Based on the assumption of the plain-strain problem, various optimization or random search methods have been developed for locating the critical slip surfaces in slope-stability analysis, but none of such methods is a...Based on the assumption of the plain-strain problem, various optimization or random search methods have been developed for locating the critical slip surfaces in slope-stability analysis, but none of such methods is applicable to the 3D case. In this paper, a simple Monte Carlo random simulation method is proposed to identify the 3D critical slip surface. Assuming the initial slip to be the lower part of a slip ellipsoid, the 3D critical slip surface is located by means of a minimized 3D safety factor. A column-based 3D slope stability analysis model is used to calculate this factor. In this study, some practical cases of known minimum safety factors and critical slip surfaces in 2D analysis are extended to 3D slope problems to locate the critical slip surfaces. Compared with the 2D result, the resulting 3D critical slip surface has no apparent difference in terms of only cross section, but the associated 3D safety factor is definitely higher.展开更多
In this paper, a generalized limit equilibrium method of solving the active earth pressure problem behind a retaining wall is proposed.Differing from other limit equilibrium methods, an arbitrary slip surface shape wi...In this paper, a generalized limit equilibrium method of solving the active earth pressure problem behind a retaining wall is proposed.Differing from other limit equilibrium methods, an arbitrary slip surface shape without any assumptions of pre-defined shapes is needed in the current framework, which is verified to find the most probable failure slip surface. Based on the current computational framework, numerical comparisons with experiment, discrete element method and other methods are carried out. In addition, the influences of the inclination of the wall, the soil cohesion, the angle of the internal friction of the soil, the slope inclination of the backfill soil on the critical pressure coefficient of the soil, the point of application of the resultant earth pressure and the shape of the slip surface are also carefully investigated. The results demonstrate that limit equilibrium solution from predefined slip plane assumption, including Coulomb solution, is a special case of current computational framework. It is well illustrated that the current method is feasible to evaluate the characteristics of earth pressure problem.展开更多
Long time monitoring is acquired to obtain the displacement data for displacement-based geotechnical material back analysis, and these data are hard to be measured under some special condition, such as earthquake. For...Long time monitoring is acquired to obtain the displacement data for displacement-based geotechnical material back analysis, and these data are hard to be measured under some special condition, such as earthquake. For a simple homogeneous slope, the position of a critical failure surface is determined by value of c/tan ~b. Utilizing upper bound theorem of limit analysis, the external work rate and internal energy for normal slope under earthquake forces are given, and the formula for minimum safety factor is derived. On this basis, the equation of slip surface and the surface depth of a given position are solved. In this way, the strength parameter can be analyzed by known slip surface depth. For practical use, the surface depth for a given slope under varying strength parameter is presented. Finally, two examples are given to show its simplicity and effectiveness.展开更多
The critical slip surface of a fractured rock slope tends to extend along the fractures.Thus,fracture orientation plays a critical role in determining the critical slip surface.Based on fracture orientation data,this ...The critical slip surface of a fractured rock slope tends to extend along the fractures.Thus,fracture orientation plays a critical role in determining the critical slip surface.Based on fracture orientation data,this paper examines the critical slip surfaces of fractured rock slopes.Given that the surface of a fractured rock slope extends along the fracture surfaces,or the wedges,with each composed of two arbitrary fractures,the critical slip surface is determined via stochastic dynamics.In addition,a fracture frequency method is proposed as a means of analyzing the critical slip surface.According to this method,the critical slip surface slips in whichever direction has the lowest fracture frequency.Based on the stochastic dynamics method and the fracture frequency method,the critical slip surface of the slope is finally determined,that is,the critical slip surface takes the form of a plane passing the slope toe with a dip of 120° and a dip angle of 45°.展开更多
Actual slope stability problems have three-dimensional(3D) characteristics and the soils of slopes have curved failure envelopes. This incorporates a power-law nonlinear failure criterion into the kinematic approach o...Actual slope stability problems have three-dimensional(3D) characteristics and the soils of slopes have curved failure envelopes. This incorporates a power-law nonlinear failure criterion into the kinematic approach of limit analysis to conduct the evaluation of the stability of 3D slopes. A tangential technique is adopted to simplify the nonlinear failure criterion in the form of equivalent Mohr-Coulomb strength parameters. A class of 3D admissible rotational failure mechanisms is selected for soil slopes including three types of failure mechanisms: face failure, base failure, and toe failure. The upper-bound solutions and corresponding critical slip surfaces can be obtained by an efficient optimization method. The results indicate that the nonlinear parameters have significant influences on the assessment of slope stability, especially on the type of failure mechanism. The effects of nonlinear parameters appear to be pronounced for gentle slopes constrained to a narrow width. Compared with the solutions derived from plane-strain analysis, the 3D solutions are more sensitive to the values of nonlinear parameters.展开更多
The tension cracks and joints in rock or soil slopes affect their failure stability.Prediction of rock or soil slope failure is one of the most challenging tasks in the earth sciences.The actual slopes consist of inho...The tension cracks and joints in rock or soil slopes affect their failure stability.Prediction of rock or soil slope failure is one of the most challenging tasks in the earth sciences.The actual slopes consist of inhomogeneous materials,complex morphology,and erratic joints.Most studies concerning the failure of rock slopes primarily focused on determining Factor of Safety(FoS)and Critical Slip Surface(CSS).In this article,the effect of inclined tension crack on a rock slope failure is studied numerically with Shear Strength Reduction Factor(SRF)method.An inclined Tension Crack(TC)influences the magnitude and location of the rock slope’s Critical Shear Strength Reduction Factor(CSRF).Certainly,inclined cracks are more prone to cause the failure of the slope than the vertical TC.Yet,all tension cracks do not lead to failure of the slope mass.The effect of the crest distance of the tension crack is also investigated.The numerical results do not show any significant change in the magnitude of CSRF unless the tip of the TC is very near to the crest of the slope.ATC is also replaced with a joint,and the results differ from the corresponding TC.These results are discussed regarding shear stress and Critical Slip Surface(CSS).展开更多
文摘Based on the assumption of the plain-strain problem, various optimization or random search methods have been developed for locating the critical slip surfaces in slope-stability analysis, but none of such methods is applicable to the 3D case. In this paper, a simple Monte Carlo random simulation method is proposed to identify the 3D critical slip surface. Assuming the initial slip to be the lower part of a slip ellipsoid, the 3D critical slip surface is located by means of a minimized 3D safety factor. A column-based 3D slope stability analysis model is used to calculate this factor. In this study, some practical cases of known minimum safety factors and critical slip surfaces in 2D analysis are extended to 3D slope problems to locate the critical slip surfaces. Compared with the 2D result, the resulting 3D critical slip surface has no apparent difference in terms of only cross section, but the associated 3D safety factor is definitely higher.
基金Financial support from the Key Research Program of Chinese Academy of Sciences (Grant No. KZZD-EW-05-01)the NSFC (Grant Nos. 41101008, 41272346)the Youth Talent Team Program of the Institute of Mountain Hazards and Environment, Chinese Academy of Sciences, Opening Fund of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection (Chengdu University of Technology) (Grant No. SKLGP2011K010)
文摘In this paper, a generalized limit equilibrium method of solving the active earth pressure problem behind a retaining wall is proposed.Differing from other limit equilibrium methods, an arbitrary slip surface shape without any assumptions of pre-defined shapes is needed in the current framework, which is verified to find the most probable failure slip surface. Based on the current computational framework, numerical comparisons with experiment, discrete element method and other methods are carried out. In addition, the influences of the inclination of the wall, the soil cohesion, the angle of the internal friction of the soil, the slope inclination of the backfill soil on the critical pressure coefficient of the soil, the point of application of the resultant earth pressure and the shape of the slip surface are also carefully investigated. The results demonstrate that limit equilibrium solution from predefined slip plane assumption, including Coulomb solution, is a special case of current computational framework. It is well illustrated that the current method is feasible to evaluate the characteristics of earth pressure problem.
基金Project(2013CB036004) supported by the National Basic Research Program of ChinaProject(51178468) supported by the National Natural Science Foundation of ChinaProject(2013zzts047) supported by the Fundamental Research Funds for Central Universities,China
文摘Long time monitoring is acquired to obtain the displacement data for displacement-based geotechnical material back analysis, and these data are hard to be measured under some special condition, such as earthquake. For a simple homogeneous slope, the position of a critical failure surface is determined by value of c/tan ~b. Utilizing upper bound theorem of limit analysis, the external work rate and internal energy for normal slope under earthquake forces are given, and the formula for minimum safety factor is derived. On this basis, the equation of slip surface and the surface depth of a given position are solved. In this way, the strength parameter can be analyzed by known slip surface depth. For practical use, the surface depth for a given slope under varying strength parameter is presented. Finally, two examples are given to show its simplicity and effectiveness.
基金supported by the National Natural Science Foundation of China(Grant Nos.40872170,40902077,41072196)Doctoral Program Foundation of Higher Education of China(Grant No.20090061110054)+2 种基金Jilin University's 985 Project(Grant No.450070021107)Graduate Innovation Fund of Jilin University(Grant No.20121073)Basic Research of Jilin University(Grant No.421032184424)
文摘The critical slip surface of a fractured rock slope tends to extend along the fractures.Thus,fracture orientation plays a critical role in determining the critical slip surface.Based on fracture orientation data,this paper examines the critical slip surfaces of fractured rock slopes.Given that the surface of a fractured rock slope extends along the fracture surfaces,or the wedges,with each composed of two arbitrary fractures,the critical slip surface is determined via stochastic dynamics.In addition,a fracture frequency method is proposed as a means of analyzing the critical slip surface.According to this method,the critical slip surface slips in whichever direction has the lowest fracture frequency.Based on the stochastic dynamics method and the fracture frequency method,the critical slip surface of the slope is finally determined,that is,the critical slip surface takes the form of a plane passing the slope toe with a dip of 120° and a dip angle of 45°.
基金Project(201501035-03)supported by the Public Service Sector R&D Project of Ministry of Water Resource of ChinaProject(2015CB057901)supported by Basic Research Program of China+4 种基金Projects(51278382,51479050,51508160)supported by the National Natural Science Foundation of ChinaProject(B13024)supported by the 111 ProjectProjects(2014B06814,B15020060,2014B33414)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(YK913004)supported by the Open Foundation of Key Laboratory of Failure Mechanism and Safety Control Techniques of Earth-rock Dam of the Ministry of Water Resources,ChinaProject(KYZZ_0143)supported by the Graduate Education Innovation Project of Jiangsu Province of China
文摘Actual slope stability problems have three-dimensional(3D) characteristics and the soils of slopes have curved failure envelopes. This incorporates a power-law nonlinear failure criterion into the kinematic approach of limit analysis to conduct the evaluation of the stability of 3D slopes. A tangential technique is adopted to simplify the nonlinear failure criterion in the form of equivalent Mohr-Coulomb strength parameters. A class of 3D admissible rotational failure mechanisms is selected for soil slopes including three types of failure mechanisms: face failure, base failure, and toe failure. The upper-bound solutions and corresponding critical slip surfaces can be obtained by an efficient optimization method. The results indicate that the nonlinear parameters have significant influences on the assessment of slope stability, especially on the type of failure mechanism. The effects of nonlinear parameters appear to be pronounced for gentle slopes constrained to a narrow width. Compared with the solutions derived from plane-strain analysis, the 3D solutions are more sensitive to the values of nonlinear parameters.
文摘The tension cracks and joints in rock or soil slopes affect their failure stability.Prediction of rock or soil slope failure is one of the most challenging tasks in the earth sciences.The actual slopes consist of inhomogeneous materials,complex morphology,and erratic joints.Most studies concerning the failure of rock slopes primarily focused on determining Factor of Safety(FoS)and Critical Slip Surface(CSS).In this article,the effect of inclined tension crack on a rock slope failure is studied numerically with Shear Strength Reduction Factor(SRF)method.An inclined Tension Crack(TC)influences the magnitude and location of the rock slope’s Critical Shear Strength Reduction Factor(CSRF).Certainly,inclined cracks are more prone to cause the failure of the slope than the vertical TC.Yet,all tension cracks do not lead to failure of the slope mass.The effect of the crest distance of the tension crack is also investigated.The numerical results do not show any significant change in the magnitude of CSRF unless the tip of the TC is very near to the crest of the slope.ATC is also replaced with a joint,and the results differ from the corresponding TC.These results are discussed regarding shear stress and Critical Slip Surface(CSS).
