We demonstrate a Q-switched Raman fiber laser using molybdenum disulfide （MoS2） as a saturable absorber （SA）. The SA is assembled by depositing a mechanically exfoliated MoS2 onto a fiber ferrule facet before it i...We demonstrate a Q-switched Raman fiber laser using molybdenum disulfide （MoS2） as a saturable absorber （SA）. The SA is assembled by depositing a mechanically exfoliated MoS2 onto a fiber ferrule facet before it is matched with another clean ferrule via a connector. It is inserted in a Raman fiber laser cavity with a total cavity length of about 8kin to generate a Q-switching pulse train operating at 1560.2nm. A 7.7-kin-long dispersion compensating fiber with 584 ps.nm-i km-1 of dispersion is used as a nonlinear gain medium. As the pump power is increased from 395 m W to 422 m W, the repetition rate of the Q-switching pulses can be increased from 132.7 to 137.4 kHz while the pulse width is concurrently decreased from 3.35μs to 3.03μs. The maximum pulse energy of 54.3 nJ is obtained at the maximum pump power of 422 roW. These results show that the mechanically exfoliated MoS2 SA has a great potential to be used for pulse generation in Raman fiber laser systems.展开更多
An all-fiber mode-locked fiber laser was achieved with a saturable absorber based on a tapered fiber deposited with layered molybdenum selenide(MoSe_2). The laser was operated at a central wavelength of 1558.35 nm wit...An all-fiber mode-locked fiber laser was achieved with a saturable absorber based on a tapered fiber deposited with layered molybdenum selenide(MoSe_2). The laser was operated at a central wavelength of 1558.35 nm with an output spectral width of 2.9 nm, and a pulse repetition rate of 16.33 MHz. To the best of our knowledge, this is the first report on mode-locked fiber lasers using MoSe_2 saturable absorbers based on tapered fibers.展开更多
Passive harmonic mode locking of an erbium-doped fiber laser based on few-layer molybdenum disulfide(MoS2)saturable absorber(SA) is demonstrated. The few-layer MoS2 is prepared by the chemical vapor deposition(CVD) me...Passive harmonic mode locking of an erbium-doped fiber laser based on few-layer molybdenum disulfide(MoS2)saturable absorber(SA) is demonstrated. The few-layer MoS2 is prepared by the chemical vapor deposition(CVD) method and then transferred onto the end face of a fiber connector to form a fiber-compatible Mo S2SA. The 20 th harmonic modelocked pulses at 216-MHz repetition rate are stably generated with a pulse duration of 1.42 ps and side-mode suppression ratio(SMSR) of 36.1dB. The results confirm that few-layer MoS2 can serve as an effective SA for mode-locked fiber lasers.展开更多
利用简单的一步水热法制备了MoS2纳米片并用于修饰不锈钢纤维毡阳极(MoS2-SSFF),与未修饰不锈钢纤维毡阳极(SSFF)和多壁碳纳米管修饰阳极(CNT-SSFF)进行了对比研究。装配MFC运行的测试结果表明,MoS2-SSFF/MFC的功率密度为714 m W/m2,略...利用简单的一步水热法制备了MoS2纳米片并用于修饰不锈钢纤维毡阳极(MoS2-SSFF),与未修饰不锈钢纤维毡阳极(SSFF)和多壁碳纳米管修饰阳极(CNT-SSFF)进行了对比研究。装配MFC运行的测试结果表明,MoS2-SSFF/MFC的功率密度为714 m W/m2,略高于CNT-SSFF/MFC的功率密度693 m W/m2,远高于未修饰SSFF/MFC的功率密度197 m W/m2。利用扫描电子显微镜(SEM)观察到MoS2纳米片呈簇状附着于MoS2-SSFF电极表面,显著增加了电极的比表面积。MoS2纳米片修饰改善了SSFF阳极的生物相容性,修饰电极在循环伏安测试(CV)中表现出良好的氧化还原性能。水热法制备的MoS2纳米片用于修饰阳极是一种高效、经济、简单的阳极修饰方法。展开更多
文摘We demonstrate a Q-switched Raman fiber laser using molybdenum disulfide （MoS2） as a saturable absorber （SA）. The SA is assembled by depositing a mechanically exfoliated MoS2 onto a fiber ferrule facet before it is matched with another clean ferrule via a connector. It is inserted in a Raman fiber laser cavity with a total cavity length of about 8kin to generate a Q-switching pulse train operating at 1560.2nm. A 7.7-kin-long dispersion compensating fiber with 584 ps.nm-i km-1 of dispersion is used as a nonlinear gain medium. As the pump power is increased from 395 m W to 422 m W, the repetition rate of the Q-switching pulses can be increased from 132.7 to 137.4 kHz while the pulse width is concurrently decreased from 3.35μs to 3.03μs. The maximum pulse energy of 54.3 nJ is obtained at the maximum pump power of 422 roW. These results show that the mechanically exfoliated MoS2 SA has a great potential to be used for pulse generation in Raman fiber laser systems.
基金Project supported by the National Key Research and Development Program of China(Grant No.2018YFB0504500)the National Natural Science Foundation of China(Grant Nos.61475171,61705244,61307056,and 61875052)the Natural Science Foundation of Shanghai,China(Grant Nos.17ZR1433900 and17ZR1434200)
文摘An all-fiber mode-locked fiber laser was achieved with a saturable absorber based on a tapered fiber deposited with layered molybdenum selenide(MoSe_2). The laser was operated at a central wavelength of 1558.35 nm with an output spectral width of 2.9 nm, and a pulse repetition rate of 16.33 MHz. To the best of our knowledge, this is the first report on mode-locked fiber lasers using MoSe_2 saturable absorbers based on tapered fibers.
基金supported by the National Natural Science Foundation of China(Grant Nos.61378028,61421002,61475030,and 61377042)the National Basic Research Program of China(Grant No.2012CB315701)the New Century Excellent Talents Program in University,China(Grant No.NCET-13-0092)
文摘Passive harmonic mode locking of an erbium-doped fiber laser based on few-layer molybdenum disulfide(MoS2)saturable absorber(SA) is demonstrated. The few-layer MoS2 is prepared by the chemical vapor deposition(CVD) method and then transferred onto the end face of a fiber connector to form a fiber-compatible Mo S2SA. The 20 th harmonic modelocked pulses at 216-MHz repetition rate are stably generated with a pulse duration of 1.42 ps and side-mode suppression ratio(SMSR) of 36.1dB. The results confirm that few-layer MoS2 can serve as an effective SA for mode-locked fiber lasers.
文摘利用简单的一步水热法制备了MoS2纳米片并用于修饰不锈钢纤维毡阳极(MoS2-SSFF),与未修饰不锈钢纤维毡阳极(SSFF)和多壁碳纳米管修饰阳极(CNT-SSFF)进行了对比研究。装配MFC运行的测试结果表明,MoS2-SSFF/MFC的功率密度为714 m W/m2,略高于CNT-SSFF/MFC的功率密度693 m W/m2,远高于未修饰SSFF/MFC的功率密度197 m W/m2。利用扫描电子显微镜(SEM)观察到MoS2纳米片呈簇状附着于MoS2-SSFF电极表面,显著增加了电极的比表面积。MoS2纳米片修饰改善了SSFF阳极的生物相容性,修饰电极在循环伏安测试(CV)中表现出良好的氧化还原性能。水热法制备的MoS2纳米片用于修饰阳极是一种高效、经济、简单的阳极修饰方法。
