Electrode process of La(Ⅲ) in molten LiCl-KCl

The electrode process of La(Ⅲ) at Mo electrode in the molten LiCl-KCl for temperatures ranging from 683 K to 773 K was studied by cyclic voltammetry and chronopotentiometry,respectively.The results showed that in the molten LiCl-KCl,reduction of La(Ⅲ) occurred in a step with a global exchange of three electrons.Cyclic voltammetry studies indicated that at a sweep rate lower than 0.2 V/s,the electroreduction of La(Ⅲ) to lanthanum metal was reversible and controlled by diffusion of La(Ⅲ).However,the process b...

Preparation of Mg-Yb alloy film by electrolysis in the molten LiCl-KCl-YbCl_3 system at low temperature

The electrochemical behavior of Yb3+ and electrodeposition of Mg-Yb alloy film at solid magnesium cathode in the molten LiCl-KCl-YbCl3(2 wt.%) system at 773 K was investigated.Transient electrochemical techniques,such as cyclic voltammetry,chronopotentiometry and chronoamperometry were used in order to explore the deposition mechanism of Yb.The reduction process of Yb3+ is stepwise reactions which are single-electron and double-electron reversible charge transfer reactions.The speed control step was a diffu...

Direct electrochemical N-doping to carbon paper in molten LiCl-KCl-Li3N

Graphite materials are widely used as electrode materials for electrochemical energy storage.N-doping is an effective method for enhancing the electrochemical properties of graphite.A novel one-step N-doping method for complete and compact carbon paper was proposed for molten salt electrolysis in the Li Cl-KCl-Li3 N system.The results show that the degree of graphitization of carbon paper can be improved by the electrolysis of molten salts,especially at 2.0 V.Nitrogen gas was produced at the anode and nitrogen atoms can substitute carbon atoms of carbon paper at different sites to create nitrogen doping during the electrolysis process.The doping content of N in carbon paper is up to 13.0 wt%.There were three groups of nitrogen atoms,i.e.quaternary N(N-Q),pyrrolic N(N-5),and pyridinic N(N-6)in N-doping carbon paper.N-doping carbon paper as an Al-ion battery cathode shows strong charge-recharge properties.

Effect of fluoride addition on electrochemical behaviors of V(Ⅲ) in molten LiCl-KCl

X-ray photoelectron spectroscopy(XPS)and Raman spectroscopy were used to analyze the complexes in LiCl−KCl eutectic salt containing VCl_(3) and KF.The additional fluoride ions would replace chloride ions and combine with V(Ⅲ)to form VF_(6)^(3-).The electrochemical behavior of V(Ⅲ)was evaluated under condition of the molar concentration ratio of F−to Vn+(α)equal to 0:1,1:1,2:1,5:1,20:1 and 50:1,respectively.The results showed that a new reduction step appeared:VF_(6)^(3-)→V^(2+),and the reduction mechanism of vanadium ions became more complicated.The metallic vanadium was deposited on the tungsten electrode at−2.90 V in the LiCl−KCl melts for 6 h,and the products were characterized by SEM−EDS.It was indicated that the particle size of the product decreased with adding fluoride ions for the forming of the coordination compound VF_(6)^(3-).

Electrochemical codeposition of typical α+β phases Mg-Li alloys from the molten LiCl-KCl-MgCl_2 system

Electrochemical codeposition of Mg-Li alloys on molybdenum electrodes was investigated in LiCl-KCl（50 wt.%：50 wt.%） melts containing different concentrations of MgCl2 at 973 K.Cyclic voltammograms show that the underpotential deposition of lithium on pre-deposited magnesium leads to the formation of liquid Mg-Li alloys.The deposition potentials of Mg（II） and Li（I） ions gradually near each other with MgCl2 concentration decreasing.Mg-Li alloys with typical α ＋ β phases could be obtained by potentiostatic electrolysis from LiCl-KCl melts containing 5 wt.% MgCl2 at -2.25 V vs.Ag/AgCl（cathodic current density 1.70 A·cm-2） for 2.5 h.α phase, α ＋ β phases, and β phase Mg-Li alloys with different lithium contents were obtained by potentiostatic electrolysis from LiCl-KCl melts with the different concentrations of MgCl2.The samples were characterized by X-ray diffraction and scanning electron microscopy.

LiCl-KCl共晶熔盐中金属铀与氯化锌的反应行为及机理

为探究氯化锌(ZnCl2)与金属铀制备LiCl-KCl-UCl3初始熔盐体系的反应过程,本工作拟在500℃下的LiCl-KCl共晶熔盐中,首先对可能反应进行热力学计算,确定可能反应路径;再通过循环伏安法和原位吸收光谱法原位监测金属铀与ZnCl2的反应过程,并观察反应过程中熔盐的颜色变化,结合电感耦合等离子体质谱(ICP-MS)分析样品中元素含量的变化,对反应产物进行X射线衍射(XRD)、扫描电镜能谱分析(SEM-EDS)表征,综合确定反应行为和反应机制。研究结果表明:在金属铀与ZnCl2的反应过程中,Zn(Ⅱ)直接将铀金属氧化为U(Ⅲ),生成的Zn金属在铀金属表面形成U-Zn合金。ZnCl2与金属铀制备的电解精炼初始熔盐体系LiCl-KCl-UCl3过程,反应在240 min达到平衡,最终Zn质量分数维持在0.01%。

Ni基高温合金在LiCl-KCl熔盐中的腐蚀行为研究

熔盐电解精炼是乏燃料干法后处理的核心工艺单元,其反应容器需在高温、LiCl-KCl熔盐环境下长期服役,活泼合金元素Cr的选择性溶解使得钝化Cr_(2)O_(3)保护膜难以生成,结构材料面临严重的腐蚀问题,严重阻碍了干法后处理技术的工程化应用。Ni基高温合金在高温氯化物熔盐中的热力学性质稳定,是电解精炼反应容器潜在的候选材料,然而目前Mo、W等关键合金元素对Ni基高温合金在LiCl-KCl熔盐中的耐腐蚀性能影响暂不明确。采用浸泡腐蚀的方法,研究了Haynes 230、Inconel 625、GH 3535、Inconel 690和GH 4169五种Ni基高温合金在550℃、氩气气氛下LiCl-KCl熔盐中的腐蚀行为,采用X射线衍射、扫描电子显微镜及能谱分析对腐蚀产物的组成和形貌进行了分析。研究结果表明,五种Ni基高温合金在与LiClKCl熔盐相互作用的过程中均发生腐蚀失重,失重情况为Inconel 625>GH 3535>Haynes 230>Inconel690>GH 4169。其中Inconel 625和GH 4169合金在基体近表层生成了富Mo氧化膜,导致外层(Cr,Fe)2O3与基体的热相容性变差,有明显的脱落趋势。相比高Cr含量的Inconel 690合金发生严重的电化学溶解,低Cr的GH 3535合金外层(Cr,Fe)_(2)O_(3)含量低,抗氧化能力也明显降低,使得氧向基体内部渗入。而Haynes230合金外表面生成了富W的氧化物,有效地阻挡了Cl^(-)的侵蚀,在以上五种Ni基高温合金中具有最好的耐腐蚀性能。

Dynamic simulation analysis of molten salt reactor-coupled air-steam combined cycle power generation system

A nonlinear dynamic simulation model based on coordinated control of speed and flow rate for the molten salt reactor and combined cycle systems is proposed here to ensure the coordination and stability between the molten salt reactor and power system.This model considers the impact of thermal properties of fluid variation on accuracy and has been validated with Simulink.This study reveals the capability of the control system to compensate for anomalous situations and maintain shaft stability in the event of perturbations occurring in high-temperature molten salt tank outlet parameters.Meanwhile,the control system’s impact on the system’s dynamic characteristics under molten salt disturbance is also analyzed.The results reveal that after the disturbance occurs,the controlled system benefits from the action of the control,and the overshoot and disturbance amplitude are positively correlated,while the system power and frequency eventually return to the initial values.This simulation model provides a basis for utilizing molten salt reactors for power generation and maintaining grid stability.

Growth kinetics of titanium carbide coating by molten salt synthesis process on graphite sheet surface

The synthesis of carbide coatings on graphite substrates using molten salt synthesis(MSS),has garnered significant interest due to its cost-effective nature.This study investigates the reaction process and growth kinetics involved in MSS,shedding light on key aspects of the process.The involvement of Ti powder through liquid-phase mass transfer is revealed,where the diffusion distance and quantity of Ti powder play a crucial role in determining the reaction rate by influencing the C content gradient on both sides of the carbide.Furthermore,the growth kinetics of the carbide coating are predominantly governed by the diffusion behavior of C within the carbide layer,rather than the chemical reaction rate.To analyze the kinetics,the thickness of the carbide layer is measured with respect to heat treatment time and temperature,unveiling a parabolic relationship within the temperature range of 700-1300℃.The estimated activation energy for the reaction is determined to be 179283 J·mol^(-1).These findings offer valuable insights into the synthesis of carbide coatings via MSS,facilitating their optimization and enhancing our understanding of their growth mechanisms and properties for various applications.

Etching Mechanism of Ti_(3)C_(2)Cl_(2) MXene Phases by CuCl_(2)-Lewis Molten Salt Method

We described a method for obtaining fluorine-free Ti_(3)C_(2)Cl_(2)MXene phases by melting copper in CuCl_(2)instead of aluminum in Ti_(3)AlC_(2).XRD results show that when molten salt CuCl_(2)etches Ti_(3)AlC_(2),it forms an intermediate product Ti_(3)CuC_(2),and then reacts with Ti_(3)CuC_(2)to obtain Ti_(3)C_(2)Cl_(2).The reaction of Ti_(3)AlC_(2)and CuCl_(2)at a temperature of 800℃for 2 h to obtain Ti_(3)C_(2)Cl_(2)with an optimal lamellar structure is shown in SEM results.The pseudopotential plane-wave(PP-PW)method is used to calculate on the electronic structure.The etching mechanism is investigated by the total energies of each substance.The chemical reaction of Ti_(3)AlC_(2)and CuCl_(2)will first become Ti_(3)CuC_(2)and Cu,and then become Ti_(3)C_(2)Cl_(2)during the Lewis acid etching process,which are consistent with the experimental results.

Preliminary safety analysis for heavy water-moderated molten salt reactor

The heavy water-moderated molten salt reactor(HWMSR)is a newly proposed reactor concept,in which heavy water is adopted as the moderator and molten salt dissolved with fissile and fertile elements is used as the fuel.Issues arising from graphite in traditional molten salt reactors,including the positive temperature coefficient and management of highly radio-active spent graphite waste,can be addressed using the HWMSR.Until now,research on the HWMSR has been centered on the core design and nuclear fuel cycle to explore the viability of the HWMSR and its advantages in fuel utilization.However,the core safety of the HWMSR has not been extensively studied.Therefore,we evaluate typical accidents in a small modular HWMSR,including fuel salt inlet temperature overcooling and overheating accidents,fuel salt inlet flow rate decrease,heavy water inlet temperature overcooling accidents,and heavy water inlet mass flow rate decrease accidents,based on a neutronics and thermal-hydraulics coupled code.The results demonstrated that the core maintained safety during the investigated accidents.

Electrochemical behavior of Fe(Ⅲ)in Na_(2)SiO_(3)-SiO_(2)-Fe_(2)O_(3)molten salt

The high-temperature requirement for liquid iron smelting via molten oxide electrolysis presents significant challenges.This study investigates the electrochemical reduction of Fe(Ⅲ)in a novel low-temperature electrolyte,Na_(2)SiO_(3)-SiO_(2)-Fe_(2)O_(3),utilizing cyclic voltammetry and square wave voltammetry techniques.The results show that Fe(Ⅲ)reduction occurs in two steps:Fe(Ⅲ)+e^(−)→Fe(Ⅱ),Fe(Ⅱ)+2e^(−)→Fe,and that the redox process of Fe(Ⅲ)/Fe(Ⅱ)at the tungsten electrode is an irreversible reaction controlled by diffusion.The diffusion coefficients of Fe(Ⅲ)in the molten Na_(2)SiO_(3)-SiO_(2)-Fe_(2)O_(3)in the temperature range of 1248–1278 K are between 1.86×10^(−6)cm^(2)/s and 1.58×10^(−4)cm^(2)/s.The diffusion activation energy of Fe(Ⅲ)in the molten salt is 1825.41 kJ/mol.As confirmed by XRD analysis,potentiostatic electrolysis at−0.857 V(vs.O_(2)/O_(complex)^(2-))for 6 h produces metallic iron on the cathode.

Multidisciplinary treatment of molten aluminum combined burn:An unusual case report

Molten aluminum is among the most common causes of burns in the metal industry.However,only few reports are available on molten aluminum injuries.Herein,we report an unusual case of molten aluminum burn.The patient had burns not only on the body surface but also in the respiratory tract and esophagus,adding to the difficulty of treatment.Multidisciplinary consultation and cooperation led to the development of a treatment plan for the patient,which included tracheotomy,respiratory management,endoscopic therapy,infection control,and psychological support.To our knowledge,this is the first report of molten aluminum-induced burns involving the face,neck,respiratory tract,esophagus,and eyes.We also describe our experience with multidisciplinary treatment for the management of molten aluminum burns.

A general descriptor for guiding the electrolysis of CO_(2)in molten carbonate

Molten carbonate is an excellent electrolyte for the electrochemical reduction of CO_(2)to carbonaceous materials.However,the electrolyte–electrode-reaction relationship has not been well understood.Herein,we propose a general descriptor,the CO_(2)activity,to reveal the electrolyte–electrode-reaction relationship by thermodynamic calculations and experimental studies.Experimental studies agree well with theoretical predictions that both cations(Li^(+),Ca^(2+),Sr^(2+)and Ba^(2+))and anions(BO_(2)^(-),Ti_(5)O_(14)^(8-),SiO_(3)^(2-))can modulate the CO_(2)activity to control both cathode and anode reactions in a typical molten carbonate electrolyzer in terms of tuning reaction products and overpotentials.In this regard,the reduction of CO_(3)^(2-)can be interpreted as the direct reduction of CO_(2)generated from the dissociated CO_(3)^(2-),and the CO_(2)activity can be used as a general descriptor to predict the electrode reaction in molten carbonate.Overall,the CO_(2)activity descriptor unlocks the electrolyte–electrode-reaction relationship,thereby providing fundamental insights into guiding molten carbonate CO_(2)electrolysis.

Molten salt construction of core-shell structured S-scheme CuInS_(2)@CoS_(2) heterojunction to boost charge transfer for efficient photocatalytic CO_(2) reduction

Weak redox ability and severe charge recombination pose significant obstacles to the advancement of CO_(2) photoreduction.To tackle this challenge and enhance the CO_(2) photoconversion efficiency,fabricating well-matched S-scheme heterostructure and establishing a robust built-in electric field emerge as pivotal strategies.In pursuit of this goal,a core-shell structured CuInS_(2)@CoS_(2)S-scheme heterojunction was meticulously engineered through a two-step molten salt method.This approach over the CuInS_(2)-based composites produced an internal electric field owing to the disparity be-tween the Fermi levels of CoS_(2) and CuInS_(2) at their interface.Consequently,the electric field facili-tated the directed migration of charges and the proficient separation of photoinduced carriers.The resulting CuInS_(2)@CoS_(2) heterostructure exhibited remarkable CO_(2) photoreduction performance,which was 21.7 and 26.5 times that of pure CuInS_(2) and CoS_(2),respectively.The S-scheme heterojunc-tion photogenerated charge transfer mechanism was validated through a series of rigorous anal-yses,including in situ irradiation X-ray photoelectron spectroscopy,work function calculations,and differential charge density examinations.Furthermore,in situ infrared spectroscopy and density functional theory calculations corroborated the fact that the CuInS_(2)@CoS_(2) heterojunction substan-tially lowered the formation energy of *COOH and *CO.This study demonstrates the application potential of S-scheme heterojunctions fabricated via the molten salt method in the realm of ad-dressing carbon-related environmental issues.

Plutonium utilization in a small modular molten-salt reactor based on a batch fuel reprocessing scheme

A molten salt reactor(MSR)has outstanding features considering the application of thorium fuel,inherent safety,sustainability,and resistance to proliferation.However,fissile material^(233)U is significantly rare at the current stage,thus it is difficult for MSR to achieve a pure thorium-uranium fuel cycle.Therefore,using plutonium or enriched uranium as the initial fuel for MSR is more practical.In this study,we aim to verify the feasibility of a small modular MSR that utilizes plutonium as the starting fuel(SM-MSR-Pu),and highlight its advantages and disadvantages.First,the structural design and fuel management scheme of the SM-MSR-Pu were presented.Second,the neutronic characteristics,such as the graphite-irradiation lifetime,burn-up performance,and coefficient of temperature reactivity were calculated to analyze the physical characteristics of the SM-MSR-Pu.The results indicate that plutonium is a feasible and advantageous starting fuel for a SM-MSR;however,there are certain shortcomings that need to be solved.In a 250 MWth SM-MSR-Pu,approximately 288.64 kg^(233)U of plutonium with a purity of greater than 90% is produced while 978.00 kg is burned every ten years.The temperature reactivity coefficient decreases from -4.0 to -6.5 pcm K^(-1) over the 50-year operating time,which ensures a long-term safe operation.However,the amount of plutonium and accumulation of minor actinides(MAs)would increase as the burn-up time increases,and the annual production and purity of^(233)U will decrease.To achieve an optimal burn-up performance,setting the entire operation time to 30 years is advisable.Regardless,more than 3600 kg of plutonium eventually accumulate in the core.Further research is required to effectively utilize this accumulated plutonium.

Temperature Drop of Molten Metals in Open Channels

The temperature drop of molten metal flowing in open channels is numerically determined. Rectangular, trapezoidal and triangular geometries are considered. The overall heat transfer coefficients for the bottom, side walls and free surface of the channel have been taken from the literature. For each geometry, the volumetric flow rate, mean residence time and temperature drop as a function of the channel inclination angle were determined. The rectangular and trapezoidal geometries present the smallest temperature drops, while the triangular geometry presents the greatest temperature drop. The factors that most affect this drop are the value of the free surface area of the channel, and the average residence time of the molten metal in the channel.

Effect of the Density of Molten Metal on the Raining Phenomenon in Horizontal Centrifugal Casting

In this work the influence of the density of the molten metal on the emergence of the raining phenomenon in the horizontal centrifugal casting process is numerically studied. Transient 2D numerical simulations were carried out using Computational Fluid Dynamics software. Three molten metals with different density, namely aluminum, iron and lead, and three angular frequencies, namely 50, 66 and 77 rad/s were considered. It is found that the density of the molten metal significantly affects the emergence, transient or permanent, of the rain phenomenon. However, the magnitude and duration of the rain phenomenon depend on the angular frequency of the rotating mold. Likewise, since gravitational forces affect the metal according to its density, the value of the critical rotation speed of the mold is also affected.

Design and Application of Intelligent Control System for Molten Iron Transportation Based on 5G Technology

Molten transport is an important link in the iron and steel enterprise production,involves many complex factors,artificial management is difficult.Therefore,puts forward a kind of molten iron transport wisdom control system based on 5G technology,which mainly contains the intelligent identification tracking system,equipment status collection information acquisition system,locomotive vehicle terminal system,etc.Combined with the analysis of the actual application situation,the system could integrate all the processes and elements of molten iron produc-tion and transportation,realize the integration of operation and management,and also promote the improvement of the turnover efficiency of molten iron tank,reduce the demand for personnel,and reduce the labor cost.

LiCl-KCl熔盐中Pu^(3+)在Al阴极上的电化学行为

基于固体Al阴极分离锕系元素(An)与裂变产物(FP)的电解精炼技术是极具前景的干法后处理流程之一。本研究采用暂态电化学法系统研究了Pu^(3+)在固体Al阴极上的电化学行为。循环伏安法(CV)和方波伏安法(SWV)研究结果表明,Pu^(3+)在Al阴极上可一步还原为合金,且该反应为不可逆,Pu^(3+)与Al形成合金的电位与温度的关系式为E^(θ,*)(Pu^(3+)/PuAl n)(vs.Cl-/Cl_(2))=-2.944+9.84×10^(-4)T。开路计时电位法(OCP)结合相图表明,Pu^(3+)在固体Al阴极上可生成Pu_(3)Al、PuAl、PuAl_(2)、PuAl_(3)和PuAl_(4)五种合金化合物,且计算得到了不同温度时PuAl_(4)的Gibbs生成自由能。