Hybrid model for BOF oxygen blowing time prediction based on oxygen balance mechanism and deep neural network

The amount of oxygen blown into the converter is one of the key parameters for the control of the converter blowing process,which directly affects the tap-to-tap time of converter. In this study, a hybrid model based on oxygen balance mechanism (OBM) and deep neural network (DNN) was established for predicting oxygen blowing time in converter. A three-step method was utilized in the hybrid model. First, the oxygen consumption volume was predicted by the OBM model and DNN model, respectively. Second, a more accurate oxygen consumption volume was obtained by integrating the OBM model and DNN model. Finally, the converter oxygen blowing time was calculated according to the oxygen consumption volume and the oxygen supply intensity of each heat. The proposed hybrid model was verified using the actual data collected from an integrated steel plant in China, and compared with multiple linear regression model, OBM model, and neural network model including extreme learning machine, back propagation neural network, and DNN. The test results indicate that the hybrid model with a network structure of 3 hidden layer layers, 32-16-8 neurons per hidden layer, and 0.1 learning rate has the best prediction accuracy and stronger generalization ability compared with other models. The predicted hit ratio of oxygen consumption volume within the error±300 m^(3)is 96.67%;determination coefficient (R^(2)) and root mean square error (RMSE) are0.6984 and 150.03 m^(3), respectively. The oxygen blow time prediction hit ratio within the error±0.6 min is 89.50%;R2and RMSE are0.9486 and 0.3592 min, respectively. As a result, the proposed model can effectively predict the oxygen consumption volume and oxygen blowing time in the converter.

Multi-Model Approach for Assessing the Influence of Calibration Criteria on the Water Balance in Ouémé Basin

Hydrological models are very useful tools for evaluating water resources, and the hydroclimatic hazards associated with the water cycle. However, their calibration and validation require the use of performance criteria which choice is not straightforward. This paper aims to evaluate the influence of the performance criteria on water balance components and water extremes using two global rainfall-runoff models (HBV and GR4J) over the Ouémé watershed at the Bonou and Savè outlets. Three (3) Efficacy criteria (Nash, coefficient of determination, and KGE) were considered for calibration and validation. The results show that the Nash criterion provides a good assessment of the simulation of the different parts of the hydrograph. KGE is better for simulating peak flows and water balance elements than other efficiency criteria. This study could serve as a basis for the choice of performance criteria in hydrological modelling.

Model Predictive Control for Cascaded H-Bridge PV Inverter with Capacitor Voltage Balance

We designed an improved direct-current capacitor voltage balancing control model predictive control(MPC)for single-phase cascaded H-bridge multilevel photovoltaic(PV)inverters.Compared with conventional voltage balanc-ing control methods,the method proposed could make the PV strings of each submodule operate at their maximum power point by independent capacitor voltage control.Besides,the predicted and reference value of the grid-connected current was obtained according to the maximum power output of the maximum power point tracking.A cost function was con-structed to achieve the high-precision grid-connected control of the CHB inverter.Finally,the effectiveness of the proposed control method was verified through a semi-physical simulation platform with three submodules.

Changing and Developing Trend of the Farmland Requisition-Compensation Balance Policy in China

The importance and necessity of implementing the balance system of farmland requisition and compensation are reasoned.The changing path of the balance system of farmland requisition-compensation is overviewed.In addition,the problems exist in the implementation of the balance system of farmland requisition-compensation are analyzed as well,covering the increasing demands on land in the process of economic development;the serious phenomenon of wasting land in urban construction;part of farmlands should be revoked from the perspective of ecological construction and environmental protection,which lead to the shortage of reserved farmland and it is hard to implement the balance system of farmland requisition-compensation;the problems of "occupying more but compensating less,occupying good land but compensating bad land" are universal;the development and reclamation of farmlands have taken certain threats to ecological environment;the differences of various regions have not been taken into consideration in implementing the balance system of farmland requisition-compensation.Some notes on the developing trend of farmlands requisition-compensation balance system are put forward.The farmlands should be occupied after being compensated first,so as to ensure the dynamic balance of the total amount of farmlands;the government should encourage the improvement of farmland with mediocre and low output,so as to enhance its production capability;the potential of urban and rural construction land use should be fully developed and the occupation of farmland should be reduced as few as possible;various aspects should be cooperated to increase the possibility of requisition-compensation among different regions.

Evaluation and prediction of earth pressure balance shield performance in complex rock strata:A case study in Dalian,China

This research explores the potential for the evaluation and prediction of earth pressure balance shield performance based on a gray system model.The research focuses on a shield tunnel excavated for Metro Line 2 in Dalian,China.Due to the large error between the initial geological exploration data and real strata,the project construction is extremely difficult.In view of the current situation regarding the project,a quantitative method for evaluating the tunneling efficiency was proposed using cutterhead rotation(R),advance speed(S),total thrust(F)and torque(T).A total of 80 datasets with three input parameters and one output variable(F or T)were collected from this project,and a prediction framework based gray system model was established.Based on the prediction model,five prediction schemes were set up.Through error analysis,the optimal prediction scheme was obtained from the five schemes.The parametric investigation performed indicates that the relationships between F and the three input variables in the gray system model harmonize with the theoretical explanation.The case shows that the shield tunneling performance and efficiency are improved by the tunneling parameter prediction model based on the gray system model.

Energy Balance-Based SWAT Model to Simulate the Mountain Snowmelt and Runoff——Taking the Application in Juntanghu Watershed(China) as an Example

In order to predict long-term flooding under extreme weather conditions in central Asia, an energy balance-based distributed snowmelt runoff model was developed and coupled with the Soil and Water Assessment Tool(SWAT) model. The model was tested at the Juntanghu watershed on the northern slope of the Tian Shan Mountains, Xinjiang,China. We compared the performances of temperature-index method and energy balanced method in SWAT model by taking Juntanghu river basin as an application example(as the simulation experiment was conducted in Juntanghu River, we call the energy balanced method as SWAT-JTH). The results suggest that the SWAT snowmelt model had overall Nash-Sutcliffe efficiency(NSE) coefficients ranging from 0.61 to 0.85 while the physical based approach had NSE coefficients ranging from 0.58 to0.69. Overall, on monthly scale, the SWAT model provides better results than that from the SWAT-JTH model. However, results generated from both methods seem to be fairly close at a daily scale. Thestructure of the temperature-index method is simple and produces reasonable simulation results if the parameters are well within empirical ranges. Although the data requirement for the energy balance method in current observation is difficult to meet and the existence of uncertainty is associated with the experimental approaches of physical processes, the SWAT-JTH model still produced a reasonably high NSE. We conclude that using temperature-index methods to simulate the snowmelt process is sufficient, but the energy balance-based model is still a good choice to simulate extreme weather conditions especially when the required data input for the model is acquired.

Mass Balance Modeling for Electric Arc Furnace and Ladle Furnace System in Steelmaking Facility in Turkey

In the electric arc furnace （EAF） steel production processes, scrap steel is principally used as a raw material instead of iron ore. In the steelmaking process with EAF, scrap is first melted in the furnace and then the desired chemical composition of the steel can be obtained in a special furnace such as ladle furnace （LF）. This kind of furnace process is used for the secondary refining of alloy steel. LF furnace offers strong heating fluxes and enables precise temperature control, thereby allowing for the addition of desired amounts of various alloying elements. It also provides outstanding desulfurization at high-temperature treatment by reducing molten steel fluxes and removing deoxidation products. Elemental analysis with mass balance modeling is important to know the precise amount of required alloys for the LF input with respect to scrap composition. In present study, chemical reactions with mass conservation law in EAF and LF were modeled altogether as a whole system and chemical compositions of the final steel alloy output can be obtained precisely according to different scrap compositions, alloying elements ratios, and other input amounts. Besides, it was found that the mass efficiency for iron element in the system is 95.93%. These efficiencies are calculated for all input elements as 8. 45% for C, 30.31% for Si, 46.36% for Mn, 30.64% for P, 41.96% for S, and 69.79% for Cr, etc. These efficiencies provide valuable ideas about the amount of the input materials that are vanished or combusted for 100 kg of each of the input materials in the EAF and LF system.

Simplified Homogeneous Balance Method and Its Applications to the Whitham-Broer-Kaup Model Equations

A nonlinear transformation of the Whitham-Broer-Kaup (WBK) model equations in the shallow water small-amplitude regime is derived by using a simplified homogeneous balance method. The WBK model equations are linearized under the nonlinear transformation. Various exact solutions of the WBK model equations are obtained via the nonlinear transformation with the aid of solutions for the linear equation.

A Distributed Monthly Water Balance Model for Analyzing Impacts of Land Cover Change on Flow Regimes

The Miyun Reservoir is the most important water source for Beijing Municipality, the capital of China with a population of more than 12 million. In recent decades, the inflow to the reservoir has shown a decreasing trend, which has seriously threatened water use in Beijing. In order to analyze the influents of land use and cover change (LUCC) upon inflow to Miyun Reservoir, terrain and land use information from remote sensing were utilized with a revised evapotranspiration estimation formula; a water loss model under conditions of human impacts was introduced; and a distributed monthly water balance model was established and applied to the Chaobai River Basin controlled by the Miyun Reservoir. The model simulation suggested that not only the impact of land cover change on evapotranspiration, but also the extra water loss caused by human activities, such as the water and soil conservation development projects should be considered. Although these development projects were of great benefit to human and ecological protection, they could reallocate water resources in time and space, and in a sense thereby influence the stream flow.

CFD simulation of gas–liquid flow in a high-pressure bubble column with a modified population balance model

In this study,based on the Luo bubble coalescence model,a model correction factor C_e for pressures according to the literature experimental results was introduced in the bubble coalescence efficiency term.Then,a coupled modified population balance model(PBM) with computational fluid dynamics(CFD) was used to simulate a high-pressure bubble column.The simulation results with and without C_e were compared with the experimental data.The modified CFD-PBM coupled model was used to investigate its applicability to broader experimental conditions.These results showed that the modified CFD-PBM coupled model can predict the hydrodynamic behaviors under various operating conditions.

Application of the Method of Characteristics to Population Balance Models Considering Growth and Nucleation Phenomena

The population balance modeling is regarded as a universally accepted mathematical framework for dynamic simulation of various particulate processes, such as crystallization, granulation and polymerization. This article is concerned with the application of the method of characteristics (MOC) for solving population balance models describing batch crystallization process. The growth and nucleation are considered as dominant phenomena, while the breakage and aggregation are neglected. The numerical solutions of such PBEs require high order accuracy due to the occurrence of steep moving fronts and narrow peaks in the solutions. The MOC has been found to be a very effective technique for resolving sharp discontinuities. Different case studies are carried out to analyze the accuracy of proposed algorithm. For validation, the results of MOC are compared with the available analytical solutions and the results of finite volume schemes. The results of MOC were found to be in good agreement with analytical solutions and superior than those obtained by finite volume schemes.

SimET: An open-source tool for estimating crop evapotranspiration and soil water balance for plants with multiple growth cycles

Accurate estimation of crop evapotranspiration(ETc) and soil water balance, which is vital for optimizing water management strategy in crop production, can be performed by simulation. But existing software has many deficiencies, including complex operation, limited scalability, lack of batch processing, and a single ETc model. Here we present simET, an open-source software package written in the R programming language. Many concepts involved in crop ETc simulation are condensed into functions in the package. It includes three widely used crop ETc models built on these functions: the single-crop coefficient,double-crop coefficient, and Shuttleworth–Wallace models, along with tools for preparing model data and comparing estimates. SimET supports ETc simulation in crops with repeated growth cycles such as alfalfa, a perennial forage crop that is cut multiple times annually.

Modeling approaches to pressure balance dynamic system in shield tunneling

In order to deal with modeling problem of a pressure balance system with time-delay, nonlinear, time-varying and uncertain characteristics, an intelligent modeling procedure is proposed, which is based on artificial neural network(ANN) and input-output data of the system during shield tunneling and can overcome the precision problem in mechanistic modeling(MM) approach. The computational results show that the training algorithm with Gauss-Newton optimization has fast convergent speed. The experimental investigation indicates that, compared with mechanistic modeling approach, intelligent modeling procedure can obviously increase the precision in both soil pressure fitting and forecasting period. The effectiveness and accuracy of proposed intelligent modeling procedure are verified in laboratory tests.

Analyzing geomorphological and topographical controls for the heterogeneous glacier mass balance in the Sikkim Himalayas

Glacier response patterns at the catchment scale are highly heterogeneous and defined by a complex interplay of various dynamics and surface factors.Previous studies have explained heterogeneous responses in qualitative ways but quantitative assessment is lacking yet where an intrazone homogeneous climate assumption can be valid.Hence,in the current study,the reason for heterogeneous mass balance has been explained in quantitative methods using a multiple linear regression model in the Sikkim Himalayan region.At first,the topographical parameters are selected from previously published studies,then the most significant topographical and geomorphological parameters are selected with backward stepwise subset selection methods.Finally,the contributions of selected parameters are calculated by least square methods.The results show that,the magnitude of mass balance lies between-0.003±0.24 to-1.029±0.24 m.w.e.a^(-1) between 2000 and 2020 in the Sikkim Himalaya region.Also,the study shows that,out of the terminus type of the glacier,glacier area,debris cover,ice-mixed debris,slope,aspect,mean elevation,and snout elevation of the glaciers,only the terminus type and mean elevation of the glacier are significantly altering the glacier mass balance in the Sikkim Himalayan region.Mathematically,the mass loss is approximately 0.40 m.w.e.a^(-1) higher in the lake-terminating glaciers compared to the land-terminating glaciers in the same elevation zone.On the other hand,a thousand meters mean elevation drop is associated with 0.179 m.w.e.a-1of mass loss despite the terminus type of the glaciers.In the current study,the model using the terminus type of the glaciers and the mean elevation of the glaciers explains 76% of fluctuation of mass balance in the Sikkim Himalayan region.

Observation and modelling of snow and sea ice mass balance and its sensitivity to atmospheric forcing during spring and summer 2007 in the Central Arctic

Snow depth and sea ice thickness were observed applying an ice mass balance buoy(IMB)in the drifting ice station Tara during the International Polar Year in 2007.Detailed in situ observations on meteorological variables and surface fluxes were taken during May to August.For this study,the operational analyses and short-term forecasts from two numerical weather prediction(NWP)models(ECMWF and HIRLAM)were extracted for the Tara drift trajectory.We compared the IMB,meteorological and surface flux observations against the NWP products,also applying a one-dimensional thermodynamic sea ice model(HIGHTSI)to calculate the snow and ice mass balance and its sensitivity to atmospheric forcing.The modelled snow depth time series,controlled by NWP-based precipitation,was in line with the observed one.HIGHTSI reproduced well the snowmelt onset,the progress of the melt,and the first date of snow-free conditions.HIGHTSI performed well also in the late August freezing season.Challenges remain to model the“false bottom”observed during the melting season.The evolution of the vertical temperature profiles in snow and ice was better simulated when the model was forced by in situ observations instead of NWP results.During the melting period,the nonlinear ice temperature profile was successfully modelled with both forcing options.During spring and the melting season,total sea ice mass balance was most sensitive to uncertainties in NWP results for the downward longwave radiation,followed by the downward shortwave radiation,air temperature,and wind speed.

Balance of Datum Land Prices Among Cities Based on the City Gravitation Model and Stochastic Diffusion Equation

A balance of urban datum land prices is achieved to harmonize regional land prices and make the prices truly reflect different economic development levels and land prices among cities. The current piecewise linear interpolation balance method widely used has two drawbacks that always lead to an unsatisfactory balance among some cities. When the excess of land price in the central city to the surrounding zone reaches a certain degree, land price in the circumjacent city is not only consistent with the local land grade and land use level, but also influenced by the diffusion of land price in the central city. Thus, a new balanced scheme of datum land prices based on the city gravitation model and stochastic diffusion equation is brought forward. Finally, the new method is examined in the practice of datum land price balance in Hubei Province, China.

Modelling Wave Transmission and Overtopping Based on Energy Balance Equation

Wave transmission and overtopping around nearshore breakwaters can have significant influence on the transmitted wave parameters,which affects wave conditions and sediment transportation and becomes the focus of design in engineering.The objective of this paper is to present a simplified model to estimate these important wave parameters.This paper describes the incorporation of wave transmission and overtopping module into a wave model for multi-directional random wave transformation based on energy balance equation with the consideration of wave shoaling,refraction,diffraction,reflection and breaking.Wen's frequency spectrum and non-linear dispersion relation are also included in this model.The influence of wave parameters of transmitted waves through a smooth submerged breakwater has been considered in this model with an improved description of the transmitted wave spectrum of van der Meer et al.(2000) by Carevic et al.(2013).This improved wave model has been validated through available laboratory experiments.Then the verified model is applied to investigate the effect of wave transmission and overtopping on wave heights behind low-crested breakwaters in a project for nearshore area.Numerical calculations are carried out with and without consideration of the wave transmission and overtopping,and comparison of them indicates that there is a considerable difference in wave height and thus it is important to include wave transmission and overtopping in modelling nearshore wave field with the presence of low-crested breakwaters.Therefore,this model can provide a general estimate of the desired wave field parameters,which is adequate for engineers at the preliminary design stage of low-crested breakwaters.

Source Apportionment of Ambient PM_(10) in the Urban Area of Longyan City,China:a Comparative Study Based on Chemical Mass Balance Model and Factor Analysis Method

In order to identify the day and night pollution sources of PM10 in ambient air in Longyan City,the authors analyzed the elemental composition of respirable particulate matters in the day and night ambient air samples and various pollution sources which were collected in January 2010 in Longyan with inductivity coupled plasma-mass spectrometry（ICP-MS）.Then chemical mass balance（CMB） model and factor analysis（FA） method were applied to comparatively study the inorganic components in the sources and receptor samples.The results of factor analysis show that the major sources were road dust,waste incineration and mixed sources which contained automobile exhaust,soil dust/secondary dust and coal dust during the daytime in Longyan City,China.There are two major sources of pollution which are soil dust and mixture sources of automobile exhaust and secondary dust during the night in Longyan.The results of CMB show that the major sources are secondary dust,automobile exhaust and road dust during the daytime in Longyan.The major sources are secondary dust,soil dust and automobile exhaust during the night in Longyan.The results of the two methods are similar to each other and the results will guide us to plan to control the PM10 pollution sources in Longyan.

A Population Balance Model for Disperse Systems:Particle Size Distribution in Suspension Polymerization

On the basis of population balance a mathematical model is developed to describe the formation of polymer particle in styrene suspension polymerization. The characteristics of coalescence and breakage of droplets and the gel effect are analyzed in particular. Parameters of the models are estimated by experimental data on reaction conversion and particle size distribution. The results show that the model is suitable for predicting polymerization processes.

BALANCED TRUNCATED MODELS OF C INTERCONNECT CIRCUITS AND THEIR SIMULATION

The Balanced Truncation Method (BTM) is applied to an even distributed RC interconnect case by using Wang's closed-forms of even distributed RC interconnect models. The results show that extremely high order RC interconnect can be high-accurately approximated by only third order balanced model. Related simulations are executed in both time domain and frequency domain. The results may be applied to VLSI interconnect model reduction and design.