Optimization-based mode selection scheme for OAM millimeter wave system in the off-axis misalignment case

Millimeter-wave transmission combined with Orbital Angular Momentum(OAM)has the advantage of reducing the loss of beam power and increasing the system capacity.However,to fulfill this advantage,the antennas at the transmitter and receiver must be parallel and coaxial;otherwise,the accuracy of mode detection at the receiver can be seriously influenced.In this paper,we design an OAM millimeter-wave communication system for overcoming the above limitation.Specifically,the first contribution is that the power distribution between different OAM modes and the capacity of the system with different mode sets are analytically derived for performance analysis.The second contribution lies in that a novel mode selection scheme is proposed to reduce the total interference between different modes.Numerical results show that system performance is less affected by the offset when the mode set with smaller modes or larger intervals is selected.

Anti-symmetric sampled grating quantum cascade laser for mode selection

For mode selection in a quantum cascade laser(QCL),we demonstrate an anti-symmetric sampled grating(ASG).The wavelength of the-1-th mode of this laser has been blue-shifted more than 75 nm(~10 cm^(-1))compared with that of an ordinary sampled grating laser with an emission wavelength of approximately 8.6μm,when the periodicities within both the base grating and the sample grating are kept constant.Under this condition,an improvement in the continuous tuning capability of the QCL array is ensured.The ASG structure is fabricated in holographic exposure and optical photolithography,thereby enhancing its flexibility,repeatability,and cost-effectiveness.The wavelength modulation capability of the two channels of the grating is insensitive to the variations in channel size,assuming that the overall waveguide width remains constant.The output wavelength can be tailored freely within a certain range by adjusting the width of the ridge and the material of the cladding layer.

Mode Selection and Resource Allocation for Deviceto-Device Communications in 5G Cellular Networks

To meet the increasing demand of wireless broadband applications in future 5G cellular networks, Device-to-Device(D2D) communications serve as a candidate paradigm to improve spectrum efficiency. Considering the challenges after D2 D transmission is introduced for future cellular networks, this paper deals with mode selection and resource allocation issues related with D2 D communications. First, we propose a mode selection scheme which aims at guaranteeing the transmission of cellular users and also considering the potential interference. We analyze the condition under which D2 D underlay mode should be used. Second, we answer the question of "how to effectively reuse cellular resource once underlaying mode is adopted". We further present a resource allocation scheme that focuses on minimizing overall interference as well as a power control method to improve the performance of D2 D systems. Simulation results demonstrate that system parameters greatly affect the switching condition of mode selection and probability of choosing underlay mode. Furthermore, for D2 D underlaying scenario, the proposed resource allocation algorithm guarantees the transmission of cellular users with consideration of transmission requirements of D2 D users. Hence, the proposed scheme can achieve better user experience.

Joint Power Allocation and Mode Selection for D2D Communications with Imperfect CSI

Device-to-device(D2D) communications can be underlaid with a cellular infrastructure to increase resource utilization, improve user throughput and save battery energy. In such networks, power allocation and mode selection are crucial problems. To address the joint optimization of power and mode selection under imperfect CSI, we propose an optimal, energy-aware joint power allocation and mode selection(JPAMS) scheme. First, we derive the closed-form solution for the power minimization for both D2 D and cellular links while satisfying different quality of service(Qo S) constraints. Second, we address the mode selection problem in presence of imperfect CSI, based on the derived power allocation. Moreover, the theoretical analysis and simulation results are presented to evaluate the proposed scheme for the D2 D communications.

Social-Aware Joint Mode Selection and Link Allocation for Device-to-Device Communication Underlaying Cellular Networks

Joint mode selection and link allocation are crucial to achieve the advantage of Device-to-Device(D2 D) communications in improving spectral efficiency. In practice, cellular users tend to not be totally altruistic or absolutely selfish. How to stimulate them to devote their links and how to allocate their links to D2 D pair candidates efficiently are two main challenges. In this paper, we encourage cellular users through the variable payment with regard to the social tie strength between cellular users and D2 D pair candidates. In particular, the social tie strength is inferred through a graph inference model and its impact on the payment is quantified as a negative exponential function. Then, we propose a resource scheduling optimization model based on the non-transferable utility coalition formation game, and a distributed coalition formation algorithm based on the Pareto preference and merge-and-split rule. From them, the final coalition structure is obtained, which reflects the strategy of mode selection and link allocation. Numerical results are presented to verify the effectiveness of our proposed scheme.

Power allocation and mode selection methods for cooperative communication in the rectangular tunnel

For the multipath fading on electromagnetic waves of wireless communication in the confined areas,the rectangular tunnel cooperative communication system was established based on the multimode channel model and the channel capacity formula derivation was obtained.On the optimal criterion of the channel capacity,the power allocation methods of both amplifying and forwarding(AF) and decoding and forwarding(DF) cooperative communication systems were proposed in the limitation of the total power to maximize the channel capacity.The mode selection methods of single input single output(SISO) and single input multiple output(SIMO) models in the rectangular tunnel,through which the higher channel capacity can be obtained,were put forward as well.The theoretical analysis and simulation comparison show that,channel capacity of the wireless communication system in the rectangular tunnel can be effectively enhanced through the cooperative technology;channel capacity of the rectangular tunnel under complicated conditions is maximized through the proposed power allocation methods,and the optimal cooperative mode of the channel capacity can be chosen according to the cooperative mode selection methods given in the paper.

Visible-light all-fiber vortex lasers based on mode selective couplers

We demonstrate visible-light all-fiber vortex lasers by incorporating the home-made mode selective couplers (MSCs). The MSC at green or red wavebands is fabricated by specially designing and fusing a single-mode fiber (SMF) and a few-mode fiber (FMF). The MSCs inserted into visible fiber cavities act as power splitters and mode converters from the LP01 to LP11 mode at green and red wavelengths, respectively. The red-light all-fiber vortex laser is formed by a 10-cm Pr3+/Yb3+:ZBLAN fiber, a fiber Bragg grating, a fiber end-facet mirror and the MSC at 635 nm, which generates vortex beams with OAM±1 at 634.4 nm and an output power of 13 mW. The green-light all-fiber vortex laser consists of a 12-cm Ho3+:ZBLAN fiber, two fiber pigtail mirrors, and the MSC at 550 nm, which generates vortex beams with OAM±1 at 548.9 nm and an output power of 3 mW.

A SEMI-OPEN-LOOP CODING MODE SELECTION ALGORITHM BASED ON EFM AND SELECTED AMR-WB+ FEATURES

To solve the problems of the AMR-WB+(Extended Adaptive Multi-Rate-WideBand) semi-open-loop coding mode selection algorithm,features for ACELP(Algebraic Code Excited Linear Prediction) and TCX(Transform Coded eXcitation) classification are investigated.11 classifying features in the AMR-WB+ codec are selected and 2 novel classifying features,i.e.,EFM(Energy Flatness Measurement) and stdEFM(standard deviation of EFM),are proposed.Consequently,a novel semi-open-loop mode selection algorithm based on EFM and selected AMR-WB+ features is proposed.The results of classifying test and listening test show that the performance of the novel algorithm is much better than that of the AMR-WB+ semi-open-loop coding mode selection algorithm.

Mode Selection for CoMP Transmission with Nonideal Synchronization

This paper proposes a mode selection scheme to improve the spectral efficiency for coordinated multi-point(CoMP) transmission with phase synchronization errors(PSE). Upper bounds of average achievable rate for different CoMP transmission modes, such as coordinated beamforming(CB) and joint processing(JP), are derived by random matrix theory and asymptotic mathematical approximation. According to these upper bounds, the proposed scheme switches CoMP transmission mode between CB and JP adaptively to enhance the average achievable rate. Simulation results show that these upper bounds agree well with the average achievable rates for both JP and CB, and the proposed scheme outperforms traditional single mode CoMP transmission when PSE exist.

A Novel Efficient Mode Selection Approach for H.264

H.264 video coding standard introduces motion estimation with multiple block sizes to achieve a considerably higher coding efficiency than other video coding algorithms. However, this comes at the greatly increased computing complexity at the encoder. In this paper, a method is proposed to eliminate some redundant coding modes that contribute very little coding gain. The simulation results show that the algorithm can remarkably decrease the complexity at the encoder while keeping satisfying coding efficiency.

Mode Selection Strategy of Dual Distribution Channel Based on Revenue Analysis

Within the scope of dual distribution channel(DDC)modes—ME&T-C and M-T&E-C,a game model designed for channel members was proposed.Based on this game model,the game equilibrium under both centralized and decentralized decisionmaking situations was analyzed,the channel members' and overall revenues of two modes under the same decision-making situation are compared,and the influence of demand shift coefficient to the overall and members' revenue was also studied through example analysis.Based on the comparison and analysis of the revenue yielded from the two DDC modes,it's discovered that within a certain hypothetical range,the M-T&E-C mode seems to be a better option for the manufacturer than the ME&T-C mode.Therefore,this discovery can be served as a theoretical reference for manufacturers when choosing the optimal DDC mode in real life.

Temperature-controlled mode selection of Er-doped random fiber laser with disordered Bragg gratings

In this paper, we proposed a way to realize an Er-doped random fiber laser(RFL) with a disordered fiber Bragg grating(FBG) array, as well as to control the lasing mode of the RFL by heating specific locations of the disordered FBG array. The disordered FBG array performs as both the gain medium and random distributed reflectors, which together with a tunable point reflector form the RFL. Coherent multi-mode random lasing is obtained with a threshold of between 7.5 and 10 mW and a power efficiency between 23% and 27% when the reflectivity of the point reflector changes from 4% to 50%. To control the lasing mode of random emission, a specific point of the disordered FBG array is heated so as to shift the wavelength of the FBG(s) at this point away from the other FBGs.Thus, different resonance cavities are formed, and the lasing mode can be controlled by changing the location of the heating point.

Research on Construction Mode and Plant Selection of Linpan in Chengdu Plain

On the basis of investigation and analysis of Linpan in Chengdu Plain,in view of the ongoing reconstruction engineering of residential styles in Chengdu Plain,construction mode of Linpan in Chengdu Plain at new period had been proposed and plants had been selected in accordance with the function features of different modes. The initial study result was of certain instructive significance to the protection and development of Linpan in Chengdu Plain to some extent.

Cybertwin-Assisted Mode Selection in Ultra-Dense LEO Integrated Satellite-Terrestrial Network

Ultra-dense low earth orbit(LEO)integrated satellite-terrestrial network(ULISTN)has become an emerging paradigm to support massive access of Internet of things(IoT)in beyond fifth generation mobile networks(B5G).In ULISTN,there are two communication modes:cellular mode and satellite mode,where IoT users assessing terrestrial small base stations(TSBSs)and terrestrial-satellite terminals(TSTs)respectively.However,how to optimize the network performance and guarantee self-interests of the operator and IoT users in ULISTN is a challenging issue.In this paper,we propose a cybertwin-assisted joint mode selection and dynamic pricing(JMSDP)scheme for effective network management in ULISTN,where cybertwin serves as the intelligent agent.In JMSDP,the operator determines optimal access prices of TSBSs and TSTs,while each user selects the access mode according to access prices.Specifically,the operator conducts the Stackelberg game aiming at maximizing average throughput depending on the mode selection results of IoT users.Meanwhile,IoT users as followers adopt the evolutionary game to choose an access mode based on the access prices provided by the operator.Simulation results show that the proposed JMSDP can improve the average throughput and reduce the delay effectively,comparing with random access(RA)and maximum rate access.

Research on Selection of Equipment Maintenance Modes

The development of equipment maintenance management is introduced, and equipment maintenance concept is defined. Equipment maintenance modes are classified, analyzed and compared, which merits and demerits are pointed out. At last, a decision-making frame to select equipment maintenance modes is advanced, and steps to select and implement equipment maintenance are given.

Infra-Marginal Analysis Model for Provision Mode Selection for E-commerce Services

E-commerce has grown extraordinarily since the emergence of the internet, and many types of services are employed to accelerate this process. Service quality and productivity are two critical indicators to evaluate the competitiveness of e-commerce companies. Deciding which provision mode of e-commerce services （buy, sell, or self-provide） to adopt is a key operational strategy issue. This paper investigates the conditions and limitations of e-commerce services＇ optimal supply modes, and proposes a cost oriented infra-marginal model where service demand is considered an exogenous variable due to its non-elastic and unprofitable characteristics. By analyzing the main impact factors of this model, this paper infers provision mode selection strategies, which are determined by four factors： transaction cost, service price, service demand, and competitive advantages. Decision trees are derived from these strategies to help e-commerce companies make appropriate decisions. Finally, the proposed model＇s feasibility is verified by two case studies.

Mode selection of Lamb waves for the evaluation of solid plates with liquid loading

This paper studies the mode selection of Lamb waves for evaluating solid plates with liquid loading. For this purpose, the Lamb wave selected should have the features such as zero normal displacement components at the plate surface in contact with liquid, small dispersion, and maximum group velocity. It is found that when the phase velocity of Lamb wave is equal to the longitudinal wave velocity of the plate material, its normal displacement at the plate surface is always zero. Through the numerical analyses, the specific S2 Lamb wave that has zero normal displacement component at the plate surface, small dispersion and maximum group velocity compared with the other Lamb waves has been found. With respect to the specific S2 Lamb wave, some experimental examinations have been carried out. It is found that the liquid loading on the plate surface has less influence on the specific S2 Lamb wave signal but it can effectively eliminate the other signals. Moreover, the specific S2 Lamb wave selected exhibits the capability of detecting multiple defects in the solid plate with the liquid loading. It can be concluded that the specific S2 Lamb wave selected is suitable for the evaluation of solid plates with liquid loading.

Piezoelectric transducer parameter selection for exciting a single mode from multiple modes of Lamb waves

Excitation and propagation of Lamb waves by using rectangular and circular piezoelectric transducers surface- bonded to an isotropic plate are investigated in this work. Analytical stain wave solutions are derived for the two transducer shapes, giving the responses of these transducers in Lamb wave fields. The analytical study is supported by a numericM simulation using the finite element method. Symmetric and antisymmetric components in the wave propagation responses are inspected in detail with respect to test parameters such as the transducer geometry, the length and the excitation frequency. By placing only one piezoelectric transducer on the top or the bottom surface of the plate and weakening the strength of one mode while enhancing the strength of the other modes to find the centre frequency, with which the peak wave amplitude ratio between the SO and A0 modes is maximum, a single mode excitation from the multiple modes of the Lamb waves can be achieved approximately. Experimental data are presented to show the validity of the analyses. The results are used to optimize the Lamb wave detection system.

Greedy Algorithm Applied to Relay Selection for Cooperative Communication Systems in Amplify-and-Forward Mode

Using a relaying system to provide spatial diversity and improve the system performance is a tendency in the wireless cooperative communications. Amplify-and-forward （AF） mode with a low complexity is easy to be implemented. Under the consideration of cooperative communication systems, the scenario includes one information source, M relay stations and N destinations. This work proposes a relay selection algorithm in the Raleigh fading channel. Based on the exhaustive search method, easily to realize, the optimal selection scheme can be found with a highly complicated calculation. In order to reduce the computational complexity, an approximate optimal solution with a greedy algorithm applied for the relay station selection is proposed. With different situations of the communication systems, the performance evaluation obtained by both the proposed algorithm and the exhaustive search algorithm are given for comparison. It shows the proposed algorithm could provide a solution approach to the optimal one.

基于动态模态分解-自适应变步长油浸式电力变压器绕组瞬态温升快速计算方法

为了改善当前油浸式电力变压器绕组瞬态温升计算过慢的问题,该文结合动态模态分解法和自适应变步长法提出了一种动态模态分解(DMD)-自适应变步长(ATS)快速计算方法。首先,该方法引入了动态模态分解算法,利用动态系统中前若干时步提取得到的变化特征,近似拟合其后一段时间内的系统变化,并通过选取主模态降低计算时间。其次,为了提高DMD算法性能,进一步提出结合ATS方法,通过自适应调整计算步长,提高瞬态计算效率;为了验证算法的计算精度和效率,建立了八分区分匝绕组数值传热模型并在此基础上将该文所提算法与仿真软件Fluent的计算结果进行对比,结果表明,在计算精度方面,二者结果几乎一致,计算误差最大不超过0.3 K;对于计算效率,该文算法的总计算时间为5.99 s,仅为Fluent总计算时间的1/89,且算法时间步数仅为Fluent的4.7%。最后,为了验证DMD-ATS算法的工程实用性,基于产品级油浸式电力变压器绕组结构搭建温升实验平台,并将所提算法计算结果与实验结果进行对比,结果表明所提算法在各测量线饼的误差均处在可接受的范围内,最大误差仅为4.57 K,且包含预处理时间在内的计算时间仅为69.14 s,计算时步仅需17步,较当前主流的计算方法效率有明显提高。综合算法的精度和效率,充分说明所提算法具有一定工程价值。