Research on the Application of Electromagnetic Method in the Exploration of Altered Rock-type Gold Deposits in the East Kunlun Metallogenic Belt

Introduction The East Kunlun Orogenic Belt is located in the northeastern part of the Qinghai–Tibet Plateau(Li et al.,2007),stretching from the East Kunlun to the Elashan area in an east–west direction(Guo et al.,2018).It is an important part of the Central Orogenic Belt(Xiong et al.,2023).It is considered one of the important gold mineralization regions in the Tethys tectonic domain(Norbu et al.,2023)and an essential potential base for mineral resources in China.Wulonggou and Gouli gold mines have been discovered successively,earning the reputation of the"Golden Belt of Qinghai Province"(Feng et al.,2004;He et al.,2023).

The first discovery of Xinlong epithermal gold deposit in southern margin of the Bangonghu-Nujiang metallogenic belt: A new expansion of gold prospecting in Northern Tibet

The Xinlong gold deposit is located in Niyma County,Naqu area of Tibet and was discovered by the Institute of Mineral Resources,Chinese Academy of Geological Sciences through the 1∶50000 mineral geological survey.The ore bodies occur in the Zenong Group volcanic rocks in the middle section of the central Lhasa subterrane and are structurally controlled by the NNW-striking faults.Four ore bodies have been found,exhibiting cloddy,dense-sparse,disseminated,and breccia structures.The ore minerals are mainly tetrahedrite group minerals,and other ore minerals include pyrite,chalcopyrite,nevskite,bornite,anglesite,native gold,and silver-gold bearing selenide,etc.The types of alteration are dominated by silicification,as well as middle-and high-graded argillization.The alteration mineral assemblages contain quzrtz,pyrophyllite,and kaolinite.The Zaliela Formation volcanic rocks of Zenong Group are silicified by later hydrothermal fluid with vuggy quartz in some fractured zones.The middle-and high-graded argillization are characterized by pyrophyllitization and kaolinization.The Xinlong gold deposit shows great metallogenetic potentiality and has been revealed by 1∶10000 geological mapping,IP sounding,and trial trenching in the mining area.Combined with the regional metallogenic geological setting,we suppose that a potential epithermal gold belt probably exists in the middle of the Lhasa terrane.The discovery of the Xinlong gold deposit opens a new chapter for the gold prospecting in Northern Tibet.

^40Ar/^39Ar and Rb-Sr Ages of the Tiegelongnan Porphyry Cu-(Au)Deposit in the Bangong Co-Nujiang Metallogenic Belt of Tibet,China:Implication for Generation of Super-Large Deposit

The Tiegelongnan deposit is a newly discovered super-large porphyry-epithermal Cu-（Au） deposit in the western part of the Bangong Co-Nujiang metallogenic belt, Tibet（China）. Field geology and geochronology indicate that the porphyry mineralization was closely related to the Early Cretaceous intermediate-felsic intrusions（ca. 123–120 Ma）. Various epithermal ore and gangue mineral types were discovered in the middle-shallow part of the orebody, indicating the presence of epithermal mineralization at Tiegelongnan. Potassic, propylitic, phyllic and advanced argillic alteration zones were identified. 40Ar/39Ar dating of hydrothermal biotite（potassic zone）, sericite（phyllic zone）, and alunite（advanced argillic zone） in/around the ore-bearing granodiorite porphyry yielded 121.1±0.6 Ma（1σ）, 120.8±0.7 Ma（1σ） and 117.9±1.6 Ma（1σ）, respectively. Five hydrothermal mineralization stages were identified, of which the Stage IV pyrite was Rb-Sr dated to be 117.5±1.8 Ma（2σ）, representing the end of epithermal mineralization. Field geology and geochronology suggest that both the epithermal and porphyry mineralization belong to the same magmatic-hydrothermal system. The Tiegelongnan super-large Cu-（Au） deposit may have undergone a prolonged magmatichydrothermal evolution, with the major mineralization event occurring at ca.120–117Ma.

Geological and Geochemical Constraints on the Newly Discovered Yangchongli Gold Deposit in Tongling Region, Lower Yangtze Metallogenic Belt

The newly discovered Yangchongli gold deposit is a unique independent gold deposit in the Tongling ore-cluster region controlled by the tectonic alteration firstly discovered in the Lower Yangtze Metallogenic Belt （LYMB）. The host magmatic rocks mainly consist of monzodiorite and K-feldspar granite. The LA-ICP-MS U-Pb zircons dating yielded weighted mean 206pb/23SU ages of 140.7 ± 1.8 Ma and 126.4 ±1.2 Ma for the monzodiorite and K-feldspar granite, respectively. Monzodiorites are enriched in Sr, Ba, Rb, and depleted in Y, Yb with high Sr/Y and La/Yb ratios, similar to the geochemical features of adakite, considered as products of differentiation of mafic magmas originating from lithospheric mantle melt/fluids caused by metasomatism during paleo-Pacific Plate subduction in the Mesozic. In contrast, the compositions of K-feldspar granites are A-type granites, indicating an extensional tectonic background. Gold ores hosted in the fracture zone occurred as quartz vein within cataclastic rock. Sulfur and lead isotopes from pyrites show crust-mantle mixing characteristics. Metal components from strata also took part in the gold mineralization, and resulted from two episodes of magmatism that were probably related to tectonic transition from a compressive to an extensional setting between 140-126 Ma, which led to the Mesozoic large-scale polymetallic mineralization events in eastern China.

Geological Fluid Mapping in the Tongling Area:Implications for the Paleozoic Submarine Hydrothermal System in the Middle-Lower Yangtze Metallogenic Belt,East China

The Tongling area is one of the 7 ore-cluster areas in the Middle-Lower Yangtze metallogenic belt, East China, and has tectonically undergone a long-term geologic history from the late Paleozoic continental rifting, through the Middle Triassic continent-continent collision to the Jurassic-Cretaceous intracontinental tectono-magmatic activation. The Carboniferous sedimentary-exhalative processes in the area produced widespread massive sulfides with ages of 303-321 Ma, which partly formed massive pyrite-Cu deposits, but mostly provided significant sulfur and metals to the skarn Cu mineralization associated with the Yanshanian felsic intrusions.To understand the Carboniferous submarine hydrothermal system, an area of about 1046 km^2 was chosen to carry out the geological fluid mapping. Associated with massive sulfide formation, footwall sequences 948 m to 1146 m thick, composed of the Lower Silurian-Upper Devonian sandstone, siltstone and thin-layered shale, were widely altered. This hydrothermal alteration is interpreted to reflect largescale hydrothermal fluid flow associated with the late Paleozoic crustal rifting and subsidence. Three hydrothermal alteration types, i.e., deep-level semiconformable siliclfication （S1）, fracture-controlled quartz-sericite-pyrite alteration （S2-3）, and upper-level sub-discordant quartz-sericite-chlorite alteration （D3）, were developed to form distinct zones in the mapped area. About 50-m thick semiconformable silicification zones are located at -1-km depth below massive sulfides and developed between an impermeable shale caprock （S1） and the underlying Ordovician unaltered limestone. Comparisons with modern geothermal systems suggest that the alteration zones record a sub-seafioor aquifer with the most productive hydrothermal fluid flow. Fracture-controlled quartz-sericite-pyrite alteration formed transgressive zones, which downward crosscut the semiconformable alteration zones, and upwards grade into sub-discordant alteration zones that enveloped no economic stringer- stockwork zones beneath massive sulfides. This transgressive zone likely marks an upfiow path of high- flux fluids from the hydrothermal aquifer. Lateral zonation of the sub-discordant alteration zones and their relationship to overlying massive sulfide lenses suggest lateral flows and diffusive discharging of the hydrothermal fluids in a permeable sandstone sequence. Three large-sized, 14 middle-small massive sulfide deposits, and 40 massive sulfide sites have been mapped in detail. They show regional strata- bound characters and two major styles, i.e., the layered sheet plus strata-bound stringer-style and the mound-style. Associated exhalite and chemical sedimentary rock suites include （1） anhydrite-barite, （2） jasper-chert, （3） Mg-rich mudstone-pyrite shale, （4） barite lens, （5） siderite-Fe-bearing dolomite, and （6） Mn-rich shale-mudstone, which usually comprise three sulfide-exhalite cyclic units in the area.The spatial distribution of these alteration zones （minerals） and associated massive sulfdes and exhalites, and regional variation in δ^34S of hydrothermal pyrite and in δ^18O-δ^34C of hanging wall carbonates, suggest three WNW-extending domains of fluid flow, controlled by the basement faults and syn-depositional faults. Each fluid domain appears to have at least two upflow zones, with estimated even spacing of about 5-8 km in the mapped area. The repeated appearance of sulfide-sulfate or sulfide-carbonate rhythmic units in the area suggests episodically venting of fluids through the upfiow conduits by breaking the overlying seals of the hydrothermal aquifer.

In Situ Analyses of Trace Elements, U–Pb and Lu–Hf Isotopes in Zircons from the Tongshankou Granodiorite Porphyry in Southeast Hubei Province, Middle-Lower Yangtze River Metallogenic Belt, China

The Tongshankou Cu-Mo deposit, located in southeast Hubei province, is a typical skarn–porphyry type ore deposit closely related to the Tongshankou granodiorite porphyry, characterized by a high Sr/Y ratio.Detailed in situ analyses of the trace elements and U–Pb and Lu–Hf isotopes in zircons from the Tongshankou granodiorite porphyry were performed.Scarcely any inherited zircons were observed, and the analyzed zircons yielded highly concordant results with a weighted mean 206Pb/238 U age of 143.5 ± 0.45 Ma（n=20, mean square weighted deviation was 0.75）, which was interpreted to represent the crystallization age of the Tongshankou granodiorite porphyry.The chondrite-normalized rare-earth element pattern was characterized by a slope that steeply rises from the light-group rare-earth elements（LREE） to the heavy-group rare-earth elements（HREE） with a positive Ce-anomaly and inconspicuous Eu-anomaly, which was coincident with the pattern of the zircons from the Chuquicamata West porphyry, Chile.The analyzed zircons also had relatively low 176Hf/177 Hf ratios of 0.282526–0.282604.Assuming t=143 Ma, the corresponding calculated initial Hf isotope compositions（εHf（t）） ranged from-5.6 to-2.9.The results of the in situ analysis of trace elements and U–Pb and Lu–Hf isotopes in zircons from the Tongshankou granodiorite porphyry suggest that a deep-seated process involving a thickened-crust/enriched-mantle interaction may play an important role in the generation of high Sr/Y-ratio magma and potentially in the generation of porphyry Cu-Mo systems.

Major and Trace Elements of Magnetite from the Qimantag Metallogenic Belt: Insights into Evolution of Ore–forming Fluids

Magnetite, as a genetic indicator of ores, has been studied in various deposits in the world. In this paper, we present textural and compositional data of magnetite from the Qimantag metallogenic belt of the Kunlun Orogenic Belt in China, to provide a better understanding of the formation mechanism and genesis of the metallogenic belt and to shed light on analytical protocols for the in situ chemical analysis of magnetite. Magnetite samples from various occurrences, including the ore-related granitoid pluton, mineralised endoskarn and vein-type iron ores hosted in marine carbonate intruded by the pluton, were examined using scanning electron microscopy and analysed for major and trace elements using electron microprobe and laser ablation-inductively coupled plasma-mass spectrometry. The field and microscope observation reveals that early-stage magnetite from the Hutouya and Kendekeke deposits occurs as massive or banded assemblages, whereas late- stage magnetite is disseminated or scattered in the ores. Early-stage magnetite contains high contents of Ti, V, Ga, AI and low in Mg and Mn. In contrast, late-stage magnetite is high in Mg, Mn and low in Ti, V, Ga, AI. Most magnetite grains from the Qimantag metallogenic belt deposits except the Kendekeke deposit plot in the ＂ Skarn ＂ field in the Ca＋AI＋Mn vs Ti＋V diagram, far from typical magmatic Fe deposits such as the Damiao and Panzhihua deposits. According to the （MgO＋MnO）- TiO^-AI203 diagram, magnetite grains from the Kaerqueka and Galingge deposits and the No.7 ore body of the Hutouya deposit show typical characteristics of skarn magnetite, whereas magnetite grains from the Kendekeke deposit and the No.2 ore body of the Hutouya deposit show continuous elemental variation from magmatic type to skarn type. This compositional contrast indicates that chemical composition of magnetite is largely controlled by the compositions of magmatic fluids and host rocks of the ores that have reacted with the fluids. Moreover, a combination of petrography and magnetite geochemistry indicates that the formation of those ore deposits in the Qimantag metallogenic belt involved a magmatic-hydrothermal process.

Mineralization,Geochemistry and Zircon U-Pb Ages of the Paodaoling Porphyry Gold Deposit in the Guichi Region,Lower Yangtze Metallogenic Belt,Eastern China

The newly discovered Paodaoling porphyry Au deposit from the Guichi region, Lower Yangtze River Metallogenic Belt （LYRB）, contains 〉35 tons of Au at an average grade of -1.7 g/t. It is a porphyry ＇Au-only＇ deposit, as revealed by current exploration in the depths, mostly above -400 m, which is quite uncommon among coeval porphyry mineralization along the LYRB. Additionally, there are also Cu-Au bearing porphyries and barren alkaline granitoids in the Paodaoling district. Zircon LA-ICP-MS U-Pb dating of the Cu-Au-bearing porphyries yield an age of 141-140 Ma, falling within the main magmatic stage of the LYRB, whereas the barren granites give an age of 125-120 Ma, coeval with the regional A- type granites. The Cu-Au-bearing porphyries are LILE-, LREE-enriched and HFSE-depleted, typical of arc magmatic affinities. The barren granites are HFSE-enriched, with lower LREE/HREE ratios and pronounced negative Eu anomalies. The Cu-Au-bearing porphyries in the Paodaoling district have high oxygen fugacities and high water content. Pyrite sulfur isotopes of the Paodaoling gold deposit indicate a magmatic-sedimentary mixed source for the ore-forming fluids. Based on the alteration and poly-metal zonation of the deepest exploration drill hole from the Paodaoling Au deposit, we propose that Cu ore bodies could lie at depth beneath the current Au ore bodies. The magmatism and associated Cu-Au mineralization of the Paodaoling district are likely to have formed in a subduction setting, during slab rollback of the paleo-Pacific plate.

Trace Elements in Sphalerite from the Dadongla Zn-Pb Deposit, Western Hunan-Eastern Guizhou Zn-Pb Metallogenic Belt, South China

The western Hunan-eastern Guizhou Zn-Pb metallogenic belt is one of the important Zn-Pb mineralization regions in China.The Dadongla deposit,located in the northeast of Guizhou Province,is one of the typical Zn-Pb deposits in the region and has estimated resources more than 12 million metric tons(Mt)with an average grade of 4.11 wt%Zn+Pb.Its orebodies are hosted in the lower Cambrian Aoxi Formation dolomite,occurring as bedded,para-bedded in shape,and in conformity with the wall rock.The ore mineral assemblage is simple,dominated by sphalerite with minor pyrite and galena,and the gangue minerals are composed of dolomite,calcite with minor bitumen and barite.In view of the lack of geological and geochemical researches,the genesis of Zn-Pb ore is still unclear.Laser ablation-inductively coupled plasma mass spectrometry(LA-ICPMS)spot and mapping analyses were used to obtain sphalerite trace element chemistry in the Dadongla Zn-Pb deposit in Guizhou,China,aiming to constrain its ore genesis.The results show that sphalerite is characterized by the enrichment of Cd,Fe,Ge and Hg,corresponding with that of typical MVT deposits.Four zones were identified in the sphalerite crystal from Dadongla from the center to margin according to the color bands.in which the zone in the center,representing the early ore-stage sphalerite,is characterized by enrichment of Cd relatively,while the zone forming at late ore-stage is enriched in Ge and Hg relatively.The finding was controlled by differential leached metals content in ore-forming fluid from its source rock.Notably,critical element Ge trends to be enriched at the late ore-stage and follows a substitution of 2 Zn^2+(?)Ge^4++□(vacancy).Moreover,the calculated ore-forming temperature ranges from 79.9℃to 177.6℃by the empirical formula,which is similar to that of typical Mississippi Valley-type(MVT)deposits.Compared with the features of trace elements in sphalerite from different types of deposits,together with the geology,the Dadongla deposit belongs to an MVT Zn-Pb deposit.

Basement Characteristics and Crustal Evolution of the Copper-Gold Metallogenic Belt in the Middle and Lower Reaches of the Yangtze River:Some Isotope Constraints

Studies of the Pb, Sr and Nd isotopic composition of Mesozoic intrusive rocks indicate that the basement of the copper-gold metallogenic belt of the middle and lower reaches of the Yangtze River has “two-layer structure” and partly has “multi-layered structure”, and is inhomogeneous and shows the distinct feature of E-W provincialism. The calculated model lead ages (t1) are mostly greater than 2600 Ma, and the model neodymium ages (TDM) vary from 953 to 2276 Ma and concentrate in two time intervals: 1800–2000 Ma and 1200–1600 Ma. It is concluded that the basement of the MBYR is composed of the Late Archaeozoic to Middle Proterozoic metamorphic series and that the crust was initiated in the Archaean and continued to grow in the Early and Middle Proterozoic, and the proportion of new crust formed by mantle differentiation during the Late Proterozoic is low.

PETROGENETIC AND METALLOGENETIC AGES FOR THE PORPHYRY COPPER DEPOSITS IN THE GANGDISE METALLOGENIC BELT IN SOUTHERN TIBET

Recent examination and assessment about the porphyry copper deposits in Gangdise metallogenic belt in southern Tibet have revealed that these porphyry copper deposits are highly prospective. Several methods have been used for the isotopic dating of the Qulong, Tinggong and Chongjiang porphyry copper deposits, which gives out a petrogenetic age of 17.58±0.74Ma (single-zircon dating of SHRIMP), a metallogenetic age of 15.99±0.32Ma (Re-Os isochron dating) and an alteration age ranging between 12.00Ma and 16.5Ma (K-Ar dating). The metallogenetic age is in general agreement with the alteration age. It can be seen that the petrogenetic and metallogenetic ages for the porphyry copper deposits in Gangdise metallogenic belt are noticeably later than the age for the collisional granitic intrusion in this belt. The authors contend that the porphyry copper deposits in the study area were formed in a post-collisional extensional tectonic setting, and are closely related to the delamination of the mountain roots of the orogenic belts and the uplifting of the Qinghai-Tibet Plateau.

TECTONIC SETTING AND METALLOGENESIS OF THE PRINCIPAL SECTORS OF THE TETHYAN EURASIAN METALLOGENIC BELT

Three global metallogenic belts were formed in the world during Mesozoic and post Mesozoic times. Two of them are situated along the western and eastern Pacific margins, and the third one——the Tethyan Eurasian metallogenic belt (TEMB) is related to the domain of Eurasian plate and flanked on the south by the Afro Arabian and Indian plates.The general tectonic evolution of the realm where the TEMB was formed is closely connected with the history of Tethys. The emplacement of ore deposits and the development of regional metallogenic units are related to a definitive time interval and to specific tectonic settings such as: (1) Intracontinental rifting along the northern margin of Gondwana and/or fragments already separated; (2) Oceanic environments (i.e. ophiolite complexes and ocean floor sediments) host podiform chromite deposits, volcano sedimentary cupriferous pyrite deposits (Cyprus type), stratiform manganese deposits, and sporadically PGE deposits; (3) Subduction related settings involve mainly porphyry copper deposits, hydrothermal massive sulphide polymetallic deposits, and epithermal deposits. So far identified mineralization of porphyry copper exceeds in the TEMB over 100 million tons of copper metal; and (4) Collision and post collision continent continent setting includes deposits of lead zinc, antimony, gold, in some sectors tin deposits, as well. The giant deposits of Li pegmatite occur sporadically. The TEMB is almost a continuously mineralized belt, but within it, some sectors display specific features of tectonic settings, association of elements, minerals and morphogenetic types of mineralization.

A geochronological and geochemical study on the granodiorite porphyry and its implication for the mineralization in the Dayaoshan metallogenic belt,Southeastern China

A systematic study combining U-Pb zircon dating,lithogeochemical and Sr-Nd isotopic analyses was carried out upon the Xinping granodiorite porphyry in the Dayaoshan metallogenic belt to understand its petrogenesis and tectonic significance.LA-ICP-MS U-Pb zircon dating yielded a 442.7±5.8 Ma age,indicating that the granodiorite porphyry was emplaced during the Llandovery Silurian of the Early Paleozoic.The granodiorite porphyry shares the same geochemical characteristics such as Eu negative anomaly as other syn-tectonic granite plutons in the region,including the granodiorite porphyry in Dawangding and granite porphyries in the Dali Cu-Mo deposit and Longtoushang old deposit,indicating a similar magma evolution process.The Xinping granodiorite porphyry has high contents of SiO2(67.871.8%)and K2O(1.78-3.42%)and is metaluminous-peraluminous with A/CNK ratios ranging from 0.97 to 1.06,indicative of high-potassium calc-alkaline to calc-alkaline affinity.It is a I-type granite enriched in large ion lithophile elements Rb,Sr,while depleted in Ba and high field-strength element Nb.Tectonically,a collision between the Yunkai Block from the south and the Guangxi Yunnan-North Vietnam Block from the north during the Early Paleozoic was followed by uplifting of the Dayaoshan terrane.The Xinping granodiorite porphyry was likely emplaced during the collision.Sr-Nd isotopic analyses show that the granodiorite porphyry has initial 87Sr/86Sr ratios(Isr)of 0.7080-0.7104,εNd(t)range from-0.08 to-4.09,and t2DM between 1.19 and 1.51 Ga,well within the north-east low-value zone of the Cathaysia block,indicating a Paleoproterozoic Cathaysia basement source and an involvement of under plating mantle magma.Field observations,geochronological data,and 3D spatial distribution all lead to the conclusion that the Early Paleozoic Xinping granodiorite porphyry does not have any metallogenic and temporal relationships with the Xinping gold deposit(which has a Jurassic-Early Cretaceous age based on previous studies)but a close metallogenic relation to W-Mo mineralization.

A Metallogenic Model of Gold Deposits of the Jiaodong Granite-Greenstone Belt

An analysis of trace elements and isotopic geochemistry suggest that the ore-forming materials of gold deposits in the Jiaodong granite-greenstone belt have multiple sources, especially the mantle source. Seismic wave, magnetic and gravity fields show that the crust-mantle structure and its coupling mechanism are the fundamental dynamic causes for the exchange and accumulation of materials and energy in the metallogenic system. Considering the evolution history of the structural setting, the tectono-metallogenic dynamics model of the area can be summarized as follows: (1) occurrence of the greenstone belt during the Archean-Proterozoic-the embryonic form of Au-source system; (2) stable tectonic setting in the Paleozoic-an intermittence in gold mineralization; (3) intensive activation and reformation of the greenstone belt in the Mesozoic-tectono-mineralization and tectono-diagensis; (4) posthumous structural activity in the Cenozoic-destruction of orebodies in the later stage. In the middle and late Indosinian, the Tancheng-Lujiang fault zone cut deeply into the upper mantle so that the ore-bearing fluids migrated to higher layers through the crust-mantle interaction, resulting in alteration and mineralization.

Gravity and Magnetic Evidence for the Geological Setting of Major Mineral Systems of the Main Metallogenic Belts in South China: A Qualitative Analysis

South China is characterized by large-area multistage magmatism.It boasts a huge number of polymetallic deposits such as W-Sn,Cu-Au,rare earth deposits,thus serving as a"giant granary"of metal mineral resources in China(Lüet al.,2021).

Three-dimensional P-wave Velocity Structure Modelling of the Middle and Lower Reaches of the Yangtze River Metallogenic Belt: Crustal Architecture and Metallogenic Implications

In this study,we compiled and analyzed 69310 P-wave travel-time data from 6639 earthquake events.These events(M≥2.0)occurred from 1980 s to June 2019 and were recorded at 319 seismic stations(Chinese Earthquake Networks Center)in the study area.We adopted the double-difference seismic tomographic method(tomo DD)to invert the 3-D P-wave velocity structure and constrain the crust-upper mantle architecture of the Middle and Lower Reaches of the Yangtze River Metallogenic Belt(MLYB).A 1-D initial model extracted from wide-angle seismic profiles was used in the seismic tomography,which greatly reduced the inversion residual.Our results indicate that reliable velocity structure of th e uppermost mantle can be obtained when Pn is involved in the tomography.Our results show that:(1)the pattern of the uppermost mantle velocity structure corresponds well with the geological partitioning:a nearly E-W-trending low-velocity zone is present beneath the Dabie Orogen,in contrast to the mainly NE-trending low-velocity anomalies beneath the Jiangnan Orogen.They suggest the presence of thickened lower crust beneath the orogens in the study area.In contrast,the Yangtze and Cathaysia blocks are characterized by relatively high-velocity anomalies;(2)both the ultra-high-pressure(UHP)metamorphic rocks in the Dabie Orogen and the low-pressure metamorphic rocks in the Zhangbaling dome are characterized by high-velocity anomalies.The upper crust in the Dabie Orogen is characterized by a low-velocity belt,sandwiched between two high velocity zones in a horizontal direction,with discontinuous low-velocity layers in the middle crust.The keel of the Dabie Orogen is mainly preserved beneath its northern section.We infer that the lower crustal delamination may have mainly occurred in the southern Dabie Orogen,which caused the mantle upwelling responsible for the formation of the granitic magmas emplaced in the middle crust as the low-velocity layers observed there.Continuous deep-level compression likely squeezed the granitic magma upward to intrude the upper crustal UHP metamorphic rocks,forming the'sandwich'velocity structure there;(3)high-velocity updoming is widespread in the crust-mantle transition zone beneath the MLYB.From the Anqing-Guichi ore field northeastward to the Luzong,Tongling,Ningwu and Ningzhen orefields,high-velocity anomalies in the crust-mantle transition zone increase rapidly in size and are widely distributed.The updoming also exists in the crust-mantle transition zone beneath the Jiurui and Edongnan orefields,but the high-velocity anomalies are mainly stellate distributed.The updoming high-velocity zone beneath the MLYB generally extends from the crust-mantle transition zone to the middle crust,different from the velocity structure in the upper crust.The upper crust beneath the Early Cretaceous extension-related Luzong and Ningwu volcanic basins is characterized by high velocity zones,in contrast to the low velocity anomalies beneath the Late Jurassic to Early Cretaceous compression-related Tongling ore field.The MLYB may have undergone a compressive-to-extensional transition during the Yanshanian(Jurassic-Cretaceous)period,during which extensive magmatism occurred.The near mantle-crustal boundary updoming was likely caused by asthenospheric underplating at the base of the lower crust.The magmas may have ascended through major crustal faults,undergoing AFC(assimilation and fractional crystallization)processes,became emplaced in the fault-bounded basins or Paleozoic sequences,eventually forming the many Cu-Fe polymetallic deposits there.

Cathodoluminescence and Trace Element Composition of Scheelite from the Middle-Lower Yangtze River Metallogenic Belt(MLYB): Implications for Mineralization and Exploration

The Middle-Lower Yangtze River Metallogenic Belt(MLYB)is known to contain abundant copper and iron porphyry-skarn deposits,with an increasing number of tungsten deposits and scheelite in Fe-Cu deposits being discovered in the MLYB during recent decades.The ore genesis of the newly-discovered tungsten mineralization in the MLYB is poorly understood.We investigate four sets of scheelite samples from tungsten,iron and copper deposits,using CL imaging and LA-ICP-MS techniques to reveal internal zonation patterns and trace element compositions.The REE distribution patterns of four studied deposits show varying degrees of LREE enrichment with negative Eu anomalies.The oxygen fugacity of ore-forming fluid increased in Donggushan,while the oxygen fugacity of ore-forming fluid decreased in Ruanjiawan,Guilinzheng and Gaojiabang.The scheelites from the Donggushan,Ruanjiawan,Guilinzheng and Gaojiabang deposits show enrichment in LREEs and HFSE,with Nb/La ratios ranging from 1.217 to 52.455,indicating that the four tungsten deposits are enriched in the volatile fluorine.A plot of(La/Lu)N versus Mo/δEu can be used to distinguish quartz vein type,porphyry and skarn tungsten deposits.This study demonstrates that scheelite grains can be used to infer tungsten mineralization and are effective in identifying magmatic types of tungsten deposits in prospective mining sites.

Geochemical Characteristics of the Tayuan Volcanic Rocks in the Daxinganling Metallogenic Belt

1 Introduction Daxinganling region is one of the most important nonferrous metal metallogenetic province(Wu et al.,2011;Li et al.,2014).The northern Daxinganling was a geological blank area in China formerly(Li et al.,2017).However,the region has a huge resource potential.Forty metal deposits have been found in the area recently,with

Molybdenite Re-Os,titanite and garnet U-Pb dating of the Magushan skarn Cu-Mo deposit,Xuancheng district,Middle-Lower Yangtze River Metallogenic Belt

The Magushan skarn Cu-Mo deposit is a representative example of the skarn mineralization occurring within the Xuancheng ore district of the Middle-Lower Yangtze River Metallogenic Belt of eastern China.The precise age of an ore deposit is important for understanding the timing of mineralization relative to other geological events in a region and to fully place the formation of a mineral deposit within the geological context of other processes that occur within the study area.Here,we present new molybdenite Re-Os and titanite and andradite garnet U-Pb ages for the Magushan deposit and use these data to outline possible approaches for identifying genetic relationships in geologically complex areas.The spatial and paragenetic relationships between the intrusions,alteration,and mineralization within the study area indicates that the formation of the Magushan deposit is genetically associated with the porphyritic granodiorite.However,this is not always the case,as some areas contain complexly zoned plutons with multiple phases of intrusion or mineralization may be distal from or may not have any clear spatial relationship to a pluton.This means that it may not be possible to determine whether the mineralization formed as a result of single or multiple magmatic/hydrothermal events.As such,the approaches presented in this study provide an approach that allows the identification of any geochronological relationships between mineralization and intrusive events in areas more complex than the study area.Previously published zircon U-Pb data for the mineralization-related porphyritic granodiorite in this area yielded an age of 134.2±1.2 Ma(MSWD=1.4)whereas the Re-Os dating of molybdenite from the study area yielded an isochron age of 137.7±2.5 Ma(MSWD=0.43).The timing of the mineralizing event in the study area was further examined by the dating of magmatic accessory titanite and skarn-related andradite garnet,yielding U-Pb ages of 136.3±2.5 Ma(MSWD=3.2)and 135.9±2.7 Ma(MSWD=2.5),respectively.The dating of magmatic and hydrothermal activity within the Magushan area yields ages around 136 Ma,strongly suggesting that the mineralization in this area formed as a result of the emplacement of the intrusion.The dates presented in this study also provide the first indication of the timing of mineralization within the Xuancheng district.providing evidence of a close genetic relationship between the formation of the mineralization within the Xuancheng district and the Early Cretaceous magmatism that occurred in this area.This in turn suggests that other Early Cretaceous intrusive rocks within this region are likely to be associated with mineralization and should be considered highly prospective for future mineral exploration.This study also indicates that the dating of garnet and titanite can also provide reliable geochronological data and evidence of the timing of mineralization and magmatism,respectively,in areas lacking other dateable minerals(e.g.,molybdenite)or where the relationship between mineralization and magmatism is unclear,for example in areas with multiple stages of magmatism,with complexly zoned plutons,and with distal skarn mineralization.

Deep gold mineralization features of Jiaojia metallogenic belt,Jiaodong gold Province:Based on the breakthrough of 3000 m exploration drilling

Recently,continuous breakthroughs have been made about deep gold prospecting in the Jiaodong gold province area of China.Approximately 5000 t of cumulative gold resources have been explored in Jiaodong,which has thus become an internationally noteworthy gold ore cluster.The gold exploration depth has been increased to about 2000 m from the previous<1000 m.To further explore the mineralization potential of the Jiaodong area at a depth of about 3000 m,the Shandong Institute of Geological Sciences has drilled an exploratory drillhole named“Deep drillhole ZK01”to a depth of 3266 m.Hence,as reported herein,the mineralization characteristics of the Jiaojia metallogenic belt have been successfully documented.ZK01 is,to date,the deepest borehole with an gold intersect in China,and constitutes a significant advance in deep gold prospecting in China.The findings of this study further indicate that the depth interval of 2000 m to 4000 m below the ground surface in the Wuyi Village area incorporates 912 t of inferred gold resources,while the depth interval of 2000 m to 4000 m below the surface across the Jiaodong area possesses about 4000 t of inferred gold resources.The Jiaojia Fault Belt tends to gently dip downward,having dip angles of about 25°and about 20°at vertical depths of 2000 m and 2850 m,respectively.The deep part of the Jiaojia metallogenic belt differs from the shallow and moderately deep parts about fracturing,alteration,mineralization,and tectonic type.The deep zones can generally be categorized from inside outward as cataclastic granite,granitic cataclasite,weakly beresitized granitic cataclasite,beresitized cataclasite,and gouge.These zones exhibit a gradual transitional relation or occur alternately and repeatedly.The mineralization degree of the pyritized cataclastic granite-type ore in the deep part of the Jiaojia metallogenic belt is closely related to the degree of pyrite vein development;that is,the higher the pyrite content,the wider the veins and the higher the gold grade.Compared to the shallow gold ores,the deep-seated gold ores have higher fineness and contain joseite,tetradymite,and native bismuth,suggesting that the deep gold mineralization temperature is higher and that mantle-sourced material may have contributed to this mineralization.ZK01 has also revealed that the deep-seated ore bodies in the Jiaojia metallogenic belt are principally situated above the main fracture plane(gouge)and hosted within the Linglong Granite,contradicting previous findings indicating that the moderately shallow gold ore bodies are usually hosted in the contact zone between the Linglong Granite and Jiaodong Group or meta-gabbro.These new discoveries are particularly significant because they can help correct mineralization prospecting models,determine favorable positions for deep prospecting,and improve metallogenic prediction and resource potential evaluation.