Biomechanical Study of Different Scaffold Designs for Reconstructing a Traumatic Distal Femur Defect Using Patient-Specific Computational Modeling

Reconstruction of a traumatic distal femur defect remains a therapeutic challenge.Bone defect implants have been proposed to substitute the bone defect,and their biomechanical performances can be analyzed via a numerical approach.However,the material assumptions for past computational human femur simulations were mainly homogeneous.Thus,this study aimed to design and analyze scaffolds for reconstructing the distal femur defect using a patient-specific finite element modeling technique.A three-dimensional finite element model of the human femur with accurate geometry and material distribution was developed using the finite element method and material mapping technique.An intact femur and a distal femur defect model treated with nine microstructure scaffolds and two solid scaffolds were investigated and compared under a single-leg stance loading.The results showed that the metal solid scaffold design could provide the most stable fixation for reconstructing the distal femur defect.However,the fixation stability was affected by various microstructure designs and pillar diameters.A microstructure scaffold can be designed to satisfy all the biomechanical indexes,opening up future possibilities for more stable reconstructions.A three-dimensional finite element model of the femur with real bone geometry and bone material distribution can be developed,and this patient-specific femur model can be used for studying other femoral fractures or injuries,paving the way for more comprehensive research in the field.Besides,this patient-specific finite element modeling technique can also be applied to developing other human or animal bone models,expanding the scope of biomechanical research.

OptoGPT: A foundation model for inverse design in optical multilayer thin film structures

Optical multilayer thin film structures have been widely used in numerous photonic applications.However,existing inverse design methods have many drawbacks because they either fail to quickly adapt to different design targets,or are difficult to suit for different types of structures,e.g.,designing for different materials at each layer.These methods also cannot accommodate versatile design situations under different angles and polarizations.In addition,how to benefit practical fabrications and manufacturing has not been extensively considered yet.In this work,we introduce OptoGPT(Opto Generative Pretrained Transformer),a decoder-only transformer,to solve all these drawbacks and issues simultaneously.

Product family modeling technology for customized cosmetic packaging design based on basic-element theory

Background:As the market demands change,SMEs(small and medium-sized enterprises)have long faced many design issues,including high costs,lengthy cycles,and insufficient innovation.These issues are especially noticeable in the domain of cosmetic packaging design.Objective:To explore innovative product family modeling methods and configuration design processes to improve the efficiency of enterprise cosmetic packaging design and develop the design for mass customization.Methods:To accomplish this objective,the basic-element theory has been introduced and applied to the design and development system of the product family.Results:By examining the mapping relationships between the demand domain,functional domain,technology domain,and structure domain,four interrelated models have been developed,including the demand model,functional model,technology model,and structure model.Together,these models form the mechanism and methodology of product family modeling,specifically for cosmetic packaging design.Through an analysis of a case study on men’s cosmetic packaging design,the feasibility of the proposed product family modeling technology has been demonstrated in terms of customized cosmetic packaging design,and the design efficiency has been enhanced.Conclusion:The product family modeling technology employs a formalized element as a module configuration design language,permeating throughout the entire development cycle of cosmetic packaging design,thus facilitating a structured and modularized configuration design process for the product family system.The application of the basic-element principle in product family modeling technology contributes to the enrichment of the research field surrounding cosmetic packaging product family configuration design,while also providing valuable methods and references for enterprises aiming to elevate the efficiency of cosmetic packaging design for the mass customization product model.

Optimization method of reef structure design based on hydrodynamic model

Artificial fish reef is a kind of artificial structure in water,which provides a necessary and safe place for aquatic life such as fish to inhabit,grow,and breed,and creates an environment suitable for fish growth,so as to protect and multiply fishery resources.In a large time scale,the physical process of sea area can deeply affect the chemical process and biological process,so the structure characteristics of artificial reef are the key factors affecting the flow field effect around the reef.In this study,through the hydrodynamic experiments of four kinds of reef models,including big windows box reef,big and small windows box reef,"(卐)"shaped reef and double-layer shellfish breeding reef,the influence of single reef structure on the flow field effect is analyzed,and the force conditions of different reefs under the same incoming current velocity are obtained.According to the simulation results,the safety research and calculation of five kinds of reef models are carried out,and the volumes of vortex area and upwelling area behind four kinds of reef are obtained.Using hydrodynamic model to simulate the flow field effect of reef area,optimizing the reef structure design,improving the maximum biological trapping and proliferation effect of reef,can provide theoretical guidance and scientific and technological support for the construction of reef area.

Model-Based Systems Engineering Approach to Design a Human Settlement to Better Serve Displaced People

The challenge of transitioning from temporary humanitarian settlements to more sustainable human settlements is due to a significant increase in the number of forcibly displaced people over recent decades, difficulties in providing social services that meet the required standards, and the prolongation of emergencies. Despite this challenging context, short-term considerations continue to guide their planning and management rather than more integrated, longer-term perspectives, thus preventing viable, sustainable development. Over the years, the design of humanitarian settlements has not been adapted to local contexts and perspectives, nor to the dynamics of urbanization and population growth and data. In addition, the current approach to temporary settlement harms the environment and can strain limited resources. Inefficient land use and ad hoc development models have compounded difficulties and generated new challenges. As a result, living conditions in settlements have deteriorated over the last few decades and continue to pose new challenges. The stakes are such that major shortcomings have emerged along the way, leading to disruption, budget overruns in a context marked by a steady decline in funding. However, some attempts have been made to shift towards more sustainable approaches, but these have mainly focused on vague, sector-oriented themes, failing to consider systematic and integration views. This study is a contribution in addressing these shortcomings by designing a model-driving solution, emphasizing an integrated system conceptualized as a system of systems. This paper proposes a new methodology for designing an integrated and sustainable human settlement model, based on Model-Based Systems Engineering and a Systems Modeling Language to provide valuable insights toward sustainable solutions for displaced populations aligning with the United Nations 2030 agenda for sustainable development.

Modeling of biodiesel production: Performance comparison of Box–Behnken, face central composite and full factorial design

The performances of the response surface methodology(RSM)in connection with the Box–Behnken,face central composite or full factorial design(BBD,FCCD or FFD,respectively)were compared for the use in modeling of the NaOH-catalyzed sunflower oil ethanolysis.The influence of temperature,catalyst loading,and ethanol-to-oil molar ratio(EOMR)on fatty acid ethyl esters(FAEE)content was evaluated.All three multivariate strategies were efficient in the statistical modeling and optimization of the influential process variables but BBD and FCCD realization involved less number of experiments,generating smaller costs,requiring less work and consuming shorter time than the corresponding FFD.All three designs resulted in the same optimal catalyst loading(1.25%of oil)and EOMR(12:1).The reduced two-factorinteraction(2 FI)models based on the BBD and FCCD defined a range of optimal reaction temperature(25℃–75℃)and 25℃,respectively while the same model based on the 33 FFD appointed 75℃.The predicted FAEE content of about 97%–98.0%was close to the experimentally obtained FAEE content of about 97.0%–97.6%under the optimal reaction conditions.Therefore,the simpler BBD or FCCD might successfully be applied for statistical modeling of biodiesel production processes instead of the more extensive,more laborious and more expensive FFD.

Study of the ship design process model for collaborative design

The ship design process model is the basis for developing the ship collaborative design system under network environment.According to the characteristics of the ship design, a method for dividing the ship design process into three layers is pat forward, that is project layer, design task layer and design activity layer, then the formalized definitions of the ship design process model, the decomposing principles of the ship design process and the architecture of the ship collaborative design (SDPM) system are presented. This method simplifies the activity network, makes the optimization and adjustment of the design plan convenient and also makes the design process easier to control and change, at last the architecture of the ship collaborative design system is discussed.

Structural Analysis and Design of Steel Connections Using Component-Based Finite Element Model

This paper introduces CBFEM （component-based finite element model） which is a new method to analyze and design connections of steel structures. Design focused CM （component model） is compared to FEM （finite elements models）. Procedure for composition of a model based on usual production process is used in CBFEM. Its results are compared to those obtained by component method for portal frame eaves moment connection with good agreement. Design of moment resistant column base is demonstrated by a case loaded by two directional bending moments and normal force. Interaction of several connections in one complex joint is explained in the last example. This paper aims to provide structural engineers with a new tool to effectively analyze and design various joints of steel structures.

Output Voltage Model and Mechanical-Magnetic Design of Magnetostrictive Vibration Energy Harvester with a Rotating Up-Frequency Structure1

A vibration energy harvester can harvest vibration energy in the environment and convert it into electrical energy to power the sensors in the Internet of Things.Human walking contains high-quality vibration energy,which serves as the energy source for vibration energy harvesters due to its abundant availability,high energy conversion efficiency,and environmental friendliness.It is difficult to harvest human walking vibration due to its low frequency.Converting the low-frequency vibration of human walking into high-frequency vibration has attracted attention.In previous studies,vibration energy harvesters typically increase frequency by raising excitation frequency or inducing free vibration.When walking frequency changes,the up-frequency method of raising the excitation frequency changes the voltage frequency,resulting in the best load resistance change and reducing the output power.The up-frequency method of inducing free vibration does not increase the external excitation frequency,which has relatively low output power.This paper designs a magnetostrictive vibration energy harvester with a rotating up-frequency structure.It consists of a rotating up-frequency structure,a magnetostrictive structure,coils,and bias magnets.The main body of the rotating up-frequency structure comprises a torsion bar and a flywheel with a dumbbell-shaped hole.The magnetostrictive structure includes four magnetostrictive metal sheets spliced by Galfenol and steel sheets.The torsion bar and flywheel interact to convert low-frequency linear vibration into rotating high-frequency excitation vibration of the flywheel.The flywheel plucks the magnetostrictive metal sheet with a high excitation frequency to generate free vibration.The vibration energy harvester increases the excitation frequency while inducing free vibration,which can effectively improve the output power.To characterize the excitation vibration and free vibration,based on the theory of Euler-Bernoulli beam theory,the vibration equation of the magnetostrictive metal sheet after being excited is given.According to the classical machine-magnetic coupling model and the Jiles-Atherton physical model,the relationship between stress and magnetization strength is derived.Combined with Faraday's law of electromagnetic induction,the distributed dynamic output voltage model is established.This model can predict the output voltage at different excitation frequencies.Based on this model,the mechanical-magnetic structural parameter optimization design is carried out.The parameters of the magnetostrictive metal sheet,the bias magnet,and the rotating up-frequency structure are determined.A comprehensive experimental system is established to test the device.The peak-to-peak voltage and output voltage signal by the proposed model are compared.The average relative deviation of the peak-to-peak voltage and the output voltage signal is 4.9%and 8.2%,respectively.The experimental results show that the output power is proportional to the excitation frequency.The optimum load resistance is always 800Ωas the excitation frequency changes,simplifying the impedance-matching process.The maximum peak-to-peak voltage of the device is 58.60 V,the maximum root mean square(RMS)voltage is 9.53 V,and the maximum RMS power is 56.20 mW.The magnetostrictive vibration energy harvester with a rotating up-frequency structure solves the problem of impedance matching,which improves the output power.The proposed distributed dynamic output voltage model can effectively predict the output characteristics.This study can provide structural and theoretical guidance for up-frequency structure vibration energy harvesters for human walking vibration.

Prediction Model-based Multi-objective Optimization for Mix-ratio Design of Recycled Aggregate Concrete

The prediction model for mechanical properties of RAC was established through the Bayesian optimization-based Gaussian process regression(BO-GPR)method,where the input variables in BO-GPR model depend on the mix ratio of concrete.Then the compressive strength prediction model,the material cost,and environmental factors were simultaneously considered as objectives,while a multi-objective gray wolf optimization algorithm was developed for finding the optimal mix ratio.A total of 730 RAC datasets were used for training and testing the predication model,while the optimal design method for mix ratio was verified through RAC experiments.The experimental results show that the predicted,testing,and expected compressive strengths are nearly consistent,illustrating the effectiveness of the proposed method.

A fuzzy compensation-Koopman model predictive control design for pressure regulation in proten exchange membrane electrolyzer

Proton exchange membrane(PEM)electrolyzer have attracted increasing attention from the industrial and researchers in recent years due to its excellent hydrogen production performance.Developing accurate models to predict their performance is crucial for promoting and accelerating the design and optimization of electrolysis systems.This work developed a Koopman model predictive control(MPC)method incorporating fuzzy compensation for regulating the anode and cathode pressures in a PEM electrolyzer.A PEM electrolyzer is then built to study pressure control and provide experimental data for the identification of the Koopman linear predictor.The identified linear predictors are used to design the Koopman MPC.In addition,the developed fuzzy compensator can effectively solve the Koopman MPC model mismatch problem.The effectiveness of the proposed method is verified through the hydrogen production process in PEM simulation.

Implementation of a Sketch Based Approach to Conceptual Aircraft Design Synthesis and Modeling

In the context of applying computer aided design tools to aircraft conceptualdesign, a sketch based approach is proposed to help designers turn their original concepts intocomplex numerical models that are usable for further analysis and optimization. This approachemphasizes the integration of general configuration and the layout of such components as engines,payloads, fuel tanks and landing gears, and the representation of a design scheme as uniform planesketches and three dimensional models. This paper presents the measures adopted to implement theapproach in a prototype system, including the object-oriented data structure, friendly graphicaluser interfaces and basic features of relevant modules. Several examples generated in the prototypeand applications of the results are finally outlined to illustrate the effectiveness of theapproach.

A data-adaptive network design for the regional gravity field modelling using spherical radial basis functions

A high-precision regional gravity field model is significant in various geodesy applications.In the field of modelling regional gravity fields,the spherical radial basis functions(SRBFs)approach has recently gained widespread attention,while the modelling precision is primarily influenced by the base function network.In this study,we propose a method for constructing a data-adaptive network of SRBFs using a modified Hierarchical Density-Based Spatial Clustering of Applications with Noise(HDBSCAN)algorithm,and the performance of the algorithm is verified by the observed gravity data in the Auvergne area.Furthermore,the turning point method is used to optimize the bandwidth of the basis function spectrum,which satisfies the demand for both high-precision gravity field and quasi-geoid modelling simultaneously.Numerical experimental results indicate that our algorithm has an accuracy of about 1.58 mGal in constructing the gravity field model and about 0.03 m in the regional quasi-geoid model.Compared to the existing methods,the number of SRBFs used for modelling has been reduced by 15.8%,and the time cost to determine the centre positions of SRBFs has been saved by 12.5%.Hence,the modified HDBSCAN algorithm presented here is a suitable design method for constructing the SRBF data adaptive network.

Computer-based Creativity Enhanced Conceptual Design Model for Non-routine Design of Mechanical Systems

Computer-based conceptual design for routine design has made great strides, yet non-routine design has not been given due attention, and it is still poorly automated. Considering that the function-behavior-structure（FBS） model is widely used for modeling the conceptual design process, a computer-based creativity enhanced conceptual design model（CECD） for non-routine design of mechanical systems is presented. In the model, the leaf functions in the FBS model are decomposed into and represented with fine-grain basic operation actions（BOA）, and the corresponding BOA set in the function domain is then constructed. Choosing building blocks from the database, and expressing their multiple functions with BOAs, the BOA set in the structure domain is formed. Through rule-based dynamic partition of the BOA set in the function domain, many variants of regenerated functional schemes are generated. For enhancing the capability to introduce new design variables into the conceptual design process, and dig out more innovative physical structure schemes, the indirect function-structure matching strategy based on reconstructing the combined structure schemes is adopted. By adjusting the tightness of the partition rules and the granularity of the divided BOA subsets, and making full use of the main function and secondary functions of each basic structure in the process of reconstructing of the physical structures, new design variables and variants are introduced into the physical structure scheme reconstructing process, and a great number of simpler physical structure schemes to accomplish the overall function organically are figured out. The creativity enhanced conceptual design model presented has a dominant capability in introducing new deign variables in function domain and digging out simpler physical structures to accomplish the overall function, therefore it can be utilized to solve non-routine conceptual design problem.

Inbound Open Innovation, Business Model Design and Firm Innovation Performance

Through systematic literature review,this study constructs a relationship model of the impact of inbound open innovation on firm innovation performance,and introduced two-dimensional business model design(novelty and efficiency)as mediation variables.It is preliminary confirmed theoretically that inbound open innovation has a positive impact on firm innovation performance,and the rationality of business model playing a mediation role in the relationship between inbound open innovation and innovation performance.Through questionnaire survey and empirical analysis,it is concluded that inbound open innovation has a positive impact on firm innovation performance;Two-dimensional business model design(novelty and efficiency)play a completely positive mediation role in the relationship between inbound open innovation and innovation performance.Based on these findings,this paper developed recommendations for future research.

Hybrid Data-Driven and Mechanistic Modeling Approaches for Multiscale Material and Process Design

The world’s increasing population requires the process industry to produce food,fuels,chemicals,and consumer products in a more efficient and sustainable way.Functional process materials lie at the heart of this challenge.Traditionally,new advanced materials are found empirically or through trial-and-error approaches.As theoretical methods and associated tools are being continuously improved and computer power has reached a high level,it is now efficient and popular to use computational methods to guide material selection and design.Due to the strong interaction between material selection and the operation of the process in which the material is used,it is essential to perform material and process design simultaneously.Despite this significant connection,the solution of the integrated material and process design problem is not easy because multiple models at different scales are usually required.Hybrid modeling provides a promising option to tackle such complex design problems.In hybrid modeling,the material properties,which are computationally expensive to obtain,are described by data-driven models,while the well-known process-related principles are represented by mechanistic models.This article highlights the significance of hybrid modeling in multiscale material and process design.The generic design methodology is first introduced.Six important application areas are then selected:four from the chemical engineering field and two from the energy systems engineering domain.For each selected area,state-ofthe-art work using hybrid modeling for multiscale material and process design is discussed.Concluding remarks are provided at the end,and current limitations and future opportunities are pointed out.

A Win-Win Undergraduate Graduation Design Model for Students, Teachers, and Training Platforms

Undergraduate graduation design is an important link in the process of undergraduate training,and university platforms have invested a lot of manpower and material resources for this purpose.However,while carrying out student training,it has gradually become the consensus of most university platforms to achieve a win-win situation for teachers and training platforms in order to achieve optimization of resource allocation and motivation of student training.After discussion and practice,this paper proposes a set of undergraduate graduation design training concepts and training modes with a win-win situation for students,teachers,and training platforms.

Exploration of the Inheritance and Innovation Carrier of National Culture in the Teaching Model of Art Design Major in Higher Vocational Colleges:Integrating Lijiang Baisha Murals into Higher Vocational Art Design Curriculum System

This study aims to further promote the inheritance and innovative development of intangible cultural heritage in Yunnan Province,promote the protection,inheritance,integration,and innovation of ethnic culture in Lijiang,strengthen the protection and inheritance of Baisha murals in Lijiang,and change the teaching of art design majors in vocational colleges in Yunnan.Given the lack of traditional Chinese culture and local ethnic culture,this article focuses on the teaching of art design majors in Yunnan vocational colleges.It explores the construction model of the cultural inheritance and innovation carrier of Lijiang Baisha murals to meet the spiritual and cultural needs of the local people,and efforts will be made to promote the high-quality development of the Baisha ethnic area in Lijiang.

Modeling Boundary and Edge Effect of Chloride Diffusion for Durability Design of Concrete Structures Exposed in Marine Environment

According to the Fick＇s second law of diffusion, six analytical solutions of chloride profile in concrete were studied and discussed with regard to different boundary and initial conditions. In those analytical solutions, the most prevailing error-function solution which is based on semi-infinite assumption is the simple one, but may under-estimate the chloride content in concrete and over-rate the life time prediction of concrete structures. The experimental results show that compared with other solutions, the chloride content in concrete predicted by error-function model is the minimum, and the calculation difference produced by different analytical models should not be ignored. The influence of models on chloride content prediction is more than other environment and material coefficients in some time. In order to get a more realistic prediction model, modification to error-function model is suggested based on analysis and calculation examples concerning the boundary and edge effect.

A Building Information Modeling-Life Cycle Cost Analysis Integrated Model to Enhance Decisions Related to the Selection of Construction Methods at the Conceptual Design Stage of Buildings

Life Cycle Cost Analysis (LCCA) provides a systematic approach to assess the total cost associated with owning, operating, and maintaining assets throughout their entire life. BIM empowers architects and designers to perform real-time evaluations to explore various design options. However, when integrated with LCCA, BIM provides a comprehensive economic perspective that helps stakeholders understand the long-term financial implications of design decisions. This study presents a methodology for developing a model that seamlessly integrates BIM and LCCA during the conceptual design stage of buildings. This integration allows for a comprehensive evaluation and analysis of the design process, ensuring that the development aligns with the principles of low carbon emissions by employing modular construction, 3D concrete printing methods, and different building design alternatives. The model considers the initial construction costs in addition to all the long-term operational, maintenance, and salvage values. It combines various tools and data through different modules, including energy analysis, Life Cycle Assessment (LCA), and Life Cycle Cost Analysis (LCCA) to execute a comprehensive assessment of the financial implications of a specific design option throughout the lifecycle of building projects. The development of the said model and its implementation involves the creation of a new plug-in for the BIM tool (i.e., Autodesk Revit) to enhance its functionalities and capabilities in forecasting the life-cycle costs of buildings in addition to generating associated cash flows, creating scenarios, and sensitivity analyses in an automatic manner. This model empowers designers to evaluate and justify their initial investments while designing and selecting potential construction methods for buildings, and enabling stakeholders to make informed decisions by assessing different design alternatives based on long-term financial considerations during the early stages of design.