Analysis of an Axial-flux Slotted Limited-angle Torque Motor with Quasi-Halbach Array for Torque Performance Improvement

Better torque performance and higher reliability have long been the focus of research for slotted limited-angle torque motors(LATMs),which are primarily used to position first-stage valves in electrohydraulic servosystems.This paper presents a high reliability axial-flux slotted LATM with quasi-Halbach array for torque performance improvement including constant torque range(CTR)and output torque.Firstly,the structure with two sets of windings and the operation principle of the proposed slotted LATM is analyzed.Secondly,a brief design procedure is presented,the structure selections of open slot and double-stator single-rotor(DSSR)interior rotor with surface mounted quasi-Halbach permanent magnet(PM)array are illustrated,and the geometric parameters are optimized to obtain the optimal design of the proposed slotted LATM.Then,3-D finite-element method(FEM)is employed to compare the proposed slotted LATM with the conventional surface mounted PM slotted LATM in terms of cogging torque,no-load back EMF,and output torque,and the results show that the proposed LATM with quasi-Halbach array has a 10%improvement in output torque and a 25%improvement in CTR.Meanwhile,the flux linkages and torque performance of the two sets of windings under various conditions verify good magnetic isolation.Finally,prototypes of two different rotor types are manufactured and a series of experiments are performed to validate the analysis.

Stochastic fluctuations in the rotation of the bacterial flagellar motor

The bacterial flagellar motor is a nanometer-sized rotary motor that generates the torque to drive the rotation of the flagellar filament.The output torque is an important property of the motor.The motor rotation was usually monitored by attaching aμm-sized bead to a shortened flagellar filament,and the torque was extracted by calculating the torque due to the viscous drag of the medium on the bead rotation.We sought for an independent extraction of the torque from thermal fluctuation in the motor rotation using the fluctuation theorem(FT).However,we identified an overwhelming fluctuation beyond the thermal noise that precluded the use of FT.We further characterized the timescale and the amplitude of this fluctuation,finding that it was probably due to the stepping of the motor.The amplitude of torque fluctuation we characterized here provided new information on the torque-generating interaction potential curve.

Application for Optimization of New Soft Magnetic Material Motor by Taguchi Method

The application of new soft magnetic materials in permanent magnet motor can effectively reduce the loss of motor and improve the efficiency of motor. Taguchi method is a local multivariable and multi-objective optimization method widely used in various engineering problems, which can effectively improve the efficiency of engineering optimization. In this paper, based on a 25 kW, 1700 r/min three-phase permanent magnet motor, the relevant motor model is established in the finite element simulation software, and the relevant simulation analysis is carried out. Combined with Taguchi method optimization, the local optimal structure scheme is obtained. Through optimization, the motor can maintain high efficiency, reduce the cogging torque of the motor by 53.45%, reduce the torque ripple by 36.79%, and increase the torque generated by the permanent magnet per unit mass by 21.42%. Through this optimization, the overall performance of the motor has been significantly improved. The research content of this paper verifies the feasibility of the application of Taguchi method in the optimization of new soft magnetic material motor, provides a new idea for the optimization design of new soft magnetic material motor, and also provides a certain reference for the local multi-objective optimization of the electromagnetic structure of other similar motors.

Refined modeling and experimental verification of a torque motor for an electro-hydraulic servo valve

The Permanent Magnet Torque Motor(PMTM)is the key electro-mechanical conversion device in an Electro-Hydraulic Servo Valve(EHSV).In this work,a refined model of a PMTM is developed,considering the non-working air-gaps between the upper or lower yoke and the armature,the fringing effect at the limiting holes,and the nonlinear permeability of soft magnetic material.Based on the refined model,the influences of various factors on the calculation accuracy of the magnetic flux at the pole surfaces of the armature and the output torque are investigated.For verifying the validity of the refined model,a Finite Element Analysis(FEA)of the PMTM is conducted,and a test platform is constructed.Compared with existing models,the refined model can better reveal the intrinsic mechanism of the PMTM,and its calculations are more consistent with the FEA results.The experimental results of the armature deflection displacement show that the refined model can accurately describe the output characteristics of the PMTM.

A Fuzzy-based Sliding Mode Control Approach for Acceleration Slip Regulation of Battery Electric Vehicle

Due to quick response and large quantity of electric motor torque,the traction wheels of battery electric vehicle are easy to slip during the initial phase of starting.In this paper,a sliding mode control approach of acceleration slip regulation is designed to prevent the slip of the traction wheels.The wheel slip ratio is used as the state variable for the formulation of system dynamics model.The fuzzy algorithm is utilized to adjust the switch function of sliding mode controller.After stability and robustness analysis,the sliding mode control law is transferred into C code and downloaded into vehicle control unit,which is validated under wet and dry road conditions.The experimental results with a small overshoot and a quick response during starting indicate that the sliding mode controller has good control efect on the slip ratio regulation.This article proposes an acceleration slip regulation method that improves the safety during acceleration for battery electric vehicle.