Distributed fiber optic sensors for tunnel monitoring:A state-of-the-art review

Distributed fiber optic sensors(DFOSs)possess the capability to measure strain and temperature variations over long distances,demonstrating outstanding potential for monitoring underground infrastructure.This study presents a state-of-the-art review of the DFOS applications for monitoring and assessing the deformation behavior of typical tunnel infrastructure,including bored tunnels,conventional tunnels,as well as immersed and cut-and-cover tunnels.DFOS systems based on Brillouin and Rayleigh scattering principles are both considered.When implementing DFOS monitoring,the fiber optic cable can be primarily installed along transverse and longitudinal directions to(1)measure distributed strains by continuously adhering the fiber to the structure’s surface or embedding it in the lining,or(2)measure point displacements by spot-anchoring it on the lining surface.There are four critical aspects of DFOS monitoring,including proper selection of the sensing fiber,selection of the measuring principle for the specific application,design of an effective sensor layout,and establishment of robust field sensor instrumentation.These four issues are comprehensively discussed,and practical suggestions are provided for the implementation of DFOS in tunnel infrastructure monitoring.

Study and application of monitoring plane displacement of a similarity model based on time-series images

In order to compensate for the deficiency of present methods of monitoring plane displacement in similarity model tests,such as inadequate real-time monitoring and more manual intervention,an effective monitoring method was proposed in this study,and the major steps of the monitoring method include:firstly,time-series images of the similarity model in the test were obtained by a camera,and secondly,measuring points marked as artificial targets were automatically tracked and recognized from time-series images.Finally,the real-time plane displacement field was calculated by the fixed magnification between objects and images under the specific conditions.And then the application device of the method was designed and tested.At the same time,a sub-pixel location method and a distortion error model were used to improve the measuring accuracy.The results indicate that this method may record the entire test,especially the detailed non-uniform deformation and sudden deformation.Compared with traditional methods this method has a number of advantages,such as greater measurement accuracy and reliability,less manual intervention,higher automation,strong practical properties,much more measurement information and so on.

Slope deformation partitioning and monitoring points optimization based on cluster analysis

The scientific and fair positioning of monitoring locations for surface displacement on slopes is a prerequisite for early warning and forecasting.However,there is no specific provision on how to effectively determine the number and location of monitoring points according to the actual deformation characteristics of the slope.There are still some defects in the layout of monitoring points.To this end,based on displacement data series and spatial location information of surface displacement monitoring points,by combining displacement series correlation and spatial distance influence factors,a spatial deformation correlation calculation model of slope based on clustering analysis was proposed to calculate the correlation between different monitoring points,based on which the deformation area of the slope was divided.The redundant monitoring points in each partition were eliminated based on the partition's outcome,and the overall optimal arrangement of slope monitoring points was then achieved.This method scientifically addresses the issues of slope deformation zoning and data gathering overlap.It not only eliminates human subjectivity from slope deformation zoning but also increases the efficiency and accuracy of slope monitoring.In order to verify the effectiveness of the method,a sand-mudstone interbedded CounterTilt excavation slope in the Chongqing city of China was used as the research object.Twenty-four monitoring points deployed on this slope were monitored for surface displacement for 13 months.The spatial location of the monitoring points was discussed.The results show that the proposed method of slope deformation zoning and the optimized placement of monitoring points are feasible.

Automatic prediction of time to failure of open pit mine slopes based on radar monitoring and inverse velocity method

Radar slope monitoring is now widely used across the world, for example, the slope stability radar(SSR)and the movement and surveying radar(MSR) are currently in use in many mines around the world.However, to fully realize the effectiveness of this radar in notifying mine personnel of an impending slope failure, a method that can confidently predict the time of failure is necessary. The model developed in this study is based on the inverse velocity method pioneered by Fukuzono in 1985. The model named the slope failure prediction model(SFPM) was validated with the displacement data from two slope failures monitored with the MSR. The model was found to be very effective in predicting the time to failure while providing adequate evacuation time once the progressive displacement stage is reached.

Identifying the spatiotemporal characteristics of individual red bed landslides: a case study in Western Yunnan, China

Strata in red bed areas have typical characteristics of soft-hard interbedding and high sensitivity to water. Under the comprehensive action of internal stratigraphic structure and external hydrological factors, red bed landslides have highly complex spatiotemporal characteristics, presenting significant challenges to the prevention and control of landslide disasters in red bed areas, especially for slope and tunnel engineering projects. In this study, we applied an interdisciplinary approach combining small baseline subset interferometric synthetic aperture radar(SBAS-InSAR), deep displacement monitoring, and engineering geological surveying to identify the deformation mechanisms and spatiotemporal characteristics of the Abi landslide, an individual landslide that occurred in the red bed area of Western Yunnan, China. Surface deformation time series indicated that a basic deformation range developed by March 2020. Based on In SAR results and engineering geological analysis, the landslide surface could be divided into three zones: an upper sliding zone(US), a lower uplifted zone(LU), and a toe zone(Toe). LU was affected by the structure of the sliding bed with variable inclination. Using deep displacement curves combined with the geological profile, a set of sliding surfaces were identified between different lithology. The groundwater level standardization index(GLSI) and deformation normalization index(DNI) showed different quadratic relationships between US and LU. Verification using the Pearson correlation analysis shows that the correlation coefficients between model calculated results and measured data are 0.7933 and 0.7577, respectively, indicating that the DNI-GLSI models are applicable. A fast and short-lived deformation sub stage(ID-Fast) in the initial deformation stage was observed, and ID-Fast was driven by concentrated rainfall.

Reservoir Regulation for Control of an Ancient Landslide Reactivated by Water Level Fluctuations in Heishui River,China

Due to the complex geological processes of Qinghai-Tibet Plateau,numerous deposits,especially the large-scale ancient landslide deposits,are characteristic features of the valleys incised in southwestern China.Intense water level fluctuations since 2011 in Maoergai Reservoir,China,registered the reactivation of Xierguazi ancient landslide,and presented a significant risk to neighboring facilities.Based on detailed field survey and drilling exploration,the landslide was divided into Zone A and Zone B,and other characterizations of landslide were studied as well.To precisely measure the extent of landslide displacement during filling and drawdown stage,surface displacement monitoring system was deployed on the landslide.The monitoring analyses data reveal that reservoir fluctuation is the dominant factor influencing landslide displacement,especially during drawdown stage.Moreover,a future sliding is anticipated in Zone A,while a creep had already existed in Zone B.A reservoir regulation was then established using the lead-lag correlation between reservoir fluctuation and landslide displacement and landslide stability analysis.In the end,the follow-up deformation monitoring demonstrates that the reservoir regulation controlled the landslide effectively.Landslide control by reservoir regulation in Maoergai can serve as a case study for other settlements involved in similar construction activities.

Phase control of ellipsometric interferometer for nanometric positioning system

Development in industry is asking for improved resolution and higher accuracy in dimensional metrology. In this paper,we proposed a control displacement method based on a polarization ellipsometirc interferometer and phase-locked loop technique. The proposed principle was set up. The experimental results of step and step displacements with a step value of 5 nm were presented. We also analyzed the resolution,the potential minimal displacement of the established system. The results show that the position error induced by the ellipticty deviation of the light beam becomes negligible thanks to our signal processing circuit with high-order filter. This method could be useful for many applications in nano dimensional metrology and semiconductor industry.