The whole-process project cost management based on building information modeling(BIM)is a new management method,aiming to realize the comprehensive optimization and improvement of project cost management through the a...The whole-process project cost management based on building information modeling(BIM)is a new management method,aiming to realize the comprehensive optimization and improvement of project cost management through the application of BIM technology.This paper summarizes and analyzes the whole-process project cost management based on BIM,aiming to explore its application and development prospects in the construction industry.Firstly,this paper introduces the role and advantages of BIM technology in engineering cost management,including information integration,data sharing,and collaborative work.Secondly,the paper analyzes the key technologies and methods of the whole-process project cost management based on BIM,including model construction,data management,and cost control.In addition,the paper also discusses the challenges and limitations of the whole-process BIM project cost management,such as the inconsistency of technical standards,personnel training,and consciousness change.Finally,the paper summarizes the advantages and development prospects of the whole-process project cost management based on BIM and puts forward the direction and suggestions for future research.Through the research of this paper,it can provide a reference for construction cost management and promote innovation and development in the construction industry.展开更多
Computer vision-based inspection methods show promise for automating post-earthquake building inspections.These methods survey a building with unmanned aerial vehicles and automatically detect damage in the collected ...Computer vision-based inspection methods show promise for automating post-earthquake building inspections.These methods survey a building with unmanned aerial vehicles and automatically detect damage in the collected images.Nevertheless,assessing the damage′s impact on structural safety requires localizing damage to specific building components with known design and function.This paper proposes a BIM-based automated inspection framework to provide context for visual surveys.A deep learning-based semantic segmentation algorithm is trained to automatically identify damage in images.The BIM automatically associates any identified damage with specific building components.Then,components are classified into damage states consistent with component fragility models for integration with a structural analysis.To demonstrate the framework,methods are developed to photorealistically simulate severe structural damage in a synthetic computer graphics environment.A graphics model of a real building in Urbana,Illinois,is generated to test the framework;the model is integrated with a structural analysis to apply earthquake damage in a physically realistic manner.A simulated UAV survey is flown of the graphics model and the framework is applied.The method achieves high accuracy in assigning damage states to visible structural components.This assignment enables integration with a performance-based earthquake assessment to classify building safety.展开更多
In order to enhance modeling efficiency and accuracy,we utilized 3D laser point cloud data for indoor space modeling.Point cloud data was obtained with a 3D laser scanner and optimized with Autodesk Recap and Revit so...In order to enhance modeling efficiency and accuracy,we utilized 3D laser point cloud data for indoor space modeling.Point cloud data was obtained with a 3D laser scanner and optimized with Autodesk Recap and Revit software to extract geometric information about the indoor environment.Furthermore,we proposed a method for constructing indoor elements based on parametric components.The research outcomes of this paper will offer new methods and tools for indoor space modeling and design.The approach of indoor space modeling based on 3D laser point cloud data and parametric component construction can enhance modeling efficiency and accuracy,providing architects,interior designers,and decorators with a better working platform and design reference.展开更多
随着隔震技术的推广应用以及建筑业信息化水平的持续提升,在隔震工程中对隔震层建筑信息模型(building information modeling, BIM)建模的需求逐渐增长,然而针对性的研究工作相对较少。为此,围绕隔震支座BIM模型的高效建模方法和应用模...随着隔震技术的推广应用以及建筑业信息化水平的持续提升,在隔震工程中对隔震层建筑信息模型(building information modeling, BIM)建模的需求逐渐增长,然而针对性的研究工作相对较少。为此,围绕隔震支座BIM模型的高效建模方法和应用模块开展了研究。首先,综合隔震支座应用情况和力学特性,可将其分为橡胶隔震支座、滑移摩擦隔震支座和其他类型隔震支座,据此提出了隔震支座BIM快速建模模块基本架构;随后,基于Revit和Visual Studio平台开发了三类隔震支座BIM模型的快速建模功能,并实现了连接节点参数化建模和支座批量/手动布置的操作功能;最后,开展了某化工公司的库房隔震加固项目的隔震层BIM模型建模实践,结果表明:利用快速建模模块可将隔震层BIM建模操作从7个步骤降低至2个步骤,且使用过程中对隔震支座构造细节的认知要求相对较低。同时,建成后的BIM模型与实际工程在建筑信息的多个方面具有较好的一致性。相关研究可为建筑和桥梁隔震工程的BIM建模提供参考和借鉴。展开更多
The axial selection of tunnels constructed in the interlayered soft-hard rock mass affects the stability and safety during construction.Previous optimization is primarily based on experience or comparison and selectio...The axial selection of tunnels constructed in the interlayered soft-hard rock mass affects the stability and safety during construction.Previous optimization is primarily based on experience or comparison and selection of alternative values under specific geological conditions.In this work,an intelligent optimization framework has been proposed by combining numerical analysis,machine learning(ML)and optimization algorithm.An automatic and intelligent numerical analysis process was proposed and coded to reduce redundant manual intervention.The conventional optimization algorithm was developed from two aspects and applied to the hyperparameters estimation of the support vector machine(SVM)model and the axial orientation optimization of the tunnel.Finally,the comprehensive framework was applied to a numerical case study,and the results were compared with those of other studies.The results of this study indicate that the determination coefficients between the predicted and the numerical stability evaluation indices(STIs)on the training and testing datasets are 0.998 and 0.997,respectively.For a given geological condition,the STI that changes with the axial orientation shows the trend of first decreasing and then increasing,and the optimal tunnel axial orientation is estimated to be 87.This method provides an alternative and quick approach to the overall design of the tunnels.展开更多
This paper outlines a methodology to estimate monthly precipitation surfaces at 1-kin resolution for the Upper Shiyang River watershed (USRW) in northwest China. Generation of precipitation maps is based on the appl...This paper outlines a methodology to estimate monthly precipitation surfaces at 1-kin resolution for the Upper Shiyang River watershed (USRW) in northwest China. Generation of precipitation maps is based on the application of a four-variable genetic algorithm (GA) trained on 10 years of weather and ancillary data, i.e., surface air temperature, relative humidity, Digital Elevation Model-derived estimates of elevation, and time of year collected at 29 weather stations in west-central Gansu and northern Qinghai province. An observed-to-GA predicted data comparison of 10 years of precipitation collected at the 29 weather stations showed that about 84% of the variability in observed values could be explained by the trained GA, including variability in two independent datasets. Point-comparisons of observed and modeled precipitation along an elevation-rainfall gradient demonstrated near-similar spatiotemporal patterns. A precipitation surface for USRW for July, 2005, was developed with the trained GA and input surfaces of surface air temperature and relative humidity generated from Moderate Resolution Imaging Spectroradiometer sensor (MODIS) products of land surface temperature. Spatial tendencies in predicted maximum and minimum values of surface air temperature, relative humidity, and precipitation within a 2-kin radius circle around selected weather stations were in close agreement with the values measured at the weather stations.展开更多
Proper design of rock bolt support in underground mines is critical to avoid incidents, accidents and loss of production. The traditional design approach only considers the axial(tensile) capacity and this is clearly ...Proper design of rock bolt support in underground mines is critical to avoid incidents, accidents and loss of production. The traditional design approach only considers the axial(tensile) capacity and this is clearly not the situation in situ, where a rock bolt is subjected to both axial and shear/bending loads which determines its overall performance and failure behaviour. To demonstrate and analyse the shear displacement in bedded roof, scaled physical models of underground excavation were created. From the models it was found that the shear displacement between the layers depends on the vertical roof deformation and thickness of beds. To analyse the effect of combined loading on rock bolt design for suspension and beam building models, analytical methods were used to calculate the required spacing of rock bolt for a given safety factor. Numerical models were then created using Rocscience RS2 software to establish the stresses on the rock bolt. The results show a significant reduction in safety factor for suspension as demonstrated in an example(reduced from 3.5 to 2.0) and beam building(2.0 to 1.36) when the rock bolt capacities are calculated considering the effect of combined loading as opposed to just the axial or shear loads.展开更多
Underground pipeline networks constitute a major component of urban infrastructure,and thus,it is imperative to have an efficient mechanism to manage them.This study introduces a secondary development system to effici...Underground pipeline networks constitute a major component of urban infrastructure,and thus,it is imperative to have an efficient mechanism to manage them.This study introduces a secondary development system to efficiently model underground pipeline networks,using the building information modeling(BIM)-based software Revit.The system comprises separate pipe point and tubulation models.Using a Revit application programming interface(API),the spatial position and attribute data of the pipe points are extracted from a pipeline database,and the corresponding tubulation data are extracted from a tubulation database.Using the Family class in Revit API,the cluster in the self-built library of pipe point is inserted into the spatial location and the attribute data is added;in the same way,all pipeline instances in the pipeline system are created.The extension and localization of the model accelerated the modeling speed.The system was then used in a real construction project.The expansion of the model database and rapid modeling made the application of BIM technology in three-dimensional visualization of underground pipeline networks more convenient.Furthermore,it has applications in pipeline engineering construction and management.展开更多
Yunnan University of finance and Trade recording to t he statistics of chain’s output of tea, Yunnan province has entered the ranks of the larger ones of the production in China. Yunnan’s tea industry has the natur ...Yunnan University of finance and Trade recording to t he statistics of chain’s output of tea, Yunnan province has entered the ranks of the larger ones of the production in China. Yunnan’s tea industry has the natur al resources and the economic effects envied, on the orther hand, Yunnan’s tea m arket has gradually become less and the economic effects have been poor. Through our comprehensive investigation and study, we consider that because the supply chain has seriously been disjointed among production, supply and sale of tea ind ustry in Yunnan, the supply chain of Yunnan’s tea industry need to be reorganize d for the promoting the development of Yunnan’s tea industry. The essence of reengineering of Yunnan’s tea industrial supply chain is to set u p the model of the trailed operation,to strengthen the strategic partnership man agement between the supply chain, to optimize the design of the supply chain and build up and improve the working mechanism for management of the tea industrial supply chain. The structure of Yunnan’s model of tea industrial supply chain: the model of com mercial flow; the model of logistics flow; the model of information flow and the model of cash flow. The solutions and policies for the reorganization of Yunnan’s tea industrial sup ply chain: planning, logistics and distribution and sales. Set up the supporting system of information technology. Build up the control system of production and planning.Improve the working mechanism of Yunnan’s tea industrial supply chain. Implement the engineering of exporting Yunnan’s tea into the markets of other p rovinces and foreign markets. Have many the channels that raise the funds of dev elopment for Yunnan’s tea industry.展开更多
To comply with the strategic goal of "mass entrepreneurship and innovation",universities and col eges adjusted the discipline cultivation objective to be cultivation of innovational and enterprising talents....To comply with the strategic goal of "mass entrepreneurship and innovation",universities and col eges adjusted the discipline cultivation objective to be cultivation of innovational and enterprising talents.Innovational and enterprising talents are inseparable from creative thinking,while the cultivation of creative thinking is the basis of cultivation of innovational and enterprising talents.This paper discussed cultivation of students' creative thinking through making building models in basic course of architectural design.Besides,it analyzed the relation between making of building models and creative thinking from divergent thinking,multi-directional thinking,element changing thinking,conversion thinking,and reverse thinking.It is expected to cultivate students' creative thinking through building models,to lay a solid foundation for architectural design courses,and to provide more architectural designers with more solid foundation and creative thinking.展开更多
A new approach to modifying the stiffness and mass matrices of finite element models is presented to improve the calculation precision.By measuring the mode frequencies and shapes of both of the original and the new s...A new approach to modifying the stiffness and mass matrices of finite element models is presented to improve the calculation precision.By measuring the mode frequencies and shapes of both of the original and the new structures with changed stiffness and mass,the stiffness and mass matrices of the finite element model can be updated through matrices calculation and solving algebra equations.Taking a multi-freedom model as an example,the relation between the number of the modes and the correction precision of stiffness and mass matrix elements is researched.The facility and precision of the method are totally confirmed especially when the modeling error is known limited to a definite local range.The feasibility of the approach is proven by an effective engineering application to the model updating of a wing piece used in flutter test.展开更多
Building Information Modelling (BIM) is a technology and a process that has brought changes in the construction’s traditional procurement system. Kenya lacks contractual guidelines on implementation of BIM;this makes...Building Information Modelling (BIM) is a technology and a process that has brought changes in the construction’s traditional procurement system. Kenya lacks contractual guidelines on implementation of BIM;this makes the adoption of BIM slow and difficult. Previous research has identified a gap in contractual relationships, roles and resulting risks. The objectives of this study were to investigate BIM adoption in Nairobi and to investigate the influence of BIM on Engineering Contract Management (ECM)</span><span style="font-family:Verdana;"> in Nairobi Kenya</span><span style="font-family:Verdana;">. The survey research was a descriptive study with 175 responsive questionnaires. Respondents comprised of Civil Engineers, Construction Project Managers, Architects, Quantity Surveyors, Contractors and Facility Managers. Data was collected through self-administered questionnaire and in-depth interview. Descriptive analytics, correlation and Exploratory factor analysis methods were used to analyse quantitative data. Qualitative data was analysed thematically. It emerged that adoption level was at 56.6% and shallow understanding of BIM capabilities remains to be a barrier to its adoption and implementation. It also emerged that BIM improves ECM;when time, cost, quality, collaboration and return on investment improve, ECM becomes easier. Latent factors found in BIM and ECM relationship were Legal Implications, awareness and knowledge, efficiency, versatility, mandate and leadership, and competitiveness. Further, the study found out that BIM influence on ECM demands for establishment of standards, guidelines, policy, legal framework, and regulations, which can be achieved by amending the public procurement act which dictates the operation of all the other standard forms of contract. Further research should be conducted to measure whether the understanding of BIM had positively improved.展开更多
Global concerns toward environmental issues have induced growing demand for new approaches in the construction because of its considerable impact on the environment and use of natural resources. Through using construc...Global concerns toward environmental issues have induced growing demand for new approaches in the construction because of its considerable impact on the environment and use of natural resources. Through using construction sustainability tools, methods and techniques, a greener design can be applied during various building phases. In this connection, it is argued that the analytical and integrated models applied by Building Information Modelling (BIM) may also facilitate this process to be performed more efficiently. BIM and construction sustainability are quite different initiatives, but both have received much attention in recent years in the architecture, engineering and construction (AEC) industry. A rigorous analysis of the interactions between them implies that a synergy exists which, if properly it is understood that can be helpful to reduce the environmental impacts of the AEC industry. A BIM-based design model can contribute to sustainability through its three main dimensions which are environmental, economic and social. In this paper, by reviewing the existing literature on BIM and construction sustainability and using a matrix to analyze construction sustainability dimensions and BIM functionalities a number of interactions have been discussed. It can be concluded that despite there are many improvements in implementation of BIM in environmental and economic aspects of sustainability, its potential impact on social dimension has not been explicitly explored hence further studies need to be undertaken in this area.展开更多
In recent years,human health and user wellbeing have become more important in contemporary society and urban quality.This has been highlighted by the outbreak of the COVID-19 pandemic in the world.Generating open-air ...In recent years,human health and user wellbeing have become more important in contemporary society and urban quality.This has been highlighted by the outbreak of the COVID-19 pandemic in the world.Generating open-air urban spaces constitutes an opportunity to design walkable areas and paths that can produce direct positive effects on environmental health and indirect consequences on“lifestyles”.This design vision can be implemented within small localities where there are still important continuities and long-term relationships between the human scale of public spaces and the sense of place related to historic/traditional infrastructural pathways.The interest of various international research and of the WHO(World Health Organization)itself extends the subject of public health to the relationship of the individual with the environment,and with the rest of the social interactions,considering the latter a factor that can affect the reduction of illnesses.In order to act in the direction of improving people’s health,to determine the conditions for a life free of diseases and disabilities,and to generate cities and common spaces of use capable of encouraging the adoption of healthy and active lifestyles by people of all ages,the research makes a comparison between possible interventions in Italy and Spain.展开更多
A projection of the Canadian population shows that in 2024 one in five Canadians will be over 65 years old. This shift forces designers to consider the entire lifetime of occupants during the design of new buildings. ...A projection of the Canadian population shows that in 2024 one in five Canadians will be over 65 years old. This shift forces designers to consider the entire lifetime of occupants during the design of new buildings. Universal Design (UD), which is a design that accommodates all people to the greatest extent possible and aging in place design that is deeply rooted in the principles of UD, aim to house people irrespective of their age, ability, and chronic health conditions. Building Information Modeling (BIM) significantly helps advance the development of the Architecture, Engineering, and Construction (AEC) industry in a more collaborative and automated way. Integrating BIM and UD allows designers to incorporate UD standards easily and efficiently at the conceptual design stage of buildings by using the functionalities and capabilities of BIM tools. Therefore, this study presents the development of an automated computer model to facilitate the adoption of UD standards and processes. The novelty highlighted in this model resides in the creation of an automated method that employs a newly created plug-in and databases to assist designers to incorporate UD standards at the conceptual stage in a timely and cost-effective manner. Furthermore, the study introduces the methodology consisting of collecting, categorizing, and storing data from various universal design and accessible design guidelines in the developed databases and developing new plug-ins in BIM tool to link the developed databases in order to automate the process of retrieving necessary information and components to help designers and owners select optimal design alternatives based on their predefined criteria.展开更多
In order to transmit more application-oriented talents to the society,and to give full play to the value of vocational college training and education in the society,by taking the practical teaching of architecture maj...In order to transmit more application-oriented talents to the society,and to give full play to the value of vocational college training and education in the society,by taking the practical teaching of architecture major in vocational colleges as an example,this paper analyzes the form of teaching in vocational colleges and the application value of prefabricated building model in the practical teaching.Additionally,the application of the prefabricated building model combined with BIM Technology in the practical teaching of architecture major in vocational colleges as a reference was analyzed in this paper.展开更多
The building sector is the largest consumer of energy in industrial countries. Saving energy in new buildings or building renovations can thus lead to significant global environmental impacts. In this endeavor, buildi...The building sector is the largest consumer of energy in industrial countries. Saving energy in new buildings or building renovations can thus lead to significant global environmental impacts. In this endeavor, building information <span>modeling (BIM) and building energy modeling (BEM) are two important to</span>ols to make the transition to net-zero energy buildings (NZEB). So far, little attention has been devoted, in the literature, to discuss the connection between BIM, BEM, and Life-cycle assessment (LCA), which is the main topic of this article. A literature review of 157 journal articles and conference proceedings published between 1990 and 2020 is presented. This review outlines knowledge gaps concerning BIM, BEM, and environmental impact assessment. It suggests that defining the process with the right technology (at the right time) would result in a more integrated design process (IDP) and bridge current gaps. The most efficient way to improve process and technology is related to the competences of the architects, engineers and constructors (AEC). The review also indicates that the IDP in the early design phases (EDP) is in need of improvement for architects and engineers, where a better connection between design phases, specific levels of development (LOD) and BIM tools is needed. <span>Competences, process and technology are the three main themes addressed in the review. Their relation to design phases and LOD is discussed. The aim </span>is to propose possible solutions to the current hinders in BIM-to-BEM (BIM2BEM) and BIM-for-LCA (BIM4LCA) integration.展开更多
Industry foundation classes(IFC)is an open and neutral data format specification for building information modeling(BIM)that plays a crucial role in facilitating interoperability.With increases in web-based BIM applica...Industry foundation classes(IFC)is an open and neutral data format specification for building information modeling(BIM)that plays a crucial role in facilitating interoperability.With increases in web-based BIM applications,there is an urgent need for fast loading large IFC models on a web browser.However,the task of fully loading large IFC models typically consumes a large amount of memory of a web browser or even crashes the browser,and this significantly limits further BIM applications.In order to address the issue,a method is proposed for dynamically loading IFC models based on spatial semantic partitioning(SSP).First,the spatial semantic structure of an input IFC model is partitioned via the extraction of story information and establishing a component space index table on the server.Subsequently,based on user interaction,only the model data that a user is interested in is transmitted,loaded,and displayed on the client.The presented method is implemented via Web Graphics Library,and this enables large IFC models to be fast loaded on the web browser without requiring any plug-ins.When compared with conventional methods that load all IFC model data for display purposes,the proposed method significantly reduces memory consumption in a web browser,thereby allowing the loading of large IFC models.When compared with the existing method of spatial partitioning for 3D data,the proposed SSP entirely uses semantic information in the IFC file itself,and thereby provides a better interactive experience for users.展开更多
The spread of fire and smoke during a fire incident plays a crucial role in rescuing people from the burning building. So it is important for the decision makers (the head of rescue staff) to get a prediction about th...The spread of fire and smoke during a fire incident plays a crucial role in rescuing people from the burning building. So it is important for the decision makers (the head of rescue staff) to get a prediction about the spread of fire inside the building through computational techniques like numerical fire simulations. But these techniques require advanced mathematical knowledge and are very time consuming. This paper presents a new method which employs a set of pre-simulated and model-based scenarios to find the closest one to the real fire and present its results to the decision makers. For this purpose, we shift the performance consuming numerical fire simulations into a former phase by integration of these simulations into the planning process of the building. This is realized by enhancing the methods of Building Information Modeling (BIM). To provide the fire simulation results during a real case, our new concept includes a scenario database where all simulated fire scenarios will be collected. In a real case, a special search algorithm will go through this database to find the closest pre-simulated fire scenario to the real fire on the basis of reported information from the burning building.展开更多
Proposed by the Chinese Government,China and 16 Central and East European(CEE)countries jointly launched the framework of 16+1 cooperation in 2012.China has actively practiced the concept of openness,inclusiveness and...Proposed by the Chinese Government,China and 16 Central and East European(CEE)countries jointly launched the framework of 16+1 cooperation in 2012.China has actively practiced the concept of openness,inclusiveness and win-win cooperation,putting it into the framework of 16+1 cooperation and making new attempts in constructing a new model of international relations.Over the展开更多
文摘The whole-process project cost management based on building information modeling(BIM)is a new management method,aiming to realize the comprehensive optimization and improvement of project cost management through the application of BIM technology.This paper summarizes and analyzes the whole-process project cost management based on BIM,aiming to explore its application and development prospects in the construction industry.Firstly,this paper introduces the role and advantages of BIM technology in engineering cost management,including information integration,data sharing,and collaborative work.Secondly,the paper analyzes the key technologies and methods of the whole-process project cost management based on BIM,including model construction,data management,and cost control.In addition,the paper also discusses the challenges and limitations of the whole-process BIM project cost management,such as the inconsistency of technical standards,personnel training,and consciousness change.Finally,the paper summarizes the advantages and development prospects of the whole-process project cost management based on BIM and puts forward the direction and suggestions for future research.Through the research of this paper,it can provide a reference for construction cost management and promote innovation and development in the construction industry.
基金Financial support for this research was provided in part by the US Army Corps of Engineers through a subaward from the University of California,San Diego,USA。
文摘Computer vision-based inspection methods show promise for automating post-earthquake building inspections.These methods survey a building with unmanned aerial vehicles and automatically detect damage in the collected images.Nevertheless,assessing the damage′s impact on structural safety requires localizing damage to specific building components with known design and function.This paper proposes a BIM-based automated inspection framework to provide context for visual surveys.A deep learning-based semantic segmentation algorithm is trained to automatically identify damage in images.The BIM automatically associates any identified damage with specific building components.Then,components are classified into damage states consistent with component fragility models for integration with a structural analysis.To demonstrate the framework,methods are developed to photorealistically simulate severe structural damage in a synthetic computer graphics environment.A graphics model of a real building in Urbana,Illinois,is generated to test the framework;the model is integrated with a structural analysis to apply earthquake damage in a physically realistic manner.A simulated UAV survey is flown of the graphics model and the framework is applied.The method achieves high accuracy in assigning damage states to visible structural components.This assignment enables integration with a performance-based earthquake assessment to classify building safety.
基金supported by the Innovation and Entrepreneurship Training Program Topic for College Students of North China University of Technology in 2023.
文摘In order to enhance modeling efficiency and accuracy,we utilized 3D laser point cloud data for indoor space modeling.Point cloud data was obtained with a 3D laser scanner and optimized with Autodesk Recap and Revit software to extract geometric information about the indoor environment.Furthermore,we proposed a method for constructing indoor elements based on parametric components.The research outcomes of this paper will offer new methods and tools for indoor space modeling and design.The approach of indoor space modeling based on 3D laser point cloud data and parametric component construction can enhance modeling efficiency and accuracy,providing architects,interior designers,and decorators with a better working platform and design reference.
文摘随着隔震技术的推广应用以及建筑业信息化水平的持续提升,在隔震工程中对隔震层建筑信息模型(building information modeling, BIM)建模的需求逐渐增长,然而针对性的研究工作相对较少。为此,围绕隔震支座BIM模型的高效建模方法和应用模块开展了研究。首先,综合隔震支座应用情况和力学特性,可将其分为橡胶隔震支座、滑移摩擦隔震支座和其他类型隔震支座,据此提出了隔震支座BIM快速建模模块基本架构;随后,基于Revit和Visual Studio平台开发了三类隔震支座BIM模型的快速建模功能,并实现了连接节点参数化建模和支座批量/手动布置的操作功能;最后,开展了某化工公司的库房隔震加固项目的隔震层BIM模型建模实践,结果表明:利用快速建模模块可将隔震层BIM建模操作从7个步骤降低至2个步骤,且使用过程中对隔震支座构造细节的认知要求相对较低。同时,建成后的BIM模型与实际工程在建筑信息的多个方面具有较好的一致性。相关研究可为建筑和桥梁隔震工程的BIM建模提供参考和借鉴。
基金supported by the National Natural Science Foundation of China(Grant Nos.51991392 and 51922104).
文摘The axial selection of tunnels constructed in the interlayered soft-hard rock mass affects the stability and safety during construction.Previous optimization is primarily based on experience or comparison and selection of alternative values under specific geological conditions.In this work,an intelligent optimization framework has been proposed by combining numerical analysis,machine learning(ML)and optimization algorithm.An automatic and intelligent numerical analysis process was proposed and coded to reduce redundant manual intervention.The conventional optimization algorithm was developed from two aspects and applied to the hyperparameters estimation of the support vector machine(SVM)model and the axial orientation optimization of the tunnel.Finally,the comprehensive framework was applied to a numerical case study,and the results were compared with those of other studies.The results of this study indicate that the determination coefficients between the predicted and the numerical stability evaluation indices(STIs)on the training and testing datasets are 0.998 and 0.997,respectively.For a given geological condition,the STI that changes with the axial orientation shows the trend of first decreasing and then increasing,and the optimal tunnel axial orientation is estimated to be 87.This method provides an alternative and quick approach to the overall design of the tunnels.
基金funded by the Chinese Meteorological Administration (CMA),the Gansu Provincial Meteorological Bureau (GMB),under the direction of the Lanzhou Regional Climate Centre(Natural Science Foundation of China under Grant No.40830957)the Faculty of Forestry and Environmental Management,University of New Brunswick
文摘This paper outlines a methodology to estimate monthly precipitation surfaces at 1-kin resolution for the Upper Shiyang River watershed (USRW) in northwest China. Generation of precipitation maps is based on the application of a four-variable genetic algorithm (GA) trained on 10 years of weather and ancillary data, i.e., surface air temperature, relative humidity, Digital Elevation Model-derived estimates of elevation, and time of year collected at 29 weather stations in west-central Gansu and northern Qinghai province. An observed-to-GA predicted data comparison of 10 years of precipitation collected at the 29 weather stations showed that about 84% of the variability in observed values could be explained by the trained GA, including variability in two independent datasets. Point-comparisons of observed and modeled precipitation along an elevation-rainfall gradient demonstrated near-similar spatiotemporal patterns. A precipitation surface for USRW for July, 2005, was developed with the trained GA and input surfaces of surface air temperature and relative humidity generated from Moderate Resolution Imaging Spectroradiometer sensor (MODIS) products of land surface temperature. Spatial tendencies in predicted maximum and minimum values of surface air temperature, relative humidity, and precipitation within a 2-kin radius circle around selected weather stations were in close agreement with the values measured at the weather stations.
基金This work was supported by the Minerals Research Institute of Western Australia(MRIWA)Mining3 and Peabody Energy.
文摘Proper design of rock bolt support in underground mines is critical to avoid incidents, accidents and loss of production. The traditional design approach only considers the axial(tensile) capacity and this is clearly not the situation in situ, where a rock bolt is subjected to both axial and shear/bending loads which determines its overall performance and failure behaviour. To demonstrate and analyse the shear displacement in bedded roof, scaled physical models of underground excavation were created. From the models it was found that the shear displacement between the layers depends on the vertical roof deformation and thickness of beds. To analyse the effect of combined loading on rock bolt design for suspension and beam building models, analytical methods were used to calculate the required spacing of rock bolt for a given safety factor. Numerical models were then created using Rocscience RS2 software to establish the stresses on the rock bolt. The results show a significant reduction in safety factor for suspension as demonstrated in an example(reduced from 3.5 to 2.0) and beam building(2.0 to 1.36) when the rock bolt capacities are calculated considering the effect of combined loading as opposed to just the axial or shear loads.
基金supported by a grant(No.14DZ2292800,http://www.greengeo.net/)from“Technology Service Platform of Civil Engineering”of Science and Technology Commission of Shanghai Municipality.
文摘Underground pipeline networks constitute a major component of urban infrastructure,and thus,it is imperative to have an efficient mechanism to manage them.This study introduces a secondary development system to efficiently model underground pipeline networks,using the building information modeling(BIM)-based software Revit.The system comprises separate pipe point and tubulation models.Using a Revit application programming interface(API),the spatial position and attribute data of the pipe points are extracted from a pipeline database,and the corresponding tubulation data are extracted from a tubulation database.Using the Family class in Revit API,the cluster in the self-built library of pipe point is inserted into the spatial location and the attribute data is added;in the same way,all pipeline instances in the pipeline system are created.The extension and localization of the model accelerated the modeling speed.The system was then used in a real construction project.The expansion of the model database and rapid modeling made the application of BIM technology in three-dimensional visualization of underground pipeline networks more convenient.Furthermore,it has applications in pipeline engineering construction and management.
文摘Yunnan University of finance and Trade recording to t he statistics of chain’s output of tea, Yunnan province has entered the ranks of the larger ones of the production in China. Yunnan’s tea industry has the natur al resources and the economic effects envied, on the orther hand, Yunnan’s tea m arket has gradually become less and the economic effects have been poor. Through our comprehensive investigation and study, we consider that because the supply chain has seriously been disjointed among production, supply and sale of tea ind ustry in Yunnan, the supply chain of Yunnan’s tea industry need to be reorganize d for the promoting the development of Yunnan’s tea industry. The essence of reengineering of Yunnan’s tea industrial supply chain is to set u p the model of the trailed operation,to strengthen the strategic partnership man agement between the supply chain, to optimize the design of the supply chain and build up and improve the working mechanism for management of the tea industrial supply chain. The structure of Yunnan’s model of tea industrial supply chain: the model of com mercial flow; the model of logistics flow; the model of information flow and the model of cash flow. The solutions and policies for the reorganization of Yunnan’s tea industrial sup ply chain: planning, logistics and distribution and sales. Set up the supporting system of information technology. Build up the control system of production and planning.Improve the working mechanism of Yunnan’s tea industrial supply chain. Implement the engineering of exporting Yunnan’s tea into the markets of other p rovinces and foreign markets. Have many the channels that raise the funds of dev elopment for Yunnan’s tea industry.
基金Sponsored by the Experimental Teaching Reform and Laboratory Construction Project of University of Science and Technology Liaoning in 2015"Experimental Teaching Reform of Form Composition in Basis of Architectural Design"Project of the 13th Five-Year Plan for Education and Science of Liaoning Province in 2016(JG16DB222)
文摘To comply with the strategic goal of "mass entrepreneurship and innovation",universities and col eges adjusted the discipline cultivation objective to be cultivation of innovational and enterprising talents.Innovational and enterprising talents are inseparable from creative thinking,while the cultivation of creative thinking is the basis of cultivation of innovational and enterprising talents.This paper discussed cultivation of students' creative thinking through making building models in basic course of architectural design.Besides,it analyzed the relation between making of building models and creative thinking from divergent thinking,multi-directional thinking,element changing thinking,conversion thinking,and reverse thinking.It is expected to cultivate students' creative thinking through building models,to lay a solid foundation for architectural design courses,and to provide more architectural designers with more solid foundation and creative thinking.
基金Supported by the National High Technology Research and Development Program of China(″863″Program)(2008AA12A205)the Aeronautical Science Foundation of China(2012ZA52001)
文摘A new approach to modifying the stiffness and mass matrices of finite element models is presented to improve the calculation precision.By measuring the mode frequencies and shapes of both of the original and the new structures with changed stiffness and mass,the stiffness and mass matrices of the finite element model can be updated through matrices calculation and solving algebra equations.Taking a multi-freedom model as an example,the relation between the number of the modes and the correction precision of stiffness and mass matrix elements is researched.The facility and precision of the method are totally confirmed especially when the modeling error is known limited to a definite local range.The feasibility of the approach is proven by an effective engineering application to the model updating of a wing piece used in flutter test.
文摘Building Information Modelling (BIM) is a technology and a process that has brought changes in the construction’s traditional procurement system. Kenya lacks contractual guidelines on implementation of BIM;this makes the adoption of BIM slow and difficult. Previous research has identified a gap in contractual relationships, roles and resulting risks. The objectives of this study were to investigate BIM adoption in Nairobi and to investigate the influence of BIM on Engineering Contract Management (ECM)</span><span style="font-family:Verdana;"> in Nairobi Kenya</span><span style="font-family:Verdana;">. The survey research was a descriptive study with 175 responsive questionnaires. Respondents comprised of Civil Engineers, Construction Project Managers, Architects, Quantity Surveyors, Contractors and Facility Managers. Data was collected through self-administered questionnaire and in-depth interview. Descriptive analytics, correlation and Exploratory factor analysis methods were used to analyse quantitative data. Qualitative data was analysed thematically. It emerged that adoption level was at 56.6% and shallow understanding of BIM capabilities remains to be a barrier to its adoption and implementation. It also emerged that BIM improves ECM;when time, cost, quality, collaboration and return on investment improve, ECM becomes easier. Latent factors found in BIM and ECM relationship were Legal Implications, awareness and knowledge, efficiency, versatility, mandate and leadership, and competitiveness. Further, the study found out that BIM influence on ECM demands for establishment of standards, guidelines, policy, legal framework, and regulations, which can be achieved by amending the public procurement act which dictates the operation of all the other standard forms of contract. Further research should be conducted to measure whether the understanding of BIM had positively improved.
文摘Global concerns toward environmental issues have induced growing demand for new approaches in the construction because of its considerable impact on the environment and use of natural resources. Through using construction sustainability tools, methods and techniques, a greener design can be applied during various building phases. In this connection, it is argued that the analytical and integrated models applied by Building Information Modelling (BIM) may also facilitate this process to be performed more efficiently. BIM and construction sustainability are quite different initiatives, but both have received much attention in recent years in the architecture, engineering and construction (AEC) industry. A rigorous analysis of the interactions between them implies that a synergy exists which, if properly it is understood that can be helpful to reduce the environmental impacts of the AEC industry. A BIM-based design model can contribute to sustainability through its three main dimensions which are environmental, economic and social. In this paper, by reviewing the existing literature on BIM and construction sustainability and using a matrix to analyze construction sustainability dimensions and BIM functionalities a number of interactions have been discussed. It can be concluded that despite there are many improvements in implementation of BIM in environmental and economic aspects of sustainability, its potential impact on social dimension has not been explicitly explored hence further studies need to be undertaken in this area.
文摘In recent years,human health and user wellbeing have become more important in contemporary society and urban quality.This has been highlighted by the outbreak of the COVID-19 pandemic in the world.Generating open-air urban spaces constitutes an opportunity to design walkable areas and paths that can produce direct positive effects on environmental health and indirect consequences on“lifestyles”.This design vision can be implemented within small localities where there are still important continuities and long-term relationships between the human scale of public spaces and the sense of place related to historic/traditional infrastructural pathways.The interest of various international research and of the WHO(World Health Organization)itself extends the subject of public health to the relationship of the individual with the environment,and with the rest of the social interactions,considering the latter a factor that can affect the reduction of illnesses.In order to act in the direction of improving people’s health,to determine the conditions for a life free of diseases and disabilities,and to generate cities and common spaces of use capable of encouraging the adoption of healthy and active lifestyles by people of all ages,the research makes a comparison between possible interventions in Italy and Spain.
文摘A projection of the Canadian population shows that in 2024 one in five Canadians will be over 65 years old. This shift forces designers to consider the entire lifetime of occupants during the design of new buildings. Universal Design (UD), which is a design that accommodates all people to the greatest extent possible and aging in place design that is deeply rooted in the principles of UD, aim to house people irrespective of their age, ability, and chronic health conditions. Building Information Modeling (BIM) significantly helps advance the development of the Architecture, Engineering, and Construction (AEC) industry in a more collaborative and automated way. Integrating BIM and UD allows designers to incorporate UD standards easily and efficiently at the conceptual design stage of buildings by using the functionalities and capabilities of BIM tools. Therefore, this study presents the development of an automated computer model to facilitate the adoption of UD standards and processes. The novelty highlighted in this model resides in the creation of an automated method that employs a newly created plug-in and databases to assist designers to incorporate UD standards at the conceptual stage in a timely and cost-effective manner. Furthermore, the study introduces the methodology consisting of collecting, categorizing, and storing data from various universal design and accessible design guidelines in the developed databases and developing new plug-ins in BIM tool to link the developed databases in order to automate the process of retrieving necessary information and components to help designers and owners select optimal design alternatives based on their predefined criteria.
文摘In order to transmit more application-oriented talents to the society,and to give full play to the value of vocational college training and education in the society,by taking the practical teaching of architecture major in vocational colleges as an example,this paper analyzes the form of teaching in vocational colleges and the application value of prefabricated building model in the practical teaching.Additionally,the application of the prefabricated building model combined with BIM Technology in the practical teaching of architecture major in vocational colleges as a reference was analyzed in this paper.
文摘The building sector is the largest consumer of energy in industrial countries. Saving energy in new buildings or building renovations can thus lead to significant global environmental impacts. In this endeavor, building information <span>modeling (BIM) and building energy modeling (BEM) are two important to</span>ols to make the transition to net-zero energy buildings (NZEB). So far, little attention has been devoted, in the literature, to discuss the connection between BIM, BEM, and Life-cycle assessment (LCA), which is the main topic of this article. A literature review of 157 journal articles and conference proceedings published between 1990 and 2020 is presented. This review outlines knowledge gaps concerning BIM, BEM, and environmental impact assessment. It suggests that defining the process with the right technology (at the right time) would result in a more integrated design process (IDP) and bridge current gaps. The most efficient way to improve process and technology is related to the competences of the architects, engineers and constructors (AEC). The review also indicates that the IDP in the early design phases (EDP) is in need of improvement for architects and engineers, where a better connection between design phases, specific levels of development (LOD) and BIM tools is needed. <span>Competences, process and technology are the three main themes addressed in the review. Their relation to design phases and LOD is discussed. The aim </span>is to propose possible solutions to the current hinders in BIM-to-BEM (BIM2BEM) and BIM-for-LCA (BIM4LCA) integration.
基金The study was supported by the National Key R&D Program of China(No.2018YFB0505400)the National Natural Science Foundation of China(No.61472202)+1 种基金the Special Scientific Research Fund of China Railway Corporation(No.J2017X010)the Research on Key Technologies of Virtual Engineering of Railway Engineering Unit Based on BIM Technology(No.K2018G055).
文摘Industry foundation classes(IFC)is an open and neutral data format specification for building information modeling(BIM)that plays a crucial role in facilitating interoperability.With increases in web-based BIM applications,there is an urgent need for fast loading large IFC models on a web browser.However,the task of fully loading large IFC models typically consumes a large amount of memory of a web browser or even crashes the browser,and this significantly limits further BIM applications.In order to address the issue,a method is proposed for dynamically loading IFC models based on spatial semantic partitioning(SSP).First,the spatial semantic structure of an input IFC model is partitioned via the extraction of story information and establishing a component space index table on the server.Subsequently,based on user interaction,only the model data that a user is interested in is transmitted,loaded,and displayed on the client.The presented method is implemented via Web Graphics Library,and this enables large IFC models to be fast loaded on the web browser without requiring any plug-ins.When compared with conventional methods that load all IFC model data for display purposes,the proposed method significantly reduces memory consumption in a web browser,thereby allowing the loading of large IFC models.When compared with the existing method of spatial partitioning for 3D data,the proposed SSP entirely uses semantic information in the IFC file itself,and thereby provides a better interactive experience for users.
文摘The spread of fire and smoke during a fire incident plays a crucial role in rescuing people from the burning building. So it is important for the decision makers (the head of rescue staff) to get a prediction about the spread of fire inside the building through computational techniques like numerical fire simulations. But these techniques require advanced mathematical knowledge and are very time consuming. This paper presents a new method which employs a set of pre-simulated and model-based scenarios to find the closest one to the real fire and present its results to the decision makers. For this purpose, we shift the performance consuming numerical fire simulations into a former phase by integration of these simulations into the planning process of the building. This is realized by enhancing the methods of Building Information Modeling (BIM). To provide the fire simulation results during a real case, our new concept includes a scenario database where all simulated fire scenarios will be collected. In a real case, a special search algorithm will go through this database to find the closest pre-simulated fire scenario to the real fire on the basis of reported information from the burning building.
文摘Proposed by the Chinese Government,China and 16 Central and East European(CEE)countries jointly launched the framework of 16+1 cooperation in 2012.China has actively practiced the concept of openness,inclusiveness and win-win cooperation,putting it into the framework of 16+1 cooperation and making new attempts in constructing a new model of international relations.Over the