Combining gas exchange and chlorophyll a fluorescence measurements to analyze the photosynthetic activity of drip-irrigated cotton under different soil water deficits

Gas exchange and chlorophyll a fluorescence were measured to study the effects of soil water deficit （75, 60 and 45% of field capacity, FC） on the photosynthetic activity of drip-irrigated cotton under field conditions. At light intensities above 1 200 IJmol m-2 s-1, leaf net photosynthetic rate （mn） at 60 and 45% FC was 0.75 and 0.45 times respectively than that of 75% FC. The chlorophyll content, leaf water potential and yield decreased as soil water deficit decreased. Fiber length was significantly lower at 45% FC than at 75% FC. The actual quantum yield of the photosystem II （PSII） primary photo- chemistry and the photochemical quenching were significantly greater at 60% FC than at 75% FC. The electron transport rate and non-photochemical quenching at 45% FC were 0.91 and 1.29 times than those at 75% FC, respectively. The amplitudes of the K- and L-bands were higher at 45% FC than at 60% FC. As soil water content decreased, active PSII reaction centers per chlorophyll decreased, functional PSII antenna size increased, and energetic connectivity between PSII units decreased. Electron flow from plastoquinol to the PSI end electron acceptors was significantly lower at 45% FC than at 75% FC. Similar to the effect on leaf Po, water deficit reduced the performance index （PIABs, tot） in the dark-adapted state. These results suggest that （i） the effect of mild water deficit on photosystem activity was mainly related to processes between plastoquinol and the PSI end electron acceptors, （ii） PSI end electron acceptors were only affected at moderate water deficit, and （iii） PIABs. tota can reliably indicate the effect of water deficit on the energy supply for cotton metabolism.

NUMERICAL SIMULATION OF THE TEMPERATURE FIELD IN A SOLDER BALL UNDER PULSED LASER AND ITS EFFECT ON THE VIBRATION OF THE SOLDER

The research presented here is focused on the vibration condition of a small volume solder solder ball,which is placed on the surface of a soldering pad and is exerted a pulse modulated continuous wave laser heat source. Finite element method is applied to analyzed the temperature field in the solder ball, and experi- ment is conducted to test the vibration. the results show that,that, the temperature field flucturates with the same frequency as that of the laser pulse, which in turn causes a forced vibration of the same frequency in the liquid solder ball.

Chirped optical solitons and stability analysis of the nonlinear Schrödinger equation with nonlinear chromatic dispersion

The present paper aims to investigate the chirped optical soliton solutions of the nonlinear Schrödinger equation with nonlinear chromatic dispersion and quadratic-cubic law of refractive index.The exquisite balance between the chromatic dispersion and the nonlinearity associated with the refractive index of a fiber gives rise to optical solitons,which can travel down the fiber for intercontinental distances.The effective technique,namely,the new extended auxiliary equation method is implemented as a solution method.Different types of chirped soliton solutions including dark,bright,singular and periodic soliton solutions are extracted from the Jacobi elliptic function solutions when the modulus of the Jacobi elliptic function approaches to one or zero.These obtained chirped optical soliton solutions might play an important role in optical communication links and optical signal processing systems.The stability of the system is examined in the framework of modulational instability analysis.

Power distribution analysis for multiple modulation formats in an all-optical sampling wavelength division multiplexing system

An optimal power distribution analysis for an all-optical sampling orthagonal frequency division multiplexing(OFDM) scheme with multiple modulation formats including diferential phase shift keyed(DPSK), diferential quadrature phase shift keyed(DQPSK), and non-return-to-zero(NRZ) is proposed. The noise tolerances of different modulation formats are analyzed, and the optimal input power ratio between phase and intensity modulation formats for the best overall receiving performance is investigated under unchanged total input power. Moreover, this scheme can seamlessly coexist with the traditional WDM channel.

Theoretical analysis and experimental research on non-cavitation noise modulation mechanism of underwater counter-rotation propeller

The underwater counter-rotation propeller non-cavitation noise has an obvious mod- ulation characteristic which is due to the interaction of flow and blade. A modulation mecha- nism is presented in this paper. A sound pressure spectrum model is presented to describe its non-cavitation noise with application of generalized acoustic analogy method, the modulation mechanism is expressed with the improvement of sound pressure model. The power spectrum and modulation spectrum are presented by numerical simulation. Theoretical analysis and nu- merical simulation results are verified by the cavitation tunnel experiment. The modulation model of counter-rotation propeller is beneficial to the prediction modulation characteristics and identification of underwater high-speed vehicles.

FDTD Method in the Analysis of Lithium Niobate Modulator

The Mach-Zehnder traveling-wave lithium niobate modulator is simulated by time domain finite difference (FDTD) method for different device geometry. The result is comparable to the reported value by finite element method.

Analysis of VCSEL Array Module Using a Simple Microlens Array

A simple microlens array is designed between VCSEL array and fiber array for integration of array module. We increase the optical coupling efficiency from -32.057 dBm to -0.9054 dBm by using our designed microlens array.

Numerical Analysis of Electrically Tunable Delay-Line with an SSB Modulator

By using an optical system simulator, we investigated the tunable delay-line with an optical SSB modulator and an optical fiber loop, where the delay can be controlled by the electric signal fed to the modulator.

Bioinformatic identification of key genes and pathways that may be involved in the pathogenesis of HBV-associated acute liver failure

In order to explore the molecular mechanisms behind the pathogenesis of acute liver failure(ALF)associated with hepatitis B virus(HBV)infection,the present study aimed to identify potential key genes and pathways involved using samples from patients with HBV-associated ALF.The GSE38941 array dataset was downloaded from the Gene Expression Omnibus database,and differentially expressed genes(DEGs)between 10 liver samples from 10 healthy donors and 17 liver specimens from 4 patients with HBV-associated ALF were analyzed using the Linear Models for Microarray Data package.Gene Ontology and KEGG pathway enrichment analyses of the DEGs were performed,followed by functional annotation of the genes and construction of a proteineprotein interaction(PPI)network.Subnetwork modules were subsequently identified and analyzed.In total,3142 DEGs were identified,of which 1755 were upregulated and 1387 were downregulated.The extracellular exosome,immune response,and inflammatory response pathways may potentially be used as biomarkers of ALF pathogenesis.In total,17 genes(including CCR5,CXCR4,ALB,C3,VGEFA,and IGF1)were identified as hub genes in the PPI network and may therefore be potential marker genes for HBV-associated ALF.