An Improved Solov2 Based on Attention Mechanism and Weighted Loss Function for Electrical Equipment Instance Segmentation

The current existing problem of deep learning framework for the detection and segmentation of electrical equipment is dominantly related to low precision.Because of the reliable,safe and easy-to-operate technology provided by deep learning-based video surveillance for unmanned inspection of electrical equipment,this paper uses the bottleneck attention module(BAM)attention mechanism to improve the Solov2 model and proposes a new electrical equipment segmentation mode.Firstly,the BAM attention mechanism is integrated into the feature extraction network to adaptively learn the correlation between feature channels,thereby improving the expression ability of the feature map;secondly,the weighted sum of CrossEntropy Loss and Dice loss is designed as the mask loss to improve the segmentation accuracy and robustness of the model;finally,the non-maximal suppression(NMS)algorithm to better handle the overlap problem in instance segmentation.Experimental results show that the proposed method achieves an average segmentation accuracy of mAP of 80.4% on three types of electrical equipment datasets,including transformers,insulators and voltage transformers,which improve the detection accuracy by more than 5.7% compared with the original Solov2 model.The segmentation model proposed can provide a focusing technical means for the intelligent management of power systems.

Structural failure analysis with CMS-based ground motion selection using innovative cost function and weight factors

The selection and scaling of ground motion records is considered a primary and essential task in performing structural analysis and design.Conventional methods involve using ground motion models and a conditional spectrum to select ground motion records based on the target spectrum.This research demonstrates the influence of adopting different weighted factors for various period ranges during matching selected ground motions with the target hazard spectrum.The event data from the Next Generation Attenuation West 2(NGA-West 2)database is used as the basis for ground motion selection,and hazard de-aggregation is conducted to estimate the event parameters of interest,which are then used to construct the target intensity measure(IM).The target IMs are then used to select ground motion records with different weighted vector-valued objective functions.The weights are altered to account for the relative importance of IM in accordance with the structural analysis application of steel moment resisting frame(SMRF)buildings.Instead of an ordinary objective function for the matching spectrum,a novel model is introduced and compared with the conventional cost function.The results indicate that when applying the new cost function for ground motion selection,it places higher demands on structures compared to the conventional cost function.Moreover,submitting more weights to the first-mode period of structures increases engineering demand parameters.Findings demonstrate that weight factors allocated to different period ranges can successfully account for period elongation and higher mode effects.

Existence of a Sigh-Changing Solution Result for Logarithmic Schrödinger Equations with Weight Function

This paper is devoted to studying the existence of solutions for the following logarithmic Schrödinger problem: −div(a(x)∇u)+V(x)u=ulogu2+k(x)| u |q1−2u+h(x)| u |q2−2u, x∈ℝN.(1)We first prove that the corresponding functional I belongs to C1(HV1(ℝN),ℝ). Furthermore, by using the variational method, we prove the existence of a sigh-changing solution to problem (1).

Unsupervised Functional Data Clustering Based on Adaptive Weights

In recent years, functional data has been widely used in finance, medicine, biology and other fields. The current clustering analysis can solve the problems in finite-dimensional space, but it is difficult to be directly used for the clustering of functional data. In this paper, we propose a new unsupervised clustering algorithm based on adaptive weights. In the absence of initialization parameter, we use entropy-type penalty terms and fuzzy partition matrix to find the optimal number of clusters. At the same time, we introduce a measure based on adaptive weights to reflect the difference in information content between different clustering metrics. Simulation experiments show that the proposed algorithm has higher purity than some algorithms.

Curve Classification Based onMean-Variance Feature Weighting and Its Application

The classification of functional data has drawn much attention in recent years.The main challenge is representing infinite-dimensional functional data by finite-dimensional features while utilizing those features to achieve better classification accuracy.In this paper,we propose a mean-variance-based(MV)feature weighting method for classifying functional data or functional curves.In the feature extraction stage,each sample curve is approximated by B-splines to transfer features to the coefficients of the spline basis.After that,a feature weighting approach based on statistical principles is introduced by comprehensively considering the between-class differences and within-class variations of the coefficients.We also introduce a scaling parameter to adjust the gap between the weights of features.The new feature weighting approach can adaptively enhance noteworthy local features while mitigating the impact of confusing features.The algorithms for feature weighted K-nearest neighbor and support vector machine classifiers are both provided.Moreover,the new approach can be well integrated into existing functional data classifiers,such as the generalized functional linear model and functional linear discriminant analysis,resulting in a more accurate classification.The performance of the mean-variance-based classifiers is evaluated by simulation studies and real data.The results show that the newfeatureweighting approach significantly improves the classification accuracy for complex functional data.

Algorithms and statistical analysis for linear structured weighted total least squares problem

Weighted total least squares(WTLS)have been regarded as the standard tool for the errors-in-variables(EIV)model in which all the elements in the observation vector and the coefficient matrix are contaminated with random errors.However,in many geodetic applications,some elements are error-free and some random observations appear repeatedly in different positions in the augmented coefficient matrix.It is called the linear structured EIV(LSEIV)model.Two kinds of methods are proposed for the LSEIV model from functional and stochastic modifications.On the one hand,the functional part of the LSEIV model is modified into the errors-in-observations(EIO)model.On the other hand,the stochastic model is modified by applying the Moore-Penrose inverse of the cofactor matrix.The algorithms are derived through the Lagrange multipliers method and linear approximation.The estimation principles and iterative formula of the parameters are proven to be consistent.The first-order approximate variance-covariance matrix(VCM)of the parameters is also derived.A numerical example is given to compare the performances of our proposed three algorithms with the STLS approach.Afterwards,the least squares(LS),total least squares(TLS)and linear structured weighted total least squares(LSWTLS)solutions are compared and the accuracy evaluation formula is proven to be feasible and effective.Finally,the LSWTLS is applied to the field of deformation analysis,which yields a better result than the traditional LS and TLS estimations.

Beneficial effects of antidepressant mirtazapine in functional dyspepsia patients with weight loss

AIM: To explore the effects and mechanism of action of antidepressant mirtazapine in functional dyspepsia(FD) patients with weight loss.METHODS: Sixty depressive FD patients with weight loss were randomly divided into a mirtazapine group(MG), a paroxetine group(PG) or a conventional therapy group(CG) for an 8-wk clinical trial. Adverse effects and treatment response were recorded. The Nepean Dyspepsia Index-symptom(NDSI) checklist and the 17-item Hamilton Rating Scale of Depression(HAMD-17) were used to evaluate dyspepsia and depressive symptoms, respectively. The body composition analyzer was used to measure body weight and fat. Serum hormone levels were measured by ELISA.RESULTS:(1) After 2 wk of treatment, NDSI scores were significantly lower for the MG than for the PG and CG;(2) After 4 or 8 wk of treatment, HAMD-17 scores were significantly lower for the MG and PG than for the CG;(3) After 8 wk of treatment, patients in the MG experienced a weight gain of 3.58 ± 1.57 kg, which was significantly higher than that observed for patients in the PG and CG. Body fat increased by 2.77 ± 0.14kg, the body fat ratio rose by 4%, and the visceral fat area increased by 7.56 ± 2.25 cm2; and(4) For the MG, serum hormone levels of ghrelin, neuropeptide Y(NPY), motilin(MTL) and gastrin(GAS) were significantly upregulated; in contrast, those of leptin, 5-hydroxytryptamine(5-HT) and cholecystokinin(CCK) were significantly downregulated. CONCLUSION: Mirtazapine not only alleviates symptoms associated with dyspepsia and depression linked to FD in patients with weight loss but also significantly increases body weight(mainly the visceral fat in body fat). The likely mechanism of mirtazapine action is regulation of brain-gut or gastrointestinal hormone levels.

Consequences of gestational and pregestational diabetes on placental function and birth weight

Maternal diabetes constitutes an unfavorable environment for embryonic and fetoplacental development. Despite current treatments, pregnant women with pregestational diabetes are at increased risk for congenital malformations, materno-fetal complications, placental abnormalities and intrauterine malprogramming. The complications during pregnancy concern the mother (gravidic hypertension and/or preeclampsia, cesarean section) and the fetus (macrosomia or intrauterine growth restriction, shoulder dystocia, hypoglycemia and respiratory distress). The fetoplacental impairment and intrauterine programming of diseases in the offspring's later life induced by gestational diabetes are similar to those induced by type 1 and type 2 diabetes mellitus. Despite the existence of several developmental and morphological differences in the placenta from rodents and women, there are similarities in the alterations induced by maternal diabetes in the placenta from diabetic patients and diabetic experimental models. From both human and rodent diabetic experimentalmodels, it has been suggested that the placenta is a compromised target that largely suffers the impact of maternal diabetes. Depending on the maternal metabolic and proin ammatory derangements, macrosomia is explained by an excessive availability of nutrients and an increase in fetal insulin release, a phenotype related to the programming of glucose intolerance. The degree of fetal damage and placental dysfunction and the availability and utilisation of fetal substrates can lead to the induction of macrosomia or intrauterine growth restriction. In maternal diabetes, both the maternal environment and the genetic background are important in the complex and multifactorial processes that induce damage to the embryo, the placenta, the fetus and the offspring. Nevertheless, further research is needed to better understand the mechanisms that govern the early embryo development, the induction of congenital anomalies and fetal overgrowth in maternal diabetes.

Updates on the relation of weight excess and reproductive function in men： sleep apnea as a new area of interest

Obesity has a negative effect on male reproductive function. It is associated with low testosterone levels and alteration in gonadotropin secretion. Male obesity has been linked to reduced male fertility. Data regarding the relation of obesity to sperm parameters are conflicting in terms of the nature and magnitude of the effect. New areas of interest are emerging that can help explain the variation in study results, such as genetic polymorphism and sleep apnea. Sleep disorders have been linked to altered testosterone production and hypogonadism in men. It was also correlated to erectile dysfunction. The relation of sleep disorders to male fertility and sperm parameters remains to be investigated. Men with hypogonadism and infertility should be screened for sleep apnea. Treatment of obesity and sleep apnea improves testosterone levels and erectile function.

Temperature and Water Vapor Weighting Functions from Radiative Transfer Equation with Surface Emissivity and Solar Reflectivity

Linearization of Radiative Transfer Equation (RTE) is the key step in physical retrieval of atmospheric temperature and moisture profiles from InfRared (IR) sounder observations. In this paper, the successive forms of temperature and water vapor mixing ratio component weighting functions are derived by applying one term variation method to RTE with surface emissivity and solar reflectivity contained. Retrivals of temperature and water vapor mixing ratio profiles from simulated Atmospheric Infrared Sounder (AIRS) observations with surface emissivity and solar reflectivity are presented.

Weighted Multi-sensor Data Level Fusion Method of Vibration Signal Based on Correlation Function

As the differences of sensor＇s precision and some random factors are difficult to control,the actual measurement signals are far from the target signals that affect the reliability and precision of rotating machinery fault diagnosis.The traditional signal processing methods,such as classical inference and weighted averaging algorithm usually lack dynamic adaptability that is easy for trends to cause the faults to be misjudged or left out.To enhance the measuring veracity and precision of vibration signal in rotary machine multi-sensor vibration signal fault diagnosis,a novel data level fusion approach is presented on the basis of correlation function analysis to fast determine the weighted value of multi-sensor vibration signals.The approach doesn＇t require knowing the prior information about sensors,and the weighted value of sensors can be confirmed depending on the correlation measure of real-time data tested in the data level fusion process.It gives greater weighted value to the greater correlation measure of sensor signals,and vice versa.The approach can effectively suppress large errors and even can still fuse data in the case of sensor failures because it takes full advantage of sensor＇s own-information to determine the weighted value.Moreover,it has good performance of anti-jamming due to the correlation measures between noise and effective signals are usually small.Through the simulation of typical signal collected from multi-sensors,the comparative analysis of dynamic adaptability and fault tolerance between the proposed approach and traditional weighted averaging approach is taken.Finally,the rotor dynamics and integrated fault simulator is taken as an example to verify the feasibility and advantages of the proposed approach,it is shown that the multi-sensor data level fusion based on correlation function weighted approach is better than the traditional weighted average approach with respect to fusion precision and dynamic adaptability.Meantime,the approach is adaptable and easy to use,can be applied to other areas of vibration measurement.

Optimum Weight Design of Functionally Graded Material Gears

Traditional gear weight optimization methods consider gear tooth number, module, face width or other dimension parameters of gear as design variables. However, due to the complicated form and geometric features peculiar to the gear, there will be large amounts of design parameters in gear design, and the influences of gear parameters changing on gear trains, transmission system and the whole equipment have to be taken into account, which increases the complexity of optimization problem. This paper puts forward to apply functionally graded materials（FGMs） to gears and then conduct the optimization. According to the force situation of gears, the material distribution form of FGM gears is determined. Then based on the performance parameters analysis of FGMs and the practical working demands for gears, a multi-objective optimization model is formed. Finally by using the goal driven optimization（GDO） method, the optimal material distribution is achieved, which makes gear weight and the maximum deformation be minimum and the maximum bending stress do not exceed the allowable stress. As an example, the applying of FGM to automotive transmission gear is conducted to illustrate the optimization design process and the result shows that under the condition of keeping the normal working performance of gear, the method achieves in greatly reducing the gear weight. This research proposes a FGM gears design method that is able to largely reduce the weight of gears by optimizing the microscopic material parameters instead of changing the macroscopic dimension parameters of gears, which reduces the complexity of gear weight optimization problem.

Construction mechanism of whitenization weight function and its application in grey clustering evaluation

The clustering evaluation can be used to scientifically classify the objects to be evaluated according to the information aggregation of various evaluation rules. In grey weighted clustering evaluation, the index clustering rule relies on the construction of the whitenization weight function, while the existing construction method of the linear function lacks the construction mechanism analysis and validity explanation. A normative construction principle is put forward by analyzing the construction mechanism of the function. Through proving the normative principle of the function,the basic modal function(BMF) is proposed and characterized by different function forms. Then, a new type of the whitenization weight function and its grey clustering evaluation model algorithm are given by studying the mechanism and nature of the construction of different forms of the function. Finally, the comparative study for self-innovation capability of defense science and technology industry(DSTI) is taken as an example. The results show that the different construction ways of the function have an effect on the clustering result. The proposed construction mechanism can better explain the index clustering rules and evaluation effectiveness,which will perfect the theoretical system of grey clustering evaluation and be applied to practice effectively.

ESSENTIAL NORMS OF PRODUCTS OF WEIGHTED COMPOSITION OPERATORS AND DIFFERENTIATION OPERATORS BETWEEN BANACH SPACES OF ANALYTIC FUNCTIONS

We obtain several estimates of the essential norms of the products of differen- tiation operators and weighted composition operators between weighted Banach spaces of analytic functions with general weights. As applications, we also give estimates of the es- sential norms of weighted composition operators between weighted Banach space of analytic functions and Bloch-type spaces.

Functions of Uni- and Multi-citations： Implications for Weighted Citation Analysis

Purpose： （1） To test basic assumptions underlying frequency-weighted citation analysis： （a） Uni-citations correspond to citations that are nonessential to the citing papers; （b） The influence of a cited paper on the citing paper increases with the frequency with which it is cited in the citing paper. （2） To explore the degree to which citation location may be used to help identify nonessential citations. Design/methodology/approach： Each of the in-text citations in all research articles published in Issue 1 of the Journal of the Association for Information Science and Technology （JASIST） 2016 was manually classified into one of these five categories： Applied, Contrastive, Supportive, Reviewed, and Perfunctory. The distributions of citations at different in-text frequencies and in different locations in the text by these functions were analyzed. Findings： Filtering out nonessential citations before assigning weight is important for frequency-weighted citation analysis. For this purpose, removing citations by location is more effective than re-citation analysis that simply removes uni-citations. Removing all citation occurrences in the Background and Literature Review sections and uni-citations in the Introduction section appears to provide a good balance between filtration and error rates. Research limitations： This case study suffers from the limitation of scalability and generalizability. We took careful measures to reduce the impact of other limitations of the data collection approach used. Relying on the researcher＇s judgment to attribute citation functions, this approach is unobtrusive but speculative, and can suffer from a low degree of confidence, thus creating reliability concerns. Practical implications： Weighted citation analysis promises to improve citation analysis for research evaluation, knowledge network analysis, knowledge representation, and information retrieval. The present study showed the importance of filtering out nonessential citations before assigning weight in a weighted citation analysis, which may be a significant step forward to realizing these promises. Originality/value： Weighted citation analysis has long been proposed as a theoretical solution to the problem of citation analysis that treats all citations equally, and has attracted increasing research interest in recent years. The present study showed, for the first time, the importance of filtering out nonessential citations in weighted citation analysis, pointing research in this area in a new direction.

Commutators of Weighted Lipschitz Functions and Multilinear Singular Integrals with Non-Smooth Kernels

This paper is devoted to studying the commutators of the multilinear singular integral operators with the non-smooth kernels and the weighted Lipschitz functions. Some mapping properties for two types of commutators on the weighted Lebesgue spaces, which extend and generalize some previous results, are obtained.

Weighted approximation of functions with singularities by Bernstein operators

As an important type of polynomial approximation, approximation of functions by Bernstein operators is an important topic in approximation theory and computational theory. This paper gives global and pointwise estimates for weighted approximation of functions with singularities by Bernstein operators. The main results are the Jackson＇s estimates of functions f∈ （Wwλ）2 andre Cw, which extends the result of （Della Vecchia et al., 2004）.

A STUDY ON THE WEIGHT FUNCTION OF THE MOVING LEAST SQUARE APPROXIMATION IN THE LOCAL BOUNDARY INTEGRAL EQUATION METHOD

The meshless method is a new numerical technique presented in recent years.It uses the moving least square(MLS)approximation as a shape function.The smoothness of the MLS approximation is determined by that of the basic function and of the weight function,and is mainly determined by that of the weight function.Therefore,the weight function greatly affects the accuracy of results obtained.Different kinds of weight functions,such as the spline function, the Gauss function and so on,are proposed recently by many researchers.In the present work,the features of various weight functions are illustrated through solving elasto-static problems using the local boundary integral equation method.The effect of various weight functions on the accuracy, convergence and stability of results obtained is also discussed.Examples show that the weight function proposed by Zhou Weiyuan and Gauss and the quartic spline weight function are better than the others if parameters c and α in Gauss and exponential weight functions are in the range of reasonable values,respectively,and the higher the smoothness of the weight function,the better the features of the solutions.

CLOSED-FORM WEIGHT FUNCTION FOR EDGE CRACK PROBLEMS

An accurate crack surface opening displacement formula for edge cracks in finite bodies has been derived,and was subsequently used to develop wide-range closed-form weight functions for edge cracks. The analytical weight function is general and can be easily used to determine accurate stress intensity factors and crack surface opening displacements for arbitrarily loaded edge cracks with high efficiency.Examples have been given for problems of edge crack(s)with a number of typical load conditions for illustration.

BUECKNER'S WORK CONJUGATE INTEGRALS AND WEIGHT FUNCTIONS FOR A CRACK IN ANISOTROPIC SOLIDS

The Bueckner work conjugate integrals are studied for cracks in anisotropic clastic solids.The difficulties in separating Lekhnitskii's two complex arguments involved in the integrals are overcome and explicit functional representa- tions of the integrals are given for several typical cases.It is found that the pseudo- orthogonal property of the eigenfunction expansion forms presented previously for isotropic cases,isotropic bimaterials,and orthotropic cases,are proved to be also valid in the present case of anisotropic material.Finally,Some useful path-independent in- tegrals and weight functions are proposed.