Preparation of Modified UiO-66 Catalyst and Its Catalytic Performance for NH_(3)-SCR Denitration

Zirconium-based metal-organic framework UiO-66 was successfully prepared by solvothermal method,and UiO-66 was modified by adding regulators such as formic acid,acetic acid,and hydrochloric acid.The NH_(3)-SCR reactivity of the samples was evaluated by the denitration activity evaluation system,and the UiO-66 and the regulator-modified UiO-66 were characterized by XRD,SEM,BET,FTIR,TG,NH_(3)-TPD,etc.,the effects of regulator types on the structure and properties of UiO-66 were investigated.The experimental results show that,after adding the modifier,the morphology of UiO-66 changes from irregular quadrilateral with serious agglomeration to particles with regular crystal shape and good dispersibility,and the crystal morphology of the catalyst is improved.In addition,after adding the modifier,UiO-66 has a larger specific surface area and stronger surface acidity,which optimizes the catalytic performance of UiO-66.The catalytic performance test results of NH_(3)-SCR show that the low-temperature activity of UiO-66 is poor,and it only shows a certain catalytic activity at higher temperatures.The catalytic activity of UiO-66 was significantly improved after adding the regulator.Among them,the UiO-66-HCl modified with hydrochloric acid had the best catalytic activity,and the denitration rate reached 70%when the denitration temperature was 380℃.

Accelerating the Screening of Modified MA_(2)Z_(4) Catalysts for Hydrogen Evolution Reaction by Deep Learning-Based Local Geometric Analysis

Machine learning(ML)integrated with density functional theory(DFT)calculations have recently been used to accelerate the design and discovery of single-atom catalysts(SACs)by establishing deep structure–activity relationships.The traditional ML models are always difficult to identify the structural differences among the single-atom systems with different modification methods,leading to the limitation of the potential application range.Aiming to the structural properties of several typical two-dimensional MA_(2)Z_(4)-based single-atom systems(bare MA_(2)Z_(4) and metal single-atom doped/supported MA_(2)Z_(4)),an improved crystal graph convolutional neural network(CGCNN)classification model was employed,instead of the traditional machine learning regression model,to address the challenge of incompatibility in the studied systems.The CGCNN model was optimized using crystal graph representation in which the geometric configuration was divided into active layer,surface layer,and bulk layer(ASB-GCNN).Through ML and DFT calculations,five potential single-atom hydrogen evolution reaction(HER)catalysts were screened from chemical space of 600 MA_(2)Z_(4)-based materials,especially V_(1)/HfSn_(2)N_(4)(S)with high stability and activity(Δ_(GH*)is 0.06 eV).Further projected density of states(pDOS)analysis in combination with the wave function analysis of the SAC-H bond revealed that the SAC-dz^(2)orbital coincided with the H-s orbital around the energy level of−2.50 eV,and orbital analysis confirmed the formation ofσbonds.This study provides an efficient multistep screening design framework of metal single-atom catalyst for HER systems with similar two-dimensional supports but different geometric configurations.

Effect of Ni loadings on the activity and coke formation of MgO-modified Ni/Al_2O_3 nanocatalyst in dry reforming of methane

MgO-modified Ni/Al2O3 catalysts with different Ni loadings were prepared and employed in dry reforming of methane （DRM）. The effect of Ni loadings on the activity and coke formation of Ni/MgO-A1203 catalysts were investigated. The synthesized catalysts were characterized by XRD, N2 adsorption-desorption, SEM, TPO and TPR techniques. The obtained results showed that increasing nickel loading decreased the BET surface area and increased the catalytic activity and amount of deposited carbon. In addition, the effect of gas hourly space velocity （GHSV） and feed ratio were studied.

Effects of sol-gel method and lanthanum addition on catalytic performances of nickel-based catalysts for methane reforming with carbon dioxide

The nickel-based catalysts were prepared by the sol-gel method and used for the CH4 reforming with CO2. The effects of the sol-gel method on the specific surface area, catalytic activity, desorption, and reduction performances of catalysts were investigated with BET, TPR, and TPD. Compared with the catalyst prepared by the impregnation method, the results indicated that the catalysts prepared by the sol-gel method had larger specific surface area, showing higher catalytic activities and exhibiting perfect desorption and reduction performances. In addition, the modification effects of adding La were studied, and it was found that the 0.75NLBT catalyst constituted of 5wt.%Ni-0.75wt.%La was optimal.

Pt-Ru Catalysts Prepared by a Modified Polyol Process for Direct Methanol Fuel Cells

Supported PtRu/C catalysts used in direct methanol fuel cells (DMFCs) were prepared by a new modified polyol method. Transmission electron microscopy (TEM), X-ray diffraction (XRD) and cyclic voltammograms (CVs) were carried out to characterize the morphology, composition and the electrochemical properties of the PtRu/C catalyst. The results revealed that the PtRu nanoparticles with small average particle size (≈2.5 nm), and highly dispersed on the carbon support. The PtRu/C catalyst exhibited high catalytic activity and anti poisoned performance than that of the JM PtRu/C. It is imply that the modified polyol method is efficient for PtRu/C catalyst preparation.

Methane Decomposition into Carbon Fibers over Coprecipitated Nickel-Based Catalysts

Decomposition of methane in the presence of coprecipitated nickel-basedcatalysts to produce carbon fibers was investigated. The reaction was studied in the temperaturerange of 773 K to 1073 K. At 1023 K, the catalytic activities of three catalysts kept high at theinitial period and then decreased with the reaction time. The lifetimes of Ni-Cu-Al and Ni-La-Alcatalysts are longer than that of Ni-Al catalyst. With three catalysts, the yield of carbon fiberswas very low at 773 K. The yield of carbon fibers for Ni-La-Al catalyst was more than those forNi-Al and Ni-Cu-Al catalysts. For Ni-La-Al catalyst, the elevation of temperature from 873 K up to1073 K led gradually to an increase in the yield of carbon fibers. XRD studies on the Ni-La-Alcatalyst indicate that La_2NiO_4 was formed. The formation of La_2NiO_4 is responsible for theincrease in the catalytic lifetime and the yield of carbon fibers synthesized on Ni-La-Al at773-1073 K. Carbon fibers synthesized on Ni-Al catalyst are thin, long carbon nanotubes. There arebamboo-shaped carbon fibers synthesized on Ni-Cu-Al catalyst. Carbon fibers synthesized on Ni-La-Alcatalyst have large hollow core, thin wall and good graphitization.

Study on Deactivation and Regeneration of Modified Red Mud Catalyst Used in Biodiesel Production

Deactivation of solid catalyst often occurs in biodiesel production. In this work, deactivated modified red mud catalysts used in biodiesel production were regenerated with hexane and calcination treatments. The deactivated and regenerated catalysts were characterized using XRD, FTIR, SEM, TG, N2 adsorption, measured for their basic strength, and tested in the transesterification of canola oil. The results revealed that the main cause of the catalyst deactivation is due to obstruction of the active sites by contaminants. The regeneration by washing with hexane followed by calcination can effectively improve the properties of the deactivated catalyst and increase its catalytic activity.

Glow Discharge Plasma-Assisted Preparation of Nickel-Based Catalyst for Carbon Dioxide Reforming of Methane

A plasma-assisted method was employed to prepare Ni/γ-All2O3 catalyst for carbon dioxide reforming of methane reaction. The novel catalyst possessed higher activity and better coke-suppression performance than those of the conventional calcination catalyst. To achieve the same CH4 conversion, the conventional catalyst needed higher reaction temperature, about 50 ℃ higher than that of the N2 plasma-treated catalyst. After the evaluation test, the deactivation rate of the novel catalyst was 1.7%, compared with 15.2% for the conventional catalyst. Different from the characterization results of the calcined catalyst, a smaller average pore diameter and a higher specific surface area were obtained for the plasma-treated catalyst. The variations of the reduction peak temperatures and areas indicated that the catalyst reducibility was promoted by plasma assistance. The dispersion of nickel was also remarkably improved, which was helpful for controlling the ensemble size of metal atoms on the catalyst surface. The modification effect of plasma- assisted preparation on the surface property of alumina supported catalyst was speculated to account for the concentration increase of absorbed CO2. An enhancement of CO2 adsorption was propitious to the inhibition of carbon formation. The coke amount deposited on plasma treated catalyst was much smaller than that on the conventional catalyst.

Synthesis and Characterization of Poly（Lactide）s Using Novel Solid Cloisite Modified Tin Catalyst

A novel cloisite modified solid catalyst was prepared in a single step from commercially available starting materials for the first time. The ring opening polymerization of L-lactide and D-lactide using this cloisite modified solid catalyst resulted in homopolymers of 75,000 and PDI = 1.6 and the maximum molecular weight （Mw） i.e. 180,000 with PDI = 1.9 were obtained. The catalytic activity ofcloisite modified solid catalyst was compared with the conventional stannous octoate catalyst and found superior to stannous octoate in all respect such as conversion, molecular weight and molecular weight distribution etc.. Moreover, the maximum molecular weight i.e. 180,000 was obtained at 220 ℃, whereas, transesterification reaction predominate in presence of stannous octoate The linear structure was confirmed by quantitative ^13C NMR Spectroscopy. Blend films were obtained by casting mixed solutions of poly （D-lactide） and poly （L-lactide） at various compositions, and stereocomplex was formed at 50/50 composition with molecular weight of 75,000.

Direct decomposition of nitric oxide in low temperature over iron-based perovskite-type catalyst modified by Ru

Iron-based perovskite-type compounds modified by Ru were prepared through sol-gel process to study its catalytic activity of NOx direct decomposition at low temperature and evaluate the conversion of NO under the experimental conditions. The catalytic activity of La 0.9Ce 0.1Fe 0.8-nCo 0.2RunO3 （n=0.01,0.03,0.05,0.07,0.09）series for the NO, NO-CO two components, CO-HC-NO three components were also analyzed. The catalytic investigation evidenced that the presence of Ru is necessary for making highly activity in decomposition of nitric oxide even at low temperature（400 ℃）and La 0.9Ce 0.9Fe 0.75Co 0.2Ru 0.05O3 （n=0.05） has better activity in all the samples, the conversion of it is 58.5%. With the reducing gas（CO,C3H6）added into the gas, the catalyst displayed very high activity in decomposition of NO and the conversion of it is 80% and 92.5% separately.

IR AND EPR STUDIES OF THE NUCLEAR ALKYLATION OF TOLUENE AND ETHYLENE ON THE MODIFIED Mg—AND P—ZSM—5 CATALYST

The surface intermediate (C_2H_5^+ and CH_3C_6H_5^+) and the reactive pathway of nuclear alkylation of toluene with ethylene to para—ethyl toluene over Mg salt and phosphorus acid modified ZSM—5 zeolites have been studied by 1R and EPR methods.

THE DIFFUSION OF m-XYLENE ON MODIFIED ZnZSM-5 AROMATIZATION CATALYST BEFORE AND AFTER COKING

The effect of coking amount for diffusion rate of m—xylene in a pore of the modified ZnZSM—5 aromatization catalyst has been studied.

EFFECT OF Ni CRYSTAL SIZE DISTRIBUTION ON THE ANTICOKING BEHAVIOR OF La-MODIFIED Ni/α-Al_2O_3 CATALYSTS

The crystal size distribution（CSD）was determined with small angle X-ray scattering technique.Theanticoking property of Ni-catalysts was investigated with the steam reforming of n-heptane in a TG-monitoredflow reactor.The results of this study show that the rate of coking on the supported Ni-catalysts depends main-ly on the percentage content of the large size fraction（25-70nm）of Ni-crystallites,and that the dispersion ofNi-crystallites and the anticoking property of the Ni/α-Al2O3 catalysts were promoted obviously by theLa2O3-modification method.The variation of the Ni-CSD and the anticoking property of the catalysts were fur-ther tested through different periods of hydrothermal treatment.It is found that the content of the largeNi-crystal size fraction and the coking rate pass correspondingly through a maximum.

Complete Oxidation of Methane over Palladium Supported on Alumina Modified with Calcium,Lanthanum,and Cerium Ions

The activity and thermal stability of Pd/Al2O3 and Pd/（Al2O3＋MOx） （M=Ca, La, Ce） palladium catalysts in the reaction of complete oxidation of methane are presented in this study. The catalyst supports were prepared by sol-gel method and they were dried either conventionally or with supercritical carbon dioxide. Then they were impregnated with palladium nitrate solution. The catalysts with unmodified alumina had a high surface area. The activity and thermal stability of the aluminasupported catalyst was also very high. The introduction of calcium, lanthanum, or cerium oxide into alumina support caused a decrease of the surface area in the way dependent on the support precursor drying method. These modifiers decreased the activity of palladium catalysts, and they required higher temperatures for the complete oxidation of methane than unmodified Pd/Al2O3. The improvement of the palladium activity by lanthanum and cerium support modifier was observed only at low temperatures of the reaction.

Phthalocyanine-derived catalysts decorated by metallic nanoclusters for enhanced CO_(2)electroreduction

Electrochemical CO_(2)reduction(CO_(2)RR)over molecular catalysts is a paramount approach for CO_(2)conversion to CO.Herein,we report a novel phthalocyanine-derived catalyst synthesized by a two-step method with a much improved electroconductivity.Furthermore,the catalyst contains both Ni-N4sites and highly dispersed metallic Ni nanoclusters,leading to an increased CO_(2)RR currents by two folds.Isotope labelling study and in situ spectroscopic analysis demonstrate that the existence of metallic Ni nanoclusters is the key factor for the activity enhancement and can shift the CO_(2)RR mechanism from being electron transfer(ET)-limited(forming*COO^(-))to concerted proton-electron transfer(CPET)-limited(forming CO).

MODIFICATION OF PALLADIUM METALLIC CATALYST WITH POLYMER-ANCHORED THIOETHER LIGANDS

A well-dispersed metallic palladium catalyst modified by polymer-anchored thioether ligands was used for the hydrogenation of cyclopentadiene to cyclopentene with high activity and selectivity in ambient condition. The evidences to show the modification of catalytic properties by polymer anchored ligands were given.

Phosphorous-Modified Carbon Nanotube-Supported Pt Nanoparticles for Propane Dehydrogenation Reaction

The sintering of Pt nanoparticles is one of the main reasons for catalyst deactivation during the high-temperature propane dehydrogenation(PDH) reaction. Promoters and supports have been introduced to prolong the catalyst life.However, it is still necessary to develop novel catalysts with robust stability. Herein, the phosphorus-modified carbon nanotube-supported Pt nanoparticles were employed for the PDH process. Phosphorus modification improves the Pt dispersion, effectively promoting the activity of Pt/P-CNTs. Additionally, the phosphorus-modified CNTs can interact strongly with Pt nanoparticles by improving the electron transfer or hybridization, stabilizing Pt nanoparticles from agglomeration, and significantly enhancing the catalyst stability.

In-situ Formation of SiC Whiskers by Ni-catalyzed Silicon-modified Pitch and Its Mechanism

The pitch was dried and modified with 1 mass%nickel nitrate and 10 mass% Si powder successively,then carbonized in Ar atmosphere at 900,1 000,1 100,1 200,1 300,and 1 400 ℃,respectively. Effects of carbonization temperature on phase composition and microstructure of Ni-catalyzed silicon modified pitch were studied by XRD,FESEM and EDS,and the growth mechanism of Si C whiskers was discussed as well. The results show that Si C whiskers form in the carbonized products of modified pitch processed in Ar atmosphere at 1 000,1 100,1 200,1 300,or 1 400 ℃; its length is about1- 6 μm; its growth mode is apical growth,and its growth mechanism accords with V- L- S mechanism.

Modification of Ni/SiO_2 Catalysts by Means of a Novel Plasma Technology

Atmospheric high frequency cold plasma jet was applied to modify Ni/SiO2 catalysts. The catalysts prepared by two different methods with plasma jet were compared with conventional catalysts. BET, XRD, H2-TPD and high-resolution transmission electron microscopy （HRTEM） were used to characterize these catalysts. The results showed that the catalyst prepared with plasma jet had higher nickel dispersion, larger specific surface area and smaller nickel particle size, about 5 nanometres. Detailed analyses revealed that improved structure and characteristic of the plasma catalyst were benefited from the large amount of hydrogen atoms in the plasma jet, by which the catalyst reduction can be easily achieved in shorter period of time at lower temperature, thus avoiding sintering and conglomeration of the active particles and the support. The activity of catalysts was investigated in the methane reforming with CO2. It is shown that the conversions of CH4 and CO2, the yields of H2 and CO were all significantly increased for the plasma catalysts.

Lowest Temperature Miniature Fuel Cell with Modified PS PEM Membrane and Fueled with Nitrogen, Sulfur and Oxygen Containing Fuels

Polymer exchange membrane fuel cells （PEMFC） are objects of the current engineering technology and these are versatile generators for electrical energy. There are various kinds from them, but all of them are going on work at highest temperature. There isn＇t a PEMFC which can run at room temperature, like 20 ℃. In this study there is a aim for constructing such one for alternative fuels utilisation. PS and many electroconducting polymer formulations were proved by different researchers for PEM benefications, but here PS was synthesized without containing metalic contaminants and after converted to the PEM membrane.