In the research,three kinds composite materials of biomimetic laminated boards made from cross-linking starch/maize stalk fiber-the single layer jute fiber reinforced maize stalk fiber boards,the dual layer jute fiber...In the research,three kinds composite materials of biomimetic laminated boards made from cross-linking starch/maize stalk fiber-the single layer jute fiber reinforced maize stalk fiber boards,the dual layer jute fiber reinforced maize stalk fiber boards,the jute fiber hybrid reinforced maize stalk fiber boards were obtained according to the formulation of cross-linking maize starch adhesive and the preparation process of composite materials.The hygroscopicity variation of the biomimetic laminated boards made from cross-linking starch/maize stalk fiber was investigated under different relative humidity conditions.The moisture absorption rate and the variation velocity were used as important evaluation indexes to evaluate the moisture absorption properties of the straw fiber composites.The mathematical models of the moisture absorption rate and the variation velocity were established.The hygroscopicity variation curves of three kinds of composite materials were measured under the five different relative humidity conditions.The results showed that the three kinds composites had low moisture absorption rate compared with other stalk fiber composites which were good at water resistance and the waterproof property of the three kinds stalk fibers were excellent under the experimental conditions.The research provides a useful reference to improve the water resistance of fiber composites and a new idea on the development and application of the biodegradable composites,especially the straw fiber reinforced composites.展开更多
Molasses was used as an alternative binder to the bentonite binder. The change in moisture absorption by pellets prepared with different iron ores and different molasses contents were investigated. Iron ore properties...Molasses was used as an alternative binder to the bentonite binder. The change in moisture absorption by pellets prepared with different iron ores and different molasses contents were investigated. Iron ore properties exerted the major effect on pellet behavior and final pellet quality. The absorbed moisture content of pellets prepared without binder, bentonite-added pellets, and molasses-added pellets were in the range of 7.72%–9.95%, 9.62%–10.84%, and 6.14%-6.69%, respectively. The wet pellet compressive strength of molasses-added pellets(43–230 N/pellet) was superior to that of bentonite-added pellets(9.47–11.92 N/pellet). The compressive strength of dried molasses-modified pellets increased to 222–394 N/pellet, which is currently the highest value achieved for dried pellets.展开更多
Composite materials have attracted increasing attention to replace traditional materials such as metals for aerospace and automotive components due to their excellent mechanical and lightweight properties.By reinforci...Composite materials have attracted increasing attention to replace traditional materials such as metals for aerospace and automotive components due to their excellent mechanical and lightweight properties.By reinforcing with fillers,the material properties can be tailored to suit the needs of certain requirements.Nanofillers graphene oxide(GO) and silica(SiO_2) are incorporated into carbon fibre/epoxy(CF/E)composites to enhance epoxy resin properties by impregnating into the weak area of resin and boosting the interaction forces between resin and filler interfaces.The mechanical,thermal,and morphological properties of GO and SiO_2 fillers in the CF/E were investigated.Movever,after the exposure to distilled water and salt water,effect of moisture absorption on flexural and impact properties were investigated and the CF/E composite with hybrid nanofillers exhibited strong resistance to degradation in flexural and impact properties.FESEM images of the fracture surfaces indicated that the good performance of CF/E composite with bi-hybrid nanofillers originated from the synergistic GO and SiO_2 nanofillers,which limit the motion of epoxy polymer molecular chain and give sufficient stress transfer ability to the composite system.The overall results showed that GO and SiO_2 fillers can significantly enhance the mechanical properties as well as resistance to moisture environment.展开更多
基金supported by National Science Fund for Distinguished Young Scho lars of China(Grant No.50025516)National Natural Science Foundation of China(Grant No.50675087,50673037,5030600131)+1 种基金"985 Project"of Jilin University,Natural Science Foundation of Henan Educational Committee(Grant No.2009B210006)Innovation Ability Foundation of Natural Science(Grant No.2013ZCX002)of Henan University of Science and Technology.
文摘In the research,three kinds composite materials of biomimetic laminated boards made from cross-linking starch/maize stalk fiber-the single layer jute fiber reinforced maize stalk fiber boards,the dual layer jute fiber reinforced maize stalk fiber boards,the jute fiber hybrid reinforced maize stalk fiber boards were obtained according to the formulation of cross-linking maize starch adhesive and the preparation process of composite materials.The hygroscopicity variation of the biomimetic laminated boards made from cross-linking starch/maize stalk fiber was investigated under different relative humidity conditions.The moisture absorption rate and the variation velocity were used as important evaluation indexes to evaluate the moisture absorption properties of the straw fiber composites.The mathematical models of the moisture absorption rate and the variation velocity were established.The hygroscopicity variation curves of three kinds of composite materials were measured under the five different relative humidity conditions.The results showed that the three kinds composites had low moisture absorption rate compared with other stalk fiber composites which were good at water resistance and the waterproof property of the three kinds stalk fibers were excellent under the experimental conditions.The research provides a useful reference to improve the water resistance of fiber composites and a new idea on the development and application of the biodegradable composites,especially the straw fiber reinforced composites.
文摘Molasses was used as an alternative binder to the bentonite binder. The change in moisture absorption by pellets prepared with different iron ores and different molasses contents were investigated. Iron ore properties exerted the major effect on pellet behavior and final pellet quality. The absorbed moisture content of pellets prepared without binder, bentonite-added pellets, and molasses-added pellets were in the range of 7.72%–9.95%, 9.62%–10.84%, and 6.14%-6.69%, respectively. The wet pellet compressive strength of molasses-added pellets(43–230 N/pellet) was superior to that of bentonite-added pellets(9.47–11.92 N/pellet). The compressive strength of dried molasses-modified pellets increased to 222–394 N/pellet, which is currently the highest value achieved for dried pellets.
基金Sponsored by the National Science Fund for Excellent Young Scholars(Grant No.51722509)the National Natural Science Foundation of China(Grant No.51575440)the Shaanxi Science and Technology Project(Grant No.2016GY-011)
文摘Composite materials have attracted increasing attention to replace traditional materials such as metals for aerospace and automotive components due to their excellent mechanical and lightweight properties.By reinforcing with fillers,the material properties can be tailored to suit the needs of certain requirements.Nanofillers graphene oxide(GO) and silica(SiO_2) are incorporated into carbon fibre/epoxy(CF/E)composites to enhance epoxy resin properties by impregnating into the weak area of resin and boosting the interaction forces between resin and filler interfaces.The mechanical,thermal,and morphological properties of GO and SiO_2 fillers in the CF/E were investigated.Movever,after the exposure to distilled water and salt water,effect of moisture absorption on flexural and impact properties were investigated and the CF/E composite with hybrid nanofillers exhibited strong resistance to degradation in flexural and impact properties.FESEM images of the fracture surfaces indicated that the good performance of CF/E composite with bi-hybrid nanofillers originated from the synergistic GO and SiO_2 nanofillers,which limit the motion of epoxy polymer molecular chain and give sufficient stress transfer ability to the composite system.The overall results showed that GO and SiO_2 fillers can significantly enhance the mechanical properties as well as resistance to moisture environment.
