Determining the moment of inertia of triaxial Mars with updated global gravity models

The principal moments of inertia(PMIs)with the principal axes are usually taken as the dynamic figure parameters of Mars;they can be deduced from satellite-observed degree-two gravitational potentials in recent global gravity models and from the dynamic ellipticities resulting from precession observations.These PMIs are natural and significant for the geodetic,geophysical,and geodynamic problems of Mars,which are functions of internal density distributions.In this study,a closed and concise formula for determining the PMIs of the entire planet and its core was developed based on the second invariants of gravity and a multipole expansion.We deduced the polar oblateness J^(2)and the equatorial ellipticity J_(22)of Mars to be 1.9566×10^(−3)and 6.3106×10^(−5),respectively.The preferred principal moments of inertia of Mars are A=2.66589×1036 kg·m^(2),B=2.66775×10^(36)kg·m^(2),and C=2.68125×10^(36)kg·m^(2).These values indicate that Mar is slightly triaxial.The equatorial principal moment of inertia of the Martian core is 1.46008×10^(35)kg·m^(2),accounting for~5.47%of the planet’s PMI;this result is critical for investigating the density and size of the core of Mars,and the planet’s free core nutation.

Uncertainty analysis of ship model vertical center of gravity and transverse moment of inertia test

The usability of test results of ship model vertical center of gravity and transverse moment of inertia is generally depends on its uncertainty. Referring to the guidelines for uncertainty analysis in examination of liquid dynamic recommended by International Towing Tank Conference （ ITTC）, the results were analyzed, bias limits and precision limits were calculated and total uncertainty was estimated. The total uncertainty of six tests on ship model vertical center of gravity is is 0. 16% of the mean value, and the total uncertainty of six tests on ship model transverse moment of inertia is 5.66% of the mean value. The test results show that the total uncertainty of both the multiple tests and the single test is from the precision limits of ship model vertical center of gravity and transverse moment of inertia tests. Thus, the improved measurement system stability can enormously decrease the total uncertainty of multiple tests and the single test.

Spin Cut-off Parameter of Nuclear Level Density and Effective Moment of Inertia

The spin cut-off parameter of the nuclear level density and effective moment of inertia for a large number of nuclei have been determined from analysis of the experimental data on S-wave neutron resonances and spins of lowlying levels. Contrary to claims made before, it is shown the spin cut-off parameter differs considerably from their corresponding rigid body values, and the energy dependence of the effective moment of inertia confirms the interacting fermion model prediction.

The Steiner Formula and the Polar Moment of Inertia for the Closed Planar Motions in Complex Plane

In this paper, the Steiner area formula and the polar moments of inertia were expressed during one-parameter closed planar motions in complex plane. The Steiner points or Steiner normal concepts were described according to whe-ther rotation number was different from zero or equal to zero. The moving pole point was given with its components and its relation to the Steiner point or Steiner normal which was specified. The Steiner formula and the polar moments of inertia were expressed for the inverse motion. The fixed pole point was calculated for the inverse motion. The sagittal motion of a tele-scopic crane was considered as an example. This motion was described by a double hinge consisting of the fixed control panel of the telescopic crane and its moving arm. The results obtained in the first section of this study were applied to this motion.

Moments of Inertia, Magnetic Dipole Moments, and Electric Quadrupole Moments of the Lithium Isotopes

The single-particle Schrödinger fluid model is designed mainly to calculate the moments of inertia of the axially symmetric deformed nuclei by assuming that each nucleon in the nucleus is moving in a single-particle potential which is deformed with time t, through its parametric dependence on a classical shape variable α(t). Also, the Nilsson model is designed for the calculations of the single-particle energy levels, the magnetic dipole moments, and the electric quadrupole moments of axially symmetric deformed nuclei by assuming that all the nucleons are moving in the field of an anisotropic oscillator potential. On the other hand, the nuclear superfluidity model is designed for the calculations of the nuclear moments of inertia and the electric quadrupole moments of deformed nuclei which have no axes of symmetry by assuming that the nucleons are moving in a quadruple deformed potential. Furthermore, the cranked Nilsson model is designed for the calculations of the total nuclear energy and the quadrupole moments of deformed nuclei which have no axes of symmetry by modifying the Nilsson potential to include second and fourth order oscillations. Accordingly, to investigate whether the six p-shell isotopes 6Li, 7Li, 8Li, 9Li, 10Li, and 11Li have axes of symmetry or not, we applied the four mentioned models to each nucleus by calculating their moments of inertia, their magnetic dipole moments, and their electric quadrupole moments by varying the deformation parameter β and the non-axiality parameter γ in wide ranges of values for this reason. Hence for the assumption that these isotopes are deformed and have axes of symmetry, we applied the single-particle Schrödinger fluid model and the Nilsson model. On the other hand, for the assumption that these isotopes are deformed and have no axes of symmetry, we applied the cranked Nilsson model and the nuclear super fluidity model. As a result of our calculations, we can conclude that the nucleus 6Li may be assumed to be deformed and has an axis of symmetry.

On the moment of inertia of a proto neutron star

The influences of σ^＊ and Ф mesons, temperature and coupling constants of nucleons on the moment of inertia of the proto neutron star （PNS） are examined in the framework of relativistic mean field theory for the baryon octet {n, p, A, ∑^-, ∑^,∑^＋,^-, ^0} system. It is found that, compared with that without considering σ^＊ and Ф mesons, the moment of inertia decreases. It is also found that the higher the temperature, the larger the incompressibility and symmetry energy coefficient, and the larger the moment of inertia of a PNS. The influence of temperature and coupling constants of the nucleons on the moment of inertia of a PNS is larger than that of the σ^＊ and Ф mesons.

Prediction of moment of inertia of rotating nuclei

In this study,the mathematical expression formulated by Bohr for the moment of inertia of even-even nuclei based on the hydrodynamical model is modified.The modification pertains to the kinetic energy of the surface oscillations,including the second and third terms of the R-expansion as well as the first term,which had already been modified by Bohr.Therefore,this work can be considered a continuation and support of Bohr's hydrodynamic model.The procedure yields a Bohr formula to be multiplied by a factor that depends on the deformation parameter.Bohr's(modified)formula is examined by applying it on axially symmetric even-even nuclei with atomic masses ranging between 150 and 190 as well as on some triaxial symmetry nuclei.In this paper,the modification of Bohr's formula is discussed,including information about the stability of this modification and the second and third terms of the R-expansion in Bohr's formula.The results of the calculation are compared with the experimental data and Bohr's results recorded earlier.The results obtained are in good agreement with experimental data,with a ratio of approximately 0.7,and are better than those of the unmodified ones.

Improved Units of Measure in Rotational Mechanics

The SI system of units in rotational mechanics yields correct numerical results, but it produces physically incorrect units of measure in many cases. SI units also violate the principle of general covariance—the general rule for defining continuous coordinates and units in mathematics and mathematical physics. After 30+ years of wrestling with these problems, the ultimate authority on units of measure has declared that Newton–meter and Joule are not equivalent in rotational mechanics, as they are in the rest of physics. This article proposes a simple modification to SI units called “Nonstandard International units” (“NI units”) until a better name is agreed upon. NI units yield correct numerical results and physically correct units of measure, and they satisfy the principle of general covariance. The main obstacle to the adoption of NI units is the consensus among users that the radius of rotation should have the unit meter because the radius can be measured with a ruler. NI units assigned to radius should have units meter/radian because the radius is a conversion factor between angular size and circumferential length, as in arclength = rθ. To manage the social consensus behind SI units, the author recommends retaining SI units as they are, and informing users who want correct units that NI units solve the technical problems of SI units.

Earth＇s Temporal Principal Moments of Inertia and Variable Rotation

Based on the gravity field models EGM96 and EIGEN-GL04C, the Earth＇s time-dependent principal moments of inertia A, B, C are obtained, and the variable rotation of the Earth is determined. Numerical results show that A, B, and C have increasing tendencies; the tilt of the rotation axis increases 2.1×10^ 8 mas/yr; the third component of the rotational angular velocity, ω3 , has a decrease of 1.0×10^ 22 rad/s^2, which is around 23% of the present observed value. Studies show in detail that both 0 and ω3 experience complex fluctuations at various time scales due to the variations of A, B and C.

Microscopic Mechanism of Large Fluctuation in Odd-Even Differences in Moments of Inertia for Actinide Nuclei

The experimental large fluctuation in odd-even differences in moments ofinertia of deformed actinide nuclei is investigated using the particle-number conserving (PNC)method for treating the cranked shell model with monopole and quadrupole pairing interactions. PNCcalculations show that the large odd-even difference in moments of inertia mainly comes from theinterference contributions j(μv) from particles in high j intruder orbitals μ and v quite near theFermi surface, which have no counterpart in the BCS formalism. The effective monopole andquadrupole pairing interaction strengths are determined to fit the experimental odd-even differencesin binding energies and bandhead moments of inertia. The experimental results for the variation ofmoments of inertia with rotational frequency ω are reproduced well by the PNC calculation. Thenearly identical experimental moments of inertia between ~(236)U(gsb) and ~(238)U(gsb) at lowfrequencies hω ≤ 0.20 MeV are also reproduced quite well.

Torque Free Axi-Symmetric Gyros with Changing Moments of Inertia

The properties and characteristics of torque free gyros with rotational symmetry and changing moments of inertia are the subject of the subsequent discussion. It shall be understood that the symmetry can be expressed by the notation (A=B) which does not presuppose geometric symmetry, where A and B are the principle moments of inertia about x and y axes respectively. We study the case of a torque free gyro upon which no external torque is acting. The equations of motion are derived when the origin of the xyz-coordinate system coincides with the gyro’s mass center c. This study is useful for the satellites, which have rotational symmetry and changed inertia moments, the antennas and the solar power collector systems.

The principal moments of inertia calculated with the hydrostatic equilibrium figure of the Earth

As an indication of the Earth＇s mass distribution, the principal moments of inertia （PMOI, i.e., A, B, C） of the Earth are the basic parameters in studies of the global dynamics of the earth, like earth nutation, and the geophysics. From the aspect of observation, the PMOI can be calculated from the spherical coefficients of observed gravity field. In this paper, the PMOI are calculated directly according to its definition with the figures of the Earth＇s interior derived by a generalized theory of the hydrostatic equilibrium figure of the Earth. We obtain that the angle between the principal axis of the maximum moment of PMOI and the rotational axis is 0.184~, which means that the other two principal axes are very closely in the equatorial plane. Meanwhile, B-A is 1.60 x 10-5 MR2, and the global dynamical flattening （H） is calculated to be 3.29587 ~ 10-3, which is 0.67% different from the latest observation derived value Hobs（3.273795 × 10 ^-3） （Petit and Luzum, 2010）, and this is a significant improvement from the 1.1% difference between the value of H derived from traditional theories of the figure of the Earth and the value of Hobs. It shows that we can calculate the PMOI and H with an appropriate accuracy by a gener- alized theory of the hydrostatic equilibrium figure of the Earth.

Theoretical and Practical Studies of Determining the Force of the Lifting-Lowering of the Roll Box

The lifting and lowering mechanism of the roll box of the saw gin, being an integral part of the ginning process, is used when starting the electric motor of the saw cylinder until its rated speed is reached to prevent an increase in the load current on it, as well as to start the ginning process. The article defines the kinematics of the movement, and also studies the regularity of the movement of the roll box of the saw gin when lifting it with the help of a pneumatic drive. The kinematics of the roll box movement was determined through experimental studies. Knowing the equation of motion, using the second-order Lagrange equation, the regularity of the change in the lifting force of the roll box was determined. Here the system is closed, its degree of freedom is equal to one. The angle of rotation of the roll box is taken as a generalized coordinate. Numerical results were obtained using the Matlab software environment. The theoretical analysis and graphs for determining the lifting force of the roll box are presented. To study the kinematics of lifting the roll box, a method and a test bench have been developed. According to him, when the roll box was raised, its movement was recorded on video, the image was processed using the After Effect and CorelDraw programs, and the movement of the rod attachment point to the roll box was determined. And also the equation for changing the angle of rotation of the roll box is determined using the Matlab Curve Fiting program.

Moments of inertia of triaxial nuclei in covariant density functional theory

The covariant density functional theory(CDFT)and five-dimensional collective Hamiltonian(5DCH)are used to analyze the experimental deformation parameters and moments of inertia(MoIs)of 12 triaxial nuclei as extracted by Allmond and Wood[J.M.Allmond and J.L.Wood,Phys.Lett.B 767,226(2017)].We find that the CDFT MoIs are generally smaller than the experimental values but exhibit qualitative consistency with the irrotational flow and experimental data for the relative MoIs,indicating that the intermediate axis exhibites the largest MoI.Additionally,it is found that the pairing interaction collapse could result in nuclei behaving as a rigid-body flow,as exhibited in the^(186-192)Os case.Furthermore,by incorporating enhanced CDFT MoIs(factor of f≈1.55)into the 5DCH,the experimental low-lying energy spectra and deformation parameters are reproduced successfully.Compared with both CDFT and the triaxial rotor model,the 5DCH demonstrates superior agreement with the experimental deformation parameters and low-lying energy spectra,respectively,emphasizing the importance of considering shape fluctuations.

Equivalent bending stiffness of simply supported preflex beam bridge with variable cross-section

In order to understand mechanical characters and find out a calculating method for preflex beams used in particular bridge engineering projects, two types of simply supported preflex beams with variable crosssection, preflex beam with alterative web depth and preflex beam with aherative steel flange thickness, are dis- cussed on how to achieve the equivalent moment of inertia and Young＇ s modulus. Additionally, methods of cal- culating the equivalent bending stiffness and post-cracking deflection are proposed. Results of the experiments on 6 beams agree well with the theoretical analysis, which proves the correctness of the proposed formulas.

Mechanical model study of relationship of molecular configuration and multiphase in liquid crystal materials

A mechanical model of liquid crystals （LCs） is applied to study the polymorphism of homologous series of terphenyl compounds. With a senti-experimental molecular orbit method, we calculate the moment of inertia which represents the rotation state to describe the phase transition temperature obtained from experimental data. We propose a novel explanation of the phase sequence or polymorphism of LC materials using the two key parameters, the moment of inertia and critical rotational velocity. The effect of molecular polarity on the appearance of liquid crystalline is also discussed.

Hydrodynamic Analysis of C-start in Crucian Carp

The kinematics of turning maneuvers of startled Crucian Carp (Carassius auratus) are presented. All escape responses observed are C-type fast-starts. The position of the center of mass and the moment of inertia of the fish are calculated. The results show that the position of the center of mass is always at 35% of the length of the fish from the head and the position of the center of mass and moment of inertia can be considered unchanged during C-start of Crucian Carp. Hydrodynamic analysis of the C-start is given based on the kinematics data from our experiments. The C-start consists of three stages. In stage 1, the tail fin of fish rapidly flaps in one direction, and a large moment acts on the fish′s body, which rotates around the center of mass with an angular acceleration. In stage 2, the tail fin flaps more slowly in the opposite direction at slower speed, the fish′s body rotates around the center of mass with angular deceleration and the center of mass of the fish moves along an arc. In stage 3, the moment approximately equals zero, the fish′s body stops rotating and the center of mass the moves along a straight line.

Properties of hyperon stars rotating at Keplerian frequency

The structure and properties of a Keplerian rotating hyperon star with an equation of state （EOS） investigated using the relativistic σ-ω-p model are examined by employing an accurate numerical scheme. It is shown that there is a clear rotating effect on the structure and properties, and that hyperon star matter cannot support a star with a mass larger than 1.9 M~, even a star rotating at the fastest allowed frequency. The constraints of the two known fastest rotating frequencies （716 Hz and 1122 Hz） on the mass and radius of a hyperon star are also explored. ~rthermore, our results indicate that the imprint of the rapid rotation of a hyperon star on the moment of inertia is clear; the backward equatorial redshift, the forward equatorial redshift and the polar redshift can be distinguished clearly, the forward equatorial redshift is always negative; and its figuration is far from a spherical symmetric shape.

Operation and Force Analysis of the Guide Wire in a Minimally Invasive Vascular Interventional Surgery Robot System

To develop a robot system for minimally invasive surgery is significant,however the existing minimally invasive surgery robots are not applicable in practical operations,due to their limited functioning and weaker perception.A novel wire feeder is proposed for minimally invasive vascular interventional surgery.It is used for assisting surgeons in delivering a guide wire,balloon and stenting into a specific lesion location.By contrasting those existing wire feeders,the motion methods for delivering and rotating the guide wire in blood vessel are described,and their mechanical realization is presented.A new resistant force detecting method is given in details.The change of the resistance force can help the operator feel the block or embolism existing in front of the guide wire.The driving torque for rotating the guide wire is developed at different positions.Using the CT reconstruction image and extracted vessel paths,the path equation of the blood vessel is obtained.Combining the shapes of the guide wire outside the blood vessel,the whole bending equation of the guide wire is obtained.That is a risk criterion in the delivering process.This process can make operations safer and man-machine interaction more reliable.A novel surgery robot for feeding guide wire is designed,and a risk criterion for the system is given.

Evaluation of Minimally Processed Apples with Application of Edible Films through Biospeckle

The search for practical eating has been increasing among consumers. Thus, minimally processed （MP） foods, which are fresh, previously cut, washed, sanitized and packed products, may be covered with films so as to keep their quality, reducing the deterioration processes. This paper aimed to evaluate the quality of fresh cut apples covered and uncovered with an edible film, through conventional techniques and through biospeckle which is an alternative method of quality evaluation. That analysis was correlated to methods, such as Hunter L＊, a＊ and b＊ parameters. Total soluble solids （TSS）, total titratable acidity （TTA）, respiration rate and pH, as well as the biospeckle optical technique, were measured through the calculation of the moment of inertia （MI）. Apples were sorted into three sets： samples with sodium alginate edible film, samples with pectin edible film and control samples with no film. In optical tests, a diode laser with a wavelength of 632 nm, a digital camcorder, a computer with image processing and statistical software were used. Results showed that both edible films （alginate and pectin） presented lower MI values, indicating the decrease of the biological activity. The conservation of the products observed through the reduction of biological activity promoted by the films keeps the apple quality for a longer period of time. The biospeckle technique can be related to the intensity of the biological activity of the vegetable tissue.