期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Exploration on 2D DOA Estimation of Linear Array Motion:Uniform Linear Motion
1
作者 Jianhong Chu Zhi Zhang Yu Guo 《China Communications》 SCIE CSCD 2023年第11期78-95,共18页
Generally,due to the limitation of the dimension of the array aperture,linear arrays cannot achieve two-dimensional(2D)direction of arrival(DOA)estimation.But the emergence of array motion provides a chance for that.I... Generally,due to the limitation of the dimension of the array aperture,linear arrays cannot achieve two-dimensional(2D)direction of arrival(DOA)estimation.But the emergence of array motion provides a chance for that.In this paper,a generalized motion scheme and a novel method of 2D DOA estimation are proposed by exploring the linear array motion.To be specific,the linear arrays are controlled to move along an arbitrary direction at a constant velocity and snap per fixed time delay.All the received signals are processed to synthesize the comprehensive observation vector for an extended 2D virtual aperture.Subsequently,since most of 2D DOA estimation methods are not universal to our proposed motion scheme and the reduced-dimensional(RD)method fails to handle the case of the coupled parameters,a decoupled reduced-complexity multiple signals classification(DRC MUSIC)algorithm is designed specifically.Simulation results demonstrate that:a)our proposed scheme can achieve underdetermined 2D DOA estimation just by the linear arrays;b)our designed DRC MUSIC algorithm has the good properties of high accuracy and low complexity;c)our proposed motion scheme with the DRC method has better universality in the motion direction. 展开更多
关键词 2D DOA estimation linear array motion reduced complexity synthetic aperture
下载PDF
基于种群胁迫的有限齿侧空间高速充种理论与试验
2
作者 胡斌 蔡一全 +4 位作者 罗昕 毛自斌 李俊伟 郭孟宇 王剑 《吉林大学学报(工学版)》 EI CAS CSCD 北大核心 2024年第2期574-588,共15页
针对型孔式穴播器在高速作业(大于4 km/h)时的起拱、漏充问题,提出基于种群胁迫的有限齿侧空间(也称持种空间)引导的排列、调姿高速充种新方法并设计了相应的取种盘。通过建立有限齿侧空间内棉种充填过程的运动学模型对排列、调姿的棉... 针对型孔式穴播器在高速作业(大于4 km/h)时的起拱、漏充问题,提出基于种群胁迫的有限齿侧空间(也称持种空间)引导的排列、调姿高速充种新方法并设计了相应的取种盘。通过建立有限齿侧空间内棉种充填过程的运动学模型对排列、调姿的棉种进行力学分析,阐述了本方法如何通过半精量充种、自适应调姿排列迁移、旋转定量充填3个阶段一步步定量分离种子,从而避免种子在充种过程中起拱、漏充问题。采用Box-Behnken中心组合方法进行了三因素三水平回归正交试验,分别建立单粒率、空穴率和多粒率多的元回归模型,以单粒率、空穴率和多粒率为目标,对各影响因素参数进行了优化,最优参数组合为:摩擦因数为0.46,种群高度为0.4 kg(本文采用种子在穴播器内的总用质量代替其在穴播器内的种群高度),转速为1.8 r/s(线速度为9.36 km/s),此时单粒率为98.03%,空穴率为0.40%,多粒率为1.57%,在此条件下,台架试验单粒率为92.86%、空穴率为6.43%,多粒率为0.71%,与仿真结果误差较小。 展开更多
关键词 机械设计及理论 穴播器 齿侧空间 高速 排列调姿
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部