Nitrogen removal via nitrite （the nitrite pathway） is more suitable for carbon-limited industrial wastewater. Partial nitrification to nitrite is the primary step to achieve nitrogen removal via nitrite. The effect ...Nitrogen removal via nitrite （the nitrite pathway） is more suitable for carbon-limited industrial wastewater. Partial nitrification to nitrite is the primary step to achieve nitrogen removal via nitrite. The effect of alkalinity on nitrite accumulation in a continuous process was investigated by progressively increasing the alkalinity dosage ratio （amount of alkalinity to ammonia ratio, mol/mol）. There is a close relationship among alkalinity, pH and the state of matter present in aqueous solution. When alkalinity was insufficient （compared to the theoretical alkalinity amount）, ammonia removal efficiency increased first and then decreased at each alkalinity dosage ratio, with an abrupt removal efficiency peak. Generally, ammonia removal efficiency rose with increasing alkalinity dosage ratio. Ammonia removal efficiency reached to 88% from 23% when alkalinity addition was sufficient. Nitrite accumulation could be achieved by inhibiting nitrite oxidizing bacteria （NOB） by free ammonia （FA） in the early period and free nitrous acid in the later period of nitrification when alkalinity was not adequate. Only FA worked to inhibit the activity of NOB when alkalinity addition was sufficient.展开更多
Five different internals were designed,and their effects on phase holdup and backmixing were investigated in a gas–liquid concurrent upflow reactor where the spherical alumina packing particles of three diameters(3.0...Five different internals were designed,and their effects on phase holdup and backmixing were investigated in a gas–liquid concurrent upflow reactor where the spherical alumina packing particles of three diameters(3.0,4.5 and6.0 mm)were slightly expanded under the conditions of varied superficial gas velocities(6.77×10-2-3.61×10-1 m·s-1)and superficial liquid velocities(9.47×10-4-2.17×10-3 m·s-1).The experimental results show that the gas holdup increases with the superficial gas velocity and particle size,opposite to the variational trend of liquid holdup.When an internal component is installed amid the upflow reactor,a higher gas holdup,a less liquid holdup and a larger Peclet number characterizing the weaker backmixing are obtained compared to those in the bed without internals under the same operating conditions.Additionally,the minimal backmixing is observed in the reactor equipped with the internals with a novel multi-step design.Finally,empirical correlations were proposed for estimating gas holdup,liquid holdup and Peclet number with the relative deviations within 11%,12%and 25%,respectively.展开更多
考察了方形径向流固定床煤热解反应器中变化煤层厚度对料层升温速度及煤热解产物分布特性的影响。随着料层厚度增加,导致煤热解反应要求的时间增长,热解水和气的产率相应增加,焦油和半焦收率逐渐降低,但焦油中轻质组分(沸点低于360℃组...考察了方形径向流固定床煤热解反应器中变化煤层厚度对料层升温速度及煤热解产物分布特性的影响。随着料层厚度增加,导致煤热解反应要求的时间增长,热解水和气的产率相应增加,焦油和半焦收率逐渐降低,但焦油中轻质组分(沸点低于360℃组分)含量呈升高趋势,半焦和煤气热值稍许降低。如,加热壁温度900℃、从45 mm至105 mm增加煤料层厚度时,焦油产率从7.17%(质量,下同)下降到6.26%(相对干基煤),但焦油中的轻焦油组分含量则从67%升至72.7%,半焦产率由80.0%降至77.0%,热解水和煤气产率分别由6.96%和5.91%增至8.85%和7.90%,煤气热值则由24348.5 k J·m-3下降至20649.2 k J·m-3。所得半焦的热值径向上由高温侧向低温侧逐渐降低,煤料层越厚、热值降幅越大,而相同煤料层厚度处与加热壁平行的同一轴向平面上的半焦热值基本相同。针对研究的反应器,气相热解产物在反应器内沿径向(横向)由高温料层区向低温料层区流动。在该过程中伴随着热解产物对远离加热壁的低温煤料的传热、热解生成重质组分的冷凝和在煤/半焦颗粒表面的吸附截留,进而在低温料层进一步升高温度时发生二次裂解等物理化学过程。反应器内煤层厚度越大,上述各种伴随的物化作用越显著,从而明显影响煤料层的升温及热解特性。展开更多
基金supported by the State Key Laboratory of Urban Water Resource and Environment,Harbin Institute of Technology(No.2013DX10)the National Water Special Funds of China(No.2008ZX07207)
文摘Nitrogen removal via nitrite （the nitrite pathway） is more suitable for carbon-limited industrial wastewater. Partial nitrification to nitrite is the primary step to achieve nitrogen removal via nitrite. The effect of alkalinity on nitrite accumulation in a continuous process was investigated by progressively increasing the alkalinity dosage ratio （amount of alkalinity to ammonia ratio, mol/mol）. There is a close relationship among alkalinity, pH and the state of matter present in aqueous solution. When alkalinity was insufficient （compared to the theoretical alkalinity amount）, ammonia removal efficiency increased first and then decreased at each alkalinity dosage ratio, with an abrupt removal efficiency peak. Generally, ammonia removal efficiency rose with increasing alkalinity dosage ratio. Ammonia removal efficiency reached to 88% from 23% when alkalinity addition was sufficient. Nitrite accumulation could be achieved by inhibiting nitrite oxidizing bacteria （NOB） by free ammonia （FA） in the early period and free nitrous acid in the later period of nitrification when alkalinity was not adequate. Only FA worked to inhibit the activity of NOB when alkalinity addition was sufficient.
基金Supported by the National Key Research and Development Program(2016YFB0301701)the National Natural Science Foundation of China(21776283,21427814)+1 种基金Key Research Program of Frontier Sciences of CAS(QYZDJ-SSW-JSC030)the Instrument Developing Project of Chinese Academy of Sciences(YZ201641)and Petro China.
文摘Five different internals were designed,and their effects on phase holdup and backmixing were investigated in a gas–liquid concurrent upflow reactor where the spherical alumina packing particles of three diameters(3.0,4.5 and6.0 mm)were slightly expanded under the conditions of varied superficial gas velocities(6.77×10-2-3.61×10-1 m·s-1)and superficial liquid velocities(9.47×10-4-2.17×10-3 m·s-1).The experimental results show that the gas holdup increases with the superficial gas velocity and particle size,opposite to the variational trend of liquid holdup.When an internal component is installed amid the upflow reactor,a higher gas holdup,a less liquid holdup and a larger Peclet number characterizing the weaker backmixing are obtained compared to those in the bed without internals under the same operating conditions.Additionally,the minimal backmixing is observed in the reactor equipped with the internals with a novel multi-step design.Finally,empirical correlations were proposed for estimating gas holdup,liquid holdup and Peclet number with the relative deviations within 11%,12%and 25%,respectively.
文摘考察了方形径向流固定床煤热解反应器中变化煤层厚度对料层升温速度及煤热解产物分布特性的影响。随着料层厚度增加,导致煤热解反应要求的时间增长,热解水和气的产率相应增加,焦油和半焦收率逐渐降低,但焦油中轻质组分(沸点低于360℃组分)含量呈升高趋势,半焦和煤气热值稍许降低。如,加热壁温度900℃、从45 mm至105 mm增加煤料层厚度时,焦油产率从7.17%(质量,下同)下降到6.26%(相对干基煤),但焦油中的轻焦油组分含量则从67%升至72.7%,半焦产率由80.0%降至77.0%,热解水和煤气产率分别由6.96%和5.91%增至8.85%和7.90%,煤气热值则由24348.5 k J·m-3下降至20649.2 k J·m-3。所得半焦的热值径向上由高温侧向低温侧逐渐降低,煤料层越厚、热值降幅越大,而相同煤料层厚度处与加热壁平行的同一轴向平面上的半焦热值基本相同。针对研究的反应器,气相热解产物在反应器内沿径向(横向)由高温料层区向低温料层区流动。在该过程中伴随着热解产物对远离加热壁的低温煤料的传热、热解生成重质组分的冷凝和在煤/半焦颗粒表面的吸附截留,进而在低温料层进一步升高温度时发生二次裂解等物理化学过程。反应器内煤层厚度越大,上述各种伴随的物化作用越显著,从而明显影响煤料层的升温及热解特性。
