Pre-compensation of Friction for CNC Machine Tools through Constructing a Nonlinear Model Predictive Scheme

Nonlinear friction is a dominant factor afecting the control accuracy of CNC machine tools.This paper proposes a friction pre-compensation method for CNC machine tools through constructing a nonlinear model predictive scheme.The nonlinear friction-induced tracking error is frstly modeled and then utilized to establish the nonlinear model predictive scheme,which is subsequently used to optimize the compensation signal by treating the friction-induced tracking error as the optimization objective.During the optimization procedure,the derivative of compensation signal is constrained to avoid vibration of machine tools.In contrast to other existing approaches,the proposed method only needs the parameters of Stribeck friction model and an additional tuning parameter,while fnely identifying the parameters related to the pre-sliding phenomenon is not required.As a result,it greatly facilitates the practical applicability.Both air cutting and real cutting experiments conducted on an in-house developed open-architecture CNC machine tool prove that the proposed method can reduce the tracking errors by more than 56%,and reduce the contour errors by more than 50%.

Parallel Distributed Compensation/H∞Control of Lane‑keeping System Based on the Takagi‑Sugeno Fuzzy Model

Current research on lane-keeping systems ignores the effect of the driver and external resistance on the accuracy of tracking the lane centerline.To reduce the lateral deviation of the vehicle,a lane-keeping control method based on the fuzzy Takagi-Sugeno(T-S)model is proposed.The method adopts a driver model based on near and far visual angles,and a driver-road-vehicle closed-loop model based on longitudinal nonlinear velocity variation,obtaining the expected assist torque with a robust H∞controller which is designed based on parallel distributed compensation and linear matrix inequality.Considering the external influences of tire adhesion and aligning torque when the vehicle is steering,a feedforward compensation control is designed.The electric power steering system is adopted as the actuator for lane-keeping,and active steering redressing is realized by a control motor.Simulation results based on Carsim/Simulink and real vehicle test results demonstrate that the method helps to maintain the vehicle in the lane centerline and ensures driving safety.

A Variable-Parameter-Model-Based Feedforward Compensation Method for Tracking Control

Base on the accurate inverse of a system, the feedforward compensation method can compensate the tracking error of a linear system dramatically. However, many control systems have complex dynamics and their accurate inverses are difficult to obtain. In the paper, a variable parameter model is proposed to describe a system and a multi-step adaptive seeking approach is used to obtain its parameters in real time. Based on the proposed model, a variable-parameter-model-based feedforward compensation method is proposed, and a disturbance observer is used to overcome the influence of the model uncertainty. Theoretical analysis and simulation results show that the variable-parametermodel-based feedforward compensation method can obtain better performance than the traditional feedforward compensation.

Controller Design for Electric Power Steering System Using T-S Fuzzy Model Approach

Pressure ripples in electric power steering （EPS） systems can be caused by the phase lag between the driver s steering torque and steer angle, the nonlinear frictions, and the disturbances from road and sensor noise especially during high-frequency maneuvers. This paper investigates the use of the robust fuzzy control method for actively reducing pressure ripples for EPS systems. Remarkable progress on steering maneuverability is achieved. The EPS dynamics is described with an eight-order nonlinear state-space model and approximated by a Takagi-Sugeno （T-S） fuzzy model with time-varying delays and external disturbances. A stabilization approach is then presented for nonlinear time-delay systems through fuzzy state feedback controller in parallel distributed compensation （PDC） structure. The closed-loop stability conditions of EPS system with the fuzzy controller are parameterized in terms of the linear matrix inequality （LMI） problem. Simulations and experiments using the proposed robust fuzzy controller and traditional PID controller have been carried out for EPS systems. Both the simulation and experiment results show that the proposed fuzzy controller can reduce the torque ripples and allow us to have a good steering feeling and stable driving.

Width Compensation and Correction for the Plan View Pattern Control Function on Plate Mill

Research works on width compensation and correction were carried out in order to eliminate the effects of the PVPC （ plan view pattern control） on width accuracy of plate mill. The thickness correction calculation formula was derived for compensation the width deviation caused by PVPC function, and the formula is unified under the thinning and thickening conditions. In order to improve the width calculation accuracy, width spread calculation process was modified with dividing one large reduction pass to several small reduction calculation steps. The thickness wedge was simplified to rectangle based on the volume constant principle, and the width spread model for PVPC was constructed. The width compensation and correction for the PVPC functions are used for the online control process, and the Product dimension accuracy is improved. With the decrease of Crop losses, the Droduct yield was increased with 0. 2%.

Real-Time Iterative Compensation Framework for Precision Mechatronic Motion Control Systems

With regard to precision/ultra-precision motion systems,it is important to achieve excellent tracking performance for various trajectory tracking tasks even under uncertain external disturbances.In this paper,to overcome the limitation of robustness to trajectory variations and external disturbances in offline feedforward compensation strategies such as iterative learning control(ILC),a novel real-time iterative compensation(RIC)control framework is proposed for precision motion systems without changing the inner closed-loop controller.Specifically,the RIC method can be divided into two parts,i.e.,accurate model prediction and real-time iterative compensation.An accurate prediction model considering lumped disturbances is firstly established to predict tracking errors at future sampling times.In light of predicted errors,a feedforward compensation term is developed to modify the following reference trajectory by real-time iterative calculation.Both the prediction and compen-sation processes are finished in a real-time motion control sampling period.The stability and convergence of the entire control system after real-time iterative compensation is analyzed for different conditions.Various simulation results consistently demonstrate that the proposed RIC framework possesses satisfactory dynamic regulation capability,which contributes to high tracking accuracy comparable to ILC or even better and strong robustness.

Wave Heave Compensation Based on An Optimized Backstepping Control Method

The vessel heave motion caused by wave action increases the difficulty of installing offshore wind equipment.On-board wave heave compensation devices have therefore become increasingly critical in ensuring the stability and safety of the gangway and working platform.This study accordingly improves the compensation effect of such devices by developing a wave heave compensation model and designing an optimized backstepping control method.First,a model of the compensation system including the servo motor and electric cylinder is established by using the mechanism method.Second,a backstepping control method is designed to track the vessel heave motion,and particle swarm optimization is applied to optimize the control parameters.Finally,MATLAB/Simulink is used to simulate the application of the optimized backstepping controller,then regular and irregular heave motions are applied as input to a Stewart platform to evaluate the effectiveness of the control method.The experimental results show that the compensation efficiency provided by the proposed optimized backstepping control method is larger than 75.0%.

Robust model-reference control for descriptor linear systems subject to parameter uncertainties

Robust model-reference control for descriptor linear systems with structural parameter uncertainties is investigated. A sufficient condition for existing a model-reference zero-error asymptotic tracking controller is given. It is shown that the robust model reference control problem can be decomposed into two subproblems： a robust state feedback stabilization problem for descriptor systems subject to parameter uncertainties and a robust compensation problem. The latter aims to find three coefficient matrices which satisfy four matrix equations and simultaneously minimize the effect of the uncertainties to the tracking error. Based on a complete parametric solution to a class of generalized Sylvester matrix equations, the robust compensation problem is converted into a minimization problem with quadratic cost and linear constraints. A numerical example shows the effect of the proposed approach.

基于PI建模和反步滑模控制的主动波浪补偿策略

海上起重船受风、浪、涌影响会产生剧烈的船舶姿态变化,造成起重机和货物的位姿变化,对货物和人员存在安全隐患,波浪补偿平台的稳定性控制能有效减少复杂海况下船舶运动对海上作业安全性、稳定性和精准性的影响,对浮式起重船海上设备精准装载作业极其重要。针对补偿平台的迟滞非线性导致的建模困难和控制不精确问题,本文提出基于PI(Prandtle–Ishlinskii)建模和反步滑模控制的主动波浪补偿策略。首先,通过实验得到补偿系统的迟滞效应曲线,分析系统迟滞环建立PI迟滞模型,并采用递推最小二乘法辨识模型的各个参数,从而求得系统模型。然后,基于李雅普诺夫(Lyapunov)稳定性设计反步控制补偿方法,并结合滑模控制规律加快初始控制速度。最后,将反步滑模法应用于补偿系统,采用MATLAB软件仿真在规则波和不规则波下的响应来验证算法和模型的正确性,并在工控机中用C#编写控制程序,驱动运动控制卡控制伺服电机带动电缸进行补偿运动,同时通过传感器采集系统运动的实时数据,并反馈给工控机形成闭环,以期验证补偿平台在补偿规则波和不规则波下的补偿效果。实验结果表明,所建立的斯图尔特(Stewart)浮式平台中,PI迟滞模型具有良好的精度,反步终端滑模控制算法在Stewart平台的实际控制中能够很好地补偿波浪运动,相比比例–积分–微分控制(PID)、反步法、强化学习等控制方法,反步终端滑模方法能快速较好跟踪期望位移,补偿精度达到0.9729。

基于随机系数Logit模型的专利价值评估研究——以主动降噪技术为例

[研究目的]从分析专利价值入手,通过经济学研究方法围绕专利侵权损害赔偿的标准进行定量研究,为评估专利价值提供有意义的知识增量。[研究方法]基于实证产业组织理论,采用随机系数Logit模型,以无线蓝牙耳机主动降噪(ANC)技术作为研究对象,构建该技术遭受侵权的反事实情形来估计经济指标变化,由此评估专利价值及侵权赔偿比例。[研究结论]专利侵权企业的行为产生了反竞争效应,提升了企业垄断势力,挤占了其他耳机企业的生存空间,也对潜在进入企业形成了进入威胁。蓝牙耳机价格中约有4.06%源于ANC专利标识。如果发生ANC专利侵权,赔偿额度应是侵权企业利润的2.6~2.8倍。该方法利用市场数据在均衡框架下评估专利价值,为相关研究提供了新方向。

采用改进MPC提高储能系统电压暂态特性研究

储能系统通过换流器实现并网运行,常规换流器因为其开关频率低,在采样、计算环节存在延时导致储能系统暂态特性差,甚至引起整个电网不稳定。本文采用模型预测控制MPC(model predictive control)来实现储能系统功率快速响应,避免延时影响。引入功率权重价值函数在有功、无功MPC控制中,计算储能换流器输出电压最优值。针对因为滤波电感参数偏移导致的MPC模型不准确问题,本文采用电感误差补偿控制来提高模型精度。通过Matlab/Simulink仿真和实验来验证本文所提方案可提高储能系统暂态特性,有效消除误差对MPC控制性能的影响。

含模型协同补偿的微电网变换器自抗扰稳压控制

针对直流微电网中双向DC-DC变换器输出端口电压受扰不稳定的问题,提出一种含已知扰动模型描述和未知扰动二阶描述协同补偿的线性自抗扰控制策略,以减小线性扩张状态观测的观测负担、提高其观测精度,并进一步改善自抗扰控制系统的抗扰性能。通过对系统性能的理论分析,说明了该控制策略能改善电压受扰波动的原因。最后,通过仿真和实验对比说明改进型自抗扰控制系统在抗扰性、鲁棒性上均优于电压外环电流内环的PI控制以及传统自抗扰控制。

基于前馈补偿LQR与PID的矿井无轨胶轮车横纵向控制研究

无人驾驶技术是实现无轨胶轮车井下安全、智能、高效运输的重要方案之一,为了提高无人驾驶过程中的轨迹跟踪精度,提出了基于前馈补偿的横向线性二次型调节器(Linear Quadratic Regulator,LQR)与纵向比例积分微分(Proportion Integration Derivative,PID)位移速度调节器相结合的控制策略,实现车辆的横纵向协调控制。通过建立考虑轮胎侧偏特性的2自由度无轨胶轮车动力学模型和跟踪误差模型,并采用井下无轨胶轮车实车参数建立其电机模型,得到车辆的驱动制动输出。利用Carsim和Matlab/Simulink搭建联合仿真环境,分别在井下双车道工况、单车道工况与颠簸路面工况下进行了轨迹跟踪仿真验证。结果表明:在3种工况下车辆轨迹跟踪过程中的最大横向误差仅为5 cm,最大纵向误差仅为10 cm,速度误差控制在1 m/s以内,航向误差范围为±0.1 rad,前轮偏转角变化平稳未出现抖动现象。为验证控制器在井下实际环境下的跟踪性能,使用实验室小车于陕西某井下巷道进行了现场试验验证,结果表明:井下实际巷道下试验结果误差仍在合理范围内,解决了车辆运行过程中的速度和路径的时变问题,反映出该控制器具有较高的精度和较好的稳定性。

基于电压补偿的双端直流配电网电压就地协调控制

双端直流配电网是一种双端电源供电的网络结构,可为直流负荷提供更加稳定和可靠的电源电压。然而,负荷的功率波动和不平衡使线路电压跌落增大,可能导致直流负荷的电压不平衡度和电压偏差指标越限,影响直流负荷的正常运行。文中基于电压源型换流器(VSC)外环电压控制,考虑中线电压补偿,提出基于电压补偿等效模型的直流配电网电压偏差及不平衡度联合抑制策略,实现直流配电网电压就地协调控制。首先,建立双端直流配电网潮流模型,将VSC电压下垂控制引入潮流模型,分析不同控制策略下的电压偏差和不平衡度的特性。其次,在此基础上,以电压最低点为分点获得双端电源供电回路压降的简化等效模型,并利用最小二乘法实现等效阻抗参数辨识,构建双端直流配电网的电压补偿等效模型。以参数辨识结果作为电压外环控制输入,提出考虑中线电压补偿的双端直流配电网电压就地协调控制策略。最后,在MATLAB/Simulink中搭建仿真模型,验证了双端直流配电网潮流模型的正确性和控制策略的有效性。

DAB储能变换器双闭环模型预测控制与PI补偿控制策略研究

针对直流微电网中分布式电源输入输出功率不稳定造成的直流母线电压波动问题,鉴于双有源桥(DAB)储能变换器具有能量双向流动的特点,提出一种基于内模原理的双闭环模型预测控制策略。在分析DAB变换器扩展移相调制原理与特性基础上,重点研究电压外环和电流内环的模型预测控制策略。针对模型预测控制性能依赖电路参数准确度问题,分别从电路主要参数失配对功率传输和直流母线稳压的影响两个角度出发,深入分析模型参数敏感度。最终设置直流母线电压稳态误差灵敏度区,在误差灵敏度区外仅采用双闭环模型预测控制以保证系统的动态响应性能,在误差灵敏度区内采用双闭环模型预测控制和PI补偿控制以消除系统稳态误差。搭建实验平台进行实验验证,结果表明:在系统受到扰动时,DAB储能变换器可实现快速地充放电对系统进行补偿,混合控制策略可快速保持母线电压的稳定,实现系统功率均衡,增强系统抗扰能力。

基于动态理论模型的电液伺服加载前馈补偿复合控制系统

针对一般电液伺服系统存在的非预期负载扰动和非线性干扰等问题,为了提高系统的自适应能力和动态响应的品质,减小系统跟踪和输出响应的误差,提出了一种基于动态理论模型的电液伺服加载前馈补偿复合控制方法。首先,阐释了电液伺服试验台的结构组成及其数学模型,分析了系统力矩控制和位置控制的结构关系;然后,论证了自适应前馈补偿复合控制的伺服原理,阐述了以调速理论模型和实际模型的误差函数作为调速依据的前馈补偿和复合控制的原理和方法;最后,进行了系统仿真,同时为了验证基于动态理论模型的自适应前馈补偿复合控制策略的合理性和有效性,对伺服系统进行了加载试验。研究结果表明:采用该复合控制策略可以精确算出对伺服马达进行转速补偿的基准值和调整参数,系统动态响应速度比采用传统闭环控制算法提高了8%以上;系统控制器自适应能力和抗扰动性能也明显优于采用传统PI闭环控制及模糊PI闭环控制算法的系统;通过对比分析0.2 Hz和0.5 Hz的正弦响应曲线可知,该系统的位置跟踪曲线性能最优,控制精度最高,实际输出值的误差也最小。

复杂地形六轮独立驱动与转向机器人轨迹跟踪与避障控制

为研究六轮移动机器人在复杂地形的运动控制方法,针对六轮独立驱动与转向机器人复杂地形轨迹跟踪问题,提出一种预测控制和动态补偿的控制方法。基于非完整约束的线性六轮移动机器人运动学模型,以模型预测控制算法为基础,引入比例-积分-微分补偿控制器,抑制动态滞后引起的跟踪误差,设计速度与转向角动态反馈补偿,以应对地形扰动对轨迹跟踪的影响。分析机器人运动过程中障碍物的避碰问题,设计可求解避障轨迹的避障规划器,通过轨迹跟踪系统对局部避障轨迹进行跟踪控制,实现机器人的轨迹跟踪和自动避碰。对轨迹跟踪算法和避障算法进行仿真实验。实验结果表明:在典型工况下,机器人可完成凹形斜坡、凸形斜坡和凹凸地形正弦型轨迹跟踪控制和静态与动态障碍物避碰,验证了新方法的有效性。

孤网模式下水轮机调速系统广义预测控制应用方法

针对孤网模式下水电机组PID控制策略鲁棒性差的缺点,提出基于双模型、实时反馈线性化、非线性特性补偿器和广义预测控制器的自适应广义预测控制策略(Adaptive Generalized Predictive Control,AGPC),以实现对水电站全工况实时最优控制。首先基于BP神经网络和改进樽海鞘算法构建高精度非线性水轮机模型,并结合PID控制器、引水系统、随动系统、发电机等模块搭建非线性水轮机调节系统仿真平台,然后通过定量计算揭示广义预测控制器直接应用于非线性水轮机调节系统的不合理性。进一步,结合实时反馈线性化和基于预估控制信号设计的水轮机非线性特性补偿器,提出孤网模式下广义预测控制器在水电站应用策略。最后,搭建了基于AGPC的非线性水轮机调节系统仿真平台,并以某电站真实数据验证了所提控制策略适用性、可靠性以及优良的鲁棒性。

模型预测转矩自抗扰控制下直驱永磁同步发电机最大追踪系统

为了更好地获取风能,构建了一种基于模型预测转矩自抗扰的最大功率追踪控制系统,用于直驱永磁同步发电机(permanent magnet synchronous generator,PMSG)来实现系统的最大输出功率追踪。为了提升PMSG响应性能,增强PMSG抗扰动性能,首先在电流环设计了模型预测转矩控制(model predictive torque control,MPTC),同时在速度环提出了一种参数补偿改进自抗扰控制(active disturbance rejection control,ADRC)策略,该方法继承了ADRC和MPTC的优点,可以很好地处理内部和外部干扰、建模误差和风速变化等不确定性问题,以实现在不同风速下最大功率追踪性能。从仿真结果可知当风速变化较小时所提控制策略转速静态误差几乎为0,传统MPTC控制策略误差为0.2 rad/s;当风速变化较大时所提控制策略转速静态误差较小,传统MPTC控制策略误差达到5 rad/s。研究结果表明所提出的控制方法在最大功率追踪较传统控制器具有更好的动态响应性能以及抗干扰性能。

机械臂负载移动性能与运动调控研究

工业的不断发展对机械臂的负载要求越来越高,而负载的增加会对机械臂末端的精度造成影响.本文以Franka七轴串联机械臂为对象,采用M-DH法和雅可比迭代法对其正、逆运动学展开分析;采用三次函数插值法进行关节空间的轨迹规划.基于拉格朗日方程建立了机械臂的动力学模型,并通过Admas和Simulink联合动力学仿真验证了动力学模型的有效性.最后基于定位控制,对末端位置误差收敛速率、负载质量、控制参数之间的关系展开研究.