When the filler-bitumen ratio of asphalt mortar changes, its adhesion and viscoelasticity will also change, as well as its performance at the high and low temperatures, fatigue durability, and ductility. Thus, the app...When the filler-bitumen ratio of asphalt mortar changes, its adhesion and viscoelasticity will also change, as well as its performance at the high and low temperatures, fatigue durability, and ductility. Thus, the appropriate fillerbitumen ratio directly affects the asphalt mortar＇s performance. This paper tested the physical indexes of the No. 70 matrix asphalt mortar modified by additive Sasobit （SB） and Sasowam （SW） through dynamic shear rheometer and bending beam rheometer under different temperature conditions, and comprehensively analyzed the high-temperature anti-rutting and fatigue performance, low-temperature crack resistance performance, and ductility of asphalt mortar. The results show that ore powder not only can increase the antirutting factor but also can increase the aging resistance of asphalt. SB has better performances than SW at high temperatures. As for the filler-bitumen ratio of asphalt mortar with additive SB, the recommended value is between 0.8 and 1.2, and the value may be a little larger for that with SW.展开更多
In this paper we investigate the reinforcement mechanism of high viscosity rubber/SBS modified asphalt mortar mixed with fiber （mineral, lignin or carbon fiber） and deoiled asphalt （DOA）. The softening point, pene...In this paper we investigate the reinforcement mechanism of high viscosity rubber/SBS modified asphalt mortar mixed with fiber （mineral, lignin or carbon fiber） and deoiled asphalt （DOA）. The softening point, penetration and viscosity tests were conducted to characterize the engineering properties of asphalt-fiber mortar. The microstructure of fiber was observed using scanning electron microscopy （SEM）, and the results indicated that fiber can effectively improve the toughness of asphalt matrix through forming a spatial network structure, and then adhesion and stabilization of asphalt binder. The cone penetration test was designed to study the rheological property of fiber modified asphalt. The results indicated that the reinforcement effect increased with fibers and DOA fraction increasing to a certain threshold, and the optimal fiber content was dependent on the fiber type and its length. Fiber content and filler-asphalt ratio had significant effects on the softening point, penetration, viscosity and cone penetration of asphalt mortar.展开更多
文摘When the filler-bitumen ratio of asphalt mortar changes, its adhesion and viscoelasticity will also change, as well as its performance at the high and low temperatures, fatigue durability, and ductility. Thus, the appropriate fillerbitumen ratio directly affects the asphalt mortar＇s performance. This paper tested the physical indexes of the No. 70 matrix asphalt mortar modified by additive Sasobit （SB） and Sasowam （SW） through dynamic shear rheometer and bending beam rheometer under different temperature conditions, and comprehensively analyzed the high-temperature anti-rutting and fatigue performance, low-temperature crack resistance performance, and ductility of asphalt mortar. The results show that ore powder not only can increase the antirutting factor but also can increase the aging resistance of asphalt. SB has better performances than SW at high temperatures. As for the filler-bitumen ratio of asphalt mortar with additive SB, the recommended value is between 0.8 and 1.2, and the value may be a little larger for that with SW.
基金supported by the National Natural Science Foundation of China (51008307)the Fundamental Research Funds for the Central Universities (09CX04039A)the Graduate Student Innovation Project of China University of Petroleum (East China) (12CX06055A)
文摘In this paper we investigate the reinforcement mechanism of high viscosity rubber/SBS modified asphalt mortar mixed with fiber （mineral, lignin or carbon fiber） and deoiled asphalt （DOA）. The softening point, penetration and viscosity tests were conducted to characterize the engineering properties of asphalt-fiber mortar. The microstructure of fiber was observed using scanning electron microscopy （SEM）, and the results indicated that fiber can effectively improve the toughness of asphalt matrix through forming a spatial network structure, and then adhesion and stabilization of asphalt binder. The cone penetration test was designed to study the rheological property of fiber modified asphalt. The results indicated that the reinforcement effect increased with fibers and DOA fraction increasing to a certain threshold, and the optimal fiber content was dependent on the fiber type and its length. Fiber content and filler-asphalt ratio had significant effects on the softening point, penetration, viscosity and cone penetration of asphalt mortar.
