Some of Advances on the Error Analysis in the Frequency Domain for a Digital Simulation Model

This paper surveys a number of recent advances in the error analysis in the frequency domain for a digital simulation model. It is emphasized to discuss the errors in characteristic roots and transfer funcnon of the digital simulation model, the frequency domain errors of the data transfers between thesimulation submodels, and some compensation methods for the errors. Some of the questions to be answered are also presented.

Line of sight waypoint guidance for a container ship based on frequency domain identification of Nomoto model of vessel

CIFER software is used to identify steering and roll dynamics of a container ship. In this software, advanced features such as the Chirp-Z transform(CZT) and composite window optimization are applied to the time history of steering and roll dynamics to extract high quality frequency responses. From the extracted frequency responses, two linear transfer functions of Nomoto model are fitted for yaw and roll dynamics of the vessel. Based on the identified Nomoto model, a PID heading controller and a Kalman filter observer are constructed. The simulation results of heading controller for line of sight(LOS) waypoint guidance show excellent tracking of pilot inputs in the presence of wave induced motions and forces.

Goal-oriented error estimation applied to direct solution of steady-state analysis with frequency-domain finite element method

Based on the concept of the constitutive relation error along with the residuals of both the origin and the dual problems, a goal-oriented error estimation method with extended degrees of freedom is developed. It leads to the high quality locM error bounds in the problem of the direct-solution steady-state dynamic analysis with a frequency-domain finite element, which involves the enrichments with plural variable basis functions. The solution of the steady-state dynamic procedure calculates the harmonic response directly in terms of the physical degrees of freedom in the model, which uses the mass, damping, and stiffness matrices of the system. A three-dimensional finite element example is carried out to illustrate the computational procedures.

Acoustic viscoelastic modeling by frequency-domain boundary element method

Earth medium is not completely elastic, with its viscosity resulting in attenuation and dispersion of seismic waves. Most viscoelastic numerical simulations are based on the finite-difference and finite-element methods. Targeted at viscoelastic numerical modeling for multilayered media, the constant-Q acoustic wave equation is transformed into the corresponding wave integral representation with its Green＇s function accounting for viscoelastic coefficients. An efficient alternative for full-waveform solution to the integral equation is proposed in this article by extending conventional frequency-domain boundary element methods to viscoelastic media. The viscoelastic boundary element method enjoys a distinct characteristic of the explicit use of boundary continuity conditions of displacement and traction, leading to a semi-analytical solution with sufficient accuracy for simulating the viscoelastic effect across irregular interfaces. Numerical experiments to study the viscoelastic absorption of different Q values demonstrate the accuracy and applicability of the method.

Frequency-domain generelaized singular peruturbation method for relative error model order reduction

A new mixed method for relative error model order reduction is proposed. In the proposed method the frequency domain balanced stochastic truncation method is improved by applying the generalized singular perturbation method to the frequency domain balanced system in the reduction procedure. The frequency domain balanced stochastic truncation method, which was proposed in [15] and [17] by the author, is based on two recently developed methods, namely frequency domain balanced truncation within a desired frequency bound and inner-outer factorization techniques. The proposed method in ttiis paper is a carry over of the frequency-domain balanced stochastic truncation and is of interest for practical model order reduction because in this context it shows to keep the accuracy of the approximation as high as possible without sacrificing the computational efficiency and important system properties. It is shown that some important properties of the frequency domain stochastic balanced reduction technique are extended to the proposed reduction method by using the concept and properties of the reciprocal systems. Numerical results show the accuracy, simplicity and flexibility enhancement of the method.

BER Performance of Frequency Domain Differential Demodulation OFDM in Flat Fading Channel

A closed form expression for the bit error rate (BER) performance of frequency domaindifferential demodulation(FDDD) for orthogonal frequency division multiplexing system in flat fadingchannel is derived.The performance is evaluated by computer simulation and compared with the timedomain differential demodulation(TDDD).The results indicate that the performance of FDDD is betterthan that of TDDD,and the lower band of BER in the former is lower than that of the latter.

2.5-D modeling of cross-hole electromagnetic measurement by nite element method

A finite element method is developed for simulating frequency domain electromagnetic responses due to a dipole source in the 2-D conductive structures. Computing costs are considerably minimized by reducing the full three-dimensional problem to a series of two-dimensional problems. This is accomplished by transforming the problem into y-wave number （Ky） domain using Fourier transform and the y-axis is parallel to the structural strike. In the Ky domain, two coupled partial differential equations for magnetic field Hy and electric field Ey are derived. For a specific value of Ky, the coupled equations are solved by the finite element method with isoparametric elements in the x-z plane. Application of the inverse Fourier transform to the Ky, domain provides the electric and magnetic fields in real space. The equations derived can be applied to general complex two-dimensional structures containing either electric or magnetic dipole source in any direction. In the modeling of the electromagnetic measurement, we adopted a pseudo-delta function to distribute the dipole source current and circumvent the problem of singularity at the source point. Moreover, the suggested method used isoparametric finite elements to accommodate the complex subsurface formation. For the large scale linear system derived from the discretization of the Maxwell＇s equations, several iterative solvers were used and compared to select the optimal one. A quantitative test of accuracy was presented which compared the finite element results with analytic solutions for a dipole source in homogeneous space for different ranges and different wave numbers Ky. to validate the addressed the effects of the distribution range τ of the homogeneous medium. code and check its effectiveness. In addition, we pseudo-delta function on the numerical results in

Enhancing the resolution of seismic data based on the generalized S-transform

In this paper, we analyze the seismic signal in the time-frequency domain using the generalized S-transform combined with spectrum modeling. Without assuming that the reflection coefficients are random white noise as in the conventional resolution-enhanced techniques, the wavelet which changes with time and frequency was simulated and eliminated. After using the inverse S-transform for the processed instantaneous spectrum, the signal in the time domain was obtained again with a more balanced spectrum and broader frequency band. The quality of seismic data was improved without additional noise.

Error Analysis in Frequency Domain for Linear Multipass Algorithms

Error analysis methods in frequency domain are developed in this paper for determining the characteristic root and transfer function errors when the linear multipass algorithms are used to solve linear differential equations. The relation between the local truncation error in time domain and the error in frequency domain is established, which is the basis for developing the error estimation methods. The error estimation methods for the digital simulation model constructed by using the Runge-Kutta algorithms and the linear multistep predictor-corrector algorithms are also given.

Elimination of the impact of vessels on ocean wave height inversion with X-band wave monitoring radar

Directional wave spectra and integrated wave parameters can be derived from X-band radar sea surface images.A vessel on the sea surface has a significant influence on wave parameter inversions that can be seen as intensive backscatter speckles in X-band wave monitoring radar sea surface images.A novel algorithm to eliminate the interference of vessels in ocean wave height inversions from X-band wave monitoring radar is proposed.This algorithm is based on the characteristics of the interference.The principal components(PCs) of a sea surface image sequence are extracted using empirical orthogonal function(EOF)analysis.The standard deviation of the PCs is then used to identify vessel interference within the image sequence.To mitigate the interference,a suppression method based on a frequency domain geometric model is applied.The algorithm framework has been applied to OSMAR-X,a wave monitoring system developed by Wuhan University,based on nautical X-band radar.Several sea surface images captured on vessels by OSMAR-X are processed using the method proposed in this paper.Inversion schemes are validated by comparisons with data from in situ wave buoys.The root-mean-square error between the significant wave heights(SWH) retrieved from original interference radar images and those measured by the buoy is reduced by 0.25 m.The determinations of surface gravity wave parameters,in particular SWH,confirm the applicability of the proposed method.

Electrical stimulation upregulates angiopoietin-1/Tie-2 mRNA expression in a rat model of focal cerebral ischemia

Angiopoietin-1/tyrosine kinase with immunoglobulin and epidermal growth factor homology domains 2 （Tie-2） is a newly discovered signaling pathway of angiogenesis. Angiogenesis benefits recovery of neurological functions such as swallowing. In the present study, a rat model of dysphagia following stroke was induced by middle cerebral artery occlusion to investigate the influence of low frequency electrical stimulus with bidirectional square waves and triangular waves on angiopoietin-1/-13e-2 mRNA expression. Reverse transcription-polymerase chain reaction results showed that low frequency electrical stimulus significantly improved the neurological scores of the model rats, and increased angiopoietin-1/＇13e-2 mRNA expression. This demonstrates that low frequency electrical stimulation can ameliorate neurological function in rats with focal brain ischemia, potentially through regulation of angiopoietin-1/-13e-2 expression in the angiogenesis pathway.

Impacts of space-time-frequency synchronization errors onwide-band target echo characteristics of bistatic/multistatic radar

Bistatic/multistatic radar has great potential advantages over its monostatic counterpart. However, the separation of a transmitter and a receiver leads to difficulties in locating the target position accurately and guaranteeing space-timefrequency synchronization of the transmitter and the receiver.The error model of space-time-frequency synchronization in a motion platform of bistatic/multistatic radar is studied. The relationship between the space synchronization error and the transmitter platform position, receiver platform position, moving state, and beam pointing error, is analyzed. The effect of space synchronization error on target echo power is studied. The target scattering characteristics are restructured by many separate scattering centers of the target in high frequency regions. Based on the scattering centers model of the radar target, this radar target echo model and the simulation method are discussed. The algorithm of bistatic/multistatic radar target echo accurately reflects the scattering characteristics of the radar target, pulse modulation speciality of radar transmitting signals, and spacetime-frequency synchronization error characteristics between the transmitter station and the receiver station. The simulation of bistatic radar is completed in computer, and the results of the simulation validate the feasibility of the method.

Dynamic Resonant Frequency Bands of Suspension System of Vehicles with Varying Speeds Based on Time⁃Frequency Spectrum

The dynamic responses of suspension system of a vehicle travelling at varying speeds are generally nonstationary random processes,and the non-stationary random analysis has become an important and complex problem in vehicle ride dynamics in the past few years.This paper proposes a new concept,called dynamic frequency domain(DFD),based on the fact that the human body holds different sensitivities to vibrations at different frequencies,and applies this concept to the dynamic assessment on non-stationary vehicles.The study mainly includes two parts,the first is the input numerical calculation of the front and the rear wheels,and the second is the dynamical response analysis of suspension system subjected to non-stationary random excitations.Precise time integration method is used to obtain the vertical acceleration of suspension barycenter and the pitching angular acceleration,both root mean square(RMS)values of which are illustrated in different accelerating cases.The results show that RMS values of non-stationary random excitations are functions of time and increase as the speed increases at the same time.The DFD of vertical acceleration is finally analyzed using time-frequency analysis technique,and the conclusion is obviously that the DFD has a trend to the low frequency region,which would be significant reference for active suspension design under complex driving conditions.

Experimental and Numerical Investigations on Vibration Characteristics of a Loaded Ship Model

In this paper, the vibration characteristics of the structure in the finite fluid domain are analyzed using a coupled finite element method. The added mass matrix is calculated with finite element method （FEM） by 8-node acoustic fluid elements. The vibration characteristics of the structure in the finite fluid domain are calculated combining structure FEM mass matrix. By writing relevant programs, the numerical analysis on vibration characteristics of a submerged cantilever rectangular plate in finite fluid domain and loaded ship model is performed. A modal identification experiment for the loaded ship model in air and in water is conducted and the experiment results verify the reliability of the numerical analysis. The numerical method can be used for further research on vibration characteristics and acoustic radiation problems of the structure in the finite fluid domain.

Dynamic Accuracy Design Method of Ultra-precision Machine Tool

Ultra-precision machine tool is the most important physical tool to machining the workpiece with the frequency domain error requirement, in the design process of which the dynamic accuracy design(DAD) is indispensable and the related research is rarely available. In light of above reasons, a DAD method of ultra-precision machine tool is proposed in this paper, which is based on the frequency domain error allocation.The basic procedure and enabling knowledge of the DAD method is introduced. The application case of DAD method in the ultra-precision flycutting machine tool for KDP crystal machining is described to show the procedure detailedly. In this case, the KDP workpiece surface has the requirements in four different spatial frequency bands, and the emphasis for this study is put on the middle-frequency band with the PSD specifications. The results of the application case basically show the feasibility of the proposed DAD method. The DAD method of ultra-precision machine tool can effectively minimize the technical risk and improve the machining reliability of the designed machine tool. This paper will play an important role in the design and manufacture of new ultra-precision machine tool.

基于修正分数Poynting-Thomson模型的高压XLPE海缆绝缘评估

为利用频域介电谱准确评估高压交联聚乙烯(XLPE)海缆的绝缘状态,建立考虑直流电导率的修正分数Poynting-Thomson模型(分数P-T模型)以解析高压XLPE海缆的介电特性。首先,通过加速老化试验制备不同老化程度的高压XLPE海缆试样,并测得各组老化试样的力学、理化和介电数据。然后,应用修正分数P-T模型对实测介电曲线进行拟合,对比修正前后分数P-T模型表征实测介电曲线的效果。最后,通过仿真探究模型参数对介电曲线的影响规律,构建模型参数与绝缘程度之间的联系,将提出的老化特征参数与断裂伸长率(EAB)进行量化研究。研究结果表明,修正分数P-T模型能够准确拟合出不同老化程度高压XLPE海缆试样的介电曲线,提出的老化特征参数α、ε_(a)、ε_(b)和σ_(dc)可实现对高压XLPE海缆绝缘状态的量化评估。

Dynamic Performance Investigation of A Spar-Type Floating Wind Turbine Under Different Sea Conditions

Both numerical calculation and model test are important techniques to study and forecast the dynamic responses of the floating offshore wind turbine(FOWT). However, both the methods have their own limitations at present. In this study, the dynamic responses of a 5 MW OC3 spar-type floating wind turbine designed for a water depth of 200 m are numerically investigated and validated by a 1:50 scaled model test. Moreover, the discrepancies between the numerical calculations and model tests are obtained and discussed. According to the discussions, it is found that the surge and pitch are coupled with the mooring tensions, but the heave is independent of them. Surge and pitch are mainly induced by wave under wind wave conditions. Wind and current will induce the low-frequency average responses, while wave will induce the fluctuation ranges of the responses. In addition, wave will induce the wavefrequency responses but wind and current will restrain the ranges of the responses.

Design and Analysis of Spatial Modulation Based Orthogonal Time Frequency Space System

In this paper,we design a spatial modulation based orthogonal time frequency space(SMOTFS)system to achieve improved transmission reliability and meet the high transmission rate and highspeed demands of future mobile communications,which fully utilizes the characteristics of spatial modulation(SM)and orthogonal time frequency space(OTFS)transmission.The detailed system design and signal processing of the SM-OTFS system have been presented.The closed-form expressions of the average symbol error rate(ASER)and average bit error rate(ABER)of the SM-OTFS system have been derived over the delay-Doppler channel with the help of the union bounding technique and moment-generating function(MGF).Meanwhile,the system complexity has been evaluated.Numerical results verify the correctness of the theoretical ASER and ABER analysis of the SM-OTFS system in the high signal-to-noise ratio(SNR)regions and also show that the SM-OTFS system outperforms the traditional SM based orthogonal frequency division multiplexing(SM-OFDM)system with limited complexity increase under mobile conditions,especially in high mobility scenarios.

Technical Research for Detector of Grain Moisture Content Based on Error Compensation

According to the existing method including testing the frequency and establishing the relationship between moisture content and frequency, a corresponding instrument was designed. In order to further improve the accuracy and rapidity of the system, a new approach to describe the relationship between the measurement error and the temperature was proposed. The error band could be obtained and divided into several parts（based on the range of temperature） to indicate the error value that should compensate the grain moisture content for the changes in temperature. By calculating the error band at the maximum and the minimum operating temperatures, as well as by determining the error compensation value from the error band based on the measurement moisture content, the final effective result was derived.