 3% for the first three modes of vibration can be achieved, allowing positive structural changes to be performed in the machine design that result in the minimization of manufacturing reworks associated with the dynamic behavior of the studied motor.展开更多
A dynamic finite element method combined with finite element mixed formula for contact problem is used to analyze the dynamic characteristics of gear system. Considering the stiffness excitation, error excitation and ...A dynamic finite element method combined with finite element mixed formula for contact problem is used to analyze the dynamic characteristics of gear system. Considering the stiffness excitation, error excitation and meshing shock excitation, the dynamic finite element model is established for the entire gear system which includes gears, shafts, bearings and gearbox housing. By the software of I-DEAS, the natural frequency, normal mode, dynamic time-domain response, frequency-domain response and one-third octave velocity grade structure borne noise of gear system are studied by the method of theoretical modal analysis and dynamic response analysis. The maximum values of vibration and structure borne noise are occurred at the mesh frequency of output grade gearing.展开更多
文摘This paper proposes a numerical methodology for the prediction of the first three modes of vibration of an electric motor fixed on a rigid base. A deep literature review supported the production of four ad hoc prototypes that aided the development of the proposed approach. Tests carried out with the prototypes led to the procurement of the modal parameters be used to calibrate the numerical models, as well as the FRF （frequency response function） curves be used to validate the numerical solution. The validated model allowed structural changes to be then promoted on the prototypes, in order to make them more robust to variations in manufacturing and assembling processes. The mentioned adjustments and structural changes were accomplished by means of a process of structural optimization using Genetic Algorithm. The solution was developed based on the commercial finite element code ANSYS. The practical results obtained in this study show that a numerical model for modal analysis of an electric motor fixed on a rigid base with errors less than 3% for the first three modes of vibration can be achieved, allowing positive structural changes to be performed in the machine design that result in the minimization of manufacturing reworks associated with the dynamic behavior of the studied motor.
基金Funded by the Natural Science Foundation of China (No. 50675232)the Natural Science Foundation of CQ CSTC (2006BB3008)
文摘A dynamic finite element method combined with finite element mixed formula for contact problem is used to analyze the dynamic characteristics of gear system. Considering the stiffness excitation, error excitation and meshing shock excitation, the dynamic finite element model is established for the entire gear system which includes gears, shafts, bearings and gearbox housing. By the software of I-DEAS, the natural frequency, normal mode, dynamic time-domain response, frequency-domain response and one-third octave velocity grade structure borne noise of gear system are studied by the method of theoretical modal analysis and dynamic response analysis. The maximum values of vibration and structure borne noise are occurred at the mesh frequency of output grade gearing.
