A new motion compensated 3 D wavelet transform (MC 3DWT) video coding scheme is presented in this paper. The new coding scheme has a good performance in average PSNR, compression ratio and visual quality of reconst...A new motion compensated 3 D wavelet transform (MC 3DWT) video coding scheme is presented in this paper. The new coding scheme has a good performance in average PSNR, compression ratio and visual quality of reconstructions compared with the existing 3 D wavelet transform (3DWT) coding methods and motion compensated 2 D wavelet transform (MC WT) coding method. The new MC 3DWT coding scheme is suitable for very low bit rate video coding.展开更多
Fatigue cracks that develop in civil infrastructure such as steel bridges due to repetitive loads pose a major threat to structural integrity.Despite being the most common practice for fatigue crack detection,human vi...Fatigue cracks that develop in civil infrastructure such as steel bridges due to repetitive loads pose a major threat to structural integrity.Despite being the most common practice for fatigue crack detection,human visual inspection is known to be labor intensive,time-consuming,and prone to error.In this study,a computer vision-based fatigue crack detection approach using a short video recorded under live loads by a moving consumer-grade camera is presented.The method detects fatigue crack by tracking surface motion and identifies the differential motion pattern caused by opening and closing of the fatigue crack.However,the global motion introduced by a moving camera in the recorded video is typically far greater than the actual motion associated with fatigue crack opening/closing,leading to false detection results.To overcome the challenge,global motion compensation(GMC)techniques are introduced to compensate for camera-induced movement.In particular,hierarchical model-based motion estimation is adopted for 2D videos with simple geometry and a new method is developed by extending the bundled camera paths approach for 3D videos with complex geometry.The proposed methodology is validated using two laboratory test setups for both in-plane and out-of-plane fatigue cracks.The results confirm the importance of motion compensation for both 2D and 3D videos and demonstrate the effectiveness of the proposed GMC methods as well as the subsequent crack detection algorithm.展开更多
Synthetic aperture radar(SAR) is usually sensitive to trajectory deviations that cause serious motion error in the recorded data. In this paper, a coherent range-dependent mapdrift(CRDMD) algorithm is developed to acc...Synthetic aperture radar(SAR) is usually sensitive to trajectory deviations that cause serious motion error in the recorded data. In this paper, a coherent range-dependent mapdrift(CRDMD) algorithm is developed to accommodate the range-variant motion errors. By utilizing the algorithm as an estimate core, robust motion compensation strategy is proposed for unmanned aerial vehicle(UAV) SAR imagery. CRDMD outperforms the conventional map-drift algorithms in both accuracy and efficiency. Real data experiments show that the proposed approach is appropriate for precise motion compensation for UAV SAR.展开更多
The application of the vertical hoisting jack and wave motion compensation techniques to the salvage of an ancient sunken boat is introduced. The boat is wooden, loaded with cultural relics. It has been immersed at th...The application of the vertical hoisting jack and wave motion compensation techniques to the salvage of an ancient sunken boat is introduced. The boat is wooden, loaded with cultural relics. It has been immersed at the bottom of the South China Sea for more than 800 years. In order to protect the structure of the boat and the cultural relics inside to the largest extent, an open caisson is used to hold the sunken beat and the silts around before they are raised from the seabed all together as a whole. In the paper, first, the seakeeping model test of the system of the salvage barge and the open caisson is done to determine some important wave response parameters. And then a further experimental study of the ap- plication of the vertical hoisting jack and wave motion compensation scheme to the salvage of the sunken boat is carried out. In the model tests, the techniques of the integrative mechanic-electronic-hydraulic control, wave motion forecast and wave motion compensation are used to minimize the heave motion of the open caisson. The results of the model tests show that the heave motion of the open caisson can be reduced effectively by the use of the present method.展开更多
Existing errors in the structure and kinematic parameters of multi-legged walking robots,the motion trajectory of robot will diverge from the ideal sports requirements in movement.Since the existing error compensation...Existing errors in the structure and kinematic parameters of multi-legged walking robots,the motion trajectory of robot will diverge from the ideal sports requirements in movement.Since the existing error compensation is usually used for control compensation of manipulator arm,the error compensation of multi-legged robots has seldom been explored.In order to reduce the kinematic error of robots,a motion error compensation method based on the feedforward for multi-legged mobile robots is proposed to improve motion precision of a mobile robot.The locus error of a robot body is measured,when robot moves along a given track.Error of driven joint variables is obtained by error calculation model in terms of the locus error of robot body.Error value is used to compensate driven joint variables and modify control model of robot,which can drive the robots following control model modified.The model of the relation between robot's locus errors and kinematic variables errors is set up to achieve the kinematic error compensation.On the basis of the inverse kinematics of a multi-legged walking robot,the relation between error of the motion trajectory and driven joint variables of robots is discussed.Moreover,the equation set is obtained,which expresses relation among error of driven joint variables,structure parameters and error of robot's locus.Take MiniQuad as an example,when the robot MiniQuad moves following beeline tread,motion error compensation is studied.The actual locus errors of the robot body are measured before and after compensation in the test.According to the test,variations of the actual coordinate value of the robot centroid in x-direction and z-direction are reduced more than one time.The kinematic errors of robot body are reduced effectively by the use of the motion error compensation method based on the feedforward.展开更多
Inverse synthetic aperture radar(ISAR)imaging of the target with the non-rigid body is very important in the field of radar signal processing.In this paper,a motion compensation method combined with the preprocessing ...Inverse synthetic aperture radar(ISAR)imaging of the target with the non-rigid body is very important in the field of radar signal processing.In this paper,a motion compensation method combined with the preprocessing and global technique is proposed to reduce the influence of micro-motion components in the fast time domain,and the micro-Doppler(m-D)signal in the slow time domain is separated by the improved complex-valued empirical-mode decomposition(CEMD)algorithm,which makes the m-D signal more effectively distinguishable from the signal for the main body by translating the target to the Doppler center.Then,a better focused ISAR image of the target with the non-rigid body can be obtained consequently.Results of the simulated and raw data demonstrate the effectiveness of the algorithm.展开更多
After analyzing the characteristics of airborne SAR motion deviation in detail, a new realization method for airborne SAR motion compensation based on two-dimensional division processing is described. By combining the...After analyzing the characteristics of airborne SAR motion deviation in detail, a new realization method for airborne SAR motion compensation based on two-dimensional division processing is described. By combining the division of local tracks in azimuth direction and the division of sub-mapping strips in range direction, the motion deviation will be compensated accurately. Furthermore, both theoretic analysis and simulation result show that by using this method the problems of motion compensation under complex condition with large motion deviation and large mapping strip width can be resolved well.展开更多
Inertial measurement unit (IMU) is a standard motion sensor in modern airborne SAR systems. But how to remove its systematic error is a difficult problem, which impacts the improvement of resolution in azimuth. The te...Inertial measurement unit (IMU) is a standard motion sensor in modern airborne SAR systems. But how to remove its systematic error is a difficult problem, which impacts the improvement of resolution in azimuth. The technique of motion compensation presented in this paper, uses the GPS as a reference system to estimate and correct the systematic error of the IMU on the concept of linear unbiased minimum variance (LUMV). This new and effective method achieves very accurate position measurement (both high and low frequency) of the APC in not only short but also long terms, so that it can satisfy the requirement of high resolution airborne SAR. In the last section of the paper, some experimental simulations from raw data are given.展开更多
MOtion COmpensation(MOCO) is an essential step in high resolution airborne Synthetic Aperture Radar(SAR) imaging. Generally, a reference altitude level is assumed and external Digital Elevation Model(DEM) is required ...MOtion COmpensation(MOCO) is an essential step in high resolution airborne Synthetic Aperture Radar(SAR) imaging. Generally, a reference altitude level is assumed and external Digital Elevation Model(DEM) is required for the scene topography heavily varied. To overcome the shortcoming, we propose a MOCO method based on Phase Gradient Autofocus(PGA) which can obtain well focused images without DEM. In the implementation, we first compensate the normal range-invariant term. Then the data are divided into strips in range-compressed domain and PGA is applied to each substrip to extract the phase errors. Finally, the phase error surface is obtained using interpolation and then compensated. Real airborne SAR data of a UAV-SAR system experiments and comparisons demonstrate the validity and effectiveness of the proposed algorithm. The results show that our algorithm is effective.展开更多
To compensate motion errors of images from the parallel-track bistatic synthetic aperture radar(BiSAR),an improved chirp scaling algorithm(CSA) is proposed.Since velocity vector of the moving aircrafts in the para...To compensate motion errors of images from the parallel-track bistatic synthetic aperture radar(BiSAR),an improved chirp scaling algorithm(CSA) is proposed.Since velocity vector of the moving aircrafts in the parallel-track BiSAR system can not remain invariant in an aperture,an actual aperture is divided into subapertures so that it is reasonable to assume that the aircrafts move with constant acceleration vector in a subaperture.Based on this model,an improved CSA is derived.The new phase factors incorporate three-dimensional acceleration and velocity.The motion compensation procedure is integrated into the CSA without additional operation required.The simulation results show that the presented algorithm can efficiently resolve motion compensation for parallel-track BiSAR.展开更多
An adaptive de-interlacing algorithm based on motion compensation is presented. It consists of the detection of motion blocks, the adaptive motion estimation with Kalman filtering, and the motion compensation for moti...An adaptive de-interlacing algorithm based on motion compensation is presented. It consists of the detection of motion blocks, the adaptive motion estimation with Kalman filtering, and the motion compensation for motion blocks and field repetition for static blocks. The detection of motion blocks can accurately identify the motion blocks by using successive 4-field images. The motion estimation module with Kalman filtering searches motion vectors only for motion blocks, and the search model is adaptive to motion velocity and acceleration. Two de-interlacing methods are adopted to satisfy the different requirements of motion blocks and static blocks. Compared with full search algorithm, the proposed algorithm greatly reduces the computational amount while keeping the performance approximately.展开更多
An efficient compression coding system for motion images is presented. A macro-block matchingtechnique based on tile correlation betweell motion vectors is applied to the system. This technique effectivelyimproves the...An efficient compression coding system for motion images is presented. A macro-block matchingtechnique based on tile correlation betweell motion vectors is applied to the system. This technique effectivelyimproves the accuracy and the speed of motion estimation, and the compression ratio. A compression ratio of 29 isattainable without visible image degradation.展开更多
In this paper an effective MC + FGSST structure is explored, which is appropriate for scalable video coding. The structure obtains spatio-temporal-SNR fine granular scalability, and achieves high coding efficiency at...In this paper an effective MC + FGSST structure is explored, which is appropriate for scalable video coding. The structure obtains spatio-temporal-SNR fine granular scalability, and achieves high coding efficiency at the same time. Users can acquire their necessary scalability by choosing and combining them. Then, a high-powered codec solution based on this structure is presented. Subsequently, a focus issue on the right number of bit-planes should be used for motion compensation is discussed, and an algorithm is presented for this issue. The proposed codec saves a lot of hardware expense. Simulation results indicate that the performance of MC + FGSST structure is superior to that of FGSST structure.展开更多
This paper presented a new solution for motion compensation module in the high definition television (HDTV) video decoder. The overall architecture and the design of the major functional units, such as the motion vect...This paper presented a new solution for motion compensation module in the high definition television (HDTV) video decoder. The overall architecture and the design of the major functional units, such as the motion vector decoder, the predictor, and the mixer, were discussed. Based on the exploitation of the special characteristics inherent in the motion compensation algorithm, the motion compensation module and its functional units adopt various novel architectures in order to allow the module to meet real-time constraints. This solution resolves the problem of high hardware costs, low bus efficiency and complex control schemes in conventional designs.展开更多
To enhance the image motion compensation accuracy of off-axis three-mirror anastigmatic( TMA)three-line array aerospace mapping cameras,a new method of image motion velocity field modeling is proposed in this paper. F...To enhance the image motion compensation accuracy of off-axis three-mirror anastigmatic( TMA)three-line array aerospace mapping cameras,a new method of image motion velocity field modeling is proposed in this paper. Firstly,based on the imaging principle of mapping cameras,an analytical expression of image motion velocity of off-axis TMA three-line array aerospace mapping cameras is deduced from different coordinate systems we established and the attitude dynamics principle. Then,the case of a three-line array mapping camera is studied,in which the simulation of the focal plane image motion velocity fields of the forward-view camera,the nadir-view camera and the backward-view camera are carried out,and the optimization schemes for image motion velocity matching and drift angle matching are formulated according the simulation results. Finally,this method is verified with a dynamic imaging experimental system. The results are indicative of that when image motion compensation for nadir-view camera is conducted using the proposed image motion velocity field model,the line pair of target images at Nyquist frequency is clear and distinguishable. Under the constraint that modulation transfer function( MTF) reduces by 5%,when the horizontal frequencies of the forward-view camera and the backward-view camera are adjusted uniformly according to the proposed image motion velocity matching scheme,the time delay integration( TDI) stages reach 6 at most. When the TDI stages are more than 6,the three groups of camera will independently undergo horizontal frequency adjustment. However, when the proposed drift angle matching scheme is adopted for uniform drift angle adjustment,the number of TDI stages will not exceed 81. The experimental results have demonstrated the validity and accuracy of the proposed image motion velocity field model and matching optimization scheme,providing reliable basis for on-orbit image motion compensation of aerospace mapping cameras.展开更多
MPEG-4 fine-granularity-scalable (FGS) technology is an effective solution to resolve the network bandwidth varying because FGS provides very fine granular SNR scalability. However, this scalability is obtained with...MPEG-4 fine-granularity-scalable (FGS) technology is an effective solution to resolve the network bandwidth varying because FGS provides very fine granular SNR scalability. However, this scalability is obtained with sacrifice of coding efficiency. An one-loop FGS structure is presented based on motion compensation (MC + FGS) to improve the coding efficiency of base FGS. Then it describes and discusses the hybrid spatial-SNR FGS (FGSS) structure that extends SNR scalability of FGS to spatial scalability (spatio-SNR scalability). FGSS structure inherent the low coding efficiency of FGS structure. Combining MC + FGS structure with FGSS structure, a structure of MC + FGSS structure is obtained which acquires both structures' advantages and counteracts both structures' defects. Experimental results prove the MC+ FGSS structure not only obtains fine granular spatio-SNR scalability, but also achieves high coding efficiency.展开更多
A feedforward compensation naethod of the motion errors of NC machine tools imple- mented with software is proposed , with which the motion errors can be compensated whithout changing the original computer control sys...A feedforward compensation naethod of the motion errors of NC machine tools imple- mented with software is proposed , with which the motion errors can be compensated whithout changing the original computer control systems of the NC machine tools. The experimental results show that the circular interpolation profile machining errors decrease by a factor of 2/3 after com- pensated.展开更多
A novel reference-driven method for MR image reconstruction based on wavelet sparsity and nonlocal total variation(NLTV)is proposed.Utilizing the sparsity of the difference image between the target image and the mot...A novel reference-driven method for MR image reconstruction based on wavelet sparsity and nonlocal total variation(NLTV)is proposed.Utilizing the sparsity of the difference image between the target image and the motion-compensated reference image in wavelet transform domain,the proposed method does not need to estimate contrast changes and therefore increases computational efficiency.Additionally,NLTV regularization is applied to preserve image details and features without blocky effects.An efficient alternating iterative algorithm is used to estimate motion effects and reconstruct the difference image.Experimental results demonstrate that the proposed method can significantly reduce sampling rate or improve the quality of the reconstructed image alternatively.展开更多
In this paper, an attempt at applying the cross range one dimensional ISAR processing for identifying the number of aircraft in formation flight is described. The procedure will succeed only if the translational mo...In this paper, an attempt at applying the cross range one dimensional ISAR processing for identifying the number of aircraft in formation flight is described. The procedure will succeed only if the translational motion of the target is compensated perfectly. The two dimensional ISAR motion compensation methods based on high resolution range profile, such as the scatter point referencing and the track the target centroid, can not be used here. The track fitting method, which can be used for one dimensional ISAR motion compensation, relies on a parametric model and suffers from a serious defect of large amount of computation. The authors proposed an iterative dominant scatterer method for one dimensional ISAR motion compensation. It is robust and nonparametric with low computational complexity. Live echo signals from two fighter planes in formation flight have been collected using an S band surveillance radar. The cross range one dimensional ISAR processing was done. Experimental results show that identifying the number of aircraft in formation flight via cross range one dimensional ISAR processing is feasible.展开更多
文摘A new motion compensated 3 D wavelet transform (MC 3DWT) video coding scheme is presented in this paper. The new coding scheme has a good performance in average PSNR, compression ratio and visual quality of reconstructions compared with the existing 3 D wavelet transform (3DWT) coding methods and motion compensated 2 D wavelet transform (MC WT) coding method. The new MC 3DWT coding scheme is suitable for very low bit rate video coding.
基金NCHRP Project,IDEA 223:Fatigue Crack Inspection using Computer Vision and Augmented Reality。
文摘Fatigue cracks that develop in civil infrastructure such as steel bridges due to repetitive loads pose a major threat to structural integrity.Despite being the most common practice for fatigue crack detection,human visual inspection is known to be labor intensive,time-consuming,and prone to error.In this study,a computer vision-based fatigue crack detection approach using a short video recorded under live loads by a moving consumer-grade camera is presented.The method detects fatigue crack by tracking surface motion and identifies the differential motion pattern caused by opening and closing of the fatigue crack.However,the global motion introduced by a moving camera in the recorded video is typically far greater than the actual motion associated with fatigue crack opening/closing,leading to false detection results.To overcome the challenge,global motion compensation(GMC)techniques are introduced to compensate for camera-induced movement.In particular,hierarchical model-based motion estimation is adopted for 2D videos with simple geometry and a new method is developed by extending the bundled camera paths approach for 3D videos with complex geometry.The proposed methodology is validated using two laboratory test setups for both in-plane and out-of-plane fatigue cracks.The results confirm the importance of motion compensation for both 2D and 3D videos and demonstrate the effectiveness of the proposed GMC methods as well as the subsequent crack detection algorithm.
基金supported by the Key R&D Program Projects in Hainan Province (ZDY 2019008)the State Key Laboratory of Rail T ransit Engineering Information (SKLK22-08)。
文摘Synthetic aperture radar(SAR) is usually sensitive to trajectory deviations that cause serious motion error in the recorded data. In this paper, a coherent range-dependent mapdrift(CRDMD) algorithm is developed to accommodate the range-variant motion errors. By utilizing the algorithm as an estimate core, robust motion compensation strategy is proposed for unmanned aerial vehicle(UAV) SAR imagery. CRDMD outperforms the conventional map-drift algorithms in both accuracy and efficiency. Real data experiments show that the proposed approach is appropriate for precise motion compensation for UAV SAR.
文摘The application of the vertical hoisting jack and wave motion compensation techniques to the salvage of an ancient sunken boat is introduced. The boat is wooden, loaded with cultural relics. It has been immersed at the bottom of the South China Sea for more than 800 years. In order to protect the structure of the boat and the cultural relics inside to the largest extent, an open caisson is used to hold the sunken beat and the silts around before they are raised from the seabed all together as a whole. In the paper, first, the seakeeping model test of the system of the salvage barge and the open caisson is done to determine some important wave response parameters. And then a further experimental study of the ap- plication of the vertical hoisting jack and wave motion compensation scheme to the salvage of the sunken boat is carried out. In the model tests, the techniques of the integrative mechanic-electronic-hydraulic control, wave motion forecast and wave motion compensation are used to minimize the heave motion of the open caisson. The results of the model tests show that the heave motion of the open caisson can be reduced effectively by the use of the present method.
基金supported by National Natural Science Foundation of China (Grant Nos. 50675079,50875246)Program for Innovative Research Team (in Science and Technology) in University of Henan Province,China
文摘Existing errors in the structure and kinematic parameters of multi-legged walking robots,the motion trajectory of robot will diverge from the ideal sports requirements in movement.Since the existing error compensation is usually used for control compensation of manipulator arm,the error compensation of multi-legged robots has seldom been explored.In order to reduce the kinematic error of robots,a motion error compensation method based on the feedforward for multi-legged mobile robots is proposed to improve motion precision of a mobile robot.The locus error of a robot body is measured,when robot moves along a given track.Error of driven joint variables is obtained by error calculation model in terms of the locus error of robot body.Error value is used to compensate driven joint variables and modify control model of robot,which can drive the robots following control model modified.The model of the relation between robot's locus errors and kinematic variables errors is set up to achieve the kinematic error compensation.On the basis of the inverse kinematics of a multi-legged walking robot,the relation between error of the motion trajectory and driven joint variables of robots is discussed.Moreover,the equation set is obtained,which expresses relation among error of driven joint variables,structure parameters and error of robot's locus.Take MiniQuad as an example,when the robot MiniQuad moves following beeline tread,motion error compensation is studied.The actual locus errors of the robot body are measured before and after compensation in the test.According to the test,variations of the actual coordinate value of the robot centroid in x-direction and z-direction are reduced more than one time.The kinematic errors of robot body are reduced effectively by the use of the motion error compensation method based on the feedforward.
基金supported by the National Natural Science Foundation of China(61871146)the Fundamental Research Funds for the Central Universitiesthe State Key Laboratory of Millimeter Waves(K202022)。
文摘Inverse synthetic aperture radar(ISAR)imaging of the target with the non-rigid body is very important in the field of radar signal processing.In this paper,a motion compensation method combined with the preprocessing and global technique is proposed to reduce the influence of micro-motion components in the fast time domain,and the micro-Doppler(m-D)signal in the slow time domain is separated by the improved complex-valued empirical-mode decomposition(CEMD)algorithm,which makes the m-D signal more effectively distinguishable from the signal for the main body by translating the target to the Doppler center.Then,a better focused ISAR image of the target with the non-rigid body can be obtained consequently.Results of the simulated and raw data demonstrate the effectiveness of the algorithm.
文摘After analyzing the characteristics of airborne SAR motion deviation in detail, a new realization method for airborne SAR motion compensation based on two-dimensional division processing is described. By combining the division of local tracks in azimuth direction and the division of sub-mapping strips in range direction, the motion deviation will be compensated accurately. Furthermore, both theoretic analysis and simulation result show that by using this method the problems of motion compensation under complex condition with large motion deviation and large mapping strip width can be resolved well.
文摘Inertial measurement unit (IMU) is a standard motion sensor in modern airborne SAR systems. But how to remove its systematic error is a difficult problem, which impacts the improvement of resolution in azimuth. The technique of motion compensation presented in this paper, uses the GPS as a reference system to estimate and correct the systematic error of the IMU on the concept of linear unbiased minimum variance (LUMV). This new and effective method achieves very accurate position measurement (both high and low frequency) of the APC in not only short but also long terms, so that it can satisfy the requirement of high resolution airborne SAR. In the last section of the paper, some experimental simulations from raw data are given.
文摘MOtion COmpensation(MOCO) is an essential step in high resolution airborne Synthetic Aperture Radar(SAR) imaging. Generally, a reference altitude level is assumed and external Digital Elevation Model(DEM) is required for the scene topography heavily varied. To overcome the shortcoming, we propose a MOCO method based on Phase Gradient Autofocus(PGA) which can obtain well focused images without DEM. In the implementation, we first compensate the normal range-invariant term. Then the data are divided into strips in range-compressed domain and PGA is applied to each substrip to extract the phase errors. Finally, the phase error surface is obtained using interpolation and then compensated. Real airborne SAR data of a UAV-SAR system experiments and comparisons demonstrate the validity and effectiveness of the proposed algorithm. The results show that our algorithm is effective.
文摘To compensate motion errors of images from the parallel-track bistatic synthetic aperture radar(BiSAR),an improved chirp scaling algorithm(CSA) is proposed.Since velocity vector of the moving aircrafts in the parallel-track BiSAR system can not remain invariant in an aperture,an actual aperture is divided into subapertures so that it is reasonable to assume that the aircrafts move with constant acceleration vector in a subaperture.Based on this model,an improved CSA is derived.The new phase factors incorporate three-dimensional acceleration and velocity.The motion compensation procedure is integrated into the CSA without additional operation required.The simulation results show that the presented algorithm can efficiently resolve motion compensation for parallel-track BiSAR.
文摘An adaptive de-interlacing algorithm based on motion compensation is presented. It consists of the detection of motion blocks, the adaptive motion estimation with Kalman filtering, and the motion compensation for motion blocks and field repetition for static blocks. The detection of motion blocks can accurately identify the motion blocks by using successive 4-field images. The motion estimation module with Kalman filtering searches motion vectors only for motion blocks, and the search model is adaptive to motion velocity and acceleration. Two de-interlacing methods are adopted to satisfy the different requirements of motion blocks and static blocks. Compared with full search algorithm, the proposed algorithm greatly reduces the computational amount while keeping the performance approximately.
文摘An efficient compression coding system for motion images is presented. A macro-block matchingtechnique based on tile correlation betweell motion vectors is applied to the system. This technique effectivelyimproves the accuracy and the speed of motion estimation, and the compression ratio. A compression ratio of 29 isattainable without visible image degradation.
基金Project supported by Key Disciplinary Development Program of Shanghai (Grant No. 2001 -44 ), and Science Foundation of Shanghai Municipal Commission of Education (Grant No. 03AQ86)
文摘In this paper an effective MC + FGSST structure is explored, which is appropriate for scalable video coding. The structure obtains spatio-temporal-SNR fine granular scalability, and achieves high coding efficiency at the same time. Users can acquire their necessary scalability by choosing and combining them. Then, a high-powered codec solution based on this structure is presented. Subsequently, a focus issue on the right number of bit-planes should be used for motion compensation is discussed, and an algorithm is presented for this issue. The proposed codec saves a lot of hardware expense. Simulation results indicate that the performance of MC + FGSST structure is superior to that of FGSST structure.
文摘This paper presented a new solution for motion compensation module in the high definition television (HDTV) video decoder. The overall architecture and the design of the major functional units, such as the motion vector decoder, the predictor, and the mixer, were discussed. Based on the exploitation of the special characteristics inherent in the motion compensation algorithm, the motion compensation module and its functional units adopt various novel architectures in order to allow the module to meet real-time constraints. This solution resolves the problem of high hardware costs, low bus efficiency and complex control schemes in conventional designs.
基金Sponsored by the National High Technology Research and Development Program of China(Grant No.863-2-5-1-13B)the Jilin Province Science and Technology Development Plan Item(Grant No.20130522107JH)
文摘To enhance the image motion compensation accuracy of off-axis three-mirror anastigmatic( TMA)three-line array aerospace mapping cameras,a new method of image motion velocity field modeling is proposed in this paper. Firstly,based on the imaging principle of mapping cameras,an analytical expression of image motion velocity of off-axis TMA three-line array aerospace mapping cameras is deduced from different coordinate systems we established and the attitude dynamics principle. Then,the case of a three-line array mapping camera is studied,in which the simulation of the focal plane image motion velocity fields of the forward-view camera,the nadir-view camera and the backward-view camera are carried out,and the optimization schemes for image motion velocity matching and drift angle matching are formulated according the simulation results. Finally,this method is verified with a dynamic imaging experimental system. The results are indicative of that when image motion compensation for nadir-view camera is conducted using the proposed image motion velocity field model,the line pair of target images at Nyquist frequency is clear and distinguishable. Under the constraint that modulation transfer function( MTF) reduces by 5%,when the horizontal frequencies of the forward-view camera and the backward-view camera are adjusted uniformly according to the proposed image motion velocity matching scheme,the time delay integration( TDI) stages reach 6 at most. When the TDI stages are more than 6,the three groups of camera will independently undergo horizontal frequency adjustment. However, when the proposed drift angle matching scheme is adopted for uniform drift angle adjustment,the number of TDI stages will not exceed 81. The experimental results have demonstrated the validity and accuracy of the proposed image motion velocity field model and matching optimization scheme,providing reliable basis for on-orbit image motion compensation of aerospace mapping cameras.
文摘MPEG-4 fine-granularity-scalable (FGS) technology is an effective solution to resolve the network bandwidth varying because FGS provides very fine granular SNR scalability. However, this scalability is obtained with sacrifice of coding efficiency. An one-loop FGS structure is presented based on motion compensation (MC + FGS) to improve the coding efficiency of base FGS. Then it describes and discusses the hybrid spatial-SNR FGS (FGSS) structure that extends SNR scalability of FGS to spatial scalability (spatio-SNR scalability). FGSS structure inherent the low coding efficiency of FGS structure. Combining MC + FGS structure with FGSS structure, a structure of MC + FGSS structure is obtained which acquires both structures' advantages and counteracts both structures' defects. Experimental results prove the MC+ FGSS structure not only obtains fine granular spatio-SNR scalability, but also achieves high coding efficiency.
文摘A feedforward compensation naethod of the motion errors of NC machine tools imple- mented with software is proposed , with which the motion errors can be compensated whithout changing the original computer control systems of the NC machine tools. The experimental results show that the circular interpolation profile machining errors decrease by a factor of 2/3 after com- pensated.
基金Supported by the National Natural Science Foundation of China(61077022)
文摘A novel reference-driven method for MR image reconstruction based on wavelet sparsity and nonlocal total variation(NLTV)is proposed.Utilizing the sparsity of the difference image between the target image and the motion-compensated reference image in wavelet transform domain,the proposed method does not need to estimate contrast changes and therefore increases computational efficiency.Additionally,NLTV regularization is applied to preserve image details and features without blocky effects.An efficient alternating iterative algorithm is used to estimate motion effects and reconstruct the difference image.Experimental results demonstrate that the proposed method can significantly reduce sampling rate or improve the quality of the reconstructed image alternatively.
文摘In this paper, an attempt at applying the cross range one dimensional ISAR processing for identifying the number of aircraft in formation flight is described. The procedure will succeed only if the translational motion of the target is compensated perfectly. The two dimensional ISAR motion compensation methods based on high resolution range profile, such as the scatter point referencing and the track the target centroid, can not be used here. The track fitting method, which can be used for one dimensional ISAR motion compensation, relies on a parametric model and suffers from a serious defect of large amount of computation. The authors proposed an iterative dominant scatterer method for one dimensional ISAR motion compensation. It is robust and nonparametric with low computational complexity. Live echo signals from two fighter planes in formation flight have been collected using an S band surveillance radar. The cross range one dimensional ISAR processing was done. Experimental results show that identifying the number of aircraft in formation flight via cross range one dimensional ISAR processing is feasible.