期刊文献+
共找到13,756篇文章
< 1 2 250 >
每页显示 20 50 100
Absolute partial and total ionization cross sections of carbon monoxide with electron collision from 350 eV to 8000 eV
1
作者 Taj Wali Khan 黄伟哲 +2 位作者 王恩亮 单旭 陈向军 《Chinese Physics B》 SCIE EI CAS CSCD 2024年第4期459-464,共6页
The absolute partial and total cross sections for electron impact ionization of carbon monoxide are reported for electron energies from 350 eV to 8000 eV.The product ions(CO^(+),C^(+),O^(+),CO^(2+),C^(2+),and O^(2+))a... The absolute partial and total cross sections for electron impact ionization of carbon monoxide are reported for electron energies from 350 eV to 8000 eV.The product ions(CO^(+),C^(+),O^(+),CO^(2+),C^(2+),and O^(2+))are measured by employing an ion imaging mass spectrometer and two ion-pair dissociation channels(C^(+)+O^(+)and C^(2+)+O^(+))are identified.The absolute cross sections for producing individual ions and their total,as well as for the ion-pair dissociation channels are obtained by normalizing the data of CO^(+)to that of Ar^(+)from CO-Ar mixture target with a fixed 1:1 ratio.The overall errors are evaluated by considering various kinds of uncertainties.A comprehensive comparison is made with the available data,which shows a good agreement with each other over the energy ranges that are overlapped.This work presents new cross-section data with electron energies above 1000 eV. 展开更多
关键词 electron impact ionization cross sections carbon monoxide ion imaging mass spectrometer
下载PDF
季冻区纳米SiO_(2)改性SAP路面混凝土的耐磨性
2
作者 申爱琴 陈荣伟 +3 位作者 郭寅川 范建航 戴晓倩 丑涛 《材料导报》 EI CAS CSCD 北大核心 2024年第7期56-61,共6页
为解决季冻区高吸水性树脂(SAP)路面混凝土耐磨性下降的问题,通过耐磨性试验探索了纳米SiO_(2)(NS)对季冻区SAP路面混凝土磨损量的影响;采用压汞仪(MIP)和扫描电镜(SEM)研究了冻融前后NS改性SAP路面混凝土孔结构和微观形貌的变化,从细... 为解决季冻区高吸水性树脂(SAP)路面混凝土耐磨性下降的问题,通过耐磨性试验探索了纳米SiO_(2)(NS)对季冻区SAP路面混凝土磨损量的影响;采用压汞仪(MIP)和扫描电镜(SEM)研究了冻融前后NS改性SAP路面混凝土孔结构和微观形貌的变化,从细微观角度阐述其耐磨性的提升机理;并对其微观结构与耐磨性进行相关性分析。研究结果表明,经150次冻融循环之后,掺有3%NS的改性SAP路面混凝土在200 N磨耗负荷下的磨损量较基准下降30.92%,20~50nm的孔占比上升,50~200nm的孔占比下降,总孔隙量和孔隙率减少,界面区裂缝数量和尺寸大幅降低,内部密实性程度显著提高,耐磨性明显增强。 展开更多
关键词 季冻区 路面混凝土纳米二氧化硅 高吸水性树脂 耐磨性
下载PDF
助剂对球形Cu/SiO_(2)催化剂甲醇脱氢制甲酸甲酯反应性能的影响 被引量:1
3
作者 靳钰婷 郭宇伟 +2 位作者 权燕红 赵金仙 任军 《低碳化学与化工》 CAS 北大核心 2024年第2期17-25,共9页
甲醇脱氢制甲酸甲酯是实现甲醇下游产品多元化利用的绿色高效途径,使用助剂对SiO_(2)催化剂进行改性已成为提高目标产物甲酸甲酯收率的有效策略。首先通过溶胶-凝胶法制备了球形SiO_(2)负载Cu催化剂(Cu/SiO_(2)),然后采用旋蒸法引入助... 甲醇脱氢制甲酸甲酯是实现甲醇下游产品多元化利用的绿色高效途径,使用助剂对SiO_(2)催化剂进行改性已成为提高目标产物甲酸甲酯收率的有效策略。首先通过溶胶-凝胶法制备了球形SiO_(2)负载Cu催化剂(Cu/SiO_(2)),然后采用旋蒸法引入助剂制得CuM/SiO_(2)(M=Ce或Al)催化剂,借助N2吸/脱附、扫描电子显微镜(SEM)、H_(2)-N_(2)O滴定和X射线衍射(XRD)等手段对催化剂进行了表征,并将催化剂用于甲醇脱氢制甲酸甲酯反应评价了其催化性能。结果表明,助剂可改变催化剂中活性Cu^(0)物种的含量和表面酸碱性。与Cu/SiO_(2)催化剂相比,CuCe/SiO_(2)催化剂表面Cu颗粒的分散度提高,这促进了活性物种Cu^(0)的形成,同时表面碱性位点减少,抑制了副反应发生,因而CuCe/SiO_(2)催化剂表现出最高的活性。在300℃、0.2 MPa的反应条件下,CuCe/SiO_(2)催化剂的甲醇转化率、甲酸甲酯选择性分别为29.2%、86.3%,甲酸甲酯收率为25.2%,均明显优于文献报道的Cu基催化剂。 展开更多
关键词 甲醇脱氢 Cu基催化剂 球形sio2 甲酸甲酯 助剂
下载PDF
纳米SiO_(2)界面剂对新旧混凝土界面抗渗性能和微观结构影响研究
4
作者 周韬剑 杨才千 +2 位作者 李科锋 曾领雄 许福 《湘潭大学学报(自然科学版)》 CAS 2024年第1期14-23,69,共11页
采用试验的方法探究了纳米SiO_(2)界面剂对新旧混凝土界面劈裂黏结强度和抗渗性能的影响,其使用形式包括喷洒稀释溶液及作为增强相的砂浆界面剂两种方式,并与整体现浇试件及传统界面凿毛组的抗渗性能进行对比分析.同时,借助扫描电子显微... 采用试验的方法探究了纳米SiO_(2)界面剂对新旧混凝土界面劈裂黏结强度和抗渗性能的影响,其使用形式包括喷洒稀释溶液及作为增强相的砂浆界面剂两种方式,并与整体现浇试件及传统界面凿毛组的抗渗性能进行对比分析.同时,借助扫描电子显微镜(SEM)对不同纳米界面剂的黏结面微观结构进行了探究.最后,从界面强度、抗渗性能和微观机理3方面分析了纳米SiO_(2)界面剂对新旧混凝土界面黏结性能的影响.结果表明:两种纳米SiO_(2)界面剂均能不同程度地提高界面黏结强度及其抗渗性能,其中纳米SiO_(2)砂浆界面剂效果明显优于纳米SiO_(2)溶液组,且两者均存在最优掺量,分别为3.75%和2.5%;随着界面粗糙度的增加,黏结试件渗水高度和相对渗透系数逐渐降低;界面相对渗透系数与劈裂强度呈负相关,且相比于劈裂强度,相对渗透系数对界面缺陷更敏感.微观分析结果表明:纳米SiO_(2)的掺入改变了界面过渡区(ITZ)水化产物数量和C-S-H凝胶形貌,有效抑制了界面孔隙网络贯通,使ITZ微观结构更为致密. 展开更多
关键词 界面剂 界面处理 纳米sio2 黏结性能 渗透试验
下载PDF
SiO制备过程添加剂影响及生产改善策略
5
作者 刘志明 袁坤 陈思明 《矿冶》 CAS 2024年第2期271-279,309,共10页
SiO材料是目前锂离子电池硅基负极材料中商业化应用最成熟的材料,SiO材料的工业生产主要采用SiO_(2)与Si的蒸发法工艺,由于反应过程中反应物均为固相(或微熔融相),反应效率偏低,这一问题一直困扰着生产企业。从热力学角度出发,分析不同... SiO材料是目前锂离子电池硅基负极材料中商业化应用最成熟的材料,SiO材料的工业生产主要采用SiO_(2)与Si的蒸发法工艺,由于反应过程中反应物均为固相(或微熔融相),反应效率偏低,这一问题一直困扰着生产企业。从热力学角度出发,分析不同添加剂对SiO_(2)+Si反应过程热力学平衡产物的分布的影响。结果表明,金属Zn对SiO_(2)+Si反应具有较好的促进作用,并针对SiO_(2)与Si固相反应过程物料扩散阻力大导致反应效率偏低的技术难题,提出了通过球团技术强化SiO_(2)+Si反应过程生产改善策略,结果可为SiO实际生产过程提供一定理论参考。 展开更多
关键词 锂离子电池 硅基负极材料 sio 添加剂 球团技术强化
下载PDF
Carbon Monoxide and Respiratory Disorders in Professional Female Fish Smokers at 2 Artisanal Sites in Benin
6
作者 Mênonli Adjobimey Ibrahim Mama Cissé +6 位作者 Fintani Kaki Mariano Steven Sagbohan Perside Fabien Gounongbe Rose Mikponhoue Ayélo Paul Vikkey Hinson 《Occupational Diseases and Environmental Medicine》 2023年第4期175-186,共12页
Introduction: The use of biomass for cooking is a very common practice in Africa and Benin, and is associated with exposure to organic pollutants. The aim of this study was to assess carbon monoxide exposure and respi... Introduction: The use of biomass for cooking is a very common practice in Africa and Benin, and is associated with exposure to organic pollutants. The aim of this study was to assess carbon monoxide exposure and respiratory disorders in women at artisanal fish-smoking sites. Methods: This was a cross-sectional study of women fish smokers at two artisanal fish-smoking sites in Benin. Recruitment was exhaustive. An interview using a respiratory questionnaire inspired by the Union questionnaire, spirometry and carbon monoxide (CO) measurement were carried out. Descriptive analysis and comparison of means using Student’s t-test with a threshold of p = 0.05 were performed. Results: The median age of the 81 people surveyed was 40, with an interquartile range (IQT) of [25 to 75]. The median duration of daily exposure to smoke was 6 h IQT [4, 7]. Of those surveyed, 64 (79.01%) were illiterate and 39 (48.24%) had been working for 20 years. CO levels at the start of activity varied from 89 to 145 ppm in one case and from 40 to 89 ppm in the other. Respiratory symptoms were present in 19 (23.46%);18 (22.22%) had mild airway impairment on spirometry. There was a statistically significant decrease between the mean values of peak expiratory flow (PEF), mean expiratory volume in seconds (FEV1) and forced vital capacity (FVC) before and after exposure to smoke. Conclusion: CO levels are high on fish smoking sites and respiratory problems are common. Improved working conditions are important for these women. 展开更多
关键词 Respiratory Symptoms SPIROMETRY Carbon monoxide Fish Smoking Women
下载PDF
Unraveling the Fundamental Mechanism of Interface Conductive Network Influence on the Fast‑Charging Performance of SiO‑Based Anode for Lithium‑Ion Batteries 被引量:1
7
作者 Ruirui Zhang Zhexi Xiao +6 位作者 Zhenkang Lin Xinghao Yan Ziying He Hairong Jiang Zhou Yang Xilai Jia Fei Wei 《Nano-Micro Letters》 SCIE EI CSCD 2024年第3期53-68,共16页
Progress in the fast charging of high-capacity silicon monoxide(SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion.The construction of an interface conductive network effe... Progress in the fast charging of high-capacity silicon monoxide(SiO)-based anode is currently hindered by insufficient conductivity and notable volume expansion.The construction of an interface conductive network effectively addresses the aforementioned problems;however,the impact of its quality on lithium-ion transfer and structure durability is yet to be explored.Herein,the influence of an interface conductive network on ionic transport and mechanical stability under fast charging is explored for the first time.2D modeling simulation and Cryo-transmission electron microscopy precisely reveal the mitigation of interface polarization owing to a higher fraction of conductive inorganic species formation in bilayer solid electrolyte interphase is mainly responsible for a linear decrease in ionic diffusion energy barrier.Furthermore,atomic force microscopy and Raman shift exhibit substantial stress dissipation generated by a complete conductive network,which is critical to the linear reduction of electrode residual stress.This study provides insights into the rational design of optimized interface SiO-based anodes with reinforced fast-charging performance. 展开更多
关键词 Fast charging sio anode Interface conductive network Ionic transport Mechanical stability
下载PDF
Effects of Chlorine and Chlorine Monoxide on Stratospheric Ozone Depletion 被引量:1
8
作者 Laurie Wei Ibraheem Alelmi Sen Nieh 《Atmospheric and Climate Sciences》 2024年第1期136-153,共18页
This paper presents a system approach of mass balance calculations of ozone and other species under diffusion-convection-reaction processes to study the impacts of major ozone-depleting chemicals, chlorine (Cl) and ch... This paper presents a system approach of mass balance calculations of ozone and other species under diffusion-convection-reaction processes to study the impacts of major ozone-depleting chemicals, chlorine (Cl) and chlorine monoxide (ClO), and the effect of photolysis on ozone concentrations, ozone depletion, total ozone abundance, and ozone layer along the altitude in the stratosphere. The calculated ozone concentrations and profile of the layer followed a similar trend and were generally in good agreement with the measurements above the tropical area. The calculated peak of the layer was at the same mid-stratosphere at Z = 30 km with a peak concentration and total ozone abundance about 20% higher than the measured peak concentration of 8.0 ppm and total abundance of 399 DU. In the presence of Cl and ClO, the calculated ozone concentrations and total abundance were substantially reduced. Cl generally depleted more uniformly of ozone across the altitude, while ClO reduced substantially the ozone in the upper stratosphere and thus shifted the peak of the layer to a much lower elevation at Z = 14 km. Although both ClO and Cl are active ozone-depleting chemicals, ClO was found to have a more pronounced impact on ozone depletion and distribution than Cl. The possible explanations of these interesting phenomena were discussed and elaborated. The approach and calculations in this paper were shown to be useful in providing an initial insight into the structure and behavior of the complex ozone layer. 展开更多
关键词 OZONE Ozone Depletion CHLORINE Chlorine monoxide PHOTOLYSIS Dobson Unit
下载PDF
球形纳米SiO_(2)的制备及其铝热剂的燃烧性能研究
9
作者 陈柏辰 王毅 +1 位作者 宋小兰 安崇伟 《化工新型材料》 CAS CSCD 北大核心 2024年第S01期229-235,共7页
采用溶胶-凝胶法,通过正交试验优化,制备平均粒径为120nm的球形纳米SiO_(2)。采用扫描电子显微镜、透射电子显微镜、X射线衍射仪、红外光谱仪及全自动比表面及孔隙度分析仪等手段对该纳米SiO_(2)进行了表征。将制得的纳米SiO_(2)与Al粉... 采用溶胶-凝胶法,通过正交试验优化,制备平均粒径为120nm的球形纳米SiO_(2)。采用扫描电子显微镜、透射电子显微镜、X射线衍射仪、红外光谱仪及全自动比表面及孔隙度分析仪等手段对该纳米SiO_(2)进行了表征。将制得的纳米SiO_(2)与Al粉和纳米MnO_(2)混合,配制成零氧平衡的复合铝热剂,详细测试了该铝热剂的燃烧性能。结果表明:低温有利于颗粒粒径的控制和分散度的调整。溶液的介电常数对颗粒形成有较大影响。正硅酸乙酯和氨水的浓度与SiO_(2)颗粒大小成正比。BET数据表明,纳米SiO_(2)比表面积较大,为微孔和介孔的混合结构。SiO_(2)的粒度大小对铝热剂的燃烧时间与效率有很大影响。随着SiO_(2)粒径的减小,铝热剂的燃烧压力峰值及增压速率得到了显著的提升,这为纳米SiO_(2)在复合铝热剂中的应用提供了参考。 展开更多
关键词 溶胶-凝胶法 纳米sio 2 铝热剂 燃烧性能
下载PDF
Rational design of F,N-rich artificial interphase via chemical prelithiation initiation strategy enabling high coulombic efficiency and stable micro-sized SiO anodes
10
作者 Quanyan Man Hengtao Shen +3 位作者 Chuanliang Wei Baojuan Xi Shenglin Xiong Jinkui Feng 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第5期224-232,共9页
Silicon monoxide(SiO)is regarded as a potential candidate for anode materials of lithium-ion batteries(LIBs).Unfortunately,the application of SiO is limited by poor initial Coulombic efficiency(ICE)and unsteady solid ... Silicon monoxide(SiO)is regarded as a potential candidate for anode materials of lithium-ion batteries(LIBs).Unfortunately,the application of SiO is limited by poor initial Coulombic efficiency(ICE)and unsteady solid electrolyte interface(SEI),which induce low energy,short cycling life,and poor rate properties.To address these drawbacks of SiO,we achieve in-situ construction of robust and fast-ion conducting F,N-rich SEI layer on prelithiated micro-sized SiO(P-μSiO)via the simple and continuous treatment ofμSiO in mild lithium 4,4′-dimethylbiphenyl solution and nonflammable hexafluorocyclotriphosphazene solution.Chemical prelithiation eliminates irreversible capacity through pre-forming inactive lithium silicates.Meanwhile,the symbiotic F,N-rich SEI with good mechanical stability and fast Li^(+)permeability is conductive to relieve volume expansion ofμSiO and boost the Li+diffusion kinetics.Consequently,the P-μSiO realizes an impressive electrochemical performance with an elevated ICE of 99.57%and a capacity retention of 90.67%after 350 cycles.Additionally,the full cell with P-μSiO anode and commercial LiFePO_(4) cathode displays an ICE of 92.03%and a high reversible capacity of 144.97 mA h g^(-1).This work offers a general construction strategy of robust and ionically conductive SEI for advanced LIBs. 展开更多
关键词 Chemical prelithiation Silicon monoxide SEI Lithium-ion batteries INTERPHASE engineering
下载PDF
钛氧化物改性SiO负极在锂离子电池中的研究进展
11
作者 雷迁 王帅 +2 位作者 吴沁宇 马扬洲 宋广生 《精细化工》 EI CAS CSCD 北大核心 2024年第6期1170-1183,共14页
SiO负极虽具有高比容量、合理的工作电压,但仍面临首次库仑效率低、体积膨胀大(~160%)及导电性差等硅基负极材料共性问题,使其在锂离子电池(LIBs)中的大规模商业化应用严重受阻。而在众多金属氧化物中,钛氧化物负极因在充放电过程中体... SiO负极虽具有高比容量、合理的工作电压,但仍面临首次库仑效率低、体积膨胀大(~160%)及导电性差等硅基负极材料共性问题,使其在锂离子电池(LIBs)中的大规模商业化应用严重受阻。而在众多金属氧化物中,钛氧化物负极因在充放电过程中体积变化小(<4%),锂化后兼具优异的锂存储能力和热稳定性等优势,近些年被多次报道用于改善SiO的电化学综合性能。首先,从SiO的微观结构与锂化机制出发,简要概括了SiO与众多金属氧化物复合改性案例;然后,重点综述了钛氧化物改性SiO负极的研究工作,着重从TiO_(2)与TiO_(2–x)改性SiO负极两方面进行归纳与分析;最后,总结了钛氧化物提高SiO电化学性能的机理及改性工艺与电化学性能之间的构效关系,并对实现满足高能量密度SiO基负极商业化的目标进行展望:充分利用有关软件算法模拟具有最低化学复杂性体系,有利于深入分析反应过程与电化学机理;加强新型低成本钛氧化物(如Ti_(2)O_(3))用于改性SiO负极,有利于推动SiO基负极学术探究与商业应用。 展开更多
关键词 锂离子电池 sio负极 金属氧化物 钛氧化物 TiO_(2) TiO_(2–x)
下载PDF
Hybrid modeling for carbon monoxide gas-phase catalytic coupling to synthesize dimethyl oxalate process
12
作者 Shida Gao Cuimei Bo +3 位作者 Chao Jiang Quanling Zhang Genke Yang Jian Chu 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2024年第6期234-250,共17页
Ethylene glycol(EG)plays a pivotal role as a primary raw material in the polyester industry,and the syngas-to-EG route has become a significant technical route in production.The carbon monoxide(CO)gas-phase catalytic ... Ethylene glycol(EG)plays a pivotal role as a primary raw material in the polyester industry,and the syngas-to-EG route has become a significant technical route in production.The carbon monoxide(CO)gas-phase catalytic coupling to synthesize dimethyl oxalate(DMO)is a crucial process in the syngas-to-EG route,whereby the composition of the reactor outlet exerts influence on the ultimate quality of the EG product and the energy consumption during the subsequent separation process.However,measuring product quality in real time or establishing accurate dynamic mechanism models is challenging.To effectively model the DMO synthesis process,this study proposes a hybrid modeling strategy that integrates process mechanisms and data-driven approaches.The CO gas-phase catalytic coupling mechanism model is developed based on intrinsic kinetics and material balance,while a long short-term memory(LSTM)neural network is employed to predict the macroscopic reaction rate by leveraging temporal relationships derived from archived measurements.The proposed model is trained semi-supervised to accommodate limited-label data scenarios,leveraging historical data.By integrating these predictions with the mechanism model,the hybrid modeling approach provides reliable and interpretable forecasts of mass fractions.Empirical investigations unequivocally validate the superiority of the proposed hybrid modeling approach over conventional data-driven models(DDMs)and other hybrid modeling techniques. 展开更多
关键词 Carbon monoxide Dynamic modeling Hybrid model Reaction kinetics Semi-supervised learning
下载PDF
Carbon Monoxide Modulates Auxin Transport and Nitric Oxide Signaling in Plants under Iron Deficiency Stress
13
作者 Kaiyue Hong Yasmina Radani +2 位作者 Waqas Ahmad Ping Li Yuming Luo 《Phyton-International Journal of Experimental Botany》 SCIE 2024年第1期45-61,共17页
Carbon monoxide(CO)and nitric oxide(NO)are signal molecules that enhance plant adaptation to environmental stimuli.Auxin is an essential phytohormone for plant growth and development.CO and NO play crucial roles in mo... Carbon monoxide(CO)and nitric oxide(NO)are signal molecules that enhance plant adaptation to environmental stimuli.Auxin is an essential phytohormone for plant growth and development.CO and NO play crucial roles in modulating the plant’s response to iron deficiency.Iron deficiency leads to an increase in the activity of heme oxygenase(HO)and the subsequent generation of CO.Additionally,it alters the polar subcellular distribution of Pin-Formed 1(PIN1)proteins,resulting in enhanced auxin transport.This alteration,in turn,leads to an increase in NO accumulation.Furthermore,iron deficiency enhances the activity of ferric chelate reductase(FCR),as well as the expression of the Fer-like iron deficiency-induced transcription factor 1(FIT)and the ferric reduction oxidase 2(FRO2)genes in plant roots.Overexpression of the long hypocotyl 1(HY1)gene,which encodes heme oxygenase,or the CO donor treatment resulted in enhanced basipetal auxin transport,higher FCR activity,and the expression of FIT and FRO2 genes under Fe deficiency.Here,a potential mechanism is proposed:CO and NO interact with auxin to address iron deficiency stress.CO alters auxin transport,enhancing its accumulation in roots and up-regulating key iron-related genes like FRO2 and IRT1.Elevated auxin levels affect NO signaling,leading to greater sensitivity in root development.This interplay promotes FCR activity,which is crucial for iron absorption.Together,these molecules enhance iron uptake and root growth,revealing a novel aspect of plant physiology in adapting to environmental stress. 展开更多
关键词 Carbon monoxide nitric oxide AUXIN iron deficiency signal molecule PLANTS
下载PDF
PHC管桩桩头混凝土掺纳米SiO_(2)及钢纤维的抗锤击性研究
14
作者 王玉安 王成启 张兆民 《港工技术与管理》 2024年第1期7-13,60,共8页
为提高PHC管桩抗锤击性能,对掺纳米SiO_(2)钢纤维的混凝土进行研究,比选出质量及性价比最优的方法。分析表明,在本次研究范围内,掺加纳米SiO_(2)时,随着掺量的增加,抗锤击性呈现先增后减的趋势;掺加钢纤维时,随着掺量的增加,抗锤击性各... 为提高PHC管桩抗锤击性能,对掺纳米SiO_(2)钢纤维的混凝土进行研究,比选出质量及性价比最优的方法。分析表明,在本次研究范围内,掺加纳米SiO_(2)时,随着掺量的增加,抗锤击性呈现先增后减的趋势;掺加钢纤维时,随着掺量的增加,抗锤击性各项指标均显著提升。综合比较得出,掺钢纤维对锤击性能提升效果较为显著。 展开更多
关键词 PHC管桩 抗锤击性能 纳米sio2 钢纤维
下载PDF
Quantitative lithium substitution of carboxyl hydrogens in polyacrylic acid binder enables robust SiO electrodes with durable lithium storage stability
15
作者 Weihua Wang Wenyi Li +7 位作者 Siyi Jing Huiping Yang Huiqun Wang Ling Huang Yuxiang Mao Xikun Pang Yudai Huang Li Zhang 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第10期352-360,I0007,共10页
The design of advanced binders plays a critical role in stabilizing the cycling performance of large-volume-effect silicon monoxide(SiO)anodes.For the classic polyacrylic acid(PAA)binder,the self-association of-COOH g... The design of advanced binders plays a critical role in stabilizing the cycling performance of large-volume-effect silicon monoxide(SiO)anodes.For the classic polyacrylic acid(PAA)binder,the self-association of-COOH groups in PAA leads to the formation of intramolecular and intermolecular hydrogen bonds,greatly weakening the bonding force of the binder to SiO surface.However,strengthening the binder-material interaction from the perspective of binder molecular regulation poses a significant challenge.Herein,a modified PAA-Li_(x)(0.25≤x≤1)binder with prominent mechanical properties and adhesion strength is specifically synthesized for SiO anodes by quantitatively substituting the carboxylic hydrogen with lithium.The appropriate lithium substitution(x=0.25)not only effectively increases the number of hydrogen bonds between the PAA binder and SiO surface owing to charge repulsion effect between ions,but also guarantees moderate entanglement between PAA-Li_x molecular chains through the ion-dipole interaction.As such,the PAA-Li_(0.25)/SiO electrode exhibits exceptional mechanical properties and the lowest volume change,as well as the optimum cycling(1237.3 mA h g^(-1)after 100cycles at 0.1 C)and rate performance(1000.6 mA h g^(-1)at 1 C),significantly outperforming the electrode using pristine PAA binder.This work paves the way for quantitative regulation of binders at the molecular level. 展开更多
关键词 Polyacrylic acid binder sio anode Quantitative lithium substitution Charge repulsion effect Adhesion strength
下载PDF
不同改性剂对SiO_(2)气凝胶性能的影响
16
作者 温立玉 张忠伦 +2 位作者 侯建业 王明铭 刘振森 《化工新型材料》 CAS CSCD 北大核心 2024年第S01期358-362,370,共6页
以正硅酸乙酯(TEOS-28)为硅源,以5种不同的改性剂(甲基三乙氧基硅烷MTES、二甲基二乙氧基硅烷DMDES、三甲基乙氧基硅烷ETMS、三甲基氯硅烷TMCS、六甲基二硅氮烷HMDZ),使用溶胶-凝胶法,通过超临界干燥工艺制备疏水SiO_(2)气凝胶。通过比... 以正硅酸乙酯(TEOS-28)为硅源,以5种不同的改性剂(甲基三乙氧基硅烷MTES、二甲基二乙氧基硅烷DMDES、三甲基乙氧基硅烷ETMS、三甲基氯硅烷TMCS、六甲基二硅氮烷HMDZ),使用溶胶-凝胶法,通过超临界干燥工艺制备疏水SiO_(2)气凝胶。通过比表面积分析仪、扫描电镜、热重分析仪等多种表征方法,全面揭示了SiO_(2)气凝胶的孔结构、微观形貌和热稳定性等性能。结果表明:改性后的SiO_(2)气凝胶比表面积900~1024m^(2)/g,密度0.092~0.128g/cm^(3),平均孔直径14.67~18.3nm,均显著优于未改性;SEM结果显示孔结构更加均匀,孔隙率更大;疏水性TMCS>HMDZ>ETMS>DMDES>MTES;改性后的SiO_(2)气凝胶的热稳定性更好,其中TMCS和HMDZ改性的热稳定性最好。 展开更多
关键词 sio 2气凝胶 溶胶-凝胶 疏水性 超临界干燥
下载PDF
非离子-阴离子Bola型表面活性剂和纳米SiO2颗粒协同稳定的双重响应型O/W乳状液
17
作者 刘佩 潘婷 +4 位作者 裴晓梅 宋冰蕾 蒋建中 崔正刚 Bernard P.Binks 《日用化学工业(中英文)》 北大核心 2024年第1期1-15,共15页
合成了一种非离子-阴离子Bola型智能表面活性剂,通过pH-响应可以在非离子型CH_(3)O(EO)_(5)-R_(11)-COOH(pHpKa)之间转换。单独使用时,非离子型和Bola型分别表现为不良乳化剂和优良乳化剂。与纳米SiO_(2)颗粒复配使用时,非离子型能与SiO... 合成了一种非离子-阴离子Bola型智能表面活性剂,通过pH-响应可以在非离子型CH_(3)O(EO)_(5)-R_(11)-COOH(pHpKa)之间转换。单独使用时,非离子型和Bola型分别表现为不良乳化剂和优良乳化剂。与纳米SiO_(2)颗粒复配使用时,非离子型能与SiO_(2)颗粒协同稳定O/W(正癸烷)型Pickering乳状液,其中表面活性剂通过氢键作用吸附到颗粒表面产生原位疏水化作用,提高了颗粒的表面活性,并且这种Pickering乳状液具有pH-和温度-双重响应性,能够通过改变pH或者温度使乳状液在稳定和破乳之间实现多次转换。另一方面,Bola型CH_(3)O(EO)5-R_(11)-COONa能够与纳米SiO_(2)颗粒协同稳定分散液包油(oil-in-dispersion)乳状液,该乳状液具有良好的耐温性,但对调节pH时产生的盐较为敏感。然而与破乳后能完全返回水相便于回收再利用的同系物CH_(3)O(EO)7-R_(11)-COOH相比,具有较短EO链的CH_(3)O(EO)_(5)-R_(11)-COOH无论处于非离子型还是Bola型状态仍具有相当的油溶性,破乳后不能完全返回水相,表明EO数大小对这类新型智能表面活性剂的性能有显著的影响。 展开更多
关键词 非离子-阴离子Bola型表面活性剂 纳米sio2颗粒 Pickering乳状液 pH-响应 温度-响应
下载PDF
硼酸三乙酯添加剂改善LiNi_(0.6)Co_(0.1)Mn_(0.3)(NCM613)|石墨@SiO电池宽温域性能
18
作者 王文炼 范超君 张航 《广州化工》 CAS 2024年第21期47-50,共4页
硅基材料可用于制备高比容量锂离子电池负极,但其在高电压和高温环境下易发生副反应,而通过在电解液中加入功能添加剂,则可有效缓解上述问题。本文通过在电解液中引入硼酸三乙酯(TEB),结果表明可有效改善4.4 V LiNi_(0.6)Co_(0.1)Mn_(0.... 硅基材料可用于制备高比容量锂离子电池负极,但其在高电压和高温环境下易发生副反应,而通过在电解液中加入功能添加剂,则可有效缓解上述问题。本文通过在电解液中引入硼酸三乙酯(TEB),结果表明可有效改善4.4 V LiNi_(0.6)Co_(0.1)Mn_(0.3)|石墨@SiO软包电池的问题。与无添加剂电解液电池相比,TEB有效抑制了高温存储产气(产气量减少67.1%)和提高循环性能(25℃,从62.33%提升至90.78%)电池的低温放电容量保持率也提升了2.4%(0.5 C)和8.5%(1 C)。由于TEB加入后,可显著提升高电压LiNi_(0.6)Co_(0.1)Mn_(0.3)|石墨@SiO软包电池的宽温域工作能力,表明它是一种具有使用价值的电解液功能添加剂。 展开更多
关键词 硼酸三乙酯 锂离子电池 高电压 LiNi_(0.6)Co_(0.1)Mn_(0.3) 石墨@sio
下载PDF
On the Variability and Correlation of Surface Ozone and Carbon Monoxide Observed in Hong Kong Using Trajectory and Regression Analyses 被引量:5
19
作者 王体健 K.S.LAM +1 位作者 C.W.TSANG S.C.KOT 《Advances in Atmospheric Sciences》 SCIE CAS CSCD 2004年第1期141-152,共12页
This paper investigates, the variability and correlation of surface ozone (Os) and carbon monoxide (CO) observed at Cape D'Aguilar in Hong Kong from 1 January 1994 to 31 December 1995. Statistical analysis shows t... This paper investigates, the variability and correlation of surface ozone (Os) and carbon monoxide (CO) observed at Cape D'Aguilar in Hong Kong from 1 January 1994 to 31 December 1995. Statistical analysis shows that the average O3 and CO mixing ratios during the two years are 32±17ppbv and 305±191 ppbv, respectively. The O3/CO ratio ranges from 0.05 to 0.6 ppbv/ppbv with its frequency peaking at 0.15. The raw dataset is divided into six groups using backward trajectory and cluster analyses. For data assigned to the same trajectory type, three groups are further sorted out based on CO and NOX mixing ratios. The correlation coefficients and slopes of O3/CO for the 18 groups are calculated using linear regression analysis. Finally, five kinds of air masses with different chemical features are identified: continental background (CB), marine background (MB), regional polluted continental (RPC), perturbed marine (P*M), and local polluted (LP) air masses. Further studies indicate that O3 and CO in the continental and marine background air masses (CB and MB) are positively correlated for the reason that they are well mixed over the long range transport before arriving at the site. The negative correlation between O3 and CO in air mass LP is believed to be associated with heavy anthropogenic influence, which results from the enhancement by local sources as indicated by high CO and NOx and depletion of O3 when mixed with fresh emissions. The positive correlation in the perturbed marine air mass P*M favors the low photochemical production of O3. The negative correlation found in the regional polluted continental air mass RPC is different from the observations at Oki Island in Japan due to the more complex O3 chemistry at Cape D'Aguilar. 展开更多
关键词 OZONE carbon monoxide TRAJECTORY
下载PDF
锂离子电池SiO/TiH_(2)复合负极材料的制备及其电化学性能 被引量:1
20
作者 车智玮 段晓波 +3 位作者 朱明 昝丽娜 赵致远 陶豪 《微纳电子技术》 CAS 北大核心 2023年第6期859-867,共9页
SiO材料具有较高的理论比容量、较低的电压平台以及比Si低的体积膨胀率,被认为是最具有商业化潜力的负极材料,但是SiO存在因初始库伦效率低、体积膨胀率高引起的循环快速衰减等问题。将SiO负极材料与钛氢化合物复合,采用简单、易于工业... SiO材料具有较高的理论比容量、较低的电压平台以及比Si低的体积膨胀率,被认为是最具有商业化潜力的负极材料,但是SiO存在因初始库伦效率低、体积膨胀率高引起的循环快速衰减等问题。将SiO负极材料与钛氢化合物复合,采用简单、易于工业化的球磨和热处理方法制备了SiO/TiH_(2)负极材料,探讨了热处理温度与SiO和TiH_(2)的质量比对SiO/TiH_(2)复合负极材料的影响。结果表明,热处理过程中形成的高导电性中间相可以起到增强导电性、缓冲体积膨胀、显著改善复合负极材料循环和倍率性能的作用。其中热处理温度为700℃、质量比为4∶1的SiO/TiH_(2)复合负极材料的初始库伦效率为74.4%,100次循环后比容量为555.2 mA·h/g,比容量保持率为53.6%。 展开更多
关键词 复合材料 锂离子电池 球磨和热处理 sio TiH_(2)
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部