An improved typhoon monitoring model based on precipitable water vapor and pressure

The potential of monitoring the movement of typhoons using the precipitable water vapor(PWV) has been confirmed. However, monitoring the movement of typhoon is focused on PWV, making it difficult to describe the movement of a typhoon in detail minutely and resulting in insufficient accuracy. Hence,based on PWV and meteorological data, we propose an improved typhoon monitoring mode. First, the European Centre for Medium-Range Weather Forecasts Reanalysis 5-derived PWV(ERA5-PWV) and the Global Navigation Satellite System-derived PWV(GNSS-PWV) were compared with the reference radiosonde PWV(RS-PWV). Then, using the PWV and atmospheric parameters derived from ERA5, we discussed the anomalous variations of PWV, pressure(P), precipitation, and wind speed during different typhoons. Finally, we compiled a list of critical factors related to typhoon movement, PWV and P. We developed an improved multi-factor typhoon monitoring mode(IMTM) with different models(i.e.,IMTM-I and IMTM-II) in different cases with a higher density of GNSS observation or only Numerical Weather Prediction(NWP) data. The IMTM was evaluated through the reference movement speeds of HATO and Mangkhut from the China Meteorological Observatory Typhoon Network(CMOTN). The results show that the root mean square(RMS) of the IMTM-I is 1.26 km/h based on ERA5-P and ERA5-PWV,and the absolute bias values are mostly within 2 km/h. Compared with the models considering the single factor ERA5-P/ERA5-PWV, the RMS of the IMTM-I is improved by 26.3% and 38.5%, respectively. The IMTM-II model manifests a residual of only 0.35 km/h. Compared with the single-factor model based on GNSS-PWV/P, the residual of the IMTM-II model is reduced by 90.8% and 84.1%, respectively. These results propose that the typhoon movement monitoring approach combining PWV and P has evident advantages over the single-factor model and is expected to supplement traditional typhoon monitoring.

An Experimental Analysis of Gas-Liquid Flow Breakdown in a T-Junction

When a gas-liquid two-phase flow(GLTPF)enters a parallel separator through a T-junction,it generally splits unevenly.This phenomenon can seriously affect the operation efficiency and safety of the equipment located downstream.In order to investigate these aspects and,more specifically,the so-called bias phenomenon(all gas and liquid flowing to one pipe,while the other pipe is a liquid column that fluctuates up and down),laboratory experiments were carried out by using a T-junction connected to two parallel vertical pipes.Moreover,a GLTPF prediction model based on the principle of minimum potential energy was introduced.The research results indicate that this model can accurately predict the GLTPF state in parallel risers.The boundary of the slug flow and the churn flow in the opposite pipe can be predicted.Overall,according to the results,the pressure drop curves of the two-phase flow in the parallel risers are basically the same when there is no bias phenomenon,but the pressure drop in the parallel riser displays a large deviation when there is a slug flow-churn flow.Only when the parallel riser is in a state of asymmetric flow and one of the risers produces churn flow,the two-phase flow is prone to produce the bias phenomenon.

Research and application of composite stochastic resonance in enhancement detection

Aiming at the problem that the intermediate potential part of the traditional bistable stochastic resonance model cannot be adjusted independently, a new composite stochastic resonance(NCSR) model is proposed by combining the Woods–Saxon(WS) model and the improved piecewise bistable model. The model retains the characteristics of the independent parameters of WS model and the improved piecewise model has no output saturation, all the parameters in the new model have no coupling characteristics. Under α stable noise environment, the new model is used to detect periodic signal and aperiodic signal, the detection results indicate that the new model has higher noise utilization and better detection effect.Finally, the new model is applied to image denoising, the results showed that under the same conditions, the output peak signal-to-noise ratio(PSNR) and the correlation number of NCSR method is higher than that of other commonly used linear denoising methods and improved piecewise SR methods, the effectiveness of the new model is verified.

Structural Characteristics and Evolution of a Weighted Sino-US Container Shipping Network

This study selected the Sino-US route data from the top 30 global container liner companies between December 1,2019,and December 29,2019,as the data source utilizing the complex network research methodology.It constructs a Sino-US container shipping network through voyage weighting and analyzes the essential structural characteristics to explore the network’s complex structural fea-tures.The network’s evolution is examined from three perspectives,namely,time,space,and event influence,aiming to comprehens-ively explore the network’s evolution mechanism.The results revealed that:1)the weighted Sino-US container shipping network exhib-its small-world and scale-free properties.Key hub ports in the United States include NEW YORK NY,SAVANNAH GA,LOS ANGELES CA,and OAKLAND CA,whereas SHANGHAI serving as the hub port in China.The geographical distribution of these hub ports is uneven.2)Concerning the evolution of the weighted Sino-US container shipping network,from a temporal perspective,the evolution of the regional structure of the entire Sino-US region and the Inland United States is in a stage of radiative expansion and de-velopment,with a need for further enhancement in competitiveness and development speed.The evolution of the regional structure of southern China and Europe is transitioning from the stage of radiative expansion and development to an advanced equilibrium stage.The shipping development in Northern China,the Western and Eastern United States,and Asia is undergoing significant changes but faces challenges of fierce competition and imbalances.From a spatial perspective,the rationality and effectiveness of the improved weighted Barrat-Barthelemy-Vespignani(BBV)model are confirmed through theoretical derivation.The applicability of the improved evolution model is verified by simulating the evolution of the weighted Sino-US container shipping network.From an event impact per-spective,the Corona Virus Disease 2019(COVID-19)pandemic has not fundamentally affected the spatial pattern of the weighted Sino-US container shipping network but has significantly impacted the network’s connectivity.The network lacks sufficient resilience and stability in emergency situations.3)Based on the analysis of the structural characteristics and evolution of the weighted Sino-US con-tainer shipping network,recommendations for network development are proposed from three aspects:emphasizing the development of hub ports,focusing on the balanced development of the network,and optimizing the layout of Chinese ports.

Improved frequency modeling and solution for parallel liquid-filled pipes considering both fluid-structure interaction and structural coupling

The dynamic characteristics of a single liquid-filled pipe have been broadly studied in the previous literature.The parallel liquid-filled pipe(PLFP)system is also widely used in engineering,and its structure is more complex than that of a single pipe.However,there are few reports about the dynamic characteristics of the PLFPs.Therefore,this paper proposes improved frequency modeling and solution for the PLFPs,involving the logical alignment principle and coupled matrix processing.The established model incorporates both the fluid-structure interaction(FSI)and the structural coupling of the PLFPs.The validity of the established model is verified by modal experiments.The effects of some unique parameters on the dynamic characteristics of the PLFPs are discussed.This work provides a feasible method for solving the FSI of multiple pipes in parallel and potential theoretical guidance for the dynamic analysis of the PLFPs in engineering.

Dissipation source function and an improvement to LAGFD-WAM model

In this paper, a new theoretical expression of dissipation term is presented on the basis of statistical model of breaking wave, which is an improvement to LAGFD-WAM wave model. The computational results in three typical wind fields show a good improvement to LAGFD-WAM model and a better accuracy in comparison with the observed data in the South China Sea.

Modeling the effects of extreme high-temperature stress at anthesis and grain filling on grain protein in winter wheat

Extreme high-temperature stress(HTS) associated with climate change poses potential threats to wheat grain yield and quality. Wheat grain protein concentration(GPC) is a determinant of wheat quality for human nutrition and is often neglected in attempts to assess climate change impacts on wheat production. Crop models are useful tools for quantification of temperature impacts on grain yield and quality.Current crop models either cannot simulate or can simulate only partially the effects of HTS on crop N dynamics and grain N accumulation. There is a paucity of observational data on crop N and grain quality collected under systematic HTS scenarios to develop algorithms for model improvement as well as evaluate crop models. Two-year phytotron experiments were conducted with two wheat cultivars under HTS at anthesis, grain filling, and both stages. HTS significantly reduced total aboveground N and increased the rate of grain N accumulation, while total aboveground N and the rate of grain N accumulation were more sensitive to HTS at anthesis than at grain filling. The observed relationships between total aboveground N, rate of grain N accumulation, and HTS were quantified and incorporated into the WheatGrow model. The new HTS routines improved simulation of the dynamics of total aboveground N, grain N accumulation, and GPC by the model. The improved model provided better estimates of total aboveground N, grain N accumulation, and GPC under HTS(the normalized root mean square error was reduced by 40%, 85%, and 80%, respectively) than the original WheatGrow model. The improvements in the model enhance its applicability to the assessment of climate change effects on wheat grain quality by reducing the uncertainties of simulating N dynamics and grain quality under HTS.

Reflections on Improvement of Utility Model System in China

Even since 1985 when the Patent Law was launched in China, the utility model patent has been playing a very important role. Over the two decades, the utility model system has played an active part in encouraging invention-creations, and promoting the progress and development of science and technology.

Research on Plant Species Identification Based on Improved Convolutional Neural Network

Plant species recognition is an important research area in image recognition in recent years.However,the existing plant species recognition methods have low recognition accuracy and do not meet professional requirements in terms of recognition accuracy.Therefore,ShuffleNetV2 was improved by combining the current hot concern mechanism,convolution kernel size adjustment,convolution tailoring,and CSP technology to improve the accuracy and reduce the amount of computation in this study.Six convolutional neural network models with sufficient trainable parameters were designed for differentiation learning.The SGD algorithm is used to optimize the training process to avoid overfitting or falling into the local optimum.In this paper,a conventional plant image dataset TJAU10 collected by cell phones in a natural context was constructed,containing 3000 images of 10 plant species on the campus of Tianjin Agricultural University.Finally,the improved model is compared with the baseline version of the model,which achieves better results in terms of improving accuracy and reducing the computational effort.The recognition accuracy tested on the TJAU10 dataset reaches up to 98.3%,and the recognition precision reaches up to 93.6%,which is 5.1%better than the original model and reduces the computational effort by about 31%compared with the original model.In addition,the experimental results were evaluated using metrics such as the confusion matrix,which can meet the requirements of professionals for the accurate identification of plant species.

THE RIEMANN PROBLEM WITH DELTA INITIAL DATA FOR THE NON-ISENTROPIC IMPROVED AW-RASCLE-ZHANG MODEL

In this paper,we study the Radon measure initial value problem for the nonisentropic improved Aw-Rascle-Zhang model.For arbitrary convex F(u)in this model we construct the Riemann solutions by elementary waves andδ-shock waves using the method of generalized characteristic analysis.We obtain the solutions constructively for initial data containing the Dirac measure by taking the limit of the solutions for that with three piecewise constants.Moreover,we analyze different kinds of wave interactions,including the interactions of theδ-shock waves with elementary waves.

Detection of Citrus Psyllid Based on Improved YOLOX Model

[Objectives]The paper was to explore a faster and more accurate detection method for citrus psyllid to prevent and control yellow-shoot disease and inhibit its transmission.[Methods]We used an improved YOLOX based edge detection method for psyllid,added Convolutional Block Attention Module(CBAM)to the backbone network,and further extracted important features in the channel and space dimensions.The Cross Entropy Loss in the object loss was changed to Focal Loss to further reduce the missed detection rate.[Results]The algorithm described in the study fitted in with the detection platform of psyllid.The data set of psyllid was taken in Lianjiang Orange Garden,Zhanjiang City,Guangdong Province,deeply adapted to the actual needs of agricultural and rural development.Based on YOLOX model,the backbone network and loss function were improved to achieve a more excellent detection method of citrus psyllid.The AP value of 85.66%was obtained on the data set of citrus psyllid,which was 2.70%higher than that of the original model,and the detection accuracies were 8.61%,4.32%and 3.62%higher than that of YOLOv3,YOLOv4-Tiny and YOLOv5-s,respectively,which had been greatly improved.[Conclusions]The improved YOLOX model can better identify citrus psyllid,and the accuracy rate has been improved,laying a foundation for the subsequent real-time detection platform.

Improvement of cloud microphysical parameterization and its advantages in simulating precipitation along the Sichuan-Xizang Railway

The Sichuan-Xizang Railway is an important part of the railway network in China, and geological disasters, such as mountain floods and landslides, frequently occur in this region. Precipitation is an important cause of these disasters;therefore,accurate simulation of the precipitation in this region is highly important. In this study, the descriptions for uncertain processes in the cloud microphysics scheme are improved;these processes include cloud droplet activation, cloud-rain autoconversion, rain accretion by cloud droplets, and the entrainment-mixing process. In the default scheme, the cloud water content of different sizes corresponds to the same cloud droplet concentration, which is inconsistent with the actual content;this results in excessive cloud droplet size, unreasonable related conversion rates of microphysical process(such as cloud-rain autoconversion), and an overestimation of precipitation. Our new scheme overcomes the problem of excessive cloud droplet size. The processes of cloudrain autoconversion and rain accretion by cloud droplets are similar to the stochastic collection equation, and the mixing mechanism of cloud droplets is more consistent with that occurred during the actual physical process in the cloud. Based on the new and old schemes, multiple precipitation processes in the flood season of 2021 along the Sichuan-Xizang Railway are simulated, and the results are evaluated using ground observations and satellite data. Compared to the default scheme, the new scheme is more suitable for the simulation of cloud physics, reducing the simulation deviation of the liquid water path and droplet radius from 2 times to less than 1 time and significantly alleviating the overestimation of precipitation intensity and range of precipitation center. The average root-mean-square error is reduced by 22%. Our results can provide a scientific reference for improving precipitation forecasting and disaster prevention in this region.

Integrated identification method of rheological model of sandstone in Sanmenxia bauxite

Based on the uniaxial compression creep experiments conducted on bauxite sandstone obtained from Sanmenxia,typical creep experiment curves were obtained.From the characteristics of strain component of creep curves,the creep strain is composed of instantaneous elastic strain,ε（me）,instantaneous plastic strain,ε（mp）,viscoelastic strain,ε（ce）,and viscoplastic strain,ε（cp）.Based on the characteristics of instantaneous plastic strain,a new element of instantaneous plastic rheology was introduced,instantaneous plastic modulus was defined,and the modified Burgers model was established.Then identification of direct screening method in this model was completed.According to the mechanical properties of rheological elements,one- and three-dimensional creep equations in different stress levels were obtained.One-dimensional model parameters were identified by the method of least squares,and in the process of computation,Gauss-Newton iteration method was applied.Finally,by fitting the experimental curves,the correctness of direct method model was verified,then the examination of posterior exclusive method of the model was accomplished.The results showed that in the improved Burgers models,the rheological characteristics of sandstone are embodied properly,microscopic analysis of creep curves is also achieved,and the correctness of comprehensive identification method of rheological model is verified.

Assessment of South Pacific Albacore Stock (Thunnus alalunga) by Improved Schaefer Model

Based on catch and effort data of tuna longline fishery operating in the South Pacific Ocean, the South Pacific albacore stock was assessed by an improved Schaefer model. The results revealed that the intrinsic growth rate was about 1.283 74 and carrying capacities vareied in the range from 73 734 to 266 732 metric tons. The growth ability of this species is remarkable. Stock dynamics mainly depends on environmental conditions. The stock is still in good condition. However, the continuous decreasing of biomass in recent years should be noticed.

Triaxial creep tests of weak sandstone from fracture zone of high dam foundation

The lithology of fracture zone which was developed at the dam foundation of a hydropower station is weak sandstone with poor integrity and pore cementation contact.Its creep properties have a significant impact on the deformation and stability of the dam.Based on the characteristics of loose organizational structure,high moisture content and poor mechanical properties,the triaxial compression tests and creep tests were carried out,respectively.The results show significant non-linear,low strength and no obvious strength peaks.Both axial and lateral strains are achieved more than 3%when the tests are failed.The weak sandstone has a significant creep property,but only transient and steady state appear under low stress.Increased stress causes creep intensified and lateral strain gradually exceeds axial strain.In the failure stage,it has characteristics of large axial plastic deformation,obvious volumetric ductility dilation and large steady creep rate.The accelerated creep appears shortly after transient loading under confining of pressures 1.0 MPa and 1.5 MPa.Therefore,an improved Burgers creep model considering the non-linear characteristics of weak sandstone is built based on hyperbolic equation and the creep parameters are identified.This model can well describe the creep properties of weak sandstone.

A Comparative Study of Methods for Delineating Sphere of Urban Influence: A Case Study on Central China

A number of urban and regional plans have been developed with the advancement of urbanization and regional integration, among which the delineation of sphere of urban influence and improvement of integration between the city and its hinterland have be- come vital important for guiding practices. In terms of delineating sphere of urban influence, existing studies have been focused on static study by using single year data or single method, resulting in a lack of time-series longitudinal analysis or comprehensive analysis based on multiple methods This study emphasizes on comparing two methods from both the theoretical and empirical perspective. Both gravity model and improwd field model are applied to the selected study area for measurements and comparison, to explore their strengths and weaknesses. A research framework for comprehensive analysis on delineating sphere of urban influence is proposed. In the end, the differences of deli：aeating methods are illustrated and the feasibility of comprehensive analysis is discussed. Recommendations are provided for selecting appropriate methods for delineating sphere of urban influence or developing regional hierarchy system plans and urban spatial structure schemes.

Improved AHP–TOPSIS model for the comprehensive risk evaluation of oil and gas pipelines

A comprehensive and objective risk evaluation model of oil and gas pipelines based on an improved analytic hierarchy process(AHP)and technique for order preference by similarity to an ideal solution(TOPSIS)is established to identify potential hazards in time.First,a barrier model and fault tree analysis are used to establish an index system for oil and gas pipeline risk evaluation on the basis of five important factors:corrosion,external interference,material/construction,natural disasters,and function and operation.Next,the index weight for oil and gas pipeline risk evaluation is computed by applying the improved AHP based on the five-scale method.Then,the TOPSIS of a multi-attribute decision-making theory is studied.The method for determining positive/negative ideal solutions and the normalized equation for benefit/cost indexes is improved to render TOPSIS applicable for the comprehensive risk evaluation of pipelines.The closeness coefficient of oil and gas pipelines is calculated by applying the improved TOPSIS.Finally,the weight and the closeness coefficient are combined to determine the risk level of pipelines.Empirical research using a long-distance pipeline as an example is conducted,and adjustment factors are used to verify the model.Results show that the risk evaluation model of oil and gas pipelines based on the improved AHP–TOPSIS is valuable and feasible.The model comprehensively considers the risk factors of oil and gas pipelines and provides comprehensive,rational,and scientific evaluation results.It represents a new decision-making method for systems engineering in pipeline enterprises and provides a comprehensive understanding of the safety status of oil and gas pipelines.The new system engineering decision-making method is important for preventing oil and gas pipeline accidents.

Corpus Augmentation for Improving Neural Machine Translation

The translation quality of neural machine translation(NMT)systems depends largely on the quality of large-scale bilingual parallel corpora available.Research shows that under the condition of limited resources,the performance of NMT is greatly reduced,and a large amount of high-quality bilingual parallel data is needed to train a competitive translation model.However,not all languages have large-scale and high-quality bilingual corpus resources available.In these cases,improving the quality of the corpora has become the main focus to increase the accuracy of the NMT results.This paper proposes a new method to improve the quality of data by using data cleaning,data expansion,and other measures to expand the data at the word and sentence-level,thus improving the richness of the bilingual data.The long short-term memory(LSTM)language model is also used to ensure the smoothness of sentence construction in the process of sentence construction.At the same time,it uses a variety of processing methods to improve the quality of the bilingual data.Experiments using three standard test sets are conducted to validate the proposed method;the most advanced fairseq-transformer NMT system is used in the training.The results show that the proposed method has worked well on improving the translation results.Compared with the state-of-the-art methods,the BLEU value of our method is increased by 2.34 compared with that of the baseline.

Comprehensive Assessment of Seawater Quality Based on an Improved Attribute Recognition Model

The attribute recognition model (ARM) has been widely used to make comprehensive assessment in many engineering fields, such as environment, ecology, and economy. However, large numbers of experiments indicate that the value of weight vector has no relativity to its initial value but depends on the data of Quality Standard and actual samples. In the present study, the ARM is enhanced with the technique of data driving, which means some more groups of data from the Quality Standard are selected with the uniform random method to make the calculation of weight values more rational and more scientific. This improved attribute recognition model (IARM) is applied to a real case of assessment on seawater quality. The given example shows that the IARM has the merits of being simple in principle, easy to operate, and capable of producing objective results, and is therefore of use in evaluation problems in marine environment science.

A multi-objective decision-making method for the treatment scheme of landslide hazard

The treatment engineering of landslide hazard is a complicated systemengineering. The selecting treatment scheme is influenced by many factors such as technology,economics, environment, and risk. The decision-making of treatment schemes of landslide hazard is aproblem of comprehensive judgment with multi-hierarchy and multi-objective. The traditional analysishierarchy process needs identity test. The traditional analysis hierarchy process is improved bymeans of optimal transfer matrix here. An improved hierarchy decision-making model for the treatmentof landslide hazard is set up. The judgment matrix obtained by the method can naturally meet therequirement of identity, so the identity test is not necessary. At last, the method is applied tothe treatment decision-making of the dangerous rock mass at the Slate Mountain, and its applicationis discussed in detail.