Studies on Lattice Parameter,Molar Volume and Excess Molar Volume of Pb-based a-phase Solid Solution in Pb-Sn-Cd Ternary System

The lattice parameters a and the molar volumes Km of Pb-based a-phase solid solutions in the Pb-Sn-Cd ternary system were determined by means of X-ray diffraction. The lattice parameters a vary linearly with the molar fractions, the molar volumes show a positive deviation from the ideal solution behaviour, and the contribution of the solute Cd to the excess molar volumes V is much larger than that of the solute Sn. According to Vegard' s law orsub-regular solution model, the relationship between the experimental data of a or Vm andthe compositions of alloy is obtained by the mathematic regressive method, the prediction precisions of the both formulae are within the limits of experiment error.

Determination of Partial Molar Volumes of EPA and DHA Ethyl Esters in Supercritical Carbon Dioxide

The use of supercritical-fluid chromatography for determining partial molar volumes of ethyl esters of cis-5,8,11,14,17-eicosapentaenoic acid (EPA) and cis -4,7,10,13,16,19- docosa-hexaenoic acid (DHA) in supercritical carbon dioxide is presented and discussed. Partial molar volumes of EPA and DHA esters are obtained from the variation of the retention properties with the density of mobile phase at 313.15 K, 323.15 K, 333.15 K and in the pressure range from 9 MPa to 21 MPa.

Apparent Molar Volumes and Solvation Coefficients in Ternary-pseudo-binary Mixtures [(Styrene+Ethyl Acetate or Benzene)+(N-Methyl-2-pyrrolidone+Ethyl Acetate or Benzene)]

Over the full range of compositions, in the ternary-pseudo-binary mixtures of x[（1-y）C6H5CH=CH2＋ yCH3COOC2H5（or C6H6）]＋（1-x）[（1-y）NMP＋yCH3COOC2Hs（or C6H6）], the apparent molar volumes of each pseudo-pure component at different y values were calculated from the density data at 298.15 K and atmospheric pressure. The results show that the four parameters cubic polynomial can correlate the apparent molar volume with the molar fraction well over the full molar fraction range. The limiting partial molar volumes and the molar volumes of each pseudo-pure component were evaluated with different methods. Based on the limiting partial molar volume and molar volume at a certain y value, a new universal coefficient termed as solvation coefficient γ was defined to describe quantitatively the solvation degree of pseudo-pure solute and the interactions of solute-solvent molecules from the macroscopical thermodynamics viewpoint. The results demonstrate the solvation coefficients decrease with the amount of the third component increasing for each pseudo-pure solute, irrespective of the pseudo-pure solvent. Then the solvation degrees of each pseudo-pure component, the specific interactions between the solute molecule and the solvent one were discussed in terms of the solvation coefficient.

Excess Molar Volume of Binary Mixtures of Methylheptenone+Alkanols at 298.15 K

Excess molar volume(V E) data on binary liquid mixtures of methylheptenone (MHO) with methanol, ethanol, n-propanol or n-butanol have been determined from the density measurements at 298.15 K and atmospheric pressure. The values of V E in all the systems over the entire composition range are quantified by the Redlich-Kister equation. The effects of the chain length of alkanols on V E are discussed.

Densities and excess molar volumes of mixtures containing diesel,biodiesel and alkanols at temperatures from 288.15 to 313.15 K

The present work is focusing on the synthesization and physico-chemical properties of Jatropha curcas biodiesel with diesel and alcohols.The densities of binary diesel(2)+1-alkanols(C_(3) or C_(4))(3)and ternary Jatropha curcas biodiesel(1)+diesel(2)+1-alkanols(C_(3)or C_(4))(3)blends have been reported over full range of composition at temperatures within range 288.15 to 313.15 K.Also densities of Jatropha curcas biodiesel(1)+diesel or 1-alkanols(C_(3) or C_(4))(2)blends have been measured at 313.15 K.Excess molar volumes,V^E,V^E_(123)of binary and ternary blends were calculated from the measured data and the derived properties were correlated to composition using Redlich-Kister equation.A reasonable agreement was found between the measured and estimated values.Further,densities and excess molar volumes data were reasoned to discuss molecular interactions taking into consideration effect of composition and temperature.

Activity Trends in Desoxy Anthrapyrazoles: The Influence of Molar Volume, Polarizability and Lipophilicity of N₂C₅Side Chains on Their Anticancer Response

QSAR methodology was used to assess the effects of lipophilicity (logP), molar volume (MV) and polarizability (pl) of the side chains at N2 and C5 of 20 known desoxy anthrapyrazoles on their in vitro anticancer activity expressed as the negative logarithm of the inhibitory concentration of 50% of L1210 murine leukemia cell line (1/logIC50). The main data set shows poor correlations between biological response and the descriptors with exception of MV of the C5 side chain, where a moderate correlation was discerned ( =0.60, n = 18, two outliers). To extract more information regarding mechanism, the main data set was visually classified to three clusters depending on N2 side chain. Cluster 1 containing six 5-substituted 2-[(2-hydroxyethyl) amino] ethyl anthrapyrazoles;cluster 2 contains ten 5-subsitutes 2-(diethyl amino) ethyl anthrapyrazoles and cluster 3 contains four anthrapyrazoles with miscellaneous substituents at both N2 and C5. For cluster 1, MV and pl of C5 show high correlation with biological response (R2’s = 0.75 and 0.72 respectively) while logP gives a weak correlation (R2 = 0.44). For cluster 2, the correlations of logP and pl of C2side chain are higher (=0.66 and 0.62 respectively) compared with MV (=0.16). Cluster 3 shows very poor correlation with all descriptors (~0.3). This indicates mechanistic distinction between the three clusters. Derived descriptors which represent the difference between the descriptors of N2 and C5 side chains where used to explore the presence of interplay between these descriptors in affecting variability of the biological response.

Two-stage extraction by partial grinding of impacted mandibular third molar in close proximity to the inferior alveolar nerve

BACKGROUND Extraction of impacted third molars often leads to severe complications caused by damage to the inferior alveolar nerve(IAN).AIM To proposes a method for the partial grinding of an impacted mandibular third molar(IMM3)near the IAN to prevent IAN injury during IMM3 extraction.METHODS Between January 1996 and March 2022,25 patients with IMM3 roots near the IAN were enrolled.The first stage of the operation consisted of grinding a major part of the IMM3 crown with a high-speed turbine dental drill to achieve sufficient space between the mandibular second molar and IMM3.After 6 months,when the root tips were observed to be away from the IAN on X-ray examination,the remaining part of the IMM3 was completely removed.RESULTS All IMM3s were extracted easily without symptoms of IAN injury after extraction.CONCLUSION Partial IMM3 grinding may be a good alternative treatment option to avoid IAN injury in high-risk cases.

A Case Report of Kissing Molars Class II

Kissing molars (KMs) is a condition of occlusal molar surfaces in a single follicular space with roots extending in opposite directions. Here, we have reported a case of KMs in a 58-year-old woman. The patient complained of pain in the right mandibular molar region and was diagnosed with KMs consisting of the right mandibular second and third molars. Because of the patient’s pain having subsided at the time of the visit and her unwillingness to undergo tooth extraction, the patient was followed up. KMs is classified into three classes (I-III) and is either true-KMs or pseudo-KMs and presents with or without cystic variants of dental follicles. The presents as true-KMs class II without a cystic variant. With reference to the literature and based on our analysis, the mean age of patients affected by this specific case of KMs is 31.7 years and unilateral KMs is relatively more common (85.7%). Histopathological findings of dentigerous cysts are more often indicated (42.9%). The treatment policy for KMs should therefore be based on the classification of KMs. Importantly, the focus should be on preserving the first and second molars as much as possible. The treatment approach, such as the employment of surgical removal or orthodontics, should be determined by considering the associated factors such as the crowns, tissues, and age of the patient.

Pressure Dependence of Molar Volume near the Melting Point in Benzene

The pressure dependence of the molar volume was at constant temperatures close to the melting point in benzene. The molar volume of benzene was calculated using experimental data for the thermal expansivity for constant temperatures of 25℃, 28.5℃, 40℃, and 51℃ at various pressures for both the solid and liquid phases. The predictions are in good agreement with the observed volumes in both the solid and liquid phases of benzene. The predicted values of the molar volume for a constant temperature of 28.5℃in the liquid phase of benzene agree well with experimental data in the literature.

Excess Molar Volumes and Viscosities for Binary Mixtures of 1-Alkoxypropan-2-ols with 1-Butanol, and 2-Butanol at 298.15 K and Atmospheric Pressure

Excess molar volumes Vm^E and kinematic viscosities v have been measured as a function of composition for binary mixtures of propylene glycol monomethyl ether （1-methoxy-2-propanol）, MeOCH2CH（OH）Me, propylene glycol monoethyl ether （1-ethoxy-2-propanol）, EtOCH2CH（OH）Me, propylene glycol monopropyl ether （1-propoxy-2-propanol）, PrOCH2CH（OH）Me, propylene glycol monobutyl ether （1-butoxy-2-propanol）, BuOCH2CH（OH）Me, and propylene glycol tert-butyl ether （1-tert-butoxy-2-propanol）, t-BuOCH2CH（OH）Me with 1-butanol, and 2-butanol, at 298.15 K and atmospheric pressure. The excess molar volumes are negative across the entire range of composition for all the systems with 1-butanol, and positive for the systems 2-butanol＋ 1-methoxy-2-propanol, and ＋1-propoxy-2-propanol, negative for the systems 2-butanol＋1-butoxy-2-propanol, and change sign for the systems 2-butanol＋ 1-ethoxy-2-propanol, and ＋ 1-tert-butoxy-2-propanol. From the experimental data, the deviation in dynamic viscosity η from ∑χiηi has been calculated. Both excess molar volumes and viscosity deviations have been correlated using a Redlich-Kister type polynomial equation by the method of least-squares for the estimation of the binary coefficients and the standard errors.

Density of supercritical CO_2-tetrahydrofuran binary mixture and the partial molar volume of the cosolvent

The densities of supercritical CO2-tetrahydrofuran (cosolvent) binary mixture weremeasured at temperatures in range of 308.15 to 323.15 K and at pressure up to 16.5 MPa.The concentrations of tetrahydrofuran were from 0 to 0.57 mol/L.The partial molar volume of tetrahydrofuran was calculated based on the relationship between the density of the mixture and the concentration of the cosolvent.It is observed that the partial molar volume of the cosolvent is negative and the absolute value decreases with increasing pressure and the concentration of the cosolvent.

Improved method to determine the molar volume and compositions of the NaCl-H_2O-CO_2 system inclusion

On the basis of Parry’s method (1986), an improved method was established to determine the molar volume (Vm) and compositions (X) of the NaCl-H2O-CO2 (NHC) system inclusion. To use this method, the determination of Vm-X only requires three microthermometric data of a NHC inclusion: partial homog-enization temperature (Th ,CO2), salinity (S) and total homogenization temperature (Th). Theoretically, four associated equations are needed containing four unknown parameters: X CO2, XNaCl, Vm and F (volume fraction of CO2 phase in total inclusion when occurring partial homogenization). When they are released, the Vm-X are determined. The former three equations, only correlated with Th ,CO2, S and F, have simplified expressions:XCO2=f1(Th,CO2,S,F),XNaCl=f2(Th,CO2,S,F),Vm=f3(Th,CO2,S,F). The last one is the thermodynamic relationship of X CO2, XNaCl, Vm and Th:f4(XCO2,XNaCl,Vm,Th)=0.Since the above four associated equations are complicated, it is necessary to adopt iterative technique to release them. The technique can be described by:(i) Freely input a F value (0≤F≤1),with Th ,CO2 and S, into the former three equations. As a result,X CO 2,XNaCl and the molar volume value recorded as Vm1 are derived. (ii) Input the X CO2 and XNaCl gotten in the step above into the last equation, and another molar volume value recorded as Vm2 is determined. (iii) If Vm1 is unequal to Vm2, the calculation will be restarted from “(i)”. The iteration is completed until Vm1 is equal to Vm2, which means that the four associated equations are released. Compared to Parry’s (1986) solution method, the improved method is more convenient to use, as well as more accurate to determine X CO 2. It is available for a NHC inlusion whose partial homogenization temperature is higher than clatherate melting temperature and there are no solid salt crystals in the inclusion at parital homogenization.

Hydrogen bonding interactions between ethylene glycol and water:density,excess molar volume,and spectral study

Studies of the density and the excess molar volume of ethylene glycol (EG)-water mixtures were carried out to illustrate the hydrogen bonding interactions of EG with water at different temperatures. The re-sults suggest that a likely complex of 3 ethylene glycol molecules bonding with 4 water molecules in an ethylene glycol-water mixture (EGW) is formed at the maximal excess molar volume,which displays stronger absorption capabilities for SO2 when the concentration of SO2 reaches 400×10?6 (volume ratio) in the gas phase. Meanwhile,FTIR and UV spectra of EGWs were recorded at various EG concentra-tions to display the hydrogen bonding interactions of EG with water. The FTIR spectra show that the stretching vibrational band of hydroxyl in the EGWs shifts to a lower frequency and the bending vibra-tional band of water shifts to a higher frequency with increasing the EG concentration,respectively. Furthermore,the UV spectra show that the electron transferring band of the hydroxyl oxygen in EG shows red shift with increasing the EG concentration. The frequency shifts in FTIR spectra and the shifts of absorption bands in UV absorption spectra of EGWs are interpreted as the strong hydrogen bonding interactions of the hydrogen atoms in water with the hydroxyl oxygen atoms of EG.

Ectopic Molar Pregnancy with Coexistent Normal Intrauterine Pregnancy: A Report of an Unusual Diagnosis managed in Yaoundé Gyneco-Obstetric and Pediatric Hospital, Cameroon

Background: Heterotopic pregnancy is a very rare event in a natural cycle. Its incidence is rising mostly due to induction of ovulation or Assisted Reproductive Technique. Most ectopic in heterotopic pregnancies are localized in the fallopian tubes. The occurrence of molar tubal ectopic pregnancy coexisting with intrauterine pregnancy is uncommon and consequently not often considered a diagnostic possibility. Case Report: We report the case of a 25-year-old woman, gravida 4 para 1, who complained of vaginal spotting and lower abdominal pain after 6 weeks of amenorrhea following clomiphene citrate ovarian stimulation. Transvaginal Ultrasonography revealed an intrauterine pregnancy and an unruptured left tubal ectopic pregnancy. She underwent successful laparoscopic salpingectomy while the intra-uterine pregnancy was allowed to continue. The ectopic pregnancy tissue histology reported an ectopic partial molar pregnancy. She subsequently had a normal vaginal delivery at 39 weeks and 3 days and her follow-up was uneventful. Conclusion: Heterotopic pregnancy is a rare but life-threatening condition. It should be suspected in a pregnant woman with a risk factor of multiple gestations who presents vaginal bleeding and lower abdominal pain in the context of early pregnancy. Laparoscopic surgery is effective for confirming the diagnosis and treating the ectopic component. Routine histological examination of tubal specimens must be taken very seriously because some findings like molar pregnancies may require specific management.

Five-year outcomes of immediate implant placement for mandibular molars with and without chronic apical periodontitis:A retrospective study

BACKGROUND Most physicians consider molars with chronic apical periodontitis(CAP)lesions as contraindications for immediate implant placement.At the patient’s request,we perform immediate implant placement of the mandibular molars with CAP in clinical practice.AIM To retrospectively analyze and compare the 5-year outcomes of immediate implant placement of the mandibular molars with CAP and those without obvious inflammation.METHODS The clinical data of patients with immediate implant placement of the mandibular molars in the Department of Oral and Maxillofacial Surgery,the Affiliated Hospital of Qingdao University,from June 2015 to June 2017 were collected.The patients were divided into CAP(n=52)and no-CAP(n=45)groups.Changes in bone mineral density and bone mass around implants were analyzed 5 years after implant restoration.RESULTS At 5 years after implantation,the peri-implant bone mineral density was 528.2±78.8 Hounsfield unit(HU)in the CAP group and 562.6±82.9 HU in the no-CAP group(P=0.126).Marginal bone resorption around implants did not differ significantly between the two groups,including buccal(P=0.268)or lingual(P=0.526)resorption in the vertical direction or buccal(P=0.428)or lingual(P=0.560)resorption in the horizontal direction.Changes in the peri-implant jump space did not differ significantly between the two groups,including the buccal(P=0.247)or lingual(P=0.604)space in the vertical direction or buccal(P=0.527)or lingual(P=0.707)space in the horizontal direction.The gray value of cone-beam computed tomography measured using Image J software can reflect the bone mineral density.In the CAP area,the gray values of the bone tissue immediately and 5 years after implant placement differed significantly from those of the surrounding bone tissue(P<0.01).CONCLUSION The results of this study suggest that immediate implant placement of the mandibular molars with CAP can achieve satisfactory 5-year clinical results,without significant differences in the complications,survival rate,or bone tissue condition from the no-CAP mandibular molars.

Root Canal System Variation in Mandibular Second Molar: Middle-Mesial Canal

Middle-mesial canals in mandibular molars are present in the population depending on age, sex and ethnicity. However, limited literature alludes to its prevalence. Troughing procedures may enhance identification, cleaning and shaping. This case report expresses the recognition and management of middle-mesial canal in a mandibular second molar of 24 years old Hispanic-Latino male.

Transfer learning-based super-resolution in panoramic models for predicting mandibular third molar extraction difficulty: a multi-center study

Background:This study aims to predict the extraction difficulty of mandibular third molars based on panoramic images using transfer learning while employing super-resolution(SR)technology to enhance the feasibility and validity of the prediction.Methods:We reviewed a total of 608 preoperative mandibular third molar panoramic radiographs from two medical facilities:the First Affiliated Hospital of Zhengzhou University(n=509;456 in the training set and 53 in the test set)and the Henan Provincial Dental Hospital(n=99 in the validation set).We conducted a deep-transfer learning network on high-resolution(HR)panoramic radiographs to improve the longitudinal resolution of the images and obtained the SR images.Subsequently,we constructed models named Model-HR and Model-SR using high-dimensional quantitative features extracted through the Least Absolute Shrinkage and Selection Operator method.The models’performances were evaluated using the receiver operating characteristic curve(ROC).To assess the reliability of the model,we compared the results from the test set with those of three dentists.Results:Model-SR outperformed Model-HR(area under the curve(AUC):0.779,sensitivity:85.5%,specificity:60.9%,and accuracy:79.8%vs.AUC:0.753,sensitivity:73.7%,specificity:73.9%,and accuracy:73.7%)in predicting the difficulty of extracting mandibular third molars.Both Model-HR(AUC=0.821,95%CI 0.687–0.956)and Model-SR(AUC=0.963,95%CI 0.921–0.999)demonstrated superior performance compared to expert dentists(highest AUC=0.799,95%CI 0.671–0.927).Conclusions:Model-SR yielded superior predictive performance in determining the difficulty of extracting mandibular third molars when compared with Model-HR and expert dentists’visual assessments.

新型材料3M Ketac Molar超硬玻璃离子与银汞合金充填后牙窝洞的对比

背景:近年来,传统的银汞合金充填修复的缺点已日益显现。寻找其替代产品是目前研究的热点,而新型材料3M Ketac Molar超硬玻璃离子充填修复的报道尚不多见。目的:比较3M Ketac Molar超硬玻璃离子与银汞合金充填后牙窝洞的临床效果。设计、时间及地点:回顾性分析,对照观察,于2002-02/2006-04在南昌市第九医院口腔科完成。对象:选择南昌市第九医院口腔科门诊就诊的后牙龋病患者187例307颗牙,平均年龄45岁。方法:用3M Ketac Molar后牙超硬玻璃离子充填162颗后牙窝洞,银汞合金充填145颗后牙窝洞,连续观察1,2年,评价其临床效果,以充填材料完好,边缘密合,无继发龋、无磨损者为治疗成功。主要观察指标:两种材料修复后牙窝洞1,2年临床疗效。结果:3M Ketac Molar后牙超硬玻璃离子和银汞合金充填1年复查,成功率分别为96.30%,91.03%;2年复查,成功率分别为91.36%,90.34%。两组疗效差异无显著性意义(P>0.05)。结论:3M Ketac Molar后牙超硬玻璃离子既能修复缺损牙面,而且改善美观,防龋,是替代银汞合金的较好材料。

Neuroprotection by resveratrol-glucuronide and quercetin-glucuronide via binding to polyphenol-and glycosaminoglycan-binding sites in the laminin receptor

The dietary polyphenolic compounds resveratrol and quercetin prevent neurodegenerative diseases in experimental models;however, they reach the brain only in nanomolar concentrations in the glucuronidated and sulfated forms, and not as the aglycone parent form(Pasinetti et al.,2015).

Prevalence of Taurodontism in a Tertiary Hospital in Ghana

Background: Taurodontism is one of the most significant deviations from the normal tooth morphology affecting the molars in both primary and permanent dentition. Taurodontism refers to the Enlargement of the pulp chamber, resulting in its bifurcation pushed toward the apex of a tooth’s root. This study evaluated the prevalence of Taurodontism from radiographs taken at the University of Ghana Dental School Oral Radiology Unit from January 2017 to December 2022. Methodology: In this cross-sectional study, panoramic and periapical radiographs of 1000 randomly selected patients who visited the Oral Radiology Unit from January 2017 to December 2022. Radiographs were evaluated for apically displaced pulp chamber. Data was statistically evaluated, and the chi-square test was employed to assess the prevalence of taurodontism in the upper and lower jaws (p Results: Taurodontism was found in 171 radiographs giving it a prevalence of 17.1% of which 57% (98 radiographs) were from females and 43% (73 radiographs) were from males. This finding was not significant (p > 0.05). Taurodontism occurred more in the maxilla (289 teeth, 80.7%) compared to the mandible molars (186 teeth, 64.3%) giving it a ratio of 1.6:1. This finding was highly significant (p Conclusion: Taurodontism is relatively common in the Ghanaian population affecting more females compared to males according to this study. Further studies using a large sample need to be carried out to determine its incidence in the general community.