Electromagnetic Compatibility Design for Powertrain Control Module

In order to improve the electromagnetic compatibility of powertrain control module （PCM）, a system procedure of vehicular PCM electromagnetic alteration is presented in this paper. First of all, the box of the PCM is divided into different cabins to eliminate interferences between power supply circuit, analog circuit and digital circuit. Secondly, the working principle and electromagnetic （EM） characters of all the signals adopted by a typical PCM are analyzed. Then according to specific electromagnetic characters, different measures are adopted in corresponding signal process circuits or signal transfer cables, such as ground layout designing, power supply protecting, signal shielding and drive cable interference suppressing. Finally, further improvement may also needed regarding to practical electromagnetic compatibility test effects. The final test shows that, with all the measures mentioned above, the conducted emission of a PCM can be reduced by 20 dB; meanwhile, the radiated emission can be reduced by 30 dB comparing to the original system.

Realization of embedded control module for micro assembly line

A modularized, network, reconfigurable architecture and design method of embedded control module is proposed. This control module uses a TMS320F2812 chip as the core, and intro- duces modularization, network, reconfigurable theory to the design of control module to better meet the flexible and reconfigurable control need of assembly line. The design method of the control module is verified by constructing a control experiment based on controlling of precision x - y displace- ment platform through a CAN bus. Experimental results show that the controlling repeat position accuracy of precision x - y platform by control module is 0. 5 μm and the position error is less than 1μm which meet the needs of micro-adjustment pose of assembly line.

Photo-Doped Active Electrically Controlled Terahertz Modulator

We demonstrate an electric-controlled terahertz（THz） modulator which can be used to realize amplitude modulation of terahertz waves with slight photo-doping. The THz pulse transmission was efficiently modulated by electrically controlling the monolayer silicon-based device. The modulation depth reached 100% almost when the applied voltage was 7V at an external laser intensity of 0.6W/cm2. The saturation voltage reduced with the increase of the photo-excited intensity. In a THz continuous wave（CW）system, a significant fall in both THz transmission and reflection was also observed with the increase of applied voltage. This reduction in the THz transmission and reflection was induced by the absorption for electron injection. The results show that a high-efficiency and high modulation depth broadband electric-controlled terahertz modulator in a pure Si structure has been realized.

水下控制模块测试系统的系统设计与实验研究

As a core part of subsea production systems,subsea control modules(SCMs)are costly,difficult,and expensive to install and inconvenient to use in underwater maintenance.Therefore,performance and function tests must be carried out before launching SCMs.This study developed a testing device and an SCM test by investigating SCMs and their underwater.The testing device includes four parts:a hydraulic station,an SCM test stand,a signal generating device,and an electronic test unit.First,the basic indices of the testing device were determined from the performance and working parameters of the SCM.Second,the design scheme of the testing device for the SCM was tentatively proposed,and each testing device was designed.Finally,a practical measurement of the SCM,in combination with the hydraulic station,SCM test stand,signal generator,electronic unit,and highpressure water tank,was carried out according to the test requirements.The measurement mainly involved equipment inspection before testing and an experimental test for the SCM.The validity and feasibility of the testing device and method were simultaneously verified through an association test.

Extended state observer-based pressure control for pneumatic actuator servo systems

A pneumatic actuator is a fast and economical tool that converts compressed air into mechanical motion.In this paper,an extended state observer(ESO)-based sliding mode controller(SMC)is developed to adjust the air pressure of the actua-tor for accurate position control,Specifically,an impedance control module is established to produce desired air pressure based on the relationship between forces and desired positions.Then,the ESO-based SMC is implemented to adjust the air pressure to the required level despite the presence of system uncertainties and disturbances.As a result,the position of the actuator is controlled to a setpoint through the regulation of pressure.The performance of ESO-based SMC is compared with that of a classic active disturbance rciection controller(ADRC)and a SMC.Simulation results demonstrate that the:ESO-based SMC shows comparable performance to ADRC in terms of precise pressure control.In addition,it requires the least control effort ncessary to excite valves among the three controllers.The stability of ESO based SMC is theoretically justifed through Lyapunov approach.