Physical Model of Drying Shrinkage of Recycled Aggregate Concrete

We prepared concretes（RC0, RC30, and RC100） with three different mixes. The poresize distribution parameters of RAC were examined by high-precision mercury intrusion method（MIM） and nuclear magnetic resonance（NMR） imaging. A capillary-bundle physical model with random-distribution pores（improved model, IM） was established according to the parameters, and dry-shrinkage strain values were calculated and verified. Results show that in all pore types, capillary pores, and gel pores have the greatest impacts on concrete shrinkage, especially for pores 2.5-50 and 50-100 nm in size. The median radii are 34.2, 31, and 34 nm for RC0, RC30, and RC100, respectively. Moreover, the internal micropore size distribution of RC0 differs from that of RC30 and RC100, and the pore descriptions of MIM and NMR are consistent both in theory and in practice. Compared with the traditional capillary-bundle model, the calculated results of IM have higher accuracy as demonstrated by experimental verifi cation.

Experimental study on behavior of mortar-aggregate interface after elevated temperatures

A push-out test program was designed and conducted to study the meso-scale behavior of mortaraggregate interface for concrete after elevated temperatures ranging from 20℃ to 600℃ with the concept of modeled concrete （MC） and modeled recycled aggregate concrete （MRAC）. The MCs and MRACs were designed with different strength grade of mortar and were exposed to different elevated temperatures. Following that the specimens were cooled to room temperature and push-out tests were conducted. Failure process and mechanical behaviors were analyzed based on failure modes, residual load-displacement curves, residual peak loads and peak displacements. It is found that failure modes significantly depended on specimen type, the elevated temperature and the strength grade of mortar. For MC, major cracks started to propagate along the initial cracks caused by elevated temperatures at about 80% of residual peak load. For MRAC, the cracks appeared at a lower level of load with the increasing elevated temperatures. The cracks connected with each other, formed a failure face and the specimens were split into several parts suddenly when reaching the residual peak load. Residual load-displacement curves of different specimens had similarities in shape. Besides, effect of temperatures and strength grade of mortar on residual peak load and peak displacement were analyzed. For MC and MRAC with higher strength of new hardened mortar, the residual peak load kept constant when the temperature is lower than 400℃ and dropped by 43.5% on average at 600℃. For MRAC with lower strength of new hardened mortar, the residual peak load began to reduce when the temperatures exceeded 200℃ and reduced by 27.4% and 60.8% respectively at 400℃ and 600℃. The properties of recycled aggregate concrete （RAC） may be more sensitive to elevated temperatures than those of natural aggregate concrete （NAC） due to the fact that the interracial properties of RAC are lower than those of NAC, and are deteriorated at lower temperatures.