MoS_(2)/CuS composite catalysts were successfully synthesized using a one-step hydrothermal method with sodium molybdate dihydrate,thiourea,oxalic acid,and copper nitrate trihydrate as raw materials.The hydrogen pro-d...MoS_(2)/CuS composite catalysts were successfully synthesized using a one-step hydrothermal method with sodium molybdate dihydrate,thiourea,oxalic acid,and copper nitrate trihydrate as raw materials.The hydrogen pro-duction performance of MoS_(2)/CuS prepared with different molar ratios of Mo to Cu precursors(n_(Mo)∶n_(Cu))as cathodic catalysts was investigated in the two-chamber microbial electrolytic cell(MEC).X-ray diffraction(XRD),X-ray pho-toelectron spectroscopy(XPS),scanning electron microscopy(SEM),transmission electron microscope(TEM),linear scanning voltammetry(LSV),electrochemical impedance analysis(EIS),and cyclic voltammetry(CV)were used to characterize the synthesized catalysts for testing and analyzing the hydrogen-producing performance.The results showed that the hydrogen evolution performance of MoS_(2)/CuS-20%(nMo∶nCu=5∶1)was better than that of platinum(Pt)mesh,and the hydrogen production rate of MoS_(2)/CuS-20%as a cathode in MEC was(0.2031±0.0237)m^(3)_(H_(2))·m^(-3)·d^(-1) for 72 h at an applied voltage of 0.8 V,which was slightly higher than that of Pt mesh of(0.1886±0.0134)m^(3)_(H_(2))·m^(-3)·d^(-1).The addition of a certain amount of CuS not only regulates the electron transfer ability of MoS_(2) but also increases the density of active sites.展开更多
The MoS_(2)-based materials are a vital class of heterogeneous catalysts for the hydrodeoxygenation of lignin and its model compounds to produce value-added chemicals especially because of their unique selectivity to ...The MoS_(2)-based materials are a vital class of heterogeneous catalysts for the hydrodeoxygenation of lignin and its model compounds to produce value-added chemicals especially because of their unique selectivity to aromatics.The rational design of MoS_(2)-based catalyst greatly depends on the comprehensive understanding of its structure-activity relationship.However,an intensive summary and critical analysis are still scarce to date.In this review,we attempt to provide an in-depth understanding of the interplay of structure,catalysis,and stability of MoS_(2)-based catalysts for lignin hydrodeoxygenation.The recognition of intrinsic active sites on MoS_(2) structure was firstly discussed,followed by the illustration of MoS_(2)-catalyzed hydrodeoxygenation structural models.Afterward,based on the studies on the MoS_(2)-catalyzed lignin model compounds hydrodeoxygenation,the current active site modification strategies including structural modification of monometallic MoS_(2) catalysts and collaborative modification were summarized and emphatically discussed,which aims to elucidate the structure-activity relationship at the atomic-level.The deactivation mechanism and stabilization strategies were also illustrated to provide instructive suggestion for the rational design of efficient and stable MoS_(2)-based catalysts.Finally,the real lignin depolymerization over MoS_(2)-based catalysts was summarized to point out the advantages and difficulties.This review attempts to highlight the remaining challenges and provide some perspectives for the future development of MoS_(2)-based catalysts for lignin hydrodeoxygenation.展开更多
g3(green gas for gird)环保气体(C_(4)F_(7)N/CO_(2)混合)作为SF_(6)最具潜力的新型环保绝缘替代气体,近几年来受到了广泛关注.通过分析g3气体绝缘组合开关设备中的分解组分来检测局部放电、过热等缺陷故障,对于电力设备运行状态的评...g3(green gas for gird)环保气体(C_(4)F_(7)N/CO_(2)混合)作为SF_(6)最具潜力的新型环保绝缘替代气体,近几年来受到了广泛关注.通过分析g3气体绝缘组合开关设备中的分解组分来检测局部放电、过热等缺陷故障,对于电力设备运行状态的评估和诊断具有重要作用.本文提出利用Si原子掺杂改性来提高MoS_(2)的气敏和吸附性能,并基于密度泛函理论(DFT)的计算方法,通过吸附能、电荷转移、态密度和局部态密度等参数指标,探究了本征MoS_(2)、Si改性MoS_(2)(Si-MoS_(2))对g3气体典型分解组分—COF_(2)、CF_(4)、CF_(3)CN的吸附气敏机理.分析表明Si原子在MoS_(2)表面具有稳定的掺杂结构,相比本征MoS_(2),Si原子改性之后的MoS_(2)的导电性得到了有效增强;Si-MoS_(2)对COF_(2)、CF_(4)气体表现出强化学吸附作用,对CF_(3)CN为弱物理吸附,吸附强度CF_(4)>COF_(2)>CF_(3)CN,且在吸附过程中Si-MoS_(2)总是作为电子供体,将电子转移到气体分子;Si改性MoS_(2)对g3气体分解组分具有选择吸附性,为检测CF_(4)、COF_(2)气体的MoS_(2)高性能气敏传感器的研制提供了理论上的基础;研究结果在减少温室气体的排放、提高GIS(Gas Insulated Switchgear)的运行稳定性等方面同样具有重要意义.展开更多
A series of tungsten promoted alumina supported nickel catalysts has been prepared for the carbon dioxide reforming of methane to synthesis gas. The catalysts have been characterized by means of XRD, TEM, and Laser R...A series of tungsten promoted alumina supported nickel catalysts has been prepared for the carbon dioxide reforming of methane to synthesis gas. The catalysts have been characterized by means of XRD, TEM, and Laser Raman spectroscopy. It is shown that the addition of tungsten to the nickel catalyst can stabilize the catalyst and increase the resistance to carbon deposition. Adding a suitable amount of tungsten can also increase the catalyst activity to be close to that of supported noble metal catalysts. The carburisation of the tungsten modified nickel catalyst decreases the catalyst activity at lower reaction temperatures(<1123K), but has no effect on the catalyst performance at higher reaction temperatures. The alumina supported nickel catalyst modified by 0.67%(mass fraction) WO_3 has the equivalent equilibrium constant of the dry reforming reaction to that of alumina supported 5%(mass fraction) Ru at 873 K, and also has a lower activation energy for dry reforming than the latter.展开更多
Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the s...Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the surface acid-base properties of catalysts by introduction of alkali metal （Na, K） oxides inhibits the carbonization and as a result, improves the operational stability of these catalysts. An effect of promotion of nickel-alumina based composite doped by lanthanum oxide is found. This effect, caused by an additional route for the CO2 activation on Ni-La2O3/Al2O3/cordierite catalyst, is displayed in increase of methane conversion under conditions of an oxidant excess.展开更多
文摘MoS_(2)/CuS composite catalysts were successfully synthesized using a one-step hydrothermal method with sodium molybdate dihydrate,thiourea,oxalic acid,and copper nitrate trihydrate as raw materials.The hydrogen pro-duction performance of MoS_(2)/CuS prepared with different molar ratios of Mo to Cu precursors(n_(Mo)∶n_(Cu))as cathodic catalysts was investigated in the two-chamber microbial electrolytic cell(MEC).X-ray diffraction(XRD),X-ray pho-toelectron spectroscopy(XPS),scanning electron microscopy(SEM),transmission electron microscope(TEM),linear scanning voltammetry(LSV),electrochemical impedance analysis(EIS),and cyclic voltammetry(CV)were used to characterize the synthesized catalysts for testing and analyzing the hydrogen-producing performance.The results showed that the hydrogen evolution performance of MoS_(2)/CuS-20%(nMo∶nCu=5∶1)was better than that of platinum(Pt)mesh,and the hydrogen production rate of MoS_(2)/CuS-20%as a cathode in MEC was(0.2031±0.0237)m^(3)_(H_(2))·m^(-3)·d^(-1) for 72 h at an applied voltage of 0.8 V,which was slightly higher than that of Pt mesh of(0.1886±0.0134)m^(3)_(H_(2))·m^(-3)·d^(-1).The addition of a certain amount of CuS not only regulates the electron transfer ability of MoS_(2) but also increases the density of active sites.
基金supported by the National Natural Science Foundation of China(22178258,21975181)。
文摘The MoS_(2)-based materials are a vital class of heterogeneous catalysts for the hydrodeoxygenation of lignin and its model compounds to produce value-added chemicals especially because of their unique selectivity to aromatics.The rational design of MoS_(2)-based catalyst greatly depends on the comprehensive understanding of its structure-activity relationship.However,an intensive summary and critical analysis are still scarce to date.In this review,we attempt to provide an in-depth understanding of the interplay of structure,catalysis,and stability of MoS_(2)-based catalysts for lignin hydrodeoxygenation.The recognition of intrinsic active sites on MoS_(2) structure was firstly discussed,followed by the illustration of MoS_(2)-catalyzed hydrodeoxygenation structural models.Afterward,based on the studies on the MoS_(2)-catalyzed lignin model compounds hydrodeoxygenation,the current active site modification strategies including structural modification of monometallic MoS_(2) catalysts and collaborative modification were summarized and emphatically discussed,which aims to elucidate the structure-activity relationship at the atomic-level.The deactivation mechanism and stabilization strategies were also illustrated to provide instructive suggestion for the rational design of efficient and stable MoS_(2)-based catalysts.Finally,the real lignin depolymerization over MoS_(2)-based catalysts was summarized to point out the advantages and difficulties.This review attempts to highlight the remaining challenges and provide some perspectives for the future development of MoS_(2)-based catalysts for lignin hydrodeoxygenation.
文摘g3(green gas for gird)环保气体(C_(4)F_(7)N/CO_(2)混合)作为SF_(6)最具潜力的新型环保绝缘替代气体,近几年来受到了广泛关注.通过分析g3气体绝缘组合开关设备中的分解组分来检测局部放电、过热等缺陷故障,对于电力设备运行状态的评估和诊断具有重要作用.本文提出利用Si原子掺杂改性来提高MoS_(2)的气敏和吸附性能,并基于密度泛函理论(DFT)的计算方法,通过吸附能、电荷转移、态密度和局部态密度等参数指标,探究了本征MoS_(2)、Si改性MoS_(2)(Si-MoS_(2))对g3气体典型分解组分—COF_(2)、CF_(4)、CF_(3)CN的吸附气敏机理.分析表明Si原子在MoS_(2)表面具有稳定的掺杂结构,相比本征MoS_(2),Si原子改性之后的MoS_(2)的导电性得到了有效增强;Si-MoS_(2)对COF_(2)、CF_(4)气体表现出强化学吸附作用,对CF_(3)CN为弱物理吸附,吸附强度CF_(4)>COF_(2)>CF_(3)CN,且在吸附过程中Si-MoS_(2)总是作为电子供体,将电子转移到气体分子;Si改性MoS_(2)对g3气体分解组分具有选择吸附性,为检测CF_(4)、COF_(2)气体的MoS_(2)高性能气敏传感器的研制提供了理论上的基础;研究结果在减少温室气体的排放、提高GIS(Gas Insulated Switchgear)的运行稳定性等方面同样具有重要意义.
基金Supported by the National Natural Science Foundation of China
文摘A series of tungsten promoted alumina supported nickel catalysts has been prepared for the carbon dioxide reforming of methane to synthesis gas. The catalysts have been characterized by means of XRD, TEM, and Laser Raman spectroscopy. It is shown that the addition of tungsten to the nickel catalyst can stabilize the catalyst and increase the resistance to carbon deposition. Adding a suitable amount of tungsten can also increase the catalyst activity to be close to that of supported noble metal catalysts. The carburisation of the tungsten modified nickel catalyst decreases the catalyst activity at lower reaction temperatures(<1123K), but has no effect on the catalyst performance at higher reaction temperatures. The alumina supported nickel catalyst modified by 0.67%(mass fraction) WO_3 has the equivalent equilibrium constant of the dry reforming reaction to that of alumina supported 5%(mass fraction) Ru at 873 K, and also has a lower activation energy for dry reforming than the latter.
文摘Nickel-alumina catalysts supported on cordierite monoliths of honeycomb structure surpass essentially the conventional granulated ones with respect to the output in carbon dioxide reforming of methane. Adjusting the surface acid-base properties of catalysts by introduction of alkali metal （Na, K） oxides inhibits the carbonization and as a result, improves the operational stability of these catalysts. An effect of promotion of nickel-alumina based composite doped by lanthanum oxide is found. This effect, caused by an additional route for the CO2 activation on Ni-La2O3/Al2O3/cordierite catalyst, is displayed in increase of methane conversion under conditions of an oxidant excess.
