The accumulation of snow and ice on PV modules can have a detrimental impact on power generation,leading to reduced efficiency for prolonged periods.Thus,it becomes imperative to develop an intelligent system capable ...The accumulation of snow and ice on PV modules can have a detrimental impact on power generation,leading to reduced efficiency for prolonged periods.Thus,it becomes imperative to develop an intelligent system capable of accurately assessing the extent of snow and ice coverage on PV modules.To address this issue,the article proposes an innovative ice and snow recognition algorithm that effectively segments the ice and snow areas within the collected images.Furthermore,the algorithm incorporates an analysis of the morphological characteristics of ice and snow coverage on PV modules,allowing for the establishment of a residual ice and snow recognition process.This process utilizes both the external ellipse method and the pixel statistical method to refine the identification process.The effectiveness of the proposed algorithm is validated through extensive testing with isolated and continuous snow area pictures.The results demonstrate the algorithm’s accuracy and reliability in identifying and quantifying residual snow and ice on PV modules.In conclusion,this research presents a valuable method for accurately detecting and quantifying snow and ice coverage on PV modules.This breakthrough is of utmost significance for PV power plants,as it enables predictions of power generation efficiency and facilitates efficient PV maintenance during the challenging winter conditions characterized by snow and ice.By proactively managing snow and ice coverage,PV power plants can optimize energy production and minimize downtime,ensuring a sustainable and reliable renewable energy supply.展开更多
A wide range of methods for geological reservoir modeling has been offered from which a few can reproduce complex geological settings, especially different facies and fracture networks. Multi Point Statistic (MPS) alg...A wide range of methods for geological reservoir modeling has been offered from which a few can reproduce complex geological settings, especially different facies and fracture networks. Multi Point Statistic (MPS) algorithms by applying image processing techniques and Artificial Intelligence (AI) concepts proved successful to model high-order relations from a visually and statistically explicit model, a training image. In this approach, the patterns of the final image (geological model) are obtained from a training image that defines a conceptual geological scenario for the reservoir by depicting relevant geological patterns expected to be found in the subsurface. The aim is then to reproduce these training patterns within the final image. This work presents a multiple grid filter based MPS algorithm to facies and fracture network images reconstruction. Processor is trained by training images (TIs) which are representative of a spatial phenomenon (fracture network, facies...). Results shown in this paper give visual appealing results for the reconstruction of complex structures. Computationally, it is fast and parsimonious in memory needs.展开更多
In recent years, explosively increasing data traffic has been boosting the con?tinuous demand of high speed optical interconnection inside or among data centers, high performance computers and even consumer electronic...In recent years, explosively increasing data traffic has been boosting the con?tinuous demand of high speed optical interconnection inside or among data centers, high performance computers and even consumer electronics. To pursue the improved intercon?nection performance of capacity, energy efficiency and simplicity, effective approaches are demonstrated including particularly advanced digital signal processing (DSP) meth?ods. In this paper, we present a review about the enabling adaptive DSP methods for opti?cal interconnection applications, and a detailed summary of our recent and ongoing works in this field. In brief, our works focus on dealing with the specific issues for short-reach interconnection scenarios with adaptive operation, including signal-to-noise-ratio (SNR) limitation, level nonlinearity distortion, energy efficiency consideration and the de?cision precision.展开更多
This paper deals with the technology of using comb filters for FIR Decimation in Digital Signal Processing. The process of decreasing the sampling frequency of a sampled signal is called decimation. In the usage of de...This paper deals with the technology of using comb filters for FIR Decimation in Digital Signal Processing. The process of decreasing the sampling frequency of a sampled signal is called decimation. In the usage of decimating filters, only a portion of the out-of-pass band frequencies turns into the pass band, in systems wherein different parts operate at different sample rates. A filter design, tuned to the aliasing frequencies all of which can otherwise steal into the pass band, not only provides multiple stop bands but also exhibits computational efficiency and performance superiority over the single stop band design. These filters are referred to as multiband designs in the family of FIR filters. The other two special versions of FIR filter designs are Halfband and Comb filter designs, both of which are particularly useful for reducing the computational requirements in multirate designs. The proposed method of using Comb FIR decimation procedure is not only efficient but also opens up a new vista of simplicity and elegancy to compute Multiplications per Second (MPS) and Additions per Second (APS) for the desired filter over and above the half band designs.展开更多
依据星座图采用非参数贝叶斯方法对多元相移键控(MPSK)信号进行调制识别.将未知信噪比(SNR)水平的MPSK信号看成复平面内多个未知均值和方差的高斯分布依照一定的比例混合而成,利用非参数贝叶斯推断方法进行密度估计,实现对MPSK信号分类...依据星座图采用非参数贝叶斯方法对多元相移键控(MPSK)信号进行调制识别.将未知信噪比(SNR)水平的MPSK信号看成复平面内多个未知均值和方差的高斯分布依照一定的比例混合而成,利用非参数贝叶斯推断方法进行密度估计,实现对MPSK信号分类目的.推断过程中,引入Dirichlet过程作为混合比例因子的先验分布,结合正态逆Wishart(NIW)分布作为均值和方差的先验分布,根据接收信号,利用Gibbs采样的MCMC(Monte Carlo Markov chain)随机采样算法,不断调整混合比例因子、均值和方差.通过多次迭代,得到对调制信号的密度估计.仿真表明,在SNR>5dB,码元数目大于1600时,2/4/8PSK的识别率超过了95%.展开更多
基金supported by the Key Research and Development Projects in Shaanxi Province(Program No.2021GY-306)the Innovation Capability Support Program of Shaanxi(Program No.2022KJXX-41)the Key Scientific and Technological Projects of Xi’an(Program No.2022JH-RGZN-0005).
文摘The accumulation of snow and ice on PV modules can have a detrimental impact on power generation,leading to reduced efficiency for prolonged periods.Thus,it becomes imperative to develop an intelligent system capable of accurately assessing the extent of snow and ice coverage on PV modules.To address this issue,the article proposes an innovative ice and snow recognition algorithm that effectively segments the ice and snow areas within the collected images.Furthermore,the algorithm incorporates an analysis of the morphological characteristics of ice and snow coverage on PV modules,allowing for the establishment of a residual ice and snow recognition process.This process utilizes both the external ellipse method and the pixel statistical method to refine the identification process.The effectiveness of the proposed algorithm is validated through extensive testing with isolated and continuous snow area pictures.The results demonstrate the algorithm’s accuracy and reliability in identifying and quantifying residual snow and ice on PV modules.In conclusion,this research presents a valuable method for accurately detecting and quantifying snow and ice coverage on PV modules.This breakthrough is of utmost significance for PV power plants,as it enables predictions of power generation efficiency and facilitates efficient PV maintenance during the challenging winter conditions characterized by snow and ice.By proactively managing snow and ice coverage,PV power plants can optimize energy production and minimize downtime,ensuring a sustainable and reliable renewable energy supply.
文摘A wide range of methods for geological reservoir modeling has been offered from which a few can reproduce complex geological settings, especially different facies and fracture networks. Multi Point Statistic (MPS) algorithms by applying image processing techniques and Artificial Intelligence (AI) concepts proved successful to model high-order relations from a visually and statistically explicit model, a training image. In this approach, the patterns of the final image (geological model) are obtained from a training image that defines a conceptual geological scenario for the reservoir by depicting relevant geological patterns expected to be found in the subsurface. The aim is then to reproduce these training patterns within the final image. This work presents a multiple grid filter based MPS algorithm to facies and fracture network images reconstruction. Processor is trained by training images (TIs) which are representative of a spatial phenomenon (fracture network, facies...). Results shown in this paper give visual appealing results for the reconstruction of complex structures. Computationally, it is fast and parsimonious in memory needs.
基金This work was supported by National Natural Science Foundation of Chi⁃na(NSFC)under Grant Nos.61935011,61875124 and 61875049.
文摘In recent years, explosively increasing data traffic has been boosting the con?tinuous demand of high speed optical interconnection inside or among data centers, high performance computers and even consumer electronics. To pursue the improved intercon?nection performance of capacity, energy efficiency and simplicity, effective approaches are demonstrated including particularly advanced digital signal processing (DSP) meth?ods. In this paper, we present a review about the enabling adaptive DSP methods for opti?cal interconnection applications, and a detailed summary of our recent and ongoing works in this field. In brief, our works focus on dealing with the specific issues for short-reach interconnection scenarios with adaptive operation, including signal-to-noise-ratio (SNR) limitation, level nonlinearity distortion, energy efficiency consideration and the de?cision precision.
文摘This paper deals with the technology of using comb filters for FIR Decimation in Digital Signal Processing. The process of decreasing the sampling frequency of a sampled signal is called decimation. In the usage of decimating filters, only a portion of the out-of-pass band frequencies turns into the pass band, in systems wherein different parts operate at different sample rates. A filter design, tuned to the aliasing frequencies all of which can otherwise steal into the pass band, not only provides multiple stop bands but also exhibits computational efficiency and performance superiority over the single stop band design. These filters are referred to as multiband designs in the family of FIR filters. The other two special versions of FIR filter designs are Halfband and Comb filter designs, both of which are particularly useful for reducing the computational requirements in multirate designs. The proposed method of using Comb FIR decimation procedure is not only efficient but also opens up a new vista of simplicity and elegancy to compute Multiplications per Second (MPS) and Additions per Second (APS) for the desired filter over and above the half band designs.
基金Cultivation Fund of the Key Scientific and Technical Innovation Project of Ministry of Education of China(No.3104001014)
文摘依据星座图采用非参数贝叶斯方法对多元相移键控(MPSK)信号进行调制识别.将未知信噪比(SNR)水平的MPSK信号看成复平面内多个未知均值和方差的高斯分布依照一定的比例混合而成,利用非参数贝叶斯推断方法进行密度估计,实现对MPSK信号分类目的.推断过程中,引入Dirichlet过程作为混合比例因子的先验分布,结合正态逆Wishart(NIW)分布作为均值和方差的先验分布,根据接收信号,利用Gibbs采样的MCMC(Monte Carlo Markov chain)随机采样算法,不断调整混合比例因子、均值和方差.通过多次迭代,得到对调制信号的密度估计.仿真表明,在SNR>5dB,码元数目大于1600时,2/4/8PSK的识别率超过了95%.
